Support for Meraki devices (MR12/16/62/66) has been removed for now because of
severe problems (all devices were using the same MAC addresses). Support will return
when the issues have been fixed.
Bugfixes
~~~~~~~~
* Automatically restart respondd on failure (`#863 <https://github.com/freifunk-gluon/gluon/issues/863>`_)
There have been many reports of respondd processes disappearing; the exact cause is unclear,
but might be related to the batman-adv debugfs interface and/or out-of-memory conditions.
A new respondd initscript uses procd to automatically restart respondd when it dies.
* Make autoupdater timeouts more robust (`#987 <https://github.com/freifunk-gluon/gluon/issues/987>`_)
It was reported that wget processes sometimes hang indefinitely during the autoupdater manifest
download. The autoupdater has been improved to ensure that wget can always be interrupted after
a timeout.
This issue, together with the recent addition of lock files to ensure that only one instance
of the autoupdater can run at a time, had caused the autoupdater to blocked completely
by hanging processes in some cases (till a node was rebooted).
* Fix regulation domain switching in ath10k (`#1001 <https://github.com/freifunk-gluon/gluon/pull/1001>`_)
Prevents use of too high transmission power in some cases.
* Ensure that *prefix6* in site.conf is always a /64 prefix (`6b62e2f <https://github.com/freifunk-gluon/gluon/commit/6b62e2fc788cd1f83f6634288a15724dfc42b0fd>`_)
Other prefix lengths were never supported and don't make sense in many places the prefix is used. Ensure
that such configurations will not pass validation.
Known Issues
~~~~~~~~~~~~
* Default TX power on many Ubiquiti devices is too high, correct offsets are unknown (`#94 <https://github.com/freifunk-gluon/gluon/issues/94>`_)
Reducing the TX power in the Advanced Settings is recommended.
* The MAC address of the WAN interface is modified even when Mesh-on-WAN is disabled (`#496 <https://github.com/freifunk-gluon/gluon/issues/496>`_)
