nils/gluon
1
0
Fork 0
Code Issues Pull Requests Packages Projects Releases Wiki Activity
1649635be4
gluon/targets/ar71xx-generic

294 lines
6.3 KiB
Plaintext
Raw Normal View History

ar71xx: build kernel modules used by Gluon into the kernel ar71xx-generic and -tiny benefit most from the optimized kernel, as they contain all devices with 32MB RAM. We enable CONFIG_GLUON_SPECIALIZE_KERNEL for all targets using the mips24_kc architecture so packages shared between targets don't need to be rebuild all the time.
2018-04-12 04:11:26 +00:00
config 'CONFIG_GLUON_SPECIALIZE_KERNEL=y'
targets: remove check if ATH10K_PACKAGES is set as GLUON_WLAN_MESH now is set by default, ATH10K_PACKAGES is set by default, too
2018-01-26 02:06:15 +00:00
ATH10K_PACKAGES='-kmod-ath10k kmod-ath10k-ct'
ar71xx: add TP-Link Archer C25 (#1238) BROKEN because of stability issues with 5GHz enabled.
2017-10-11 03:10:08 +00:00
ATH10K_PACKAGES_QCA9887=
build: introduce GLUON_WLAN_MESH build variable (#1298) defaults to 11s, allowing to build devices without IBSS-support obsoletes GLUON_ATH10K_MESH
2018-01-10 14:49:33 +00:00
if [ "$GLUON_WLAN_MESH" = 'ibss' ]; then
Use LEDE as base for Gluon
2017-01-18 16:21:43 +00:00
ATH10K_PACKAGES='-kmod-ath10k kmod-ath10k-ct -ath10k-firmware-qca988x ath10k-firmware-qca988x-ct'
ar71xx: add TP-Link Archer C25 (#1238) BROKEN because of stability issues with 5GHz enabled.
2017-10-11 03:10:08 +00:00
ATH10K_PACKAGES_QCA9887='-kmod-ath10k kmod-ath10k-ct -ath10k-firmware-qca9887 ath10k-firmware-qca9887-ct'
Use LEDE as base for Gluon
2017-01-18 16:21:43 +00:00
fi
# 8devices
device 8devices-carambola2-board carambola2
factory
# ALFA NETWORK
ar71xx: add support for Alfa AP121F (#1404) Adds support for Alfa AP121F USB powered travel router (looks like an USB ethernet adapter). There is no factory image, but only a sysupgrade file for this router which can be installed using the inbuilt UBoot web interface. Configure your PC with IP address 192.168.1.2 and connect the router using its RJ45 port. Hold the reset button while powering the device until all LEDs have flashed 3 times simultaneously. You can now access the fallback web interface using a web browser at http://192.168.1.1 and flash the sysupgrade file.
2018-05-23 17:32:40 +00:00
device alfa-network-ap121f ap121f ap121f
factory
Use LEDE as base for Gluon
2017-01-18 16:21:43 +00:00
device alfa-network-hornet-ub hornet-ub HORNETUB
alias alfa-network-ap121
alias alfa-network-ap121u
device alfa-network-tube2h tube2h-8M TUBE2H8M
device alfa-network-n2-n5 alfa-nx ALFANX
# Allnet
device allnet-all0315n all0315n ALL0315N
factory
ar71xx: add support for Fritz!Box 4020 This commit adds support for the AVM Fritz!Box 4020 WiFi-router. SoC: Qualcomm Atheros QCA9561 (Dragonfly) 750MHz RAM: Winbond W971GG6KB-25 FLASH: Macronix MX25L12835F WiFi: QCA9561 b/g/n 3x3 450Mbit/s USB: 1x USB 2.0 IN: WPS button, WiFi button OUT: Power LED green, Internet LED green, WLAN LED green, LAN LED green, INFO LED green, INFO LED red UART: Header Next to Black metal shield Pinout is 3.3V - RX - TX - GND (Square Pad is 3.3V) The Serial setting is 115200-8-N-1. Tested and working: - Ethernet (LAN + WAN) - WiFi (correct MAC) - Installation via EVA bootloader - OpenWRT sysupgrade - Buttons - LEDs Not working: - USB port Installation via EVA: In the first seconds after Power is connected, the bootloader will listen for FTP connections on 169.254.157.1 (Might also be 192.168.178.1). Firmware can be uploaded like following: ftp> quote USER adam2 ftp> quote PASS adam2 ftp> binary ftp> debug ftp> passive ftp> quote MEDIA FLSH ftp> put openwrt-sysupgrade.bin mtd1 Note that this procedure might take up to two minutes. After transfer is complete you need to powercycle the device to boot OpenWRT. Signed-off-by: David Bauer <mail@david-bauer.net>
2018-05-07 22:35:59 +00:00
# AVM
device avm-fritz-box-4020 fritz4020 fritz4020
factory
Use LEDE as base for Gluon
2017-01-18 16:21:43 +00:00
# Buffalo
device buffalo-wzr-hp-g300nh wzr-hp-g300nh WZRHPG300NH
device buffalo-wzr-hp-g300nh2 wzr-hp-g300nh2 WZRHPG300NH2
device buffalo-wzr-hp-g450h wzr-hp-g450h WZRHPG450H
device buffalo-wzr-hp-ag300h wzr-hp-ag300h WZRHPAG300H
sysupgrade
device buffalo-wzr-600dhp wzr-600dhp WZR600DHP
sysupgrade
sysupgrade_image buffalo-wzr-hp-ag300h-wzr-600dhp wzr-hp-ag300h-squashfs-sysupgrade .bin
# D-Link
device d-link-dir-505-rev-a1 dir-505-a1 DIR505A1
alias d-link-dir-505-rev-a2
device d-link-dir-825-rev-b1 dir-825-b1 DIR825B1
ar71xx-generic: don't try to build a factory image for D-Link DIR-825 B1 The size of the factory images is limited to 4MB, which caused build failures when many additional packages were included. Rather than moving the device to ar71xx-tiny, we ignore the factory images and just build the sysupgrade. This way, the whole flash is usable for Gluon. This means that installing Gluon on these devices will now require to flash a plain LEDE image first, and then upgrading using the Gluon sysupgrade image. Fixes #1020
2017-02-24 00:50:17 +00:00
factory
Use LEDE as base for Gluon
2017-01-18 16:21:43 +00:00
# GL Innovations
device gl-inet-6408a-v1 gl-inet-6408A-v1
device gl-inet-6416a-v1 gl-inet-6416A-v1
device gl-ar150 gl-ar150
factory
ar71xx-generic: add support for GL.INet GL-AR300M (#1163)
2017-06-27 00:31:39 +00:00
device gl-ar300m gl-ar300m
factory
Use LEDE as base for Gluon
2017-01-18 16:21:43 +00:00
ar71xx: add support for GL.iNet GL-AR750 (#1395)
2018-05-17 20:33:18 +00:00
device gl-ar750 gl-ar750
packages $ATH10K_PACKAGES
factory
Use LEDE as base for Gluon
2017-01-18 16:21:43 +00:00
# Linksys by Cisco
device linksys-wrt160nl wrt160nl WRT160NL
# Meraki
# BROKEN: MAC address uniqueness issues
if [ "$BROKEN" ]; then
device meraki-mr12 mr12
alias meraki-mr62
factory
device meraki-mr16 mr16
alias meraki-mr66
factory
fi
# Netgear
device netgear-wndr3700 wndr3700
factory .img
device netgear-wndr3700v2 wndr3700v2
factory .img
device netgear-wndr3800 wndr3800
factory .img
device netgear-wndrmacv2 wndrmacv2
factory .img
if [ "$BROKEN" ]; then
targets: update & cleanup reasons for BROKEN flags
2018-01-26 03:10:12 +00:00
device netgear-wndrmac wndrmac # BROKEN: Untested
Use LEDE as base for Gluon
2017-01-18 16:21:43 +00:00
factory .img
targets: update & cleanup reasons for BROKEN flags
2018-01-26 03:10:12 +00:00
device netgear-wnr2200 wnr2200 WNR2200 # BROKEN: Untested
Use LEDE as base for Gluon
2017-01-18 16:21:43 +00:00
factory .img
fi
