nils/gluon
1
0
Fork 0
Code Issues Pull Requests Packages Projects Releases Wiki Activity
2fda1a1f86
gluon/patches/lede/0049-ar71xx-add-support-to-TP-Link-Archer-C59v1-and-C60v1.patch

758 lines
26 KiB
Diff
Raw Normal View History

ar71xx: add support for TP-Link Archer C58/C59/C60 (#1281)
2018-01-16 17:51:12 +00:00
From: Henryk Heisig <hyniu@o2.pl>
Date: Tue, 27 Dec 2016 22:41:41 +0100
Subject: ar71xx: add support to TP-Link Archer C59v1 and C60v1
TP-Link Archer C59v1 is a dual-band AC1350 router, based on Qualcomm/Atheros
QCA9561+QCA9886.
Specification:
- 775/650/258 MHz (CPU/DDR/AHB)
- 128 MB of RAM (DDR2)
- 16 MB of FLASH (SPI NOR)
- 3T3R 2.4 GHz
- 2T2R 5 GHz
- 5x 10/100 Mbps Ethernet
- USB 2.0 port
- 8x LED (controled by 74HC595), 3x button
- UART header on PCB
TP-Link Archer C60v1 is a dual-band AC1350 router, based on Qualcomm/Atheros
QCA9561+QCA9886.
Specification:
- 775/650/258 MHz (CPU/DDR/AHB)
- 64 MB of RAM (DDR2)
- 8 MB of FLASH (SPI NOR)
- 3T3R 2.4 GHz
- 2T2R 5 GHz
- 5x 10/100 Mbps Ethernet
- 7x LED, 2x button
- UART header on PCB
Currently not working:
- Port LAN1 on C59, LAN4 on C60
- WiFi 5GHz (missing ath10k firmware for QCA9886 chip)
- Update from oficial web interface ( tplink-saveloader not support "product-info")
Flash instruction:
1. Set PC to fixed ip address 192.168.0.66
2. Download lede-ar71xx-generic-archer-cXX-v1-squashfs-factory.bin
and rename it to tp_recovery.bin
3. Start a tftp server with the file tp_recovery.bin in its root directory
4. Turn off the router
5. Press and hold Reset button
6. Turn on router with the reset button pressed and wait ~15 seconds
7. Release the reset button and after a short time
the firmware should be transferred from the tftp server
8. Wait ~30 second to complete recovery.
Flash instruction under U-Boot, using UART:
1. tftp 0x81000000 lede-ar71xx-...-sysupgrade.bin
2. erase 0x9f020000 +$filesize
3. cp.b $fileaddr 0x9f020000 $filesize
4. reset
Signed-off-by: Henryk Heisig <hyniu@o2.pl>
[Jo-Philipp Wich: remove duplicate ATH79_MACH_ARCHER_C59/C60_V1 entries]
Signed-off-by: Jo-Philipp Wich <jo@mein.io>
diff --git a/target/linux/ar71xx/base-files/etc/board.d/01_leds b/target/linux/ar71xx/base-files/etc/board.d/01_leds
index 47b90d9cb2f81936aed22cdf7d1f6d870d23c16e..8552cde564b3fbed9425f42d5331f95fe5c3aaa8 100755
--- a/target/linux/ar71xx/base-files/etc/board.d/01_leds
+++ b/target/linux/ar71xx/base-files/etc/board.d/01_leds
@@ -62,6 +62,19 @@ archer-c25-v1)
ucidef_set_led_switch "lan3" "LAN3" "$board:green:lan3" "switch0" "0x04"
ucidef_set_led_switch "lan4" "LAN4" "$board:green:lan4" "switch0" "0x02"
;;
+archer-c59-v1|\
+archer-c60-v1)
+ ucidef_set_led_switch "lan" "LAN" "$board:green:lan" "switch0" "0x3C"
+ ucidef_set_led_switch "wan" "WAN" "$board:green:wan" "switch0" "0x02"
+ ucidef_set_led_wlan "wlan" "WLAN" "$board:green:wlan2g" "phy1tpt"
+ ucidef_set_led_wlan "wlan5g" "WLAN5G" "$board:green:wlan5g" "phy0tpt"
+
+ case "$board" in
+ archer-c59-v1)
+ ucidef_set_led_usbdev "usb" "USB" "$board:green:usb" "1-1"
+ ;;
+ esac
+ ;;
arduino-yun)
ucidef_set_led_wlan "wlan" "WLAN" "arduino:blue:wlan" "phy0tpt"
ucidef_set_led_usbdev "usb" "USB" "arduino:white:usb" "1-1.1"
diff --git a/target/linux/ar71xx/base-files/etc/board.d/02_network b/target/linux/ar71xx/base-files/etc/board.d/02_network
