nils/gluon
1
0
Fork 0
Code Issues Pull Requests Packages Projects Releases Wiki Activity
1f1ea9dc1f
gluon/patches/openwrt/0018-ar71xx-add-support-for-QCA953x-SoC.patch

734 lines
24 KiB
Diff
Raw Normal View History

Add support for the TP-LINK TL-WR841N/ND v9
2014-03-29 23:10:40 +00:00
From: Matthias Schiffer <mschiffer@universe-factory.net>
Date: Sat, 29 Mar 2014 21:55:41 +0100
Subject: ar71xx: add support for QCA953x SoC
diff --git a/target/linux/ar71xx/config-3.3 b/target/linux/ar71xx/config-3.3
index dfc5bf2..1c3ba3c 100644
--- a/target/linux/ar71xx/config-3.3
+++ b/target/linux/ar71xx/config-3.3
@@ -40,11 +40,11 @@ CONFIG_ATH79_MACH_EW_DORIN=y
CONFIG_ATH79_MACH_HORNET_UB=y
CONFIG_ATH79_MACH_JA76PF=y
CONFIG_ATH79_MACH_JWAP003=y
+CONFIG_ATH79_MACH_MR600=y
CONFIG_ATH79_MACH_MZK_W04NU=y
CONFIG_ATH79_MACH_MZK_W300NH=y
CONFIG_ATH79_MACH_NBG460N=y
CONFIG_ATH79_MACH_OM2P=y
-CONFIG_ATH79_MACH_MR600=y
CONFIG_ATH79_MACH_PB42=y
CONFIG_ATH79_MACH_PB44=y
CONFIG_ATH79_MACH_PB92=y
@@ -214,6 +214,7 @@ CONFIG_SOC_AR724X=y
CONFIG_SOC_AR913X=y
CONFIG_SOC_AR933X=y
CONFIG_SOC_AR934X=y
+CONFIG_SOC_QCA953X=y
CONFIG_SOC_QCA955X=y
CONFIG_SPI=y
CONFIG_SPI_AP83=y
diff --git a/target/linux/ar71xx/files/arch/mips/ath79/dev-eth.c b/target/linux/ar71xx/files/arch/mips/ath79/dev-eth.c
index 5a0b950..1a9b0df 100644
--- a/target/linux/ar71xx/files/arch/mips/ath79/dev-eth.c
+++ b/target/linux/ar71xx/files/arch/mips/ath79/dev-eth.c
@@ -195,6 +195,7 @@ void __init ath79_register_mdio(unsigned int id, u32 phy_mask)
case ATH79_SOC_AR7241:
case ATH79_SOC_AR9330:
case ATH79_SOC_AR9331:
+ case ATH79_SOC_QCA9533:
mdio_dev = &ath79_mdio1_device;
mdio_data = &ath79_mdio1_data;
break;
@@ -250,6 +251,11 @@ void __init ath79_register_mdio(unsigned int id, u32 phy_mask)
}
mdio_data->is_ar934x = 1;
break;
+
+ case ATH79_SOC_QCA9533:
+ mdio_data->builtin_switch = 1;
+ break;
+
case ATH79_SOC_QCA9558:
if (id == 1)
mdio_data->builtin_switch = 1;
@@ -540,6 +546,7 @@ static void __init ath79_init_eth_pll_data(unsigned int id)
case ATH79_SOC_AR9341:
case ATH79_SOC_AR9342:
case ATH79_SOC_AR9344:
+ case ATH79_SOC_QCA9533:
case ATH79_SOC_QCA9558:
pll_10 = AR934X_PLL_VAL_10;
pll_100 = AR934X_PLL_VAL_100;
@@ -596,6 +603,7 @@ static int __init ath79_setup_phy_if_mode(unsigned int id,
case ATH79_SOC_AR7241:
case ATH79_SOC_AR9330:
case ATH79_SOC_AR9331:
+ case ATH79_SOC_QCA9533:
pdata->phy_if_mode = PHY_INTERFACE_MODE_MII;
break;
@@ -645,6 +653,7 @@ static int __init ath79_setup_phy_if_mode(unsigned int id,
case ATH79_SOC_AR7241:
case ATH79_SOC_AR9330:
case ATH79_SOC_AR9331:
+ case ATH79_SOC_QCA9533:
pdata->phy_if_mode = PHY_INTERFACE_MODE_GMII;
break;
@@ -882,6 +891,37 @@ void __init ath79_register_eth(unsigned int id)
pdata->fifo_cfg3 = 0x01f00140;
break;
+ case ATH79_SOC_QCA9533:
+ if (id == 0) {
+ pdata->reset_bit = AR933X_RESET_GE0_MAC |
+ AR933X_RESET_GE0_MDIO;
+ pdata->set_speed = ath79_set_speed_dummy;
+
+ pdata->phy_mask = BIT(4);
+ } else {
+ pdata->reset_bit = AR933X_RESET_GE1_MAC |
+ AR933X_RESET_GE1_MDIO;
+ pdata->set_speed = ath79_set_speed_dummy;
+
+ pdata->speed = SPEED_1000;
+ pdata->duplex = DUPLEX_FULL;
+ pdata->switch_data = &ath79_switch_data;
+
+ ath79_switch_data.phy_poll_mask |= BIT(4);
+ }
+
+ pdata->ddr_flush = ath79_ddr_no_flush;
+ pdata->has_gbit = 1;
+ pdata->is_ar724x = 1;
+
+ if (!pdata->fifo_cfg1)
+ pdata->fifo_cfg1 = 0x0010ffff;
+ if (!pdata->fifo_cfg2)
+ pdata->fifo_cfg2 = 0x015500aa;
+ if (!pdata->fifo_cfg3)
+ pdata->fifo_cfg3 = 0x01f00140;
+ break;
+
case ATH79_SOC_AR9341:
case ATH79_SOC_AR9342:
case ATH79_SOC_AR9344:
@@ -953,6 +993,7 @@ void __init ath79_register_eth(unsigned int id)
case ATH79_SOC_AR7241:
case ATH79_SOC_AR9330:
case ATH79_SOC_AR9331:
+ case ATH79_SOC_QCA9533:
pdata->mii_bus_dev = &ath79_mdio1_device.dev;
break;
Update QCA953x support This should fix the TX power problems with the TL-WR841N/ND v9.
