gluon/docs/user/supported_devices.rst

Supported Devices & Architectures
=================================

ar71xx-generic
--------------

* 8devices

  - Carambola 2

* ALFA Network

  - AP121 [#deprecated]_
  - AP121F
  - AP121U [#deprecated]_

* Allnet

  - ALL0315N

* AVM

  - Fritz!Box 4020 [#avmflash]_
  - Fritz!WLAN Repeater 300E [#avmflash]_
  - Fritz!WLAN Repeater 450E [#avmflash]_

* Buffalo

  - WZR-HP-AG300H / WZR-600DHP
  - WZR-HP-G300NH
  - WZR-HP-G300NH2
  - WZR-HP-G450H

* D-Link

  - DAP-1330 (A1)
  - DIR-505 (A1, A2)
  - DIR-825 (B1)

* GL.iNet

  - 6408A
  - 6416A
  - GL-AR150
  - GL-AR300M
  - GL-AR750

* Linksys

  - WRT160NL

* Netgear

  - WNDR3700 (v1, v2)
  - WNDR3800
  - WNDRMAC (v2)

* OCEDO

  - Koala

* OpenMesh

  - A40
  - A60
  - MR600 (v1, v2)
  - MR900 (v1, v2)
  - MR1750 (v1, v2)
  - OM2P (v1, v2, v4)
  - OM2P-HS (v1, v2, v3, v4)
  - OM2P-LC
  - OM5P
  - OM5P-AN
  - OM5P-AC (v1, v2)

* TP-Link

  - Archer C5 (v1)
  - Archer C59 (v1)
  - Archer C7 (v2, v4, v5)
  - CPE210 (v1.0, v1.1, v2.0, v3.0)
  - CPE220 (v1.1)
  - CPE510 (v1.0, v1.1)
  - CPE520 (v1.1)
  - RE450 (v1)
  - TL-WDR3500 (v1)
  - TL-WDR3600 (v1)
  - TL-WDR4300 (v1)
  - TL-WR710N (v1, v2.1)
  - TL-WR810N (v1)
  - TL-WR842N/ND (v1, v2, v3)
  - TL-WR1043N/ND (v1, v2, v3, v4, v5)
  - TL-WR2543N/ND (v1)
  - WBS210 (v1.20)
  - WBS510 (v1.20)

* Ubiquiti

  - Air Gateway
  - Air Gateway LR
  - Air Gateway PRO
  - Air Router
  - Bullet M2/M5
  - Loco M2/M5
  - Loco M2/M5 XW
  - Nanostation M2/M5
  - Nanostation M2/M5 XW
  - Picostation M2
  - Rocket M2/M5
  - Rocket M2/M5 Ti
  - Rocket M2/M5 XW
  - UniFi AC Mesh
  - UniFi AC Mesh Pro
  - UniFi AP
  - UniFi AP AC Lite
  - UniFi AP AC LR
  - UniFi AP AC Pro
  - UniFi AP LR
  - UniFi AP Pro
  - UniFi AP Outdoor
  - UniFi AP Outdoor+

* Western Digital

  - My Net N600
  - My Net N750

* ZyXEL

  - NBG6616

ar71xx-nand
-----------

* Aerohive

  - HiveAP 121

* Netgear

  - WNDR3700 (v4)
  - WNDR4300 (v1)

* ZyXEL

  - NBG6716

ar71xx-tiny [#deprecated]_
--------------------------

* D-Link

  - DIR-615 (C1)

* TP-Link

  - TL-MR13U (v1)
  - TL-MR3020 (v1)
  - TL-MR3040 (v1, v2)
  - TL-MR3220 (v1, v2)
  - TL-MR3420 (v1, v2)
  - TL-WA701N/ND (v1, v2)
  - TL-WA730RE (v1)
  - TL-WA750RE (v1)
  - TL-WA801N/ND (v1, v2, v3)
  - TL-WA830RE (v1, v2)
  - TL-WA850RE (v1)
  - TL-WA860RE (v1)
  - TL-WA901N/ND (v1, v2, v3, v4, v5)
  - TL-WA7210N (v2)
  - TL-WA7510N (v1)
  - TL-WR703N (v1)
  - TL-WR710N (v2)
  - TL-WR740N (v1, v3, v4, v5)
  - TL-WR741N/ND (v1, v2, v4, v5)
  - TL-WR743N/ND (v1, v2)
  - TL-WR840N (v2)
  - TL-WR841N/ND (v3, v5, v7, v8, v9, v10, v11, v12)
  - TL-WR843N/ND (v1)
  - TL-WR940N (v1, v2, v3, v4, v5, v6)
  - TL-WR941ND (v2, v3, v4, v5, v6)