index 86ac949bca12561536ce2c8adb190eb004c162e4..3abe1114ee31c79abb125b85119876c3d75bb7c0 100755
--- a/target/linux/ar71xx/base-files/etc/board.d/02_network
+++ b/target/linux/ar71xx/base-files/etc/board.d/02_network
@@ -205,6 +205,11 @@ ar71xx_setup_interfaces()
ucidef_add_switch "switch0" \
"0@eth1" "2:lan" "3:lan" "4:lan" "5:lan" "6@eth0" "1:wan"
;;
+ archer-c59-v1|\
+ archer-c60-v1)
+ ucidef_add_switch "switch0" \
+ "0@eth0" "2:lan:4" "3:lan:3" "4:lan:2" "5:lan:1" "1:wan"
+ ;;
arduino-yun|\
dir-505-a1|\
tl-wa801nd-v3)
diff --git a/target/linux/ar71xx/base-files/etc/diag.sh b/target/linux/ar71xx/base-files/etc/diag.sh
index 97372bed0ea2fadfab10f22916a1e0d6a9c65725..3aa1f054d4f791545a8b6644f7bd24f64ed546a3 100644
--- a/target/linux/ar71xx/base-files/etc/diag.sh
+++ b/target/linux/ar71xx/base-files/etc/diag.sh
@@ -52,6 +52,8 @@ get_status_led() {
;;
archer-c25-v1|\
archer-c7-v4|\
+ archer-c59-v1|\
+ archer-c60-v1|\
mr12|\
mr16|\
nbg6616|\
diff --git a/target/linux/ar71xx/base-files/etc/hotplug.d/firmware/11-ath10k-caldata b/target/linux/ar71xx/base-files/etc/hotplug.d/firmware/11-ath10k-caldata
index 607bbd2c0ec4b59ba569550e9e0e87b80c7ddddb..5dd1d69e7e163c938759ce476846e4d985184b7b 100644
--- a/target/linux/ar71xx/base-files/etc/hotplug.d/firmware/11-ath10k-caldata
+++ b/target/linux/ar71xx/base-files/etc/hotplug.d/firmware/11-ath10k-caldata
@@ -97,6 +97,8 @@ case "$FIRMWARE" in
ath10kcal_patch_mac $(macaddr_add $(cat /sys/class/net/eth0/address) -2)
;;
archer-c25-v1|\
+ archer-c59-v1|\
+ archer-c60-v1|\
tl-wdr6500-v2)
ath10kcal_extract "art" 20480 2116
ath10kcal_patch_mac $(macaddr_add $(cat /sys/class/net/eth1/address) -2)
diff --git a/target/linux/ar71xx/base-files/lib/ar71xx.sh b/target/linux/ar71xx/base-files/lib/ar71xx.sh
lede: update patches
2018-02-03 13:22:48 +00:00
index c32894d95b6b09b4b8b59ba64057c23e71b9f656..d8e23d97e2cc20f8ba7b3b2fc516ce398c43a19b 100755
ar71xx: add support for TP-Link Archer C58/C59/C60 (#1281)
2018-01-16 17:51:12 +00:00
--- a/target/linux/ar71xx/base-files/lib/ar71xx.sh
+++ b/target/linux/ar71xx/base-files/lib/ar71xx.sh
lede: update patches
2018-02-03 13:22:48 +00:00
@@ -472,6 +472,12 @@ ar71xx_board_detect() {
ar71xx: add support for TP-Link Archer C58/C59/C60 (#1281)
2018-01-16 17:51:12 +00:00
*"Archer C7 v4")
name="archer-c7-v4"
;;
+ *"Archer C59 v1")
+ name="archer-c59-v1"
+ ;;
+ *"Archer C60 v1")
+ name="archer-c60-v1"
+ ;;
*"Archer C7")
name="archer-c7"
;;
diff --git a/target/linux/ar71xx/base-files/lib/upgrade/platform.sh b/target/linux/ar71xx/base-files/lib/upgrade/platform.sh
Update LEDE patches
2018-04-10 17:15:49 +00:00
index d6650e7719d268e1a500638b7eda2e15b9251aea..f4ac73e40e1acb800433a0b1348c8264a4639c30 100755
ar71xx: add support for TP-Link Archer C58/C59/C60 (#1281)
2018-01-16 17:51:12 +00:00
--- a/target/linux/ar71xx/base-files/lib/upgrade/platform.sh
+++ b/target/linux/ar71xx/base-files/lib/upgrade/platform.sh
Update LEDE patches
2018-04-10 17:15:49 +00:00
@@ -216,6 +216,8 @@ platform_check_image() {
ar71xx: add support for TP-Link Archer C58/C59/C60 (#1281)
2018-01-16 17:51:12 +00:00
ap90q|\
archer-c25-v1|\
archer-c7-v4|\
+ archer-c59-v1|\
+ archer-c60-v1|\
bullet-m|\
c-55|\
carambola2|\
diff --git a/target/linux/ar71xx/config-4.4 b/target/linux/ar71xx/config-4.4