2014-05-05 01:59:21 +00:00
diff --git a/target/linux/ar71xx/patches-3.3/707-MIPS-ath79-add-support-for-QCA953x-SoC.patch b/target/linux/ar71xx/patches-3.3/707-MIPS-ath79-add-support-for-QCA953x-SoC.patch
Add support for the TP-LINK TL-WR841N/ND v9
2014-03-29 23:10:40 +00:00
new file mode 100644
Update QCA953x support This should fix the TX power problems with the TL-WR841N/ND v9.
2014-05-05 01:59:21 +00:00
index 0000000..063af94
Add support for the TP-LINK TL-WR841N/ND v9
2014-03-29 23:10:40 +00:00
--- /dev/null
Update QCA953x support This should fix the TX power problems with the TL-WR841N/ND v9.
2014-05-05 01:59:21 +00:00
+++ b/target/linux/ar71xx/patches-3.3/707-MIPS-ath79-add-support-for-QCA953x-SoC.patch
@@ -0,0 +1,604 @@
Add support for the TP-LINK TL-WR841N/ND v9
2014-03-29 23:10:40 +00:00
+From 5300a7cd7ed2f88488ddba62947b9c6bb9663777 Mon Sep 17 00:00:00 2001
+Message-Id: <5300a7cd7ed2f88488ddba62947b9c6bb9663777.1396122227.git.mschiffer@universe-factory.net>
+From: Matthias Schiffer <mschiffer@universe-factory.net>
+Date: Sat, 29 Mar 2014 20:26:08 +0100
+Subject: [PATCH 1/2] MIPS: ath79: add support for QCA953x SoC
+
+Note that the clock calculation looks very similar to the QCA955x, but actually
+some bits' meanings are slightly different.
+---
+ arch/mips/ath79/Kconfig | 6 +-
+ arch/mips/ath79/clock.c | 78 ++++++++++++++++++++++++++
+ arch/mips/ath79/common.c | 4 ++
+ arch/mips/ath79/dev-common.c | 1 +
+ arch/mips/ath79/dev-wmac.c | 20 +++++++
+ arch/mips/ath79/early_printk.c | 1 +
+ arch/mips/ath79/gpio.c | 4 +-
+ arch/mips/ath79/irq.c | 4 ++
+ arch/mips/ath79/setup.c | 8 ++-
+ arch/mips/include/asm/mach-ath79/ar71xx_regs.h | 48 ++++++++++++++++
+ arch/mips/include/asm/mach-ath79/ath79.h | 11 ++++
+ 11 files changed, 182 insertions(+), 3 deletions(-)
+
+--- a/arch/mips/ath79/Kconfig
++++ b/arch/mips/ath79/Kconfig
Update QCA953x support This should fix the TX power problems with the TL-WR841N/ND v9.
2014-05-05 01:59:21 +00:00
+@@ -688,6 +688,10 @@ config SOC_AR934X
Add support for the TP-LINK TL-WR841N/ND v9
2014-03-29 23:10:40 +00:00
+ select PCI_AR724X if PCI
+ def_bool n
+
++config SOC_QCA953X
++ select USB_ARCH_HAS_EHCI
++ def_bool n
++
+ config SOC_QCA955X
+ select USB_ARCH_HAS_EHCI
+ select HW_HAS_PCI
Update QCA953x support This should fix the TX power problems with the TL-WR841N/ND v9.