# Onion
device onion-omega onion-omega
# OpenMesh
ar71xx: add support for OpenMesh A40/A60 (#1424)
2018-06-08 18:18:30 +00:00
device openmesh-a60 a60 A60
alias openmesh-a40
ar71xx: add ath10k packages for OpenMesh A40/A60 (#1444) The dependency line was lost during the rebase of the current master version. Fixes: 9d719a2e572c ("ar71xx: add support for OpenMesh A40/A60 (#1424)")
2018-06-24 11:32:56 +00:00
packages $ATH10K_PACKAGES
ar71xx: add support for OpenMesh A40/A60 (#1424)
2018-06-08 18:18:30 +00:00
Use LEDE as base for Gluon
2017-01-18 16:21:43 +00:00
device openmesh-mr1750 mr1750 MR1750
alias openmesh-mr1750v2
packages $ATH10K_PACKAGES
device openmesh-mr600 mr600 MR600
alias openmesh-mr600v2
device openmesh-mr900 mr900 MR900
alias openmesh-mr900v2
device openmesh-om2p om2p OM2P
alias openmesh-om2pv2
ar71xx: add support for OpenMesh OM2P(-HS)v4 (#1426)
2018-06-09 11:55:38 +00:00
alias openmesh-om2pv4
Use LEDE as base for Gluon
2017-01-18 16:21:43 +00:00
alias openmesh-om2p-hs
alias openmesh-om2p-hsv2
alias openmesh-om2p-hsv3
ar71xx: add support for OpenMesh OM2P(-HS)v4 (#1426)
2018-06-09 11:55:38 +00:00
alias openmesh-om2p-hsv4
Use LEDE as base for Gluon
2017-01-18 16:21:43 +00:00
alias openmesh-om2p-lc
device openmesh-om5p om5p OM5P
alias openmesh-om5p-an
device openmesh-om5p-ac om5pac OM5PAC
alias openmesh-om5p-acv2
packages $ATH10K_PACKAGES
# TP-Link
device tp-link-cpe210-v1.0 cpe210-220
alias tp-link-cpe210-v1.1
alias tp-link-cpe220-v1.1
device tp-link-cpe510-v1.0 cpe510-520
alias tp-link-cpe510-v1.1
alias tp-link-cpe520-v1.1
device tp-link-wbs210-v1.20 wbs210
device tp-link-wbs510-v1.20 wbs510
device tp-link-tl-wr710n-v1 tl-wr710n-v1
device tp-link-tl-wr710n-v2.1 tl-wr710n-v2.1
ar71xx-generic: add support for TP-Link TL-WR810N marked as BROKEN for now as it is untested
2018-01-19 22:46:32 +00:00
if [ "$BROKEN" ]; then
modules: update LEDE b1205a9211 ar71xx: /lib/ar71xx.sh: add model detection for TP-Link TL-WR810N fbeae9d891 iptables: make kmod-ipt-debug part of default ALL build 6ea9a702c5 iptables: Fix target TRACE issue 00fa1e4108 curl: fix libcurl/mbedtls async interface d5278cc48b kernel: bump 4.4 to 4.4.112 for 17.01 2ae0741f3b dnsmasq: backport validation fix in dnssec security fix 58d60bd283 dnsmasq: backport dnssec security fix for 17.01 d626aa005b mountd: bump to git HEAD version f0336975be kernel: bump 4.4 to 4.4.111 for 17.01 fb6f21c657 kmod-sched-cake: bump to latest cake bake for 17.01 2e8a3bb35f ar71xx: Netgear WNR2000v4: do not include USB packages [17.01] 3fa86282fa build: fix restoring /etc/opkg with PER_DEVICE_ROOTFS 987a7e3175 ramips: fix lenovo newifi-y1 switch and LED config dbb5ffaed5 ramips: firewrt: indicate boot status via LED
2018-02-03 13:16:45 +00:00
device tp-link-tl-wr810n-v1 tl-wr810n # BROKEN: Untested
ar71xx-generic: add support for TP-Link TL-WR810N marked as BROKEN for now as it is untested
2018-01-19 22:46:32 +00:00
fi
Use LEDE as base for Gluon
2017-01-18 16:21:43 +00:00
device tp-link-tl-wr842n-nd-v1 tl-wr842n-v1
device tp-link-tl-wr842n-nd-v2 tl-wr842n-v2
device tp-link-tl-wr842n-nd-v3 tl-wr842n-v3
device tp-link-tl-wr1043n-nd-v1 tl-wr1043nd-v1
device tp-link-tl-wr1043n-nd-v2 tl-wr1043nd-v2
