gluon/docs/releases/v2022.1.rst

418 lines
8.7 KiB
ReStructuredText
Raw Normal View History

Gluon 2022.1
============
Important notes
---------------
Upgrades to v2022.1 and later releases are only supported from releases v2020.1 and later. This is due to migrations that have been removed to simplify maintenance.
Added hardware support
----------------------
ath79-generic
~~~~~~~~~~~~~
- D-Link
- DAP-2660 A1
- Enterasys
- WS-AP3705i
- Siemens
- WS-AP3610
- TP-Link
- Archer A7 v5
- CPE510 v2
- CPE510 v3
- CPE710 v1
- EAP225-Outdoor v1
- WBS210 v2
ath79-mikrotik
~~~~~~~~~~~~~~
- Mikrotik
- RB951Ui-2nD
ipq40xx-generic
~~~~~~~~~~~~~~~
- Aruba Networks
- AP-303H
- AP-365
- InstantOn AP11D
- InstantOn AP17
ipq40xx-mikrotik
~~~~~~~~~~~~~~~~
- Mikrotik
- SXTsq-5-AC
ramips-mt7620
~~~~~~~~~~~~~
- Xiaomi
- Mi Router 3G (v2)
ramips-mt7621
~~~~~~~~~~~~~
- Cudy
- WR2100
- Netgear
- R6260
- WAC104
- WAX202
- TP-Link
- RE500
- RE650 v1
- Ubiquiti
- UniFi 6 Lite
- Xiaomi
- Mi Router 4A (Gigabit Edition)
ramips-mt7622
~~~~~~~~~~~~~
- Linksys
- E8450
- Xiaomi
- AX3200
- Ubiquiti
- UniFi 6 LR
ramips-mt76x8
~~~~~~~~~~~~~
- GL.iNet
- microuter-N300
- Netgear
- R6020
- RAVPower
- RP-WD009
- TP-Link
- Archer C20 v4
- Archer C20 v5
- RE200 v2
- RE305 v1
- Xiaomi
- Mi Router 4C
- Mi Router 4A (100M Edition)
rockchip-armv8
~~~~~~~~~~~~~~
- FriendlyElec
- NanoPi R2S
mpc85xx-p1010
~~~~~~~~~~~~~
- Sophos
- RED 15w rev. 1
mpc85xx-p1020
~~~~~~~~~~~~~
- Extreme Networks
- WS-AP3825i
Removed Devices
---------------
This list contains devices which do not have enough memory or flash to
be operated with this Gluon release.
- D-Link
- DIR-615 (C1, D1, D2, D3, D4, H1)
- Linksys
- WRT160NL
- TP-Link
- TL-MR13U (v1)
- TL-MR3020 (v1)
- TL-MR3040 (v1, v2)
- TL-MR3220 (v1, v2)
- TL-MR3420 (v1, v2)
- TL-WA701N/ND (v1, v2)
- TL-WA730RE (v1)
- TL-WA750RE (v1)
- TL-WA801N/ND (v1, v2, v3)
- TL-WA830RE (v1, v2)
- TL-WA850RE (v1)
- TL-WA860RE (v1)
- TL-WA901N/ND (v1, v2, v3, v4, v5)
- TL-WA7210N (v2)
- TL-WA7510N (v1)
- TL-WR703N (v1)
- TL-WR710N (v1, v2)
- TL-WR740N (v1, v3, v4, v5)
- TL-WR741N/ND (v1, v2, v4, v5)
- TL-WR743N/ND (v1, v2)
- TL-WR840N (v2)
- TL-WR841N/ND (v3, v5, v7, v8, v9, v10, v11, v12)
- TL-WR841N/ND (v1, v2)
- TL-WR843N/ND (v1)
- TL-WR940N (v1, v2, v3, v4, v5, v6)
- TL-WR941ND (v2, v3, v4, v5, v6)
- TL-WR1043N/ND (v1)
- WDR4900
- Ubiquiti
- AirGateway
- AirGateway Pro
- AirRouter
- Bullet
- LS-SR71
- Nanostation XM
- Nanostation Loco XM
- Picostation
- Unknown
- A5-V11
- VoCore
- VoCore (8M, 16M)
Atheros target migration
------------------------
All Atheros MIPS devices built with the ``ar71xx-generic``,
``ar71xx-nand`` as well as ``ar71xx-tiny`` were deprecated upstream and
are therefore not available with Gluon anymore.
Many devices previously built with ``ar71xx-generic`` and
``ar71xx-nand`` are now available with the ``ath79-generic`` as well as
``ath79-nand`` target respectively.
Missing devices
~~~~~~~~~~~~~~~
The following devices have not yet been integrated into Gluons ath79
targets.
- 8Devices
- Carambola 2
- Aerohive
- HiveAP 121
- Allnet
- ALL0315
- Buffalo
- WZR-HP-G300NH2
- WZR-HP-G450H
- GL.iNet
- 6408A v1
- NETGEAR
- WNDR4300
- WNDRMAC
- WNDRMAC v2
- TP-Link
- WR2543
- Ubiquiti
- Rocket
- WD
- MyNet N600
- MyNet N750
- ZyXEL
- NB6616
- NB6716
Features
--------
WireGuard
~~~~~~~~~
Gluon got WireGuard support. This allows offloading **encrypted**
connections into kernel space, increasing performance by forwarding
packets without the need for context switches between user and kernel
space.
