255 lines
8.7 KiB
Plaintext
255 lines
8.7 KiB
Plaintext
|
--[[ gluon site.conf example
|
||
|
|
|
||
|
|
This file is loosely related to the original site.conf used in Lübeck.
|
||
|
|
There are comments added to most switches to explain the usage of gluon.
|
||
|
|
|
||
|
|
This is lua code now, not perl anymore.
|
||
|
|
|
||
|
|
Happy compiling!
|
||
|
|
]]
|
||
|
|
|
||
|
|
{
|
||
|
|
--[[ Community settings
|
||
|
|
hostname_prefix: Nodename prefix
|
||
|
|
freifunk-abcdef123456 (hex-part is generated from node's MAC address)
|
||
|
|
site_name: Name of your community
|
||
|
|
site_code: Shortcode of your community
|
||
|
|
]]
|
||
|
|
hostname_prefix = 'freifunk',
|
||
|
|
site_name = 'Freifunk Lübeck',
|
||
|
|
site_code = 'ffhl',
|
||
|
|
|
||
|
|
|
||
|
|
--[[ General network settings
|
||
|
|
prefix4: IPv4 range of your community
|
||
|
|
prefix6: IPv6 range of your community
|
||
|
|
is also required for radvd
|
||
|
|
]]
|
||
|
|
prefix4 = '10.130.0.0/20',
|
||
|
|
prefix6 = 'fdef:ffc0:3dd7::/64',
|
||
|
|
|
||
|
|
|
||
|
|
--[[ NTP settings
|
||
|
|
Synchronize the time of the nodes
|
||
|
|
timezone: Timezone of your community
|
||
|
|
http://wiki.openwrt.org/doc/uci/system#time.zones
|
||
|
|
ntp_servers: List of NTP-Servers to query. You can use any public and/or your private NTP-Servers of your community.
|
||
|
|
http://www.pool.ntp.org/zone/de
|
||
|
|
]]
|
||
|
|
timezone = 'CET-1CEST,M3.5.0,M10.5.0/3',
|
||
|
|
ntp_servers = {'1.ntp.services.ffhl'},
|
||
|
|
|
||
|
|
|
||
|
|
--[[ Wireless settings
|
||
|
|
regdom: IEEE 802.11 Regulatory Domain
|
||
|
|
http://en.wikipedia.org/wiki/IEEE_802.11#Regulatory_domains_and_legal_compliance
|
||
|
|
wifi24: Wifi settings for 2.4 GHz frequency devices
|
||
|
|
wifi5: Wifi settings for 5 GHz frequency devices
|
||
|
|
sub
|
||
|
|
ssid: Wifi name shown to the user (We recommend %site_code%.freifunk.net)
|
||
|
|
channel: Wifi channel to use
|
||
|
|
htmode: Specifies the channel width in 802.11n and 802.11ac mode, possible values are:
|
||
|
|
HT20 (single 20MHz channel),
|
||
|
|
HT40- (2x 20MHz channels, primary/control channel is upper, secondary channel is below)
|
||
|
|
HT40+ (2x 20MHz channels, primary/control channel is lower, secondary channel is above).
|
||
|
|
VHT20 / VHT40 / VHT80 / VHT160 (channel width in 802.11ac, extra channels are picked according to the specification)
|
||
|
|
http://wiki.openwrt.org/doc/uci/wireless#common.options (-> htmode)
|
||
|
|
mesh_ssid: SSID of the mesh-interface, only used between nodes
|
||
|
|
mesh_bssid: BSSID of the mesh-interface
|
||
|
|
The supplied default of ff:ff:ff:ff:ff:ff will not work.
|
||
|
|
You'll need to replace it with randomly generated, non-broadcast BSSID!
|
||
|
|
mesh_mcast_rate: multicast rate of the mesh-interface
|
||
|
|
]]
|
||
|
|
regdom = 'DE',
|
||
|
|
|
||
|
|
wifi24 = {
|
||
|
|
ssid = 'luebeck.freifunk.net',
|
||
|
|
channel = 1,
|
||
|
|
htmode = 'HT40+',
|
||
|
|
mesh_ssid = 'ff:ff:ff:ff:ff:ff',
|
||
|
|
mesh_bssid = 'ff:ff:ff:ff:ff:ff',
|
||
|
|
mesh_mcast_rate = 12000,
|
||
|
|
},
|
||
|
|
|
||
|
|
wifi5 = {
|
||
|
|
ssid = 'luebeck.freifunk.net',
|
||
|
|
channel = 44,
|
||
|
|
htmode = 'HT40+',
|
||
|
|
mesh_ssid = 'ff:ff:ff:ff:ff:ff',
|
||
|
|
mesh_bssid = 'ff:ff:ff:ff:ff:ff',
|
||
|
|
mesh_mcast_rate = 12000,
|
||
|
|
},
|
||
|
|
|
||
|
|
|
||
|
|
--[[ Next-Node
|
||
|
|
next_node: Howto reach the node you are currently connected to
|
||
|
|
The node will always be reachable at that address, and it's the same on all nodes. Because next_node packets are redirected within the node itself, there will be no conflicts.