device tp-link-tl-wr1043n-nd-v3 tl-wr1043nd-v3
device tp-link-tl-wr1043n-nd-v4 tl-wr1043nd-v4
ar71xx: correct model name for TL-WR1043N v5, fixes #1307
2018-01-16 17:30:37 +00:00
device tp-link-tl-wr1043n-v5 tl-wr1043n-v5
Use LEDE as base for Gluon
2017-01-18 16:21:43 +00:00
device tp-link-tl-wdr3500-v1 tl-wdr3500-v1
device tp-link-tl-wdr3600-v1 tl-wdr3600-v1
device tp-link-tl-wdr4300-v1 tl-wdr4300-v1
device tp-link-tl-wr2543n-nd-v1 tl-wr2543-v1
device tp-link-archer-c5-v1 archer-c5-v1
packages $ATH10K_PACKAGES
device tp-link-archer-c7-v2 archer-c7-v2
packages $ATH10K_PACKAGES
factory -squashfs-factory${GLUON_REGION:+-${GLUON_REGION}} .bin
ar71xx-generic: add Support for TP Link RE450 (#1092) Fixes #1084 Hardware is very similar to Archer C5v1 and C7v2. Tested factory install and autoupdater. IBSS Mesh on 2.4 and 5 GHz is working fine. The only Ethernet Port is used for config mode and afterwards handled as WAN Port.
2017-04-13 00:01:19 +00:00
ar71xx: add support for TP-Link Archer C7 v4 (#1289)
2018-01-03 15:50:23 +00:00
device tp-link-archer-c7-v4 archer-c7-v4
packages $ATH10K_PACKAGES
ar71xx: add TP-Link Archer C25 (#1238) BROKEN because of stability issues with 5GHz enabled.
2017-10-11 03:10:08 +00:00
if [ "$BROKEN" ]; then
targets: update & cleanup reasons for BROKEN flags
2018-01-26 03:10:12 +00:00
device tp-link-archer-c25-v1 archer-c25-v1 # BROKEN: OOM with 5GHz enabled in most environments
ar71xx: add TP-Link Archer C25 (#1238) BROKEN because of stability issues with 5GHz enabled.
2017-10-11 03:10:08 +00:00
packages $ATH10K_PACKAGES_QCA9887
fi
ar71xx: add support for TP-Link Archer C58/C59/C60 (#1281)
2018-01-16 17:51:12 +00:00
if [ "$BROKEN" ]; then
targets: update & cleanup reasons for BROKEN flags
2018-01-26 03:10:12 +00:00
device tp-link-archer-c58-v1 archer-c58-v1 # BROKEN: OOM with 5GHz enabled in most environments
ar71xx: add support for TP-Link Archer C58/C59/C60 (#1281)
2018-01-16 17:51:12 +00:00
fi
if [ "$BROKEN" ] || [ "$GLUON_WLAN_MESH" = '11s' ]; then
targets: update & cleanup reasons for BROKEN flags
2018-01-26 03:10:12 +00:00
device tp-link-archer-c59-v1 archer-c59-v1 # BROKEN: IBSS meshing not working
ar71xx: add support for TP-Link Archer C58/C59/C60 (#1281)
2018-01-16 17:51:12 +00:00
fi
if [ "$BROKEN" ]; then
targets: update & cleanup reasons for BROKEN flags
2018-01-26 03:10:12 +00:00
device tp-link-archer-c60-v1 archer-c60-v1 # BROKEN: OOM with 5GHz enabled in most environments
ar71xx: add support for TP-Link Archer C58/C59/C60 (#1281)
2018-01-16 17:51:12 +00:00
fi
ar71xx-generic: add Support for TP Link RE450 (#1092) Fixes #1084 Hardware is very similar to Archer C5v1 and C7v2. Tested factory install and autoupdater. IBSS Mesh on 2.4 and 5 GHz is working fine. The only Ethernet Port is used for config mode and afterwards handled as WAN Port.
2017-04-13 00:01:19 +00:00
device tp-link-re450 re450
packages $ATH10K_PACKAGES
Use LEDE as base for Gluon
2017-01-18 16:21:43 +00:00
# Ubiquiti
device ubiquiti-airgateway ubnt-air-gateway
ar71xx-generic: add profile for UBNT Airgateway Pro and alias for UBNT Airgateway LR (#1107) The Airgateway LR is the same device as the normal Airgateway but with an detachable antenna. The Pro version is a cheap dual band device.