In order to reuse existing (already verified) fastd-keypairs for
WireGuard, a key derivation procedure is `currently being
developed <https://github.com/freifunk-gluon/gluon/pull/2601>`__. This
should ease migration from fastd to WireGuard in case whitelisting VPN
keys is desired.
fastd L2TP
~~~~~~~~~~
fastd can now act as a connection broker for unencrypted L2TP-based
tunneling within Gluons mesh-vpn framework. This new ``null@l2tp``
connection method allows for increased performance within existing
fastd setups.
In addition to a sufficiently
:ref:`configured fastd-based VPN server<vpn-gateway-configuration>`,
this requires further modifications to a sites :ref:`VPN fastd methods<VPN fastd methods>`.
Major changes
-------------
OpenWrt
~~~~~~~
This release is based on the newest OpenWrt 22.03 release branch.
It ships with Linux kernel 5.10 as well as wireless-backports 5.15.
Network changes (DSA / Upgrade-Behavior)
~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
The ``ramips-mt7621`` and ``lantiq-xrx200`` targets now use the upstream DSA
subsystem instead of OpenWrt swconfig for managing ethernet switches.
Gluon detects the existing user-intent and automatically applies it over
to DSA syntax. See the section about network reconfiguration for more
details.
System reconfiguration
~~~~~~~~~~~~~~~~~~~~~~
The network and system-LED configurations are now re-generated after
each update / invocation of ``gluon-reconfigure``.
The user-intent is preserved within Gluons implemented functionality
(Wired-Mesh / Client access / WAN).
As an additional feature, Gluon now supports assigning roles to
interfaces. This behavior is explained
:ref:`here<wired-mesh-commandline>`.
Site changes
------------
VPN provider MTU
~~~~~~~~~~~~~~~~
To account for multiple VPN methods available for a site, the MTU used
for the VPN tunnel connection is now moved to the specific VPN provider
configuration. For fastd this means that ``mesh_vpn.mtu`` needs to be
moved to ``mesh_vpn.fastd.mtu``. (`#2352 <https://github.com/freifunk-gluon/gluon/pull/2352>`__)
Preconfigured Interfaces Roles
~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
Instead of ``mesh_on_wan`` and ``mesh_on_lan`` there is now an
``interfaces`` block to configure the default behavior of network
interfaces. Details can be found in the
:ref:`documentation<user-site-interfaces>`.
Minor changes
-------------
- The ``brcm2708-bcm2708`` ``brcm2708-bcm2709`` ``brcm2708-bcm2710``
targets were renamed to ``bcm27xx-bcm2708`` ``bcm27xx-bcm2709`` and
``bcm27xx-bcm2710``
- The GL.iNet GL-AR750S was moved to the ``ath79-nand`` subtarget
- Gluon now ships the ath10k-ct firmware derivation for
QCA9886 / QCA9888 / QCA9896 / QCA9898 / QCA9984 /
QCA9994 / IPQ4018 / IPQ4028 / IPQ4019 / IPQ4029
radios (`#2541 <https://github.com/freifunk-gluon/gluon/pull/2541>`__)
- WolfSSL instead of OpenSSL is now used when built with WPA3 support
- The option to configure the wireless-channel independent from the
site-selected channel was moved from
``gluon-core.wireless.preserve_channels`` to
``gluon.wireless.preserve_channels``
- ``gluon-info`` is a new command that provides information about the
current node
- ``GLUON_DEPRECATED`` is now set to 0 by default
- To reboot a running gluon-node into setup-mode, Gluon now offers the
``gluon-enter-setup-mode`` command
- Devices without WLAN do not show the private-wifi configuration
anymore
- The Autoupdater now uses the site default branch in case it is
configured to use a non-existent / invalid branch
Known issues
------------
* A workaround for Android devices not waking up to their MLD subscriptions was removed,
potentially breaking IPv6 connectivity for these devices after extended sleep periods.
(`#2672 <https://github.com/freifunk-gluon/gluon/issues/2672>`_)
* Upgrading EdgeRouter-X from versions before v2020.1.x may lead to a soft-bricked state due to bad blocks on the NAND flash which the NAND driver before this release does not handle well.
(`#1937 <https://github.com/freifunk-gluon/gluon/issues/1937>`_)
* The integration of the BATMAN_V routing algorithm is incomplete.
- Mesh neighbors don't appear on the status page. (`#1726 <https://github.com/freifunk-gluon/gluon/issues/1726>`_)
Many tools have the BATMAN_IV metric hardcoded, these need to be updated to account for the new throughput
metric.
- Throughput values are not correctly acquired for different interface types.
(`#1728 <https://github.com/freifunk-gluon/gluon/issues/1728>`_)
This affects virtual interface types like bridges and VXLAN.
* Default TX power on many Ubiquiti devices is too high, correct offsets are unknown
(`#94 <https://github.com/freifunk-gluon/gluon/issues/94>`_)
Reducing the TX power in the Advanced Settings is recommended.
* In configurations without VXLAN, the MAC address of the WAN interface is modified even when Mesh-on-WAN is disabled
(`#496 <https://github.com/freifunk-gluon/gluon/issues/496>`_)
This may lead to issues in environments where a fixed MAC address is expected (like VMware when promiscuous mode is disallowed).