2014-05-05 01:59:21 +00:00
+@@ -731,7 +735,7 @@ config ATH79_DEV_USB
Add support for the TP-LINK TL-WR841N/ND v9
2014-03-29 23:10:40 +00:00
+ def_bool n
+
+ config ATH79_DEV_WMAC
+- depends on (SOC_AR913X || SOC_AR933X || SOC_AR934X || SOC_QCA955X)
++ depends on (SOC_AR913X || SOC_AR933X || SOC_AR934X || SOC_QCA953X || SOC_QCA955X)
+ def_bool n
+
+ config ATH79_NVRAM
+--- a/arch/mips/ath79/clock.c
++++ b/arch/mips/ath79/clock.c
+@@ -295,6 +295,82 @@ static void __init ar934x_clocks_init(vo
+ iounmap(dpll_base);
+ }
+
++static void __init qca953x_clocks_init(void)
++{
++ u32 pll, out_div, ref_div, nint, frac, clk_ctrl, postdiv;
++ u32 cpu_pll, ddr_pll;
++ u32 bootstrap;
++
++ bootstrap = ath79_reset_rr(QCA953X_RESET_REG_BOOTSTRAP);
++ if (bootstrap & QCA953X_BOOTSTRAP_REF_CLK_40)
++ ath79_ref_clk.rate = 40 * 1000 * 1000;
++ else
++ ath79_ref_clk.rate = 25 * 1000 * 1000;
++
++ pll = ath79_pll_rr(QCA953X_PLL_CPU_CONFIG_REG);
++ out_div = (pll >> QCA953X_PLL_CPU_CONFIG_OUTDIV_SHIFT) &
++ QCA953X_PLL_CPU_CONFIG_OUTDIV_MASK;
++ ref_div = (pll >> QCA953X_PLL_CPU_CONFIG_REFDIV_SHIFT) &
++ QCA953X_PLL_CPU_CONFIG_REFDIV_MASK;
++ nint = (pll >> QCA953X_PLL_CPU_CONFIG_NINT_SHIFT) &
++ QCA953X_PLL_CPU_CONFIG_NINT_MASK;
++ frac = (pll >> QCA953X_PLL_CPU_CONFIG_NFRAC_SHIFT) &
++ QCA953X_PLL_CPU_CONFIG_NFRAC_MASK;
++
++ cpu_pll = nint * ath79_ref_clk.rate / ref_div;
++ cpu_pll += frac * (ath79_ref_clk.rate >> 6) / ref_div;
++ cpu_pll /= (1 << out_div);
++
++ pll = ath79_pll_rr(QCA953X_PLL_DDR_CONFIG_REG);
++ out_div = (pll >> QCA953X_PLL_DDR_CONFIG_OUTDIV_SHIFT) &
++ QCA953X_PLL_DDR_CONFIG_OUTDIV_MASK;
++ ref_div = (pll >> QCA953X_PLL_DDR_CONFIG_REFDIV_SHIFT) &
++ QCA953X_PLL_DDR_CONFIG_REFDIV_MASK;
++ nint = (pll >> QCA953X_PLL_DDR_CONFIG_NINT_SHIFT) &
++ QCA953X_PLL_DDR_CONFIG_NINT_MASK;
++ frac = (pll >> QCA953X_PLL_DDR_CONFIG_NFRAC_SHIFT) &
++ QCA953X_PLL_DDR_CONFIG_NFRAC_MASK;
++
++ ddr_pll = nint * ath79_ref_clk.rate / ref_div;
++ ddr_pll += frac * (ath79_ref_clk.rate >> 6) / (ref_div << 4);
++ ddr_pll /= (1 << out_div);
++
++ clk_ctrl = ath79_pll_rr(QCA953X_PLL_CLK_CTRL_REG);
++
++ postdiv = (clk_ctrl >> QCA953X_PLL_CLK_CTRL_CPU_POST_DIV_SHIFT) &
++ QCA953X_PLL_CLK_CTRL_CPU_POST_DIV_MASK;
++
++ if (clk_ctrl & QCA953X_PLL_CLK_CTRL_CPU_PLL_BYPASS)
++ ath79_cpu_clk.rate = ath79_ref_clk.rate;
++ else if (clk_ctrl & QCA953X_PLL_CLK_CTRL_CPUCLK_FROM_CPUPLL)
++ ath79_cpu_clk.rate = cpu_pll / (postdiv + 1);
++ else
++ ath79_cpu_clk.rate = ddr_pll / (postdiv + 1);
++
++ postdiv = (clk_ctrl >> QCA953X_PLL_CLK_CTRL_DDR_POST_DIV_SHIFT) &
++ QCA953X_PLL_CLK_CTRL_DDR_POST_DIV_MASK;
++
++ if (clk_ctrl & QCA953X_PLL_CLK_CTRL_DDR_PLL_BYPASS)
++ ath79_ddr_clk.rate = ath79_ref_clk.rate;
++ else if (clk_ctrl & QCA953X_PLL_CLK_CTRL_DDRCLK_FROM_DDRPLL)
++ ath79_ddr_clk.rate = ddr_pll / (postdiv + 1);
++ else
++ ath79_ddr_clk.rate = cpu_pll / (postdiv + 1);
++
++ postdiv = (clk_ctrl >> QCA953X_PLL_CLK_CTRL_AHB_POST_DIV_SHIFT) &
++ QCA953X_PLL_CLK_CTRL_AHB_POST_DIV_MASK;
++
++ if (clk_ctrl & QCA953X_PLL_CLK_CTRL_AHB_PLL_BYPASS)
++ ath79_ahb_clk.rate = ath79_ref_clk.rate;
++ else if (clk_ctrl & QCA953X_PLL_CLK_CTRL_AHBCLK_FROM_DDRPLL)
++ ath79_ahb_clk.rate = ddr_pll / (postdiv + 1);
++ else
++ ath79_ahb_clk.rate = cpu_pll / (postdiv + 1);
++
++ ath79_wdt_clk.rate = ath79_ref_clk.rate;
++ ath79_uart_clk.rate = ath79_ref_clk.rate;
++}
++
+ static void __init qca955x_clocks_init(void)