ath79-generic
--------------

* devolo

  - WiFi pro 1200e [#lan_as_wan]_
  - WiFi pro 1200i
  - WiFi pro 1750c
  - WiFi pro 1750e [#lan_as_wan]_
  - WiFi pro 1750i
  - WiFi pro 1750x

* GL.iNet

  - GL-AR300M-Lite

* OCEDO

  - Raccoon

* TP-Link

  - Archer C6 (v2)

brcm2708-bcm2708
----------------

* RaspberryPi 1

brcm2708-bcm2709
----------------

* RaspberryPi 2


ipq40xx-generic
---------------

* AVM

  - FRITZ!Box 4040 [#avmflash]_
  - FRITZ!Repeater 1200 [#eva_ramboot]_

* EnGenius

  - ENS620EXT

* GL.iNet

  - GL-B1300

* NETGEAR

  - EX6100 (v2)
  - EX6150 (v2)

* OpenMesh

  - A42
  - A62

* ZyXEL

  - NBG6617
  - WRE6606

ipq806x-generic
---------------

* NETGEAR

  - R7800

lantiq-xrx200
-------------

* AVM

  - FRITZ!Box 7360 (v1, v2) [#avmflash]_ [#lan_as_wan]_
  - FRITZ!Box 7360 SL [#avmflash]_ [#lan_as_wan]_
  - FRITZ!Box 7362 SL [#eva_ramboot]_ [#lan_as_wan]_
  - FRITZ!Box 7412 [#eva_ramboot]_

lantiq-xway
-----------

* AVM

  - FRITZ!Box 7312 [#avmflash]_
  - FRITZ!Box 7320 [#avmflash]_ [#lan_as_wan]_
  - FRITZ!Box 7330 [#avmflash]_ [#lan_as_wan]_
  - FRITZ!Box 7330 SL [#avmflash]_ [#lan_as_wan]_

mpc85xx-generic
---------------

* TP-Link

  - TL-WDR4900 (v1)

mpc85xx-p1020
---------------

* Aerohive

  - HiveAP 330

* Enterasys

  - WS-AP3710i

* OCEDO

  - Panda

ramips-mt7620
-------------

* GL.iNet

  - GL-MT300A
  - GL-MT300N
  - GL-MT750

* Nexx

  - WT3020AD/F/H

* TP-Link

  - Archer C2 v1
  - Archer C20 (v1)
  - Archer C20i
  - Archer C50 v1

* Xiaomi

  - MiWiFi Mini

ramips-mt7621
-------------

* ASUS

  - RT-AC57U

* D-Link

  - DIR-860L (B1)

* NETGEAR

  - EX6150 (v1)
  - R6220

* Ubiquiti

  - EdgeRouter X
  - EdgeRouter X-SFP

* ZBT

  - WG3526-16M
  - WG3526-32M

ramips-mt76x8
-------------

* GL.iNet

  - GL-MT300N v2
  - VIXMINI

* NETGEAR

  - R6120

* TP-Link

  - Archer C50 v3
  - Archer C50 v4
  - TL-MR3020 v3
  - TL-MR3420 v5
  - TL-WA801ND v5
  - TL-WR841N v13
  - TL-WR902AC v3

* VoCore

  - VoCore2

ramips-rt305x [#deprecated]_
----------------------------

* A5-V11

* D-Link

  - DIR-615 (D1, D2, D3, D4, H1)

* VoCore

  - VoCore (8M, 16M)

sunxi-cortexa7
--------------

* LeMaker

  - Banana Pi M1

x86-generic
-----------

* x86-generic
* x86-virtualbox
* x86-vmware

See also: :doc:`x86`

x86-geode
---------

* x86-geode

See also: :doc:`x86`

x86-64
------

* x86-64-generic
* x86-64-virtualbox
* x86-64-vmware

See also: :doc:`x86`

Footnotes
---------

.. [#deprecated]
  The device or target is reaching its end of life soon. This means that support
  in the next major release of Gluon is doubtful.