|
||
|
|
sub
|
||
|
|
ip4: IPv4 Address to use
|
||
|
|
ip6: IPv6 Address to use
|
||
|
|
mac: MAC Address to use
|
||
|
|
(TODO: What is the purpose of this MAC-Address here?)
|
||
|
|
]]
|
||
|
|
next_node = {
|
||
|
|
ip4 = '10.130.0.1',
|
||
|
|
ip6 = 'fdef:ffc0:3dd7::1',
|
||
|
|
mac = '16:41:95:40:f7:dc',
|
||
|
|
},
|
||
|
|
|
||
|
|
|
||
|
|
--[[ Gateway settings
|
||
|
|
fastd_mesh_vpn: fastd vpn settings
|
||
|
|
https://projects.universe-factory.net/projects/fastd/wiki/User_manual
|
||
|
|
sub
|
||
|
|
methods: encryption algorithms to use
|
||
|
|
https://projects.universe-factory.net/projects/fastd/wiki/Methods
|
||
|
|
When multiple method statements are given, the first one has the highest preference.
|
||
|
|
mtu: package size
|
||
|
|
backbone: fastd vpn gateways of your community
|
||
|
|
sub
|
||
|
|
limit: Number of gateways each node connects to
|
||
|
|
On startup, each node tries to connect to every gateway, and then chooses the number of 'limit' fastest gateways it could reach
|
||
|
|
peers: Gateways
|
||
|
|
sub sub
|
||
|
|
key: public fastd key of your gateway
|
||
|
|
https://github.com/tcatm/ecdsautils
|
||
|
|
remotes: List of fastd configuration strings to connect to your gateway server
|
||
|
|
]]
|
||
|
|
fastd_mesh_vpn = {
|
||
|
|
methods = {'salsa2012+gmac'},
|
||
|
|
mtu = 1426,
|
||
|
|
backbone = {
|
||
|
|
limit = 2,
|
||
|
|
peers = {
|
||
|
|
burgtor = {
|
||
|
|
key = '657af03e36ff1b8bbe5a5134982a4f110c8523a9a63293870caf548916a95a03',
|
||
|
|
remotes = {'ipv4 "burgtor.mesh.ffhl.chaotikum.org" port 10000'},
|
||
|
|
},
|
||
|
|
holstentor = {
|
||
|
|
key = '8c660f7511bf101ea1b599fe53af20e1146cd923c9e9d2a3a0d534ee75af9067',
|
||
|
|
remotes = {'ipv4 "holstentor.mesh.ffhl.chaotikum.org" port 10000'},
|
||
|
|
},
|
||
|
|
huextertor = {
|
||
|
|
key = 'a1b124f43eae4f5929850c09cda825ef35d659e3db4d7746e3d97627e9fa7238',
|
||
|
|
remotes = {'ipv4 "huextertor.mesh.ffhl.chaotikum.org" port 10000'},
|
||
|
|
},
|
||
|
|
muehlentor = {
|
||
|
|
key = 'bd4ec3cf87bb0042eed2fa121fbc402154d28fb1ae9dff9cdb71bb21892f401a',
|
||
|
|
remotes = {'ipv4 "muehlentor.mesh.ffhl.chaotikum.org" port 10000'},
|
||
|
|
},
|
||
|
|
},
|
||
|
|
},
|
||
|
|
},
|
||
|
|
|
||
|
|
|
||
|
|
--[[ Autoupdater settings
|
||
|
|
branch: Automatically update to this branch
|
||
|
|
branches: Available branches your community is publishing
|
||
|
|
sub sub
|
||
|
|
name: Name of branch (is used when compiling images)
|
||
|
|
mirrors: List of urls where to find the firmware
|
||
|
|
just serve the images on port 80 via http. a simple apache file-listing is enough.