2017-04-27 02:15:13 +00:00
alias ubiquiti-airgateway-lr
device ubiquiti-airgateway-pro ubnt-air-gateway-pro
Use LEDE as base for Gluon
2017-01-18 16:21:43 +00:00
device ubiquiti-airrouter ubnt-airrouter
device ubiquiti-bullet-m ubnt-bullet-m
alias ubiquiti-nanostation-loco-m2
alias ubiquiti-nanostation-loco-m5
alias ubiquiti-bullet-m2
alias ubiquiti-bullet-m5
alias ubiquiti-picostation-m2
ar71xx-generic: make ubiquiti-rocket-m a separate device Make ubiquiti-rocket-m a separate device rather than a bullet-m alias to enable USB support and allow adding devive-specific packages.
2018-05-08 16:39:18 +00:00
device ubiquiti-rocket-m ubnt-rocket-m
alias ubiquiti-rocket-m2
alias ubiquiti-rocket-m5
Use LEDE as base for Gluon
2017-01-18 16:21:43 +00:00
device ubiquiti-nanostation-m ubnt-nano-m
alias ubiquiti-nanostation-m2
alias ubiquiti-nanostation-m5
device ubiquiti-loco-m-xw ubnt-loco-m-xw
alias ubiquiti-nanostation-loco-m2-xw
alias ubiquiti-nanostation-loco-m5-xw
ar71xx-generic: add support for Ubiquiti NanoBeam M5 marked as BROKEN for now as it is untested related issue: #1099
2018-01-20 14:38:49 +00:00
if [ "$BROKEN" ]; then
targets: update & cleanup reasons for BROKEN flags
2018-01-26 03:10:12 +00:00
alias ubiquiti-nanobeam-m5 # BROKEN: Untested
ar71xx-generic: add support for Ubiquiti NanoBeam M5 marked as BROKEN for now as it is untested related issue: #1099
2018-01-20 14:38:49 +00:00
fi
Use LEDE as base for Gluon
2017-01-18 16:21:43 +00:00
device ubiquiti-nanostation-m-xw ubnt-nano-m-xw
alias ubiquiti-nanostation-m2-xw
alias ubiquiti-nanostation-m5-xw
device ubiquiti-rocket-m-xw ubnt-rocket-m-xw
alias ubiquiti-rocket-m2-xw
alias ubiquiti-rocket-m5-xw
ar71xx-generic: add support for Ubiquiti Rocket M Titanium (#968)
2017-03-01 12:21:28 +00:00
device ubiquiti-rocket-m-ti ubnt-rocket-m-ti
alias ubiquiti-rocket-m2-ti
alias ubiquiti-rocket-m5-ti
Use LEDE as base for Gluon
2017-01-18 16:21:43 +00:00
device ubiquiti-unifi ubnt-unifi
alias ubiquiti-unifi-ap
alias ubiquiti-unifi-ap-lr
device ubiquiti-unifi-ap-pro ubnt-uap-pro
device ubiquiti-unifiap-outdoor ubnt-unifi-outdoor
device ubiquiti-unifiap-outdoor+ ubnt-unifi-outdoor-plus
if [ "$BROKEN" ]; then
device ubiquiti-ls-sr71 ubnt-ls-sr71 # BROKEN: Untested
fi
device ubiquiti-unifi-ac-lite ubnt-unifiac-lite
ar71xx-generic: add alias for Ubiquiti UniFi Mesh Fixes #1021
2017-08-08 10:08:09 +00:00
alias ubiquiti-unifi-ac-mesh
ar71xx-generic: set unifi-ac-lr alias on ac-lite
2018-02-19 04:04:22 +00:00
alias ubiquiti-unifi-ac-lr
Use LEDE as base for Gluon
2017-01-18 16:21:43 +00:00
packages $ATH10K_PACKAGES
factory
device ubiquiti-unifi-ac-pro ubnt-unifiac-pro
packages $ATH10K_PACKAGES
factory
# Western Digital
device wd-my-net-n600 mynet-n600
device wd-my-net-n750 mynet-n750
Reference in New Issue Copy Permalink