.. [#avmflash]
  For instructions on how to flash AVM devices, visit https://fritzfla.sh

.. [#eva_ramboot]
  For instructions on how to flash AVM NAND devices, see the respective
  commit which added support in OpenWrt.

.. [#lan_as_wan]
  All LAN ports on this device are used as WAN.
docs: move supported devices to own page (#1797) 2019-08-21 21:46:08 +00:00			`Supported Devices & Architectures`
			`=================================`

			`ar71xx-generic`
			`--------------`

			`* 8devices`

			`- Carambola 2`

			`* ALFA Network`

ar71xx-generic: deprecate ALFA AP121, Hornet-UB, Tube2H, N2/N5 The kernel partition on these devices is too small for the OpenWrt 19.07 kernel. It is also located after the rootfs, so we cannot grow it further. Therefore mark these devices as deprecated now. 2019-09-19 13:32:15 +00:00			`- AP121 [#deprecated]_`
docs: move supported devices to own page (#1797) 2019-08-21 21:46:08 +00:00			`- AP121F`
ar71xx-generic: deprecate ALFA AP121, Hornet-UB, Tube2H, N2/N5 The kernel partition on these devices is too small for the OpenWrt 19.07 kernel. It is also located after the rootfs, so we cannot grow it further. Therefore mark these devices as deprecated now. 2019-09-19 13:32:15 +00:00			`- AP121U [#deprecated]_`
docs: move supported devices to own page (#1797) 2019-08-21 21:46:08 +00:00
			`* Allnet`

			`- ALL0315N`

			`* AVM`

			`- Fritz!Box 4020 [#avmflash]_`
			`- Fritz!WLAN Repeater 300E [#avmflash]_`
			`- Fritz!WLAN Repeater 450E [#avmflash]_`

			`* Buffalo`

			`- WZR-HP-AG300H / WZR-600DHP`
			`- WZR-HP-G300NH`
			`- WZR-HP-G300NH2`
			`- WZR-HP-G450H`

			`* D-Link`

			`- DAP-1330 (A1)`
			`- DIR-505 (A1, A2)`
			`- DIR-825 (B1)`

docs: rename vendor to GL.iNet for uniformity 2020-01-31 18:42:12 +00:00			`* GL.iNet`
docs: move supported devices to own page (#1797) 2019-08-21 21:46:08 +00:00
docs: GL.iNet 64xx: remove vendor and version - vendor name should not be part of model name - there's no other version, hence mentioning the version is superfluous 2020-02-01 23:26:44 +00:00			`- 6408A`
			`- 6416A`
docs: move supported devices to own page (#1797) 2019-08-21 21:46:08 +00:00			`- GL-AR150`
			`- GL-AR300M`
docs: update for reflect dropped IBSS support 2019-11-05 19:50:37 +00:00			`- GL-AR750`
docs: move supported devices to own page (#1797) 2019-08-21 21:46:08 +00:00
			`* Linksys`

			`- WRT160NL`

			`* Netgear`

docs: remove Netgear WNDR3700 v5 (#1817) 2019-09-15 12:28:23 +00:00			`- WNDR3700 (v1, v2)`
docs: move supported devices to own page (#1797) 2019-08-21 21:46:08 +00:00			`- WNDR3800`
			`- WNDRMAC (v2)`

			`* OCEDO`

docs: update for reflect dropped IBSS support 2019-11-05 19:50:37 +00:00			`- Koala`
docs: move supported devices to own page (#1797) 2019-08-21 21:46:08 +00:00
			`* OpenMesh`