+ {
+ u32 pll, out_div, ref_div, nint, frac, clk_ctrl, postdiv;
+@@ -383,6 +459,8 @@ void __init ath79_clocks_init(void)
+ ar933x_clocks_init();
+ else if (soc_is_ar934x())
+ ar934x_clocks_init();
++ else if (soc_is_qca953x())
++ qca953x_clocks_init();
+ else if (soc_is_qca955x())
+ qca955x_clocks_init();
+ else
+--- a/arch/mips/ath79/common.c
++++ b/arch/mips/ath79/common.c
+@@ -71,9 +71,12 @@ void ath79_device_reset_set(u32 mask)
+ reg = AR913X_RESET_REG_RESET_MODULE;
+ else if (soc_is_ar933x())
+ reg = AR933X_RESET_REG_RESET_MODULE;
+- else if (soc_is_ar934x() ||
+- soc_is_qca955x())
++ else if (soc_is_ar934x())
+ reg = AR934X_RESET_REG_RESET_MODULE;
++ else if (soc_is_qca953x())
++ reg = QCA953X_RESET_REG_RESET_MODULE;
++ else if (soc_is_qca955x())
++ reg = QCA955X_RESET_REG_RESET_MODULE;
+ else
+ BUG();
+
+@@ -98,9 +101,12 @@ void ath79_device_reset_clear(u32 mask)
+ reg = AR913X_RESET_REG_RESET_MODULE;
+ else if (soc_is_ar933x())
+ reg = AR933X_RESET_REG_RESET_MODULE;
+- else if (soc_is_ar934x() ||
+- soc_is_qca955x())
++ else if (soc_is_ar934x())
+ reg = AR934X_RESET_REG_RESET_MODULE;
++ else if (soc_is_qca953x())
++ reg = QCA953X_RESET_REG_RESET_MODULE;
++ else if (soc_is_qca955x())
++ reg = QCA955X_RESET_REG_RESET_MODULE;
+ else
+ BUG();
+
+--- a/arch/mips/ath79/dev-common.c
++++ b/arch/mips/ath79/dev-common.c
+@@ -100,6 +100,7 @@ void __init ath79_register_uart(void)
+ soc_is_ar724x() ||
+ soc_is_ar913x() ||
+ soc_is_ar934x() ||
++ soc_is_qca953x() ||
+ soc_is_qca955x()) {
+ ath79_uart_data[0].uartclk = clk_get_rate(clk);
+ platform_device_register(&ath79_uart_device);
+--- a/arch/mips/ath79/dev-wmac.c
++++ b/arch/mips/ath79/dev-wmac.c
Update QCA953x support This should fix the TX power problems with the TL-WR841N/ND v9.
2014-05-05 01:59:21 +00:00
+@@ -99,7 +99,7 @@ static int ar933x_wmac_reset(void)
+ return -ETIMEDOUT;
+ }
+
+-static int ar933x_r1_get_wmac_revision(void)
++static int ar93xx_get_soc_revision(void)
+ {
+ return ath79_soc_rev;
+ }
+@@ -124,7 +124,7 @@ static void __init ar933x_wmac_setup(voi
+ ath79_wmac_data.is_clk_25mhz = true;
+
+ if (ath79_soc_rev == 1)
+- ath79_wmac_data.get_mac_revision = ar933x_r1_get_wmac_revision;
++ ath79_wmac_data.get_mac_revision = ar93xx_get_soc_revision;
+
+ ath79_wmac_data.external_reset = ar933x_wmac_reset;
+ }
+@@ -147,6 +147,26 @@ static void ar934x_wmac_setup(void)
Add support for the TP-LINK TL-WR841N/ND v9
2014-03-29 23:10:40 +00:00
+ ath79_wmac_data.is_clk_25mhz = true;
+ }
+
++static void qca953x_wmac_setup(void)
++{
++ u32 t;
++
++ ath79_wmac_device.name = "qca953x_wmac";
++
++ ath79_wmac_resources[0].start = QCA953X_WMAC_BASE;
++ ath79_wmac_resources[0].end = QCA953X_WMAC_BASE + QCA953X_WMAC_SIZE - 1;
++ ath79_wmac_resources[1].start = ATH79_CPU_IRQ_IP2;
++ ath79_wmac_resources[1].end = ATH79_CPU_IRQ_IP2;
++
++ t = ath79_reset_rr(QCA953X_RESET_REG_BOOTSTRAP);
++ if (t & QCA953X_BOOTSTRAP_REF_CLK_40)
++ ath79_wmac_data.is_clk_25mhz = false;
++ else
++ ath79_wmac_data.is_clk_25mhz = true;
Update QCA953x support This should fix the TX power problems with the TL-WR841N/ND v9.
2014-05-05 01:59:21 +00:00
++
++ ath79_wmac_data.get_mac_revision = ar93xx_get_soc_revision;
Add support for the TP-LINK TL-WR841N/ND v9
2014-03-29 23:10:40 +00:00
++}
++
+ static void qca955x_wmac_setup(void)
+ {
+ u32 t;
Update QCA953x support This should fix the TX power problems with the TL-WR841N/ND v9.