index 57b6d2e541d7ef9dea8570ba8de72164d97b9775..5b33d48e52309b807dbdf2697524809ad08072ae 100644
--- a/target/linux/ar71xx/config-4.4
+++ b/target/linux/ar71xx/config-4.4
@@ -52,6 +52,8 @@ CONFIG_ATH79_MACH_AP152=y
CONFIG_ATH79_MACH_AP90Q=y
CONFIG_ATH79_MACH_AP96=y
CONFIG_ATH79_MACH_ARCHER_C25_V1=y
+CONFIG_ATH79_MACH_ARCHER_C59_V1=y
+CONFIG_ATH79_MACH_ARCHER_C60_V1=y
CONFIG_ATH79_MACH_ARCHER_C7=y
CONFIG_ATH79_MACH_ARDUINO_YUN=y
CONFIG_ATH79_MACH_AW_NR580=y
@@ -272,6 +274,7 @@ CONFIG_GENERIC_SMP_IDLE_THREAD=y
CONFIG_GENERIC_TIME_VSYSCALL=y
CONFIG_GPIOLIB=y
CONFIG_GPIOLIB_IRQCHIP=y
+CONFIG_GPIO_74X164=y
CONFIG_GPIO_DEVRES=y
CONFIG_GPIO_74X164=y
# CONFIG_GPIO_LATCH is not set
diff --git a/target/linux/ar71xx/files/arch/mips/ath79/Kconfig.openwrt b/target/linux/ar71xx/files/arch/mips/ath79/Kconfig.openwrt
index 0a25294c40b5e2d3be825554ec7246a50b9c029b..468d9b333e43814cbadec8d85a20ab94e5cd6d01 100644
--- a/target/linux/ar71xx/files/arch/mips/ath79/Kconfig.openwrt
+++ b/target/linux/ar71xx/files/arch/mips/ath79/Kconfig.openwrt
@@ -1244,6 +1244,27 @@ config ATH79_MACH_ARCHER_C25_V1
select ATH79_DEV_M25P80
select ATH79_DEV_WMAC
+config ATH79_MACH_ARCHER_C59_V1
+ bool "TP-LINK Archer C59 v1 support"
+ select SOC_QCA956X
+ select ATH79_DEV_AP9X_PCI if PCI
+ select ATH79_DEV_ETH
+ select ATH79_DEV_GPIO_BUTTONS
+ select ATH79_DEV_LEDS_GPIO
+ select ATH79_DEV_M25P80
+ select ATH79_DEV_USB
+ select ATH79_DEV_WMAC
+
+config ATH79_MACH_ARCHER_C60_V1
+ bool "TP-LINK Archer C60 v1 support"
+ select SOC_QCA956X
+ select ATH79_DEV_AP9X_PCI if PCI
+ select ATH79_DEV_ETH
+ select ATH79_DEV_GPIO_BUTTONS
+ select ATH79_DEV_LEDS_GPIO
+ select ATH79_DEV_M25P80
+ select ATH79_DEV_WMAC
+
config ATH79_MACH_ARCHER_C7
bool "TP-LINK Archer C5/C7/TL-WDR4900 v2 board support"
select SOC_QCA955X
diff --git a/target/linux/ar71xx/files/arch/mips/ath79/Makefile b/target/linux/ar71xx/files/arch/mips/ath79/Makefile
index a0c73550eb0d5bf07ee731171be9e5ef9ff073e7..fbe7fcb0aebb6577b96c27088a158eb025f201cb 100644
--- a/target/linux/ar71xx/files/arch/mips/ath79/Makefile
+++ b/target/linux/ar71xx/files/arch/mips/ath79/Makefile
@@ -57,6 +57,8 @@ obj-$(CONFIG_ATH79_MACH_AP152) += mach-ap152.o
obj-$(CONFIG_ATH79_MACH_AP90Q) += mach-ap90q.o
obj-$(CONFIG_ATH79_MACH_AP96) += mach-ap96.o
obj-$(CONFIG_ATH79_MACH_ARCHER_C25_V1) += mach-archer-c25-v1.o
+obj-$(CONFIG_ATH79_MACH_ARCHER_C59_V1) += mach-archer-c59-v1.o
+obj-$(CONFIG_ATH79_MACH_ARCHER_C60_V1) += mach-archer-c60-v1.o
obj-$(CONFIG_ATH79_MACH_ARCHER_C7) += mach-archer-c7.o
obj-$(CONFIG_ATH79_MACH_ARCHER_C7) += mach-archer-c7-v4.o
obj-$(CONFIG_ATH79_MACH_ARDUINO_YUN) += mach-arduino-yun.o
diff --git a/target/linux/ar71xx/files/arch/mips/ath79/mach-archer-c59-v1.c b/target/linux/ar71xx/files/arch/mips/ath79/mach-archer-c59-v1.c
new file mode 100644
index 0000000000000000000000000000000000000000..28353aa77b05078b895ab48cf6b1ae53abe98ce2
--- /dev/null
+++ b/target/linux/ar71xx/files/arch/mips/ath79/mach-archer-c59-v1.c
@@ -0,0 +1,223 @@
+/*
+ * TP-Link Archer C59 v1 board support
+ *
+ * Copyright (C) 2016 Henryk Heisig <hyniu@o2.pl>
+ *
+ * This program is free software; you can redistribute it and/or modify it
+ * under the terms of the GNU General Public License version 2 as published
+ * by the Free Software Foundation.