			`- A40`
			`- A60`
			`- MR600 (v1, v2)`
			`- MR900 (v1, v2)`
docs: update for reflect dropped IBSS support 2019-11-05 19:50:37 +00:00			`- MR1750 (v1, v2)`
docs: move supported devices to own page (#1797) 2019-08-21 21:46:08 +00:00			`- OM2P (v1, v2, v4)`
			`- OM2P-HS (v1, v2, v3, v4)`
			`- OM2P-LC`
			`- OM5P`
			`- OM5P-AN`
docs: update for reflect dropped IBSS support 2019-11-05 19:50:37 +00:00			`- OM5P-AC (v1, v2)`
docs: move supported devices to own page (#1797) 2019-08-21 21:46:08 +00:00
			`* TP-Link`

docs: update for reflect dropped IBSS support 2019-11-05 19:50:37 +00:00			`- Archer C5 (v1)`
			`- Archer C59 (v1)`
			`- Archer C7 (v2, v4, v5)`
docs: move supported devices to own page (#1797) 2019-08-21 21:46:08 +00:00			`- CPE210 (v1.0, v1.1, v2.0, v3.0)`
			`- CPE220 (v1.1)`
			`- CPE510 (v1.0, v1.1)`
			`- CPE520 (v1.1)`
docs: add revision number to TP-Link RE450 support list entry We only support v1, not v2 or v3. 2019-12-07 20:40:01 +00:00			`- RE450 (v1)`
docs: move supported devices to own page (#1797) 2019-08-21 21:46:08 +00:00			`- TL-WDR3500 (v1)`
			`- TL-WDR3600 (v1)`
			`- TL-WDR4300 (v1)`
			`- TL-WR710N (v1, v2.1)`
			`- TL-WR810N (v1)`
			`- TL-WR842N/ND (v1, v2, v3)`
			`- TL-WR1043N/ND (v1, v2, v3, v4, v5)`
			`- TL-WR2543N/ND (v1)`
			`- WBS210 (v1.20)`
			`- WBS510 (v1.20)`

			`* Ubiquiti`

			`- Air Gateway`
			`- Air Gateway LR`
			`- Air Gateway PRO`
			`- Air Router`
			`- Bullet M2/M5`
			`- Loco M2/M5`
			`- Loco M2/M5 XW`
			`- Nanostation M2/M5`
			`- Nanostation M2/M5 XW`
			`- Picostation M2`
			`- Rocket M2/M5`
			`- Rocket M2/M5 Ti`
			`- Rocket M2/M5 XW`
docs: update for reflect dropped IBSS support 2019-11-05 19:50:37 +00:00			`- UniFi AC Mesh`
			`- UniFi AC Mesh Pro`
docs: move supported devices to own page (#1797) 2019-08-21 21:46:08 +00:00			`- UniFi AP`
docs: update for reflect dropped IBSS support 2019-11-05 19:50:37 +00:00			`- UniFi AP AC Lite`
			`- UniFi AP AC LR`
			`- UniFi AP AC Pro`
docs: move supported devices to own page (#1797) 2019-08-21 21:46:08 +00:00			`- UniFi AP LR`
			`- UniFi AP Pro`
			`- UniFi AP Outdoor`
			`- UniFi AP Outdoor+`

			`* Western Digital`

			`- My Net N600`
			`- My Net N750`

			`* ZyXEL`

docs: update for reflect dropped IBSS support 2019-11-05 19:50:37 +00:00			`- NBG6616`
docs: move supported devices to own page (#1797) 2019-08-21 21:46:08 +00:00
			`ar71xx-nand`
			`-----------`

			`* Aerohive`

			`- HiveAP 121`

			`* Netgear`

			`- WNDR3700 (v4)`
			`- WNDR4300 (v1)`

			`* ZyXEL`

docs: update for reflect dropped IBSS support 2019-11-05 19:50:37 +00:00			`- NBG6716`
docs: move supported devices to own page (#1797) 2019-08-21 21:46:08 +00:00
docs: mark ar71xx-tiny and ramips-rt305x as deprecated 2019-09-19 13:31:23 +00:00			`ar71xx-tiny [#deprecated]_`
			`--------------------------`
docs: move supported devices to own page (#1797) 2019-08-21 21:46:08 +00:00
			`* D-Link`