2014-05-05 01:59:21 +00:00
+@@ -314,6 +334,8 @@ void __init ath79_register_wmac(u8 *cal_
Add support for the TP-LINK TL-WR841N/ND v9
2014-03-29 23:10:40 +00:00
+ ar933x_wmac_setup();
+ else if (soc_is_ar934x())
+ ar934x_wmac_setup();
++ else if (soc_is_qca953x())
++ qca953x_wmac_setup();
+ else if (soc_is_qca955x())
+ qca955x_wmac_setup();
+ else
+--- a/arch/mips/ath79/early_printk.c
++++ b/arch/mips/ath79/early_printk.c
+@@ -114,6 +114,7 @@ static void prom_putchar_init(void)
+ case REV_ID_MAJOR_AR9341:
+ case REV_ID_MAJOR_AR9342:
+ case REV_ID_MAJOR_AR9344:
++ case REV_ID_MAJOR_QCA9533:
+ case REV_ID_MAJOR_QCA9558:
+ _prom_putchar = prom_putchar_ar71xx;
+ break;
+--- a/arch/mips/ath79/gpio.c
++++ b/arch/mips/ath79/gpio.c
+@@ -232,14 +232,18 @@ void __init ath79_gpio_init(void)
+
+ if (soc_is_ar71xx())
+ ath79_gpio_count = AR71XX_GPIO_COUNT;
+- else if (soc_is_ar724x())
+- ath79_gpio_count = AR724X_GPIO_COUNT;
++ else if (soc_is_ar7240())
++ ath79_gpio_count = AR7240_GPIO_COUNT;
++ else if (soc_is_ar7241() || soc_is_ar7242())
++ ath79_gpio_count = AR7241_GPIO_COUNT;
+ else if (soc_is_ar913x())
+ ath79_gpio_count = AR913X_GPIO_COUNT;
+ else if (soc_is_ar933x())
+ ath79_gpio_count = AR933X_GPIO_COUNT;
+ else if (soc_is_ar934x())
+ ath79_gpio_count = AR934X_GPIO_COUNT;
++ else if (soc_is_qca953x())
++ ath79_gpio_count = QCA953X_GPIO_COUNT;
+ else if (soc_is_qca955x())
+ ath79_gpio_count = QCA955X_GPIO_COUNT;
+ else
+@@ -247,7 +251,7 @@ void __init ath79_gpio_init(void)
+
+ ath79_gpio_base = ioremap_nocache(AR71XX_GPIO_BASE, AR71XX_GPIO_SIZE);
+ ath79_gpio_chip.ngpio = ath79_gpio_count;
+- if (soc_is_ar934x() || soc_is_qca955x()) {
++ if (soc_is_ar934x() || soc_is_qca953x() || soc_is_qca955x()) {
+ ath79_gpio_chip.direction_input = ar934x_gpio_direction_input;
+ ath79_gpio_chip.direction_output = ar934x_gpio_direction_output;
+ }
+--- a/arch/mips/ath79/irq.c
++++ b/arch/mips/ath79/irq.c
+@@ -106,6 +106,7 @@ static void __init ath79_misc_irq_init(v
+ else if (soc_is_ar724x() ||
+ soc_is_ar933x() ||
+ soc_is_ar934x() ||
++ soc_is_qca953x() ||
+ soc_is_qca955x())
+ ath79_misc_irq_chip.irq_ack = ar724x_misc_irq_ack;
+ else
+@@ -352,6 +353,9 @@ void __init arch_init_irq(void)
+ } else if (soc_is_ar934x()) {
+ ath79_ip2_handler = ath79_default_ip2_handler;
+ ath79_ip3_handler = ar934x_ip3_handler;
++ } else if (soc_is_qca953x()) {
++ ath79_ip2_handler = ath79_default_ip2_handler;
++ ath79_ip3_handler = ath79_default_ip3_handler;
+ } else if (soc_is_qca955x()) {
+ ath79_ip2_handler = ath79_default_ip2_handler;
+ ath79_ip3_handler = ath79_default_ip3_handler;
+--- a/arch/mips/ath79/setup.c
++++ b/arch/mips/ath79/setup.c
+@@ -164,10 +164,16 @@ static void __init ath79_detect_sys_type
+ rev = id & AR934X_REV_ID_REVISION_MASK;
+ break;
+
++ case REV_ID_MAJOR_QCA9533:
++ ath79_soc = ATH79_SOC_QCA9533;
++ chip = "9533";
++ rev = id & QCA955X_REV_ID_REVISION_MASK;
++ break;
++
+ case REV_ID_MAJOR_QCA9558:
+ ath79_soc = ATH79_SOC_QCA9558;
+ chip = "9558";
+- rev = id & AR944X_REV_ID_REVISION_MASK;
++ rev = id & QCA955X_REV_ID_REVISION_MASK;
+ break;
+
+ default:
+@@ -176,7 +182,7 @@ static void __init ath79_detect_sys_type
+
+ ath79_soc_rev = rev;
+
+- if (soc_is_qca955x())
