gluon/targets/ramips-mt7621

84 lines
1.3 KiB
Plaintext
Raw Normal View History

-- ASUS
device('asus-rt-ac57u', 'asus_rt-ac57u', {
factory = false,
})
-- D-Link
2017-01-18 16:21:43 +00:00
2020-04-06 10:26:58 +00:00
device('d-link-dir-860l-b1', 'dlink_dir-860l-b1')
-- Netgear
device('netgear-ex6150', 'netgear_ex6150', {
factory_ext = '.chk',
})
2020-04-06 10:26:58 +00:00
device('netgear-r6220', 'netgear_r6220', {
factory_ext = '.img',
})
2020-04-06 10:26:58 +00:00
device('netgear-wndr3700-v5', 'netgear_wndr3700-v5', {
factory = false,
broken = true, -- untested
2020-04-06 10:26:58 +00:00
manifest_aliases = {
'netgear-wndr3700v5',
},
})
ramips-mt7621: add support for Ubiquiti UniFi 6 Lite (#2310) Hardware -------- MediaTek MT7621AT 256M DDR3 32M SPI-NOR MediaTek MT7603 2T2R 802.11n 2.4GHz MediaTek MT7915 2T2R 802.11ax 5GHz Not Working ----------- - Bluetooth (connected to UART3) UART ---- UART is located in the lower left corner of the board. Pinout is 0 - 3V3 (don't connect) 1 - RX 2 - TX 3 - GND Console is 115200 8N1. Boot ---- 1. Connect to the serial console and connect power. 2. Double-press ESC when prompted 3. Set the fdt address $ fdt addr $(fdtcontroladdr) 4. Remove the signature node from the control FDT $ fdt rm /signature 5. Transfer and boot the OpenWrt initramfs image to the device. Make sure to name the file C0A80114.img and have it reachable at 192.168.1.1/24 $ tftpboot; bootm Installation ------------ 1. Connect to the booted device at 192.168.1.20 using username/password "ubnt". 2. Update the bootloader environment. $ fw_setenv devmode TRUE $ fw_setenv boot_openwrt "fdt addr \$(fdtcontroladdr); fdt rm /signature; bootubnt" $ fw_setenv bootcmd "run boot_openwrt" 3. Transfer the OpenWrt sysupgrade image to the device using SCP. 4. Check the mtd partition number for bs / kernel0 / kernel1 $ cat /proc/mtd 5. Set the bootselect flag to boot from kernel0 $ dd if=/dev/zero bs=1 count=1 of=/dev/mtdblock4 6. Write the OpenWrt sysupgrade image to both kernel0 as well as kernel1 $ dd if=openwrt.bin of=/dev/mtdblock6 $ dd if=openwrt.bin of=/dev/mtdblock7 7. Reboot the device. It should boot into OpenWrt.
2021-09-14 22:44:34 +00:00
-- Ubiquiti
device('ubiquiti-unifi-6-lite', 'ubnt_unifi-6-lite', {
factory = false,
})
-- Xiaomi
device('xiaomi-mi-router-4a-gigabit-edition', 'xiaomi_mi-router-4a-gigabit', {
factory = false,
})
-- ZBT
2020-04-06 10:26:58 +00:00
device('zbtlink-zbt-wg3526-16m', 'zbtlink_zbt-wg3526-16m', {
factory = false,
manifest_aliases = {
'zbt-wg3526',
2020-04-06 10:26:58 +00:00
'zbt-wg3526-16m',
},
})
2020-04-06 10:26:58 +00:00
device('zbtlink-zbt-wg3526-32m', 'zbtlink_zbt-wg3526-32m', {
factory = false,
2020-04-06 10:26:58 +00:00
manifest_aliases = {
'zbt-wg3526-32m',
},
})
-- Devices without WLAN
-- Ubiquiti
2020-04-06 10:26:58 +00:00
device('ubiquiti-edgerouter-x', 'ubnt_edgerouter-x', {
factory = false,
packages = {'-hostapd-mini'},
2020-04-06 10:26:58 +00:00
manifest_aliases = {
'ubnt-erx',
},
})
2020-04-06 10:26:58 +00:00
device('ubiquiti-edgerouter-x-sfp', 'ubnt_edgerouter-x-sfp', {
factory = false,
packages = {'-hostapd-mini'},
2020-04-06 10:26:58 +00:00
manifest_aliases = {
'ubnt-erx-sfp',
},
})