			`- DIR-615 (C1)`

			`* TP-Link`

			`- TL-MR13U (v1)`
			`- TL-MR3020 (v1)`
			`- TL-MR3040 (v1, v2)`
			`- TL-MR3220 (v1, v2)`
			`- TL-MR3420 (v1, v2)`
			`- TL-WA701N/ND (v1, v2)`
			`- TL-WA730RE (v1)`
			`- TL-WA750RE (v1)`
			`- TL-WA801N/ND (v1, v2, v3)`
			`- TL-WA830RE (v1, v2)`
			`- TL-WA850RE (v1)`
			`- TL-WA860RE (v1)`
			`- TL-WA901N/ND (v1, v2, v3, v4, v5)`
			`- TL-WA7210N (v2)`
			`- TL-WA7510N (v1)`
			`- TL-WR703N (v1)`
			`- TL-WR710N (v2)`
			`- TL-WR740N (v1, v3, v4, v5)`
			`- TL-WR741N/ND (v1, v2, v4, v5)`
			`- TL-WR743N/ND (v1, v2)`
			`- TL-WR840N (v2)`
			`- TL-WR841N/ND (v3, v5, v7, v8, v9, v10, v11, v12)`
			`- TL-WR843N/ND (v1)`
			`- TL-WR940N (v1, v2, v3, v4, v5, v6)`
			`- TL-WR941ND (v2, v3, v4, v5, v6)`

ath79-generic: add support for TP-Link Archer C6v2 Hardware specification: - SOC: Qualcomm QCA9563 @ 775MHz - Flash: GigaDevice GD25Q64CSIG (8MiB) - RAM: Zentel A3R1GE40JBF (128 MiB DDR2) - Ethernet: Qualcomm QCA8337N: 4x 1Gbps LAN + 1x 1Gbps WAN - Wireless: - 2.4GHz (bgn) QCA9563 integrated (3x3) - 5GHz (ac) Qualcomm QCA9886 (2x2) - Button: 1x power, 1x reset, 1x wps - LED: 6x LEDs: power, wlan2g, wlan5g, lan, wan, wps - UART: There's no UART header on the board 2019-10-31 13:13:43 +00:00			`ath79-generic`
			`--------------`

ath79-generic: add support for devolo WiFi pro 1200i (#1871) 2019-11-20 12:39:22 +00:00			`* devolo`

docs: clarify WAN port on LAN-only devices At the December 2019 review day, the behavior for LAN only devices was defined. Such devices will use each LAN port as WAN. 2019-12-03 18:19:39 +00:00			`- WiFi pro 1200e [#lan_as_wan]_`
ath79-generic: add support for devolo WiFi pro 1200i (#1871) 2019-11-20 12:39:22 +00:00			`- WiFi pro 1200i`
ath79-generic: add support for devolo WiFi pro 1750c (#1875) 2019-11-22 00:45:00 +00:00			`- WiFi pro 1750c`
docs: clarify WAN port on LAN-only devices At the December 2019 review day, the behavior for LAN only devices was defined. Such devices will use each LAN port as WAN. 2019-12-03 18:19:39 +00:00			`- WiFi pro 1750e [#lan_as_wan]_`
ath79-generic: add support for devolo WiFi pro 1750i 2019-11-20 13:20:27 +00:00			`- WiFi pro 1750i`
ath79-generic: add support for devolo WiFi pro 1750x 2019-11-21 09:30:56 +00:00			`- WiFi pro 1750x`
ath79-generic: add support for devolo WiFi pro 1200i (#1871) 2019-11-20 12:39:22 +00:00
ath79-generic: add support for GL.iNet GL-AR300M-Lite 2020-01-28 23:47:43 +00:00			`* GL.iNet`

			`- GL-AR300M-Lite`

			`* OCEDO`
ath79-generic: add support for OCEDO Raccoon (#1869) 2019-11-20 12:46:18 +00:00
			`- Raccoon`

ath79-generic: add support for TP-Link Archer C6v2 Hardware specification: - SOC: Qualcomm QCA9563 @ 775MHz - Flash: GigaDevice GD25Q64CSIG (8MiB) - RAM: Zentel A3R1GE40JBF (128 MiB DDR2) - Ethernet: Qualcomm QCA8337N: 4x 1Gbps LAN + 1x 1Gbps WAN - Wireless: - 2.4GHz (bgn) QCA9563 integrated (3x3) - 5GHz (ac) Qualcomm QCA9886 (2x2) - Button: 1x power, 1x reset, 1x wps - LED: 6x LEDs: power, wlan2g, wlan5g, lan, wan, wps - UART: There's no UART header on the board 2019-10-31 13:13:43 +00:00			`* TP-Link`