++ if (soc_is_qca953x() || soc_is_qca955x())
+ sprintf(ath79_sys_type, "Qualcomm Atheros QCA%s rev %u",
+ chip, rev);
+ else
+--- a/arch/mips/include/asm/mach-ath79/ar71xx_regs.h
++++ b/arch/mips/include/asm/mach-ath79/ar71xx_regs.h
+@@ -38,8 +38,8 @@
+ #define AR71XX_UART_SIZE 0x100
+ #define AR71XX_USB_CTRL_BASE (AR71XX_APB_BASE + 0x00030000)
+ #define AR71XX_USB_CTRL_SIZE 0x100
+-#define AR71XX_GPIO_BASE (AR71XX_APB_BASE + 0x00040000)
+-#define AR71XX_GPIO_SIZE 0x100
++#define AR71XX_GPIO_BASE (AR71XX_APB_BASE + 0x00040000)
++#define AR71XX_GPIO_SIZE 0x100
+ #define AR71XX_PLL_BASE (AR71XX_APB_BASE + 0x00050000)
+ #define AR71XX_PLL_SIZE 0x100
+ #define AR71XX_RESET_BASE (AR71XX_APB_BASE + 0x00060000)
+@@ -101,10 +101,13 @@
+ #define AR934X_WMAC_SIZE 0x20000
+ #define AR934X_EHCI_BASE 0x1b000000
+ #define AR934X_EHCI_SIZE 0x200
+-#define AR934X_SRIF_BASE (AR71XX_APB_BASE + 0x00116000)
+-#define AR934X_SRIF_SIZE 0x1000
+ #define AR934X_NFC_BASE 0x1b000200
+ #define AR934X_NFC_SIZE 0xb8
++#define AR934X_SRIF_BASE (AR71XX_APB_BASE + 0x00116000)
++#define AR934X_SRIF_SIZE 0x1000
++
++#define QCA953X_WMAC_BASE (AR71XX_APB_BASE + 0x00100000)
++#define QCA953X_WMAC_SIZE 0x20000
+
+ #define QCA955X_PCI_MEM_BASE0 0x10000000
+ #define QCA955X_PCI_MEM_BASE1 0x12000000
+@@ -119,14 +122,14 @@
+ #define QCA955X_PCI_CTRL_BASE1 (AR71XX_APB_BASE + 0x00280000)
+ #define QCA955X_PCI_CTRL_SIZE 0x100
+
++#define QCA955X_GMAC_BASE (AR71XX_APB_BASE + 0x00070000)
++#define QCA955X_GMAC_SIZE 0x40
+ #define QCA955X_WMAC_BASE (AR71XX_APB_BASE + 0x00100000)
+ #define QCA955X_WMAC_SIZE 0x20000
+ #define QCA955X_EHCI0_BASE 0x1b000000
+ #define QCA955X_EHCI1_BASE 0x1b400000
+-#define QCA955X_EHCI_SIZE 0x200
+-#define QCA955X_GMAC_BASE (AR71XX_APB_BASE + 0x00070000)
+-#define QCA955X_GMAC_SIZE 0x40
+-#define QCA955X_NFC_BASE 0x1b000200
++#define QCA955X_EHCI_SIZE 0x1000
++#define QCA955X_NFC_BASE 0x1b800200
+ #define QCA955X_NFC_SIZE 0xb8
+
+ #define AR9300_OTP_BASE 0x14000
+@@ -280,9 +283,48 @@
+
+ #define AR934X_PLL_SWITCH_CLOCK_CONTROL_MDIO_CLK_SEL BIT(6)
+
++#define QCA953X_PLL_CPU_CONFIG_REG 0x00
++#define QCA953X_PLL_DDR_CONFIG_REG 0x04
++#define QCA953X_PLL_CLK_CTRL_REG 0x08
++#define QCA953X_PLL_ETH_XMII_CONTROL_REG 0x2c
++#define QCA953X_PLL_ETH_SGMII_CONTROL_REG 0x48
++
++#define QCA953X_PLL_CPU_CONFIG_NFRAC_SHIFT 0
++#define QCA953X_PLL_CPU_CONFIG_NFRAC_MASK 0x3f
++#define QCA953X_PLL_CPU_CONFIG_NINT_SHIFT 6
++#define QCA953X_PLL_CPU_CONFIG_NINT_MASK 0x3f
++#define QCA953X_PLL_CPU_CONFIG_REFDIV_SHIFT 12
++#define QCA953X_PLL_CPU_CONFIG_REFDIV_MASK 0x1f
++#define QCA953X_PLL_CPU_CONFIG_OUTDIV_SHIFT 19
++#define QCA953X_PLL_CPU_CONFIG_OUTDIV_MASK 0x3
++
++#define QCA953X_PLL_DDR_CONFIG_NFRAC_SHIFT 0
++#define QCA953X_PLL_DDR_CONFIG_NFRAC_MASK 0x3ff
++#define QCA953X_PLL_DDR_CONFIG_NINT_SHIFT 10
++#define QCA953X_PLL_DDR_CONFIG_NINT_MASK 0x3f
++#define QCA953X_PLL_DDR_CONFIG_REFDIV_SHIFT 16
++#define QCA953X_PLL_DDR_CONFIG_REFDIV_MASK 0x1f
++#define QCA953X_PLL_DDR_CONFIG_OUTDIV_SHIFT 23
++#define QCA953X_PLL_DDR_CONFIG_OUTDIV_MASK 0x7
++
++#define QCA953X_PLL_CLK_CTRL_CPU_PLL_BYPASS BIT(2)
++#define QCA953X_PLL_CLK_CTRL_DDR_PLL_BYPASS BIT(3)
++#define QCA953X_PLL_CLK_CTRL_AHB_PLL_BYPASS BIT(4)