+ */
+#include <linux/platform_device.h>
+#include <linux/ath9k_platform.h>
+#include <linux/ar8216_platform.h>
+#include <asm/mach-ath79/ar71xx_regs.h>
+#include <linux/gpio.h>
+#include <linux/init.h>
+#include <linux/spi/spi_gpio.h>
+#include <linux/spi/74x164.h>
+
+#include "common.h"
+#include "dev-m25p80.h"
+#include "machtypes.h"
+#include "pci.h"
+#include "dev-ap9x-pci.h"
+#include "dev-eth.h"
+#include "dev-gpio-buttons.h"
+#include "dev-leds-gpio.h"
+#include "dev-spi.h"
+#include "dev-usb.h"
+#include "dev-wmac.h"
+
+#define ARCHER_C59_V1_KEYS_POLL_INTERVAL 20
+#define ARCHER_C59_V1_KEYS_DEBOUNCE_INTERVAL (3 * ARCHER_C59_V1_KEYS_POLL_INTERVAL)
+
+#define ARCHER_C59_V1_GPIO_BTN_RESET 21
+#define ARCHER_C59_V1_GPIO_BTN_RFKILL 2
+#define ARCHER_C59_V1_GPIO_BTN_WPS 1
+
+#define ARCHER_C59_V1_GPIO_USB_POWER 22
+
+#define ARCHER_C59_GPIO_SHIFT_OE 16
+#define ARCHER_C59_GPIO_SHIFT_SER 17
+#define ARCHER_C59_GPIO_SHIFT_SRCLK 18
+#define ARCHER_C59_GPIO_SHIFT_SRCLR 19
+#define ARCHER_C59_GPIO_SHIFT_RCLK 20
+
+#define ARCHER_C59_74HC_GPIO_BASE QCA956X_GPIO_COUNT
+#define ARCHER_C59_74HC_GPIO_LED_POWER 23
+#define ARCHER_C59_74HC_GPIO_LED_WLAN2 24
+#define ARCHER_C59_74HC_GPIO_LED_WLAN5 25
+#define ARCHER_C59_74HC_GPIO_LED_LAN 26
+#define ARCHER_C59_74HC_GPIO_LED_WAN_GREEN 27
+#define ARCHER_C59_74HC_GPIO_LED_WAN_AMBER 28
+#define ARCHER_C59_74HC_GPIO_LED_WPS 29
+#define ARCHER_C59_74HC_GPIO_LED_USB 30
+
+#define ARCHER_C59_V1_SSR_BIT_0 0
+#define ARCHER_C59_V1_SSR_BIT_1 1
+#define ARCHER_C59_V1_SSR_BIT_2 2
+#define ARCHER_C59_V1_SSR_BIT_3 3
+#define ARCHER_C59_V1_SSR_BIT_4 4
+#define ARCHER_C59_V1_SSR_BIT_5 5
+#define ARCHER_C59_V1_SSR_BIT_6 6
+#define ARCHER_C59_V1_SSR_BIT_7 7
+
+#define ARCHER_C59_V1_WMAC_CALDATA_OFFSET 0x1000
+#define ARCHER_C59_V1_PCI_CALDATA_OFFSET 0x5000
+
+static struct gpio_led archer_c59_v1_leds_gpio[] __initdata = {
+ {
+ .name = "archer-c59-v1:green:power",
+ .gpio = ARCHER_C59_74HC_GPIO_LED_POWER,
+ .active_low = 1,
+ },
+ {
+ .name = "archer-c59-v1:green:wlan2g",
+ .gpio = ARCHER_C59_74HC_GPIO_LED_WLAN2,
+ .active_low = 1,
+ },
+ {
+ .name = "archer-c59-v1:green:wlan5g",
+ .gpio = ARCHER_C59_74HC_GPIO_LED_WLAN5,
+ .active_low = 1,
+ },
+ {
+ .name = "archer-c59-v1:green:lan",
+ .gpio = ARCHER_C59_74HC_GPIO_LED_LAN,
+ .active_low = 1,
+ },
+ {
+ .name = "archer-c59-v1:green:wan",
+ .gpio = ARCHER_C59_74HC_GPIO_LED_WAN_GREEN,
+ .active_low = 1,
+ },
+ {
+ .name = "archer-c59-v1:amber:wan",
+ .gpio = ARCHER_C59_74HC_GPIO_LED_WAN_AMBER,
+ .active_low = 1,
+ },
+ {
+ .name = "archer-c59-v1:green:wps",
+ .gpio = ARCHER_C59_74HC_GPIO_LED_WPS,
+ .active_low = 1,
+ },
+ {
+ .name = "archer-c59-v1:green:usb",
+ .gpio = ARCHER_C59_74HC_GPIO_LED_USB,
+ .active_low = 1,
+ },
+};
+
+static struct gpio_keys_button archer_c59_v1_gpio_keys[] __initdata = {
+ {
+ .desc = "Reset button",
+ .type = EV_KEY,
+ .code = KEY_RESTART,
+ .debounce_interval = ARCHER_C59_V1_KEYS_DEBOUNCE_INTERVAL,
+ .gpio = ARCHER_C59_V1_GPIO_BTN_RESET,
+ .active_low = 1,
+ },
+ {
+ .desc = "RFKILL button",
+ .type = EV_KEY,
+ .code = KEY_RFKILL,
+ .debounce_interval = ARCHER_C59_V1_KEYS_DEBOUNCE_INTERVAL,
+ .gpio = ARCHER_C59_V1_GPIO_BTN_RFKILL,
+ .active_low = 1,
+ },
+ {
+ .desc = "WPS button",
+ .type = EV_KEY,
+ .code = KEY_WPS_BUTTON,