			`- Archer C6 (v2)`

docs: move supported devices to own page (#1797) 2019-08-21 21:46:08 +00:00			`brcm2708-bcm2708`
			`----------------`

			`* RaspberryPi 1`

			`brcm2708-bcm2709`
			`----------------`

			`* RaspberryPi 2`


docs: update for reflect dropped IBSS support 2019-11-05 19:50:37 +00:00			`ipq40xx-generic`
			`---------------`
docs: move supported devices to own page (#1797) 2019-08-21 21:46:08 +00:00
			`* AVM`

			`- FRITZ!Box 4040 [#avmflash]_`
ipq40xx: add support for AVM FritzRepeater 1200 2019-11-10 19:39:19 +00:00			`- FRITZ!Repeater 1200 [#eva_ramboot]_`
docs: move supported devices to own page (#1797) 2019-08-21 21:46:08 +00:00
ipq40xx-generic: add support for EnGenius ENS620EXT 2020-03-06 08:32:03 +00:00			`* EnGenius`

			`- ENS620EXT`

docs: move supported devices to own page (#1797) 2019-08-21 21:46:08 +00:00			`* GL.iNet`

			`- GL-B1300`

			`* NETGEAR`

docs: supported devices: clarify version numbers of Netgear EX61x0 2020-01-28 00:04:18 +00:00			`- EX6100 (v2)`
			`- EX6150 (v2)`
docs: move supported devices to own page (#1797) 2019-08-21 21:46:08 +00:00
			`* OpenMesh`

			`- A42`
			`- A62`

			`* ZyXEL`

			`- NBG6617`
			`- WRE6606`

docs: update for reflect dropped IBSS support 2019-11-05 19:50:37 +00:00			`ipq806x-generic`
			`---------------`
ipq806x-generic: remove BROKEN flag for target and NETGEAR R7800 This commit removes the broken flag for the ipq806x-generic target, as the first device (NETGEAR R7800) now has full support in Gluon 2019-11-05 08:01:35 +00:00
			`* NETGEAR`

			`- R7800`

lantiq-xrx200: add support for AVM FRITZ!Box 7412 (#1859) 2019-11-18 21:54:50 +00:00			`lantiq-xrx200`
			`-------------`

			`* AVM`

lantiq-xrx200: add support for AVM FRITZ!Box 7360 (v1, v2) and 7360 SL 2019-12-09 15:14:53 +00:00			`- FRITZ!Box 7360 (v1, v2) [#avmflash]_ [#lan_as_wan]_`
			`- FRITZ!Box 7360 SL [#avmflash]_ [#lan_as_wan]_`
lantiq-xrx200: add support for AVM FRITZ!Box 7362 SL Flash instructions in the OpenWRT Commit: https://git.openwrt.org/?p=openwrt/openwrt.git;a=commit;h=eae6cac6a30b95bef04d033ed8a303b7e35a078b 2019-11-18 22:28:21 +00:00			`- FRITZ!Box 7362 SL [#eva_ramboot]_ [#lan_as_wan]_`
lantiq-xrx200: add support for AVM FRITZ!Box 7412 (#1859) 2019-11-18 21:54:50 +00:00			`- FRITZ!Box 7412 [#eva_ramboot]_`

lantiq-xway: add support for AVM FRITZ!Box 7312 2019-11-06 17:00:33 +00:00			`lantiq-xway`
			`-----------`

			`* AVM`

			`- FRITZ!Box 7312 [#avmflash]_`
lantiq-xway: add support for AVM FRITZ!Box 7320, 7330 and 7330 SL 2019-11-11 10:07:28 +00:00			`- FRITZ!Box 7320 [#avmflash]_ [#lan_as_wan]_`
			`- FRITZ!Box 7330 [#avmflash]_ [#lan_as_wan]_`
			`- FRITZ!Box 7330 SL [#avmflash]_ [#lan_as_wan]_`
lantiq-xway: add support for AVM FRITZ!Box 7312 2019-11-06 17:00:33 +00:00
docs: move supported devices to own page (#1797) 2019-08-21 21:46:08 +00:00			`mpc85xx-generic`
			`---------------`

