gluon/targets/ipq40xx-generic

147 lines
2.7 KiB
Plaintext
Raw Permalink Normal View History

local ATH10K_PACKAGES_IPQ40XX = {
'kmod-ath10k',
'-kmod-ath10k-ct',
'-kmod-ath10k-ct-smallbuffers',
'ath10k-firmware-qca4019',
'-ath10k-firmware-qca4019-ct',
}
local ATH10K_PACKAGES_IPQ40XX_QCA9888 = {
'kmod-ath10k',
'-kmod-ath10k-ct',
'-kmod-ath10k-ct-smallbuffers',
'ath10k-firmware-qca4019',
'-ath10k-firmware-qca4019-ct',
'ath10k-firmware-qca9888',
'-ath10k-firmware-qca9888-ct',
}
local ATH10K_PACKAGES_IPQ40XX_SMALLBUFFERS = {
'-kmod-ath10k',
'kmod-ath10k-smallbuffers',
'-kmod-ath10k-ct',
'-kmod-ath10k-ct-smallbuffers',
'ath10k-firmware-qca4019',
'-ath10k-firmware-qca4019-ct',
}
defaults {
packages = ATH10K_PACKAGES_IPQ40XX,
}
-- Aruba
device('aruba-ap-303', 'aruba_ap-303', {
factory = false,
aliases = {'aruba-instant-on-ap11'},
})
ipq40xx: add support for Aruba AP-303H / Instant ON AP11D (#2302) - [x] must be flashable from vendor firmware - [ ] webinterface - [ ] tftp - [x] other: Console port available. Manufacturer specific cable required. Tutorial in OpenWRT commit message https://git.openwrt.org/?p=openwrt/openwrt.git;a=commit;h=c6e972c8772a628a1a2f2e5590d7c6f4acef9ab0 - [x] must support upgrade mechanism - [x] must have working sysupgrade - [x] must keep/forget configuration (if applicable) *think `sysupgrade [-n]` or `firstboot`* - [x] must have working autoupdate root@Aruba-AP-303H:~# lua -e 'print(require("platform_info").get_image_name())' aruba-ap-303h - [x] reset/wps/phone button must return device into config mode - [x] primary mac should match address on device label (or packaging) (https://gluon.readthedocs.io/en/latest/dev/hardware.html#notes) - wired network - [x] should support all network ports on the device - [x] must have correct port assignment (WAN/LAN) - wifi (if applicable) - [x] association with AP must be possible on all radios - [x] association with 802.11s mesh must be working on all radios - [x] ap/mesh mode must work in parallel on all radios - led mapping - power/sys led (_critical, because led definitions are setup on firstboot only_) - [x] lit while the device is on - [x] should display config mode blink sequence (https://gluon.readthedocs.io/en/latest/features/configmode.html) - radio leds - [x] should map to their respective radio - [x] should show activity - switchport leds - [x] should map to their respective port (or switch, if only one led present) - [x] should show link state and activity - outdoor devices only - [ ] added board name to `is_outdoor_device` function in `package/gluon-core/luasrc/usr/lib/lua/gluon/platform.lua` - ToDo (upstream): - enable PoE pass through on interface E3 system.poe_passthrough=gpio_switch system.poe_passthrough.name='PoE Passthrough' system.poe_passthrough.gpio_pin='446' system.poe_passthrough.value='0' (0 is active)
2021-09-01 21:31:01 +00:00
device('aruba-ap-303h', 'aruba_ap-303h', {
factory = false,
aliases = {'aruba-instant-on-ap11d'},
})
device('aruba-ap-365', 'aruba_ap-365', {
factory = false,
aliases = {'aruba-instant-on-ap17'},
})
-- AVM
device('avm-fritz-box-4040', 'avm_fritzbox-4040', {
factory = false,
extra_images = {
{'-squashfs-eva', '-bootloader', '.bin'},
},
})
device('avm-fritz-box-7530', 'avm_fritzbox-7530', {
factory = false,
aliases = {'avm-fritz-box-7520'},
})
device('avm-fritz-repeater-1200', 'avm_fritzrepeater-1200', {
factory = false,
})
-- EnGenius
device('engenius-ens620ext', 'engenius_ens620ext', {
factory = false,
extra_images = {
{'-squashfs-factory_30', '-factory_fw30', '.bin'},
{'-squashfs-factory_35', '-factory_fw35', '.bin'},
},
})
-- GL.iNet
device('gl.inet-gl-ap1300', 'glinet_gl-ap1300', {
factory = '-squashfs-nand-factory',
factory_ext = '.ubi',
sysupgrade = '-squashfs-nand-sysupgrade',
sysupgrade_ext = '.bin',
})
device('gl.inet-gl-b1300', 'glinet_gl-b1300', {
factory = false,
})
2020-05-03 21:05:39 +00:00
-- Linksys
device('linksys-ea6350v3', 'linksys_ea6350v3')
-- NETGEAR
device('netgear-ex6100v2', 'netgear_ex6100v2', {
factory_ext = '.img',
})
device('netgear-ex6150v2', 'netgear_ex6150v2', {
factory_ext = '.img',
})
2018-06-03 08:52:47 +00:00
-- OpenMesh
device('openmesh-a42', 'openmesh_a42')
2018-06-03 08:52:47 +00:00
device('openmesh-a62', 'openmesh_a62', {
packages = ATH10K_PACKAGES_IPQ40XX_QCA9888,
})
-- Plasma Cloud
device('plasma-cloud-pa1200', 'plasmacloud_pa1200')
device('plasma-cloud-pa2200', 'plasmacloud_pa2200', {
packages = ATH10K_PACKAGES_IPQ40XX_QCA9888,
})
-- ZyXEL
device('zyxel-nbg6617', 'zyxel_nbg6617')
device('zyxel-wre6606', 'zyxel_wre6606', {
packages = ATH10K_PACKAGES_IPQ40XX_SMALLBUFFERS,
factory = false,
class = 'tiny', -- 128M ath10k + ath10k
})
-- 8devices
device('8devices-jalapeno', '8dev_jalapeno', {
factory = '-squashfs-nand-factory',
factory_ext = '.ubi',
sysupgrade = '-squashfs-nand-sysupgrade',
sysupgrade_ext = '.bin',
})