+ .debounce_interval = ARCHER_C59_V1_KEYS_DEBOUNCE_INTERVAL,
+ .gpio = ARCHER_C59_V1_GPIO_BTN_WPS,
+ .active_low = 1,
+ },
+};
+
+static struct spi_gpio_platform_data archer_c59_v1_spi_data = {
+ .sck = ARCHER_C59_GPIO_SHIFT_SRCLK,
+ .miso = SPI_GPIO_NO_MISO,
+ .mosi = ARCHER_C59_GPIO_SHIFT_SER,
+ .num_chipselect = 1,
+};
+
+static u8 archer_c59_v1_ssr_initdata[] __initdata = {
+ BIT(ARCHER_C59_V1_SSR_BIT_7) |
+ BIT(ARCHER_C59_V1_SSR_BIT_6) |
+ BIT(ARCHER_C59_V1_SSR_BIT_5) |
+ BIT(ARCHER_C59_V1_SSR_BIT_4) |
+ BIT(ARCHER_C59_V1_SSR_BIT_3) |
+ BIT(ARCHER_C59_V1_SSR_BIT_2) |
+ BIT(ARCHER_C59_V1_SSR_BIT_1)
+};
+
+static struct gen_74x164_chip_platform_data archer_c59_v1_ssr_data = {
+ .base = ARCHER_C59_74HC_GPIO_BASE,
+ .num_registers = ARRAY_SIZE(archer_c59_v1_ssr_initdata),
+ .init_data = archer_c59_v1_ssr_initdata,
+};
+
+static struct platform_device archer_c59_v1_spi_device = {
+ .name = "spi_gpio",
+ .id = 1,
+ .dev = {
+ .platform_data = &archer_c59_v1_spi_data,
+ },
+};
+
+static struct spi_board_info archer_c59_v1_spi_info[] = {
+ {
+ .bus_num = 1,
+ .chip_select = 0,
+ .max_speed_hz = 10000000,
+ .modalias = "74x164",
+ .platform_data = &archer_c59_v1_ssr_data,
+ .controller_data = (void *) ARCHER_C59_GPIO_SHIFT_RCLK,
+ },
+};
+
+static void __init archer_c59_v1_setup(void)
+{
+ u8 *mac = (u8 *) KSEG1ADDR(0x1f010008);
+ u8 *art = (u8 *) KSEG1ADDR(0x1fff0000);
+
+ ath79_register_m25p80(NULL);
+ spi_register_board_info(archer_c59_v1_spi_info,
+ ARRAY_SIZE(archer_c59_v1_spi_info));
+ platform_device_register(&archer_c59_v1_spi_device);
+
+ ath79_register_leds_gpio(-1, ARRAY_SIZE(archer_c59_v1_leds_gpio),
+ archer_c59_v1_leds_gpio);
+
+ ath79_register_gpio_keys_polled(-1, ARCHER_C59_V1_KEYS_POLL_INTERVAL,
+ ARRAY_SIZE(archer_c59_v1_gpio_keys),
+ archer_c59_v1_gpio_keys);
+
+ ath79_register_mdio(1, 0x0);
+
+ ath79_eth1_data.phy_if_mode = PHY_INTERFACE_MODE_GMII;
+ ath79_init_mac(ath79_eth1_data.mac_addr, mac, 0);
+ ath79_eth1_data.speed = SPEED_1000;
+ ath79_eth1_data.duplex = DUPLEX_FULL;
+ ath79_eth1_data.phy_mask = BIT(4);
+ ath79_register_eth(1);
+
+ ath79_register_wmac(art + ARCHER_C59_V1_WMAC_CALDATA_OFFSET, mac);
+ ap91_pci_init(art + ARCHER_C59_V1_PCI_CALDATA_OFFSET, NULL);
+
+
+ ath79_register_usb();
+ gpio_request_one(ARCHER_C59_V1_GPIO_USB_POWER,
+ GPIOF_OUT_INIT_HIGH | GPIOF_EXPORT_DIR_FIXED,
+ "USB power");
+ gpio_request_one(ARCHER_C59_GPIO_SHIFT_OE,
+ GPIOF_OUT_INIT_LOW | GPIOF_EXPORT_DIR_FIXED,
+ "LED control");
+ gpio_request_one(ARCHER_C59_GPIO_SHIFT_SRCLR,
+ GPIOF_OUT_INIT_HIGH | GPIOF_EXPORT_DIR_FIXED,
+ "LED reset");
+}
+
+MIPS_MACHINE(ATH79_MACH_ARCHER_C59_V1, "ARCHER-C59-V1",
+ "TP-LINK Archer C59 v1", archer_c59_v1_setup);
diff --git a/target/linux/ar71xx/files/arch/mips/ath79/mach-archer-c60-v1.c b/target/linux/ar71xx/files/arch/mips/ath79/mach-archer-c60-v1.c
new file mode 100644
index 0000000000000000000000000000000000000000..78186f02cda0a231afda4e53a1d6ff696ecb6b4a
--- /dev/null
+++ b/target/linux/ar71xx/files/arch/mips/ath79/mach-archer-c60-v1.c
@@ -0,0 +1,135 @@
+/*
+ * TP-Link Archer C60 v1 board support
+ *
+ * Copyright (C) 2016 Henryk Heisig <hyniu@o2.pl>
+ *
+ * This program is free software; you can redistribute it and/or modify it
+ * under the terms of the GNU General Public License version 2 as published
+ * by the Free Software Foundation.