			`* TP-Link`

			`- TL-WDR4900 (v1)`

			`mpc85xx-p1020`
			`---------------`

			`* Aerohive`

			`- HiveAP 330`

mpc85xx-p1020: add support for Enterasys WS-AP3710i 2019-12-18 22:56:34 +00:00			`* Enterasys`

			`- WS-AP3710i`

mpc85xx-p1020: add support for OCEDO Panda (#1847) 2019-11-03 17:59:00 +00:00			`* OCEDO`

			`- Panda`

docs: update for reflect dropped IBSS support 2019-11-05 19:50:37 +00:00			`ramips-mt7620`
			`-------------`
docs: move supported devices to own page (#1797) 2019-08-21 21:46:08 +00:00
docs: rename vendor to GL.iNet for uniformity 2020-01-31 18:42:12 +00:00			`* GL.iNet`
docs: move supported devices to own page (#1797) 2019-08-21 21:46:08 +00:00
			`- GL-MT300A`
			`- GL-MT300N`
			`- GL-MT750`

			`* Nexx`

			`- WT3020AD/F/H`

ramips-mt76x8: add support for TP-Link TL-WA801ND v5 2020-01-14 14:52:03 +00:00			`* TP-Link`
ramips-mt7620: add support for TP-Link Archer C2 v1 2020-01-05 23:02:44 +00:00
			`- Archer C2 v1`
ramips-mt7620: add support for tp-link archer c20 v1 (#1866) Specification: - MediaTek MT7620A (580 Mhz) - 64 MB of RAM - 8 MB of FLASH - 2T2R 2.4 GHz and 1T1R 5 GHz - 5x 10/100 Mbps Ethernet - 2x external, non-detachable antennas - UART (J1) header on PCB (115200 8n1) - 8x LED (GPIO-controlled*), 2x button, power input switch - 1 x USB 2.0 port 2020-01-20 22:26:04 +00:00			`- Archer C20 (v1)`
ramips-mt7620: add support for TP-Link Archer C20i 2020-01-07 23:31:19 +00:00			`- Archer C20i`
ramips-mt7620: add support for TP-Link Archer C50 v1 2019-11-07 08:58:28 +00:00			`- Archer C50 v1`
ramips-mt7620: add support for TP-Link Archer C2 v1 2020-01-05 23:02:44 +00:00
docs: supported_devices: fix small typo Just saw a small typo i made in the Xiaomi Mi Wifi Mini PR. This PR Corrects this. 2020-01-06 23:03:08 +00:00			`* Xiaomi`
ramips-mt7620: remove broken flag for Xiaomi MiWifi Mini WiFi driver is stable now. 2020-01-04 21:39:00 +00:00
			`- MiWiFi Mini`

docs: move supported devices to own page (#1797) 2019-08-21 21:46:08 +00:00			`ramips-mt7621`
			`-------------`

			`* ASUS`

docs: update for reflect dropped IBSS support 2019-11-05 19:50:37 +00:00			`- RT-AC57U`
docs: move supported devices to own page (#1797) 2019-08-21 21:46:08 +00:00
			`* D-Link`

docs: update for reflect dropped IBSS support 2019-11-05 19:50:37 +00:00			`- DIR-860L (B1)`
docs: move supported devices to own page (#1797) 2019-08-21 21:46:08 +00:00
ramips-mt7621: add support for Netgear R6220 2019-11-07 00:40:52 +00:00			`* NETGEAR`

docs: supported devices: clarify version numbers of Netgear EX61x0 2020-01-28 00:04:18 +00:00			`- EX6150 (v1)`
ramips-mt7621: add support for Netgear R6220 2019-11-07 00:40:52 +00:00			`- R6220`

docs: move supported devices to own page (#1797) 2019-08-21 21:46:08 +00:00			`* Ubiquiti`