++#define QCA953X_PLL_CLK_CTRL_CPU_POST_DIV_SHIFT 5
++#define QCA953X_PLL_CLK_CTRL_CPU_POST_DIV_MASK 0x1f
++#define QCA953X_PLL_CLK_CTRL_DDR_POST_DIV_SHIFT 10
++#define QCA953X_PLL_CLK_CTRL_DDR_POST_DIV_MASK 0x1f
++#define QCA953X_PLL_CLK_CTRL_AHB_POST_DIV_SHIFT 15
++#define QCA953X_PLL_CLK_CTRL_AHB_POST_DIV_MASK 0x1f
++#define QCA953X_PLL_CLK_CTRL_CPUCLK_FROM_CPUPLL BIT(20)
++#define QCA953X_PLL_CLK_CTRL_DDRCLK_FROM_DDRPLL BIT(21)
++#define QCA953X_PLL_CLK_CTRL_AHBCLK_FROM_DDRPLL BIT(24)
++
+ #define QCA955X_PLL_CPU_CONFIG_REG 0x00
+ #define QCA955X_PLL_DDR_CONFIG_REG 0x04
+ #define QCA955X_PLL_CLK_CTRL_REG 0x08
++#define QCA955X_PLL_ETH_XMII_CONTROL_REG 0x28
++#define QCA955X_PLL_ETH_SGMII_CONTROL_REG 0x48
+
+ #define QCA955X_PLL_CPU_CONFIG_NFRAC_SHIFT 0
+ #define QCA955X_PLL_CPU_CONFIG_NFRAC_MASK 0x3f
+@@ -354,6 +396,11 @@
+ #define AR934X_RESET_REG_BOOTSTRAP 0xb0
+ #define AR934X_RESET_REG_PCIE_WMAC_INT_STATUS 0xac
+
++#define QCA953X_RESET_REG_RESET_MODULE 0x1c
++#define QCA953X_RESET_REG_BOOTSTRAP 0xb0
++#define QCA953X_RESET_REG_EXT_INT_STATUS 0xac
++
++#define QCA955X_RESET_REG_RESET_MODULE 0x1c
+ #define QCA955X_RESET_REG_BOOTSTRAP 0xb0
+ #define QCA955X_RESET_REG_EXT_INT_STATUS 0xac
+
+@@ -448,6 +495,39 @@
+ #define AR934X_RESET_MBOX BIT(1)
+ #define AR934X_RESET_I2S BIT(0)
+
++#define QCA955X_RESET_HOST BIT(31)
++#define QCA955X_RESET_SLIC BIT(30)
++#define QCA955X_RESET_HDMA BIT(29)
++#define QCA955X_RESET_EXTERNAL BIT(28)
++#define QCA955X_RESET_RTC BIT(27)
++#define QCA955X_RESET_PCIE_EP_INT BIT(26)
++#define QCA955X_RESET_CHKSUM_ACC BIT(25)
++#define QCA955X_RESET_FULL_CHIP BIT(24)
++#define QCA955X_RESET_GE1_MDIO BIT(23)
++#define QCA955X_RESET_GE0_MDIO BIT(22)
++#define QCA955X_RESET_CPU_NMI BIT(21)
++#define QCA955X_RESET_CPU_COLD BIT(20)
++#define QCA955X_RESET_HOST_RESET_INT BIT(19)
++#define QCA955X_RESET_PCIE_EP BIT(18)
++#define QCA955X_RESET_UART1 BIT(17)
++#define QCA955X_RESET_DDR BIT(16)
++#define QCA955X_RESET_USB_PHY_PLL_PWD_EXT BIT(15)
++#define QCA955X_RESET_NANDF BIT(14)
++#define QCA955X_RESET_GE1_MAC BIT(13)
++#define QCA955X_RESET_SGMII_ANALOG BIT(12)
++#define QCA955X_RESET_USB_PHY_ANALOG BIT(11)
++#define QCA955X_RESET_HOST_DMA_INT BIT(10)
++#define QCA955X_RESET_GE0_MAC BIT(9)
++#define QCA955X_RESET_SGMII BIT(8)
++#define QCA955X_RESET_PCIE_PHY BIT(7)
++#define QCA955X_RESET_PCIE BIT(6)
++#define QCA955X_RESET_USB_HOST BIT(5)
++#define QCA955X_RESET_USB_PHY BIT(4)
++#define QCA955X_RESET_USBSUS_OVERRIDE BIT(3)
++#define QCA955X_RESET_LUT BIT(2)
++#define QCA955X_RESET_MBOX BIT(1)
++#define QCA955X_RESET_I2S BIT(0)
++
+ #define AR933X_BOOTSTRAP_MDIO_GPIO_EN BIT(18)
+ #define AR933X_BOOTSTRAP_EEPBUSY BIT(4)
+ #define AR933X_BOOTSTRAP_REF_CLK_40 BIT(0)
+@@ -465,9 +545,11 @@
+ #define AR934X_BOOTSTRAP_EJTAG_MODE BIT(5)
+ #define AR934X_BOOTSTRAP_REF_CLK_40 BIT(4)
+ #define AR934X_BOOTSTRAP_BOOT_FROM_SPI BIT(2)
+-#define AR934X_BOOTSTRAP_SDRAM_DISABLED BIT(1)
++#define AR934X_BOOTSTRAP_SDRAM_DISABLED BIT(1)
+ #define AR934X_BOOTSTRAP_DDR1 BIT(0)
+
++#define QCA953X_BOOTSTRAP_REF_CLK_40 BIT(4)
++
+ #define QCA955X_BOOTSTRAP_REF_CLK_40 BIT(4)
+
+ #define AR934X_PCIE_WMAC_INT_WMAC_MISC BIT(0)
+@@ -530,6 +612,8 @@
+ #define REV_ID_MAJOR_AR9341 0x0120
+ #define REV_ID_MAJOR_AR9342 0x1120
+ #define REV_ID_MAJOR_AR9344 0x2120
++#define REV_ID_MAJOR_QCA9533 0x0140
++#define REV_ID_MAJOR_QCA9556 0x0130
+ #define REV_ID_MAJOR_QCA9558 0x1130
+
+ #define AR71XX_REV_ID_MINOR_MASK 0x3
+@@ -549,9 +633,9 @@
+
+ #define AR724X_REV_ID_REVISION_MASK 0x3
+
+-#define AR934X_REV_ID_REVISION_MASK 0xf
++#define AR934X_REV_ID_REVISION_MASK 0xf
+
+-#define AR944X_REV_ID_REVISION_MASK 0xf
++#define QCA955X_REV_ID_REVISION_MASK 0xf
+
+ /*
+ * SPI block
+@@ -599,10 +683,12 @@
+ #define AR934X_GPIO_REG_FUNC 0x6c
+
+ #define AR71XX_GPIO_COUNT 16
+-#define AR724X_GPIO_COUNT 18
++#define AR7240_GPIO_COUNT 18
++#define AR7241_GPIO_COUNT 20
+ #define AR913X_GPIO_COUNT 22
+ #define AR933X_GPIO_COUNT 30
+ #define AR934X_GPIO_COUNT 23
++#define QCA953X_GPIO_COUNT 24 /* (?) */
+ #define QCA955X_GPIO_COUNT 24
+
+ /*
+@@ -693,12 +779,14 @@
+ #define AR934X_GPIO_FUNC_CLK_OBS0_EN BIT(2)
+ #define AR934X_GPIO_FUNC_JTAG_DISABLE BIT(1)
+
+-#define AR934X_GPIO_OUT_GPIO 0
+-#define AR934X_GPIO_OUT_LED_LINK0 41
+-#define AR934X_GPIO_OUT_LED_LINK1 42
+-#define AR934X_GPIO_OUT_LED_LINK2 43
+-#define AR934X_GPIO_OUT_LED_LINK3 44
+-#define AR934X_GPIO_OUT_LED_LINK4 45
++#define AR934X_GPIO_OUT_GPIO 0
++#define AR934X_GPIO_OUT_LED_LINK0 41
++#define AR934X_GPIO_OUT_LED_LINK1 42
++#define AR934X_GPIO_OUT_LED_LINK2 43
++#define AR934X_GPIO_OUT_LED_LINK3 44
++#define AR934X_GPIO_OUT_LED_LINK4 45
++#define AR934X_GPIO_OUT_EXT_LNA0 46
++#define AR934X_GPIO_OUT_EXT_LNA1 47
+
+ /*
+ * MII_CTRL block
+@@ -756,6 +844,8 @@
+ #define AR933X_ETH_CFG_MII_CNTL_SPEED BIT(11)
+ #define AR934X_ETH_CFG_RMII_GMAC0_MASTER BIT(12)
+ #define AR933X_ETH_CFG_SW_ACC_MSB_FIRST BIT(13)
++#define AR934X_ETH_CFG_RXD_DELAY BIT(14)
++#define AR934X_ETH_CFG_RDV_DELAY BIT(16)
+
+ /*
+ * QCA955X GMAC Interface
+@@ -763,7 +853,7 @@
+
+ #define QCA955X_GMAC_REG_ETH_CFG 0x00
+
+-#define QCA955X_ETH_CFG_RGMII_GMAC0 BIT(0)
+-#define QCA955X_ETH_CFG_SGMII_GMAC0 BIT(6)
++#define QCA955X_ETH_CFG_RGMII_EN BIT(0)
++#define QCA955X_ETH_CFG_GE0_SGMII BIT(6)
+
+ #endif /* __ASM_MACH_AR71XX_REGS_H */
+--- a/arch/mips/include/asm/mach-ath79/ath79.h
++++ b/arch/mips/include/asm/mach-ath79/ath79.h
+@@ -32,6 +32,7 @@ enum ath79_soc_type {
+ ATH79_SOC_AR9341,
+ ATH79_SOC_AR9342,
+ ATH79_SOC_AR9344,
++ ATH79_SOC_QCA9533,
+ ATH79_SOC_QCA9558,
+ };
+
+@@ -99,6 +100,16 @@ static inline int soc_is_ar934x(void)
+ return soc_is_ar9341() || soc_is_ar9342() || soc_is_ar9344();
+ }
+
++static inline int soc_is_qca9533(void)
++{
++ return ath79_soc == ATH79_SOC_QCA9533;
++}
++
++static inline int soc_is_qca953x(void)
++{
++ return soc_is_qca9533();
++}
++
+ static inline int soc_is_qca9558(void)
+ {
+ return ath79_soc == ATH79_SOC_QCA9558;
+--- a/arch/mips/ath79/mach-ap136.c
++++ b/arch/mips/ath79/mach-ap136.c
+@@ -149,8 +149,8 @@ static void __init ap136_gmac_setup(void
+
+ t = __raw_readl(base + QCA955X_GMAC_REG_ETH_CFG);
+
+- t &= ~(QCA955X_ETH_CFG_RGMII_GMAC0 | QCA955X_ETH_CFG_SGMII_GMAC0);
+- t |= QCA955X_ETH_CFG_RGMII_GMAC0;
++ t &= ~(QCA955X_ETH_CFG_RGMII_EN | QCA955X_ETH_CFG_GE0_SGMII);
++ t |= QCA955X_ETH_CFG_RGMII_EN;
+
+ __raw_writel(t, base + QCA955X_GMAC_REG_ETH_CFG);
+
Reference in New Issue Copy Permalink