|
||
|
|
see: http://luebeck.freifunk.net/firmware/
|
||
|
|
probability: How often should a node search for updates
|
||
|
|
1.0 - perform an update every hour
|
||
|
|
0.5 - on average, perform an update every two hours
|
||
|
|
0.0 - inhibit any automatic updates
|
||
|
|
good_signatures: How many signatures should be valid so the node decides to upgrade itself
|
||
|
|
pubkeys: public keys by developers used in manifest file of branch
|
||
|
|
manifest file - see gluon readme
|
||
|
|
$ make manifest GLUON_BRANCH=mybranch
|
||
|
|
$ contrib/sign.sh $SECRETKEY.file images/sysupgrade/manifest
|
||
|
|
]]
|
||
|
|
autoupdater = {
|
||
|
|
branch = 'experimental',
|
||
|
|
branches = {
|
||
|
|
stable = {
|
||
|
|
name = 'stable',
|
||
|
|
mirrors = {'http://1.updates.services.ffhl/stable/sysupgrade'},
|
||
|
|
probability = 0.08,
|
||
|
|
good_signatures = 2,
|
||
|
|
pubkeys = {
|
||
|
|
'daa19b44bbd7033965e02088127bad9516ba0fea8f34267a777144a23ec8900c', -- Linus
|
||
|
|
'a8dd60765b07330a4bbfdf8406102befca132881a4b65f3efda32cf2d5b362d9', -- Nils
|
||
|
|
'323bd3285c4e5547a89cd6da1f2aef67f1654b0928bbd5b104efc9dab2156d0b', -- NeoRaider
|
||
|
|
},
|
||
|
|
},
|
||
|
|
experimental = {
|
||
|
|
-- DE: Name des "braches" wird beim erstellen von Images / update generiert
|
||
|
|
name = 'experimental',
|
||
|
|
mirrors = {'http://1.updates.services.ffhl/experimental/sysupgrade'},
|
||
|
|
probability = 1.00,
|
||
|
|
good_signatures = 2,
|
||
|
|
good_signatures = 1,
|
||
|
|
-- DE: Oeffentlicher Schluessel / Public Key der Entwickler
|
||
|
|
pubkeys = {
|
||
|
|
'496136b37e5f561dfdf523611f14e4b6bc2a745cbc1ab7daffa59fded5f202d1', -- philae
|
||
|
|
},
|
||
|
|
},
|
||
|
|
},
|
||
|
|
},
|
||
|
|
|
||
|
|
|
||
|
|
--[[ Simple TC settings to limit the bandwidth of the vpn-uplink
|
||
|
|
mesh_vpn:
|
||
|
|
sub
|
||
|
|
ifname: name of the interface/bridge
|
||
|
|
enabled: default-value
|
||
|
|
limit_egress: default-value
|
||
|
|
limit_ingress: default-value
|
||
|
|
]]
|
||
|
|
simple_tc = {
|
||
|
|
mesh_vpn = {
|
||
|
|
ifname = 'mesh-vpn',
|
||
|
|
enabled = false,
|
||
|
|
limit_egress = 200,
|
||
|
|
limit_ingress = 3000,
|
||
|
|
},
|
||
|
|
},
|
||
|
|
|
||
|
|
|
||
|
|
--[[ Config Mode settings
|
||
|
|
Text shown on local website on node while in config mode (after initial flashing or after a long press and hold on the primary button and reboot). You can use html here.
|
||
|
|
msg_welcome: Welcome message shown at startup
|
||
|
|
msg_pubkey: Instructions for the user how your community handles the key exchange
|
||
|
|
only shown if VPN setting is selected
|
||
|
|
msg_reboot: Message shown when configuration is finished while the node is rebooting.
|
||
|
|
|
||
|
|
Variables
|
||
|
|
Within the text given here you can use variables which are
|
||
|
|
replaced when the respective website is delivered to the user.
|
||
|
|
Variables must be used in the format <%=NAME%>. See msg_pubkey for an example.
|
||
|
|
hostname hostname of the node
|
||
|
|
pubkey fastd public key of the node
|
||
|
|
sysconfig.primary_mac the primary mac of the node, also found printed beneath the device
|
||
|
|
... other sysconfig.* variables: config_ifname, lan_ifname, wan_ifname
|
||
|
|
]]
|
||
|
|
config_mode = {
|
||
|
|
msg_welcome = [[
|
||
|
|
Willkommen zum Einrichtungsassistenten für deinen neuen Lübecker
|
||
|
|
Freifunk-Knoten. Fülle das folgende Formular deinen Vorstellungen
|
||
|
|
entsprechend aus und sende es ab.
|
||
|
|
]],
|
||
|
|
msg_pubkey = [[
|
||
|
|
Dies ist der öffentliche Schlüssel deines Freifunk-Knotens. Erst nachdem
|
||
|
|
er auf den Servern des Lübecker Freifunk-Projektes eingetragen wurde,
|
||
|
|
kann sich dein Knoten mit dem Lübecker Mesh-VPN zu verbinden. Bitte
|
||
|
|
schicke dazu diesen Schlüssel und den Namen deines Knotens
|
||
|
|
(<em><%=hostname%></em>) an
|
||
|
|
<a href="mailto:keys@luebeck.freifunk.net">keys@luebeck.freifunk.net</a>.
|
||
|
|
]],
|
||
|
|
msg_reboot = [[
|
||
|
|
<p>
|
||
|
|
Dein Knoten startet gerade neu und wird anschließend versuchen,
|
||
|
|
sich anschließend mit anderen Freifunk-Knoten in seiner Nähe zu
|
||
|
|
verbinden. Weitere Informationen zur
|
||
|
|
Lübecker Freifunk-Community findest du auf
|
||
|
|
<a href="https://luebeck.freifunk.net/">unserer Webseite</a>.
|
||
|
|
</p>
|
||
|
|
<p>
|
||
|
|
Viel Spaß mit deinem Knoten und der Erkundung von Freifunk!
|
||
|
|
</p>
|
||
|
|
]],
|
||
|
|
},
|
||
|
|
}
|