			`- EdgeRouter X`
			`- EdgeRouter X-SFP`

			`* ZBT`

docs: update for reflect dropped IBSS support 2019-11-05 19:50:37 +00:00			`- WG3526-16M`
			`- WG3526-32M`
docs: move supported devices to own page (#1797) 2019-08-21 21:46:08 +00:00
docs: update for reflect dropped IBSS support 2019-11-05 19:50:37 +00:00			`ramips-mt76x8`
			`-------------`
docs: move supported devices to own page (#1797) 2019-08-21 21:46:08 +00:00
			`* GL.iNet`

			`- GL-MT300N v2`
ramips-mt76x8: add support for GL.iNet VIXMINI 2019-10-30 13:37:04 +00:00			`- VIXMINI`
docs: move supported devices to own page (#1797) 2019-08-21 21:46:08 +00:00
			`* NETGEAR`

			`- R6120`

			`* TP-Link`

docs supported-devices: fix alphabetical order 2020-01-31 21:53:59 +00:00			`- Archer C50 v3`
			`- Archer C50 v4`
ramips-mt76x8: add support for TP-Link TL-MR3020 v3 2020-01-31 18:05:04 +00:00			`- TL-MR3020 v3`
docs: move supported devices to own page (#1797) 2019-08-21 21:46:08 +00:00			`- TL-MR3420 v5`
ramips-mt76x8: add support for TP-Link TL-WA801ND v5 2020-01-14 14:52:03 +00:00			`- TL-WA801ND v5`
docs: move supported devices to own page (#1797) 2019-08-21 21:46:08 +00:00			`- TL-WR841N v13`
ramips-mt76x8: add support for TP-Link TL-WR902AC v3 TP-Link TL-WR902AC v3 is a pocket-size dual-band (AC750) router based on MediaTek MT7628N + MT7650E. Specification: - MediaTek MT7628N/N (580 Mhz) - 64 MB of RAM - 8 MB of FLASH - 2T2R 2.4 GHz and 1T1R 5 GHz - 1x 10/100 Mbps Ethernet 2019-03-17 13:49:57 +00:00			`- TL-WR902AC v3`
docs: move supported devices to own page (#1797) 2019-08-21 21:46:08 +00:00
			`* VoCore`

			`- VoCore2`

docs: update for reflect dropped IBSS support 2019-11-05 19:50:37 +00:00			`ramips-rt305x [#deprecated]_`
			`----------------------------`
docs: move supported devices to own page (#1797) 2019-08-21 21:46:08 +00:00
			`* A5-V11`

			`* D-Link`

			`- DIR-615 (D1, D2, D3, D4, H1)`

			`* VoCore`

			`- VoCore (8M, 16M)`

			`sunxi-cortexa7`
			`--------------`

			`* LeMaker`

			`- Banana Pi M1`

			`x86-generic`
			`-----------`

			`* x86-generic`
			`* x86-virtualbox`
			`* x86-vmware`

			See also: :doc:`x86`

			`x86-geode`
			`---------`

			`* x86-geode`

			See also: :doc:`x86`

			`x86-64`
			`------`

			`* x86-64-generic`
			`* x86-64-virtualbox`
			`* x86-64-vmware`

			See also: :doc:`x86`

			`Footnotes`
			`---------`

docs: mark ar71xx-tiny and ramips-rt305x as deprecated 2019-09-19 13:31:23 +00:00			`.. [#deprecated]`
			`The device or target is reaching its end of life soon. This means that support`
			`in the next major release of Gluon is doubtful.`

docs: move supported devices to own page (#1797) 2019-08-21 21:46:08 +00:00			`.. [#avmflash]`
			`For instructions on how to flash AVM devices, visit https://fritzfla.sh`
ipq40xx: add support for AVM FritzRepeater 1200 2019-11-10 19:39:19 +00:00
			`.. [#eva_ramboot]`
			`For instructions on how to flash AVM NAND devices, see the respective`
ath79-generic: add support for devolo WiFi pro 1200i (#1871) 2019-11-20 12:39:22 +00:00			`commit which added support in OpenWrt.`
docs: clarify WAN port on LAN-only devices At the December 2019 review day, the behavior for LAN only devices was defined. Such devices will use each LAN port as WAN. 2019-12-03 18:19:39 +00:00
			`.. [#lan_as_wan]`
			`All LAN ports on this device are used as WAN.`