+ */
+#include <linux/platform_device.h>
+#include <linux/ath9k_platform.h>
+#include <linux/ar8216_platform.h>
+#include <asm/mach-ath79/ar71xx_regs.h>
+#include <linux/gpio.h>
+
+#include "common.h"
+#include "dev-m25p80.h"
+#include "machtypes.h"
+#include "pci.h"
+#include "dev-ap9x-pci.h"
+#include "dev-eth.h"
+#include "dev-gpio-buttons.h"
+#include "dev-leds-gpio.h"
+#include "dev-spi.h"
+#include "dev-usb.h"
+#include "dev-wmac.h"
+
+#define ARCHER_C60_V1_GPIO_LED_LAN 2
+#define ARCHER_C60_V1_GPIO_LED_POWER 16
+#define ARCHER_C60_V1_GPIO_LED_WLAN2 17
+#define ARCHER_C60_V1_GPIO_LED_WLAN5 18
+#define ARCHER_C60_V1_GPIO_LED_WPS 19
+#define ARCHER_C60_V1_GPIO_LED_WAN_GREEN 20
+#define ARCHER_C60_V1_GPIO_LED_WAN_AMBER 22
+
+
+#define ARCHER_C60_V1_KEYS_POLL_INTERVAL 20
+#define ARCHER_C60_V1_KEYS_DEBOUNCE_INTERVAL (3 * ARCHER_C60_V1_KEYS_POLL_INTERVAL)
+
+#define ARCHER_C60_V1_GPIO_BTN_RESET 21
+#define ARCHER_C60_V1_GPIO_BTN_RFKILL 1
+
+
+
+#define ARCHER_C60_V1_WMAC_CALDATA_OFFSET 0x1000
+#define ARCHER_C60_V1_PCI_CALDATA_OFFSET 0x5000
+
+static struct gpio_led archer_c60_v1_leds_gpio[] __initdata = {
+ {
+ .name = "archer-c60-v1:green:power",
+ .gpio = ARCHER_C60_V1_GPIO_LED_POWER,
+ .active_low = 1,
+ },
+ {
+ .name = "archer-c60-v1:green:wlan2g",
+ .gpio = ARCHER_C60_V1_GPIO_LED_WLAN2,
+ .active_low = 1,
+ },
+ {
+ .name = "archer-c60-v1:green:wlan5g",
+ .gpio = ARCHER_C60_V1_GPIO_LED_WLAN5,
+ .active_low = 1,
+ },
+ {
+ .name = "archer-c60-v1:green:lan",
+ .gpio = ARCHER_C60_V1_GPIO_LED_LAN,
+ .active_low = 1,
+ },
+ {
+ .name = "archer-c60-v1:green:wan",
+ .gpio = ARCHER_C60_V1_GPIO_LED_WAN_GREEN,
+ .active_low = 1,
+ },
+ {
+ .name = "archer-c60-v1:amber:wan",
+ .gpio = ARCHER_C60_V1_GPIO_LED_WAN_AMBER,
+ .active_low = 1,
+ },
+ {
+ .name = "archer-c60-v1:green:wps",
+ .gpio = ARCHER_C60_V1_GPIO_LED_WPS,
+ .active_low = 1,
+ },
+};
+
+static struct gpio_keys_button archer_c60_v1_gpio_keys[] __initdata = {
+ {
+ .desc = "Reset button",
+ .type = EV_KEY,
+ .code = KEY_RESTART,
+ .debounce_interval = ARCHER_C60_V1_KEYS_DEBOUNCE_INTERVAL,
+ .gpio = ARCHER_C60_V1_GPIO_BTN_RESET,
+ .active_low = 1,
+ },
+ {
+ .desc = "RFKILL button",
+ .type = EV_KEY,
+ .code = KEY_RFKILL,
+ .debounce_interval = ARCHER_C60_V1_KEYS_DEBOUNCE_INTERVAL,
+ .gpio = ARCHER_C60_V1_GPIO_BTN_RFKILL,
+ .active_low = 1,
+ },
+};
+
+static void __init archer_c60_v1_setup(void)
+{
+ u8 *mac = (u8 *) KSEG1ADDR(0x1f010008);
+ u8 *art = (u8 *) KSEG1ADDR(0x1f7f0000);
+
+ ath79_register_m25p80(NULL);
+
+ ath79_register_leds_gpio(-1, ARRAY_SIZE(archer_c60_v1_leds_gpio),
+ archer_c60_v1_leds_gpio);
+
+ ath79_register_gpio_keys_polled(-1, ARCHER_C60_V1_KEYS_POLL_INTERVAL,
+ ARRAY_SIZE(archer_c60_v1_gpio_keys),
+ archer_c60_v1_gpio_keys);
+
+ ath79_setup_qca956x_eth_cfg(QCA956X_ETH_CFG_SW_PHY_SWAP |
+ QCA956X_ETH_CFG_SW_PHY_ADDR_SWAP);
+ ath79_register_mdio(1, 0x0);
+
+ ath79_init_mac(ath79_eth1_data.mac_addr, mac, 0);
+
+ ath79_eth1_data.phy_if_mode = PHY_INTERFACE_MODE_GMII;
+ ath79_eth1_data.speed = SPEED_1000;
+ ath79_eth1_data.duplex = DUPLEX_FULL;
+ ath79_register_eth(1);
+
+ ath79_register_wmac(art + ARCHER_C60_V1_WMAC_CALDATA_OFFSET, mac);
+ ap91_pci_init(art + ARCHER_C60_V1_PCI_CALDATA_OFFSET, NULL);
+}
+
+MIPS_MACHINE(ATH79_MACH_ARCHER_C60_V1, "ARCHER-C60-V1",
+ "TP-LINK Archer C60 v1", archer_c60_v1_setup);
