[DOC] config_example.toml output filtering

config_example.toml

@@ -1,3 +1,7 @@
+# This is the config file for Yanic written in "Tom's Obvious, Minimal Language."
+# syntax: https://github.com/toml-lang/toml
+# (if you need somethink multiple times, checkout out the [[table]] section)
+
 # Send respondd request to update information
 [respondd]
 enable           = true
@@ -34,21 +38,55 @@ save_interval = "5s"
 offline_after = "10m"
 
 
-## [[nodes.output.-]]
-# every output:
-#  needs to be enabled just adding:
-#    enable = true
-#  could filter the nodes by using a there filter entry (see output meshviewer)
-#   [nodes.output.-.filter]
-#  could be used multiple times (suggested by the "[[...]]" instatt of "[...]")
-#  it is useful for e.g. filter by different array and use multiple meshviewers
+## [[nodes.output.example]]
+# Each output format has its own config block and needs to be enabled by adding:
+#enable = true
+#
+# For each output format there can be set different filters
+#[nodes.output.example.filter]
+#
+# Set to false, if you want the json files to contain the owner information
+#no_owner = true
+#
+# List of nodeids of nodes that should be filtered out, so they won't appear in output
+#blacklist = ["00112233445566", "1337f0badead"]
+#
+# set has_location to true if you want to include only nodes that have geo-coordinates set
+# (setting this to false has no sensible effect, unless you'd want to hide nodes that have coordinates)
+#has_location = true
 
+#[nodes.output.example.filter.in_area]
+# nodes outside this area are not shown on the map but are still listed as a node without coordinates
+#latitude_min = 34.30
+#latitude_max = 71.85
+#longitude_min = -24.96
+#longitude_max = 39.72
+
+
+# definition for the new more compressed meshviewer.json
+[[nodes.output.meshviewer-ffrgb]]
+enable   = true
+path = "/var/www/html/meshviewer/data/meshviewer.json"
+
+#[nodes.output.meshviewer-ffrgb.filter]
+#no_owner = false
+#blacklist = ["00112233445566", "1337f0badead"]
+#has_location = true
+
+#[nodes.output.meshviewer-ffrgb.filter.in_area]
+#latitude_min = 34.30
+#latitude_max = 71.85
+#longitude_min = -24.96
+#longitude_max = 39.72
+
+
+# definition for nodes.json
 [[nodes.output.meshviewer]]
-enable = true
+enable = false
 # The structure version of the output which should be generated (i.e. nodes.json)
 # version 1 is accepted by the legacy meshviewer (which is the master branch)
 #   i.e. https://github.com/ffnord/meshviewer/tree/master
-# version 2 is accepted by the new versions of meshviewer (which are in legacy develop branch or newer)
+# version 2 is accepted by the new versions of meshviewer (which are in the legacy develop branch or newer)
 #   i.e. https://github.com/ffnord/meshviewer/tree/dev
 #        https://github.com/ffrgb/meshviewer/tree/develop
 version    = 2
@@ -57,25 +95,18 @@ nodes_path = "/var/www/html/meshviewer/data/nodes.json"
 # path where to store graph.json
 graph_path = "/var/www/html/meshviewer/data/graph.json"
 
+#[nodes.output.meshviewer.filter]
+#no_owner = false
 
-[nodes.output.meshviewer.filter]
-# no_owner = true
-has_location = true
-blacklist = ["vpnid"]
-
-[nodes.output.meshviewer.filter.in_area]
-latitude_min = 34.30
-latitude_max = 71.85
-longitude_min = -24.96
-longitude_max = 39.72
 
+# definition for nodelist.json
 [[nodes.output.nodelist]]
 enable   = true
 path = "/var/www/html/meshviewer/data/nodelist.json"
 
-[[nodes.output.meshviewer-ffrgb]]
-enable   = true
-path = "/var/www/html/meshviewer/data/meshviewer.json"
+#[nodes.output.nodelist.filter]
+#no_owner = false
+
 
 
 [database]
@@ -85,12 +116,9 @@ delete_after    = "7d"
 # how often run the cleaning
 delete_interval = "1h"
 
-## [[database.connection.-]]
-# every output:
-#  needs to be enabled just adding:
-#    enable = true
-#  could be used multiple times (suggested by the "[[...]]" instatt of "[...]")
-#  it is useful for e.g. save into a database before and behind a firewall
+## [[database.connection.example]]
+# Each database-connection has its own config block and needs to be enabled by adding:
+#enable = true
 
 # Save collected data to InfluxDB.
 # There are the following measurments: