272 lines
6.9 KiB
Diff
272 lines
6.9 KiB
Diff
|
From: Ludwig Thomeczek <ledesrc@wxorx.net>
|
||
|
Date: Tue, 12 Jun 2018 21:17:23 +0200
|
||
|
Subject: ramips: add support for Netgear R6120
|
||
|
|
||
|
This patch adds support for the Netgear R6120, aka Netgear AC1200.
|
||
|
|
||
|
Specification:
|
||
|
- SoC: MediaTek MT7628 (580 MHz)
|
||
|
- Flash: 16 MiB
|
||
|
- RAM: 64 MiB
|
||
|
- Wireless: 2.4Ghz(builtin) and 5Ghz (MT7612E)
|
||
|
- LAN speed: 10/100
|
||
|
- LAN ports: 4
|
||
|
- WAN speed: 10/100
|
||
|
- WAN ports: 1
|
||
|
- Serial baud rate of Bootloader and factory firmware: 57600
|
||
|
|
||
|
To flash use nmrpflash with the provided factory.img.
|
||
|
Flashing via webinterface will not work, for now.
|
||
|
|
||
|
Signed-off-by: Ludwig Thomeczek <ledesrc@wxorx.net>
|
||
|
|
||
|
diff --git a/target/linux/ramips/base-files/etc/board.d/01_leds b/target/linux/ramips/base-files/etc/board.d/01_leds
|
||
|
index 19386b9e139a25fd1ac29cd9a66b738b5b092cdf..4203773b4fa3ec771f07b7a8c414a416a0da0f20 100755
|
||
|
--- a/target/linux/ramips/base-files/etc/board.d/01_leds
|
||
|
+++ b/target/linux/ramips/base-files/etc/board.d/01_leds
|
||
|
@@ -301,6 +301,11 @@ mzk-ex750np)
|
||
|
na930)
|
||
|
set_usb_led "$boardname:blue:status"
|
||
|
;;
|
||
|
+netgear,r6120)
|
||
|
+ ucidef_set_led_switch "lan" "lan" "$boardname:green:lan" "switch0" "0x0f"
|
||
|
+ ucidef_set_led_switch "wan" "wan" "$boardname:green:wan" "switch0" "0x10"
|
||
|
+ ucidef_set_led_wlan "wlan2g" "WiFi 2.4GHz" "$boardname:green:wlan2g" "phy0tpt"
|
||
|
+ ;;
|
||
|
newifi-d1)
|
||
|
set_usb_led "$boardname:red:status"
|
||
|
;;
|
||
|
diff --git a/target/linux/ramips/base-files/etc/board.d/02_network b/target/linux/ramips/base-files/etc/board.d/02_network
|
||
|
index 1c6cc6b0af745b43b81bbfffc9b5462c1b88defc..9424c7ddfd64f9149a24ff91e63b71990265d211 100755
|
||
|
--- a/target/linux/ramips/base-files/etc/board.d/02_network
|
||
|
+++ b/target/linux/ramips/base-files/etc/board.d/02_network
|
||
|
@@ -301,6 +301,10 @@ ramips_setup_interfaces()
|
||
|
"0:lan" "1:lan" "2:lan" "3:lan" "6t@eth0"
|
||
|
ucidef_set_interface_wan "usb0"
|
||
|
;;
|
||
|
+ netgear,r6120)
|
||
|
+ ucidef_add_switch "switch0" \
|
||
|
+ "0:lan:4" "1:lan:3" "2:lan:2" "3:lan:1" "4:wan" "6@eth0"
|
||
|
+ ;;
|
||
|
mzk-dp150n|\
|
||
|
vocore-8M|\
|
||
|
vocore-16M)
|
||
|
diff --git a/target/linux/ramips/base-files/etc/diag.sh b/target/linux/ramips/base-files/etc/diag.sh
|
||
|
index 6d021b6def2f1fe7b71a67f36749c440f3bad1d4..097cc6df569518f64dbfd641eeccc1a4b1b37a2b 100644
|
||
|
--- a/target/linux/ramips/base-files/etc/diag.sh
|
||
|
+++ b/target/linux/ramips/base-files/etc/diag.sh
|
||
|
@@ -38,6 +38,7 @@ get_status_led() {
|
||
|
mzk-w300nh2|\
|
||
|
nbg-419n|\
|
||
|
nbg-419n2|\
|
||
|
+ netgear,r6120|\
|
||
|
pwh2004|\
|
||
|
r6220|\
|
||
|
tplink,c20-v4|\
|
||
|
diff --git a/target/linux/ramips/base-files/lib/upgrade/platform.sh b/target/linux/ramips/base-files/lib/upgrade/platform.sh
|
||
|
index 8055853508fc850a1826166c7e0cbdf443df27cb..7213b22d0c2734488bd96bc34e921f08649b8c2f 100755
|
||
|
--- a/target/linux/ramips/base-files/lib/upgrade/platform.sh
|
||
|
+++ b/target/linux/ramips/base-files/lib/upgrade/platform.sh
|
||
|
@@ -129,6 +129,7 @@ platform_check_image() {
|
||
|
psr-680w|\
|
||
|
px-4885-4M|\
|
||
|
px-4885-8M|\
|
||
|
+ netgear,r6120|\
|
||
|
rb750gr3|\
|
||
|
re6500|\
|
||
|
rp-n53|\
|
||
|
diff --git a/target/linux/ramips/dts/R6120.dts b/target/linux/ramips/dts/R6120.dts
|
||
|
new file mode 100644
|
||
|
index 0000000000000000000000000000000000000000..a0df0072379a7d8f974ec8025483410d5f9f1da1
|
||
|
--- /dev/null
|
||
|
+++ b/target/linux/ramips/dts/R6120.dts
|
||
|
@@ -0,0 +1,142 @@
|
||
|
+/dts-v1/;
|
||
|
+
|
||
|
+#include "mt7628an.dtsi"
|
||
|
+
|
||
|
+#include <dt-bindings/gpio/gpio.h>
|
||
|
+#include <dt-bindings/input/input.h>
|
||
|
+
|
||
|
+/ {
|
||
|
+ compatible = "netgear,r6120", "mediatek,mt7628an-soc";
|
||
|
+ model = "Netgear R6120";
|
||
|
+
|
||
|
+ memory@0 {
|
||
|
+ device_type = "memory";
|
||
|
+ reg = <0x0 0x4000000>;
|
||
|
+ };
|
||
|
+
|
||
|
+ gpio-keys-polled {
|
||
|
+ compatible = "gpio-keys-polled";
|
||
|
+ poll-interval = <20>;
|
||
|
+
|
||
|
+ reset {
|
||
|
+ label = "reset";
|
||
|
+ gpios = <&gpio1 6 GPIO_ACTIVE_LOW>;
|
||
|
+ linux,code = <KEY_RESTART>;
|
||
|
+ };
|
||
|
+ };
|
||
|
+
|
||
|
+ gpio-leds {
|
||
|
+ compatible = "gpio-leds";
|
||
|
+
|
||
|
+ lan {
|
||
|
+ label = "r6120:green:lan";
|
||
|
+ gpios = <&gpio1 12 GPIO_ACTIVE_LOW>;
|
||
|
+ };
|
||
|
+
|
||
|
+ led_power: power {
|
||
|
+ label = "r6120:green:power";
|
||
|
+ gpios = <&gpio1 11 GPIO_ACTIVE_LOW>;
|
||
|
+ };
|
||
|
+
|
||
|
+ wlan {
|
||
|
+ label = "r6120:green:wlan2g";
|
||
|
+ gpios = <&gpio1 10 GPIO_ACTIVE_LOW>;
|
||
|
+ };
|
||
|
+
|
||
|
+ wlan_orange {
|
||
|
+ label = "r6120:orange:wlan2g";
|
||
|
+ gpios = <&gpio1 9 GPIO_ACTIVE_LOW>;
|
||
|
+ };
|
||
|
+
|
||
|
+ wan {
|
||
|
+ label = "r6120:green:wan";
|
||
|
+ gpios = <&gpio1 8 GPIO_ACTIVE_LOW>;
|
||
|
+ };
|
||
|
+
|
||
|
+ wan_orange {
|
||
|
+ label = "r6120:orange:wan";
|
||
|
+ gpios = <&gpio1 7 GPIO_ACTIVE_LOW>;
|
||
|
+ };
|
||
|
+ };
|
||
|
+};
|
||
|
+
|
||
|
+&pinctrl {
|
||
|
+ state_default: pinctrl0 {
|
||
|
+ gpio {
|
||
|
+ ralink,group = "p0led_an", "p1led_an", "p2led_an",
|
||
|
+ "p3led_an", "p4led_an", "wdt", "wled_an";
|
||
|
+ ralink,function = "gpio";
|
||
|
+ };
|
||
|
+ };
|
||
|
+};
|
||
|
+
|
||
|
+&spi0 {
|
||
|
+ status = "okay";
|
||
|
+
|
||
|
+ flash@0 {
|
||
|
+ compatible = "jedec,spi-nor";
|
||
|
+ reg = <0>;
|
||
|
+ spi-max-frequency = <10000000>;
|
||
|
+ m25p,chunked-io = <32>;
|
||
|
+
|
||
|
+ partitions {
|
||
|
+ compatible = "fixed-partitions";
|
||
|
+ #address-cells = <1>;
|
||
|
+ #size-cells = <1>;
|
||
|
+
|
||
|
+ partition@0 {
|
||
|
+ label = "u-boot";
|
||
|
+ reg = <0x0 0x40000>;
|
||
|
+ read-only;
|
||
|
+ };
|
||
|
+
|
||
|
+ factory: partition@40000 {
|
||
|
+ label = "factory";
|
||
|
+ reg = <0x40000 0x20000>;
|
||
|
+ read-only;
|
||
|
+ };
|
||
|
+
|
||
|
+ partition@60000 {
|
||
|
+ label = "nvram";
|
||
|
+ reg = <0x60000 0x30000>;
|
||
|
+ read-only;
|
||
|
+ };
|
||
|
+
|
||
|
+ partition@90000 {
|
||
|
+ label = "firmware";
|
||
|
+ reg = <0x90000 0xf60000>;
|
||
|
+ };
|
||
|
+
|
||
|
+ partition@ff0000 {
|
||
|
+ label = "reserved";
|
||
|
+ reg = <0xff0000 0x10000>;
|
||
|
+ read-only;
|
||
|
+ };
|
||
|
+ };
|
||
|
+ };
|
||
|
+};
|
||
|
+
|
||
|
+&wmac {
|
||
|
+ status = "okay";
|
||
|
+ mtd-mac-address = <&factory 0x4>;
|
||
|
+ mediatek,mtd-eeprom = <&factory 0x0>;
|
||
|
+};
|
||
|
+
|
||
|
+ðernet {
|
||
|
+ mtd-mac-address = <&factory 0x4>;
|
||
|
+};
|
||
|
+
|
||
|
+&pcie {
|
||
|
+ status = "okay";
|
||
|
+
|
||
|
+ pcie-bridge {
|
||
|
+ mt76@0,0 {
|
||
|
+ reg = <0x0000 0 0 0 0>;
|
||
|
+ device_type = "pci";
|
||
|
+ mediatek,mtd-eeprom = <&factory 0x8000>;
|
||
|
+ ieee80211-freq-limit = <5000000 6000000>;
|
||
|
+ mtd-mac-address = <&factory 0x4>;
|
||
|
+ mtd-mac-address-increment = <(2)>;
|
||
|
+ };
|
||
|
+ };
|
||
|
+};
|
||
|
diff --git a/target/linux/ramips/image/mt76x8.mk b/target/linux/ramips/image/mt76x8.mk
|
||
|
index 34bd662f3a9490bdb0fd125af5ffa8a0f77c5f16..bc282666d8c1a4b6ce5beabe2b492331fb48a23a 100644
|
||
|
--- a/target/linux/ramips/image/mt76x8.mk
|
||
|
+++ b/target/linux/ramips/image/mt76x8.mk
|
||
|
@@ -2,6 +2,17 @@
|
||
|
# MT76x8 Profiles
|
||
|
#
|
||
|
|
||
|
+DEVICE_VARS += SERCOMM_KERNEL_OFFSET SERCOMM_HWID SERCOMM_HWVER SERCOMM_SWVER
|
||
|
+
|
||
|
+define Build/mksercommfw
|
||
|
+ $(STAGING_DIR_HOST)/bin/mksercommfw \
|
||
|
+ $@ \
|
||
|
+ $(SERCOMM_KERNEL_OFFSET) \
|
||
|
+ $(SERCOMM_HWID) \
|
||
|
+ $(SERCOMM_HWVER) \
|
||
|
+ $(SERCOMM_SWVER)
|
||
|
+endef
|
||
|
+
|
||
|
define Device/tplink
|
||
|
TPLINK_FLASHLAYOUT :=
|
||
|
TPLINK_HWID :=
|
||
|
@@ -90,6 +101,23 @@ define Device/mt7628
|
||
|
endef
|
||
|
TARGET_DEVICES += mt7628
|
||
|
|
||
|
+define Device/netgear_r6120
|
||
|
+ DTS := R6120
|
||
|
+ BLOCKSIZE := 64k
|
||
|
+ IMAGE_SIZE := $(ralink_default_fw_size_16M)
|
||
|
+ DEVICE_TITLE := Netgear R6120
|
||
|
+ DEVICE_PACKAGES := kmod-usb2 kmod-usb-ohci
|
||
|
+ SERCOMM_KERNEL_OFFSET := 90000
|
||
|
+ SERCOMM_HWID := CGQ
|
||
|
+ SERCOMM_HWVER := A001
|
||
|
+ SERCOMM_SWVER := 0040
|
||
|
+ IMAGES += factory.img
|
||
|
+ IMAGE/default := append-kernel | pad-to $$$$(BLOCKSIZE)| append-rootfs | pad-rootfs
|
||
|
+ IMAGE/sysupgrade.bin := $$(IMAGE/default) | append-metadata | check-size $$$$(IMAGE_SIZE)
|
||
|
+ IMAGE/factory.img := $$(IMAGE/default) | mksercommfw
|
||
|
+endef
|
||
|
+TARGET_DEVICES += netgear_r6120
|
||
|
+
|
||
|
define Device/omega2
|
||
|
DTS := OMEGA2
|
||
|
IMAGE_SIZE := $(ralink_default_fw_size_16M)
|