diff --git a/target/linux/ar71xx/files/arch/mips/ath79/machtypes.h b/target/linux/ar71xx/files/arch/mips/ath79/machtypes.h
index e4623fd08836d59ad4e79e96f02e75e502a55ca6..9fbf354e44992f4dff43df0fb0ea99c344801d97 100644
--- a/target/linux/ar71xx/files/arch/mips/ath79/machtypes.h
+++ b/target/linux/ar71xx/files/arch/mips/ath79/machtypes.h
@@ -42,6 +42,8 @@ enum ath79_mach_type {
ATH79_MACH_AP96, /* Atheros AP96 */
ATH79_MACH_ARCHER_C25_V1, /* TP-LINK Archer C25 V1 board */
ATH79_MACH_ARCHER_C5, /* TP-LINK Archer C5 board */
+ ATH79_MACH_ARCHER_C59_V1, /* TP-LINK Archer C59 V1 board */
+ ATH79_MACH_ARCHER_C60_V1, /* TP-LINK Archer C60 V1 board */
ATH79_MACH_ARCHER_C7, /* TP-LINK Archer C7 board */
ATH79_MACH_ARCHER_C7_V2, /* TP-LINK Archer C7 V2 board */
ATH79_MACH_ARCHER_C7_V4, /* TP-LINK Archer C7 V4 board */
diff --git a/target/linux/ar71xx/image/tp-link.mk b/target/linux/ar71xx/image/tp-link.mk
index 27d6c73454aef96e5da47033ec664d2caffca1d5..9e4aa8ea30aedba8050a77ebdcfc8f0034cc14d1 100644
--- a/target/linux/ar71xx/image/tp-link.mk
+++ b/target/linux/ar71xx/image/tp-link.mk
@@ -119,6 +119,36 @@ define Device/archer-c25-v1
endef
TARGET_DEVICES += archer-c25-v1
+define Device/archer-c59-v1
+ DEVICE_TITLE := TP-LINK Archer C59 v1
+ DEVICE_PACKAGES := kmod-usb-core kmod-usb2 kmod-usb-ledtrig-usbport kmod-ath10k
+ BOARDNAME := ARCHER-C59-V1
+ TPLINK_BOARD_NAME := ARCHER-C59-V1
+ DEVICE_PROFILE := ARCHERC59V1
+ IMAGE_SIZE := 14528k
+ KERNEL := kernel-bin | patch-cmdline | lzma | uImageArcher lzma
+ IMAGES := sysupgrade.bin factory.bin
+ IMAGE/sysupgrade.bin := append-rootfs | tplink-safeloader sysupgrade
+ IMAGE/factory.bin := append-rootfs | tplink-safeloader factory
+ MTDPARTS := spi0.0:64k(u-boot)ro,64k(mac)ro,1536k(kernel),12992k(rootfs),1664k(tplink)ro,64k(art)ro,14528k@0x20000(firmware)
+endef
+TARGET_DEVICES += archer-c59-v1
+
+define Device/archer-c60-v1
+ DEVICE_TITLE := TP-LINK Archer C60 v1
+ DEVICE_PACKAGES := kmod-ath10k
+ BOARDNAME := ARCHER-C60-V1
+ TPLINK_BOARD_NAME := ARCHER-C60-V1
+ DEVICE_PROFILE := ARCHERC60V1
+ IMAGE_SIZE := 7936k
+ KERNEL := kernel-bin | patch-cmdline | lzma | uImageArcher lzma
+ IMAGES := sysupgrade.bin factory.bin
+ IMAGE/sysupgrade.bin := append-rootfs | tplink-safeloader sysupgrade
+ IMAGE/factory.bin := append-rootfs | tplink-safeloader factory
+ MTDPARTS := spi0.0:64k(u-boot)ro,64k(mac)ro,1344k(kernel),6592k(rootfs),64k(tplink)ro,64k(art)ro,7936k@0x20000(firmware)
+endef
+TARGET_DEVICES += archer-c60-v1
+
define Device/cpe510-520
DEVICE_TITLE := TP-LINK CPE510/520
DEVICE_PACKAGES := rssileds
diff --git a/target/linux/ar71xx/mikrotik/config-default b/target/linux/ar71xx/mikrotik/config-default
index f5af38a726f5ce33391223a4dbeb2fc0a8cac613..3f6884dcf44c83f9867e4e9936caa79c0abc5dc1 100644
--- a/target/linux/ar71xx/mikrotik/config-default
+++ b/target/linux/ar71xx/mikrotik/config-default
@@ -17,6 +17,8 @@
# CONFIG_ATH79_MACH_AP90Q is not set
# CONFIG_ATH79_MACH_AP96 is not set
# CONFIG_ATH79_MACH_ARCHER_C25_V1 is not set
+# CONFIG_ATH79_MACH_ARCHER_C59_V1 is not set
+# CONFIG_ATH79_MACH_ARCHER_C60_V1 is not set
# CONFIG_ATH79_MACH_ARCHER_C7 is not set
# CONFIG_ATH79_MACH_ARDUINO_YUN is not set
# CONFIG_ATH79_MACH_AW_NR580 is not set
diff --git a/target/linux/ar71xx/nand/config-default b/target/linux/ar71xx/nand/config-default
index 5c18f5d594d625f91ff10e21ddc5af2b3b4d768f..a50099aca12aafdcb27f4f2b77ca2a5ce4b4d6f2 100644
--- a/target/linux/ar71xx/nand/config-default
+++ b/target/linux/ar71xx/nand/config-default
@@ -10,6 +10,8 @@
# CONFIG_ATH79_MACH_AP147 is not set
# CONFIG_ATH79_MACH_AP96 is not set
# CONFIG_ATH79_MACH_ARCHER_C25_V1 is not set
+# CONFIG_ATH79_MACH_ARCHER_C59_V1 is not set
+# CONFIG_ATH79_MACH_ARCHER_C60_V1 is not set
# CONFIG_ATH79_MACH_ARCHER_C7 is not set
# CONFIG_ATH79_MACH_AW_NR580 is not set
# CONFIG_ATH79_MACH_CAP324 is not set
diff --git a/tools/firmware-utils/src/tplink-safeloader.c b/tools/firmware-utils/src/tplink-safeloader.c
index fec830c23ce6707755ddefc849f195872be1e877..aeebf8e0bbdc3ec53c42d5cc01a3ffe892b46804 100644
--- a/tools/firmware-utils/src/tplink-safeloader.c
+++ b/tools/firmware-utils/src/tplink-safeloader.c
@@ -376,6 +376,79 @@ static struct device_info boards[] = {
.last_sysupgrade_partition = "file-system"
},
+ /** Firmware layout for the C59v1 */
+ {
+ .id = "ARCHER-C59-V1",
+ .vendor = "",
+ .support_list =
+ "SupportList:\r\n"
+ "{product_name:Archer C59,product_ver:1.0.0,special_id:00000000}\r\n"
+ "{product_name:Archer C59,product_ver:1.0.0,special_id:45550000}\r\n"
+ "{product_name:Archer C59,product_ver:1.0.0,special_id:55530000}\r\n",
+ .support_trail = '\x00',
+ .soft_ver = "soft_ver:1.0.0\n",
+
+ .partitions = {
+ {"fs-uboot", 0x00000, 0x10000},
+ {"default-mac", 0x10000, 0x00200},
+ {"pin", 0x10200, 0x00200},
+ {"device-id", 0x10400, 0x00100},
+ {"product-info", 0x10500, 0x0fb00},
+ {"os-image", 0x20000, 0x180000},
+ {"file-system", 0x1a0000, 0xcb0000},
+ {"partition-table", 0xe50000, 0x10000},
+ {"soft-version", 0xe60000, 0x10000},
+ {"support-list", 0xe70000, 0x10000},
+ {"profile", 0xe80000, 0x10000},
+ {"default-config", 0xe90000, 0x10000},
+ {"user-config", 0xea0000, 0x40000},
+ {"usb-config", 0xee0000, 0x10000},
+ {"certificate", 0xef0000, 0x10000},
+ {"qos-db", 0xf00000, 0x40000},
+ {"log", 0xfe0000, 0x10000},
+ {"radio", 0xff0000, 0x10000},
+ {NULL, 0, 0}
+ },
+
+ .first_sysupgrade_partition = "os-image",
+ .last_sysupgrade_partition = "file-system",
+ },
+
+ /** Firmware layout for the C60v1 */
+ {
+ .id = "ARCHER-C60-V1",
+ .vendor = "",
+ .support_list =
+ "SupportList:\r\n"
+ "{product_name:Archer C60,product_ver:1.0.0,special_id:00000000}\r\n"
+ "{product_name:Archer C60,product_ver:1.0.0,special_id:45550000}\r\n"
+ "{product_name:Archer C60,product_ver:1.0.0,special_id:55530000}\r\n",
+ .support_trail = '\x00',
+ .soft_ver = "soft_ver:1.0.0\n",
+
+ .partitions = {
+ {"fs-uboot", 0x00000, 0x10000},
+ {"default-mac", 0x10000, 0x00200},
+ {"pin", 0x10200, 0x00200},
+ {"product-info", 0x10400, 0x00100},
+ {"partition-table", 0x10500, 0x00800},
+ {"soft-version", 0x11300, 0x00200},
+ {"support-list", 0x11500, 0x00100},
+ {"device-id", 0x11600, 0x00100},
+ {"profile", 0x11700, 0x03900},
+ {"default-config", 0x15000, 0x04000},
+ {"user-config", 0x19000, 0x04000},
+ {"os-image", 0x20000, 0x150000},
+ {"file-system", 0x170000, 0x678000},
+ {"certyficate", 0x7e8000, 0x08000},
+ {"radio", 0x7f0000, 0x10000},
+ {NULL, 0, 0}
+ },
+
+ .first_sysupgrade_partition = "os-image",
+ .last_sysupgrade_partition = "file-system",
+ },
+
/** Firmware layout for the C7 */
{
.id = "ARCHER-C7-V4",
Reference in New Issue Copy Permalink