152 lines
5.3 KiB
Diff
152 lines
5.3 KiB
Diff
|
From: Sven Eckelmann <sven@narfation.org>
|
||
|
|
Date: Mon, 23 Nov 2020 13:41:34 +0100
|
||
|
|
Subject: ath79: Add support for OpenMesh A40
|
||
|
|
|
||
|
|
Device specifications:
|
||
|
|
======================
|
||
|
|
|
||
|
|
* Qualcomm/Atheros QCA9558 ver 1 rev 0
|
||
|
|
* 720/600/240 MHz (CPU/DDR/AHB)
|
||
|
|
* 128 MB of RAM
|
||
|
|
* 16 MB of SPI NOR flash
|
||
|
|
- 2x 7 MB available; but one of the 7 MB regions is the recovery image
|
||
|
|
* 2T2R 2.4 GHz Wi-Fi (11n)
|
||
|
|
* 2T2R 5 GHz Wi-Fi (11ac)
|
||
|
|
* multi-color LED (controlled via red/green/blue GPIOs)
|
||
|
|
* 1x GPIO-button (reset)
|
||
|
|
* external h/w watchdog (enabled by default))
|
||
|
|
* TTL pins are on board (arrow points to VCC, then follows: GND, TX, RX)
|
||
|
|
* 2x ethernet
|
||
|
|
- eth0
|
||
|
|
+ Label: Ethernet 1
|
||
|
|
+ AR8035 ethernet PHY (RGMII)
|
||
|
|
+ 10/100/1000 Mbps Ethernet
|
||
|
|
+ 802.3af POE
|
||
|
|
+ used as WAN interface
|
||
|
|
- eth1
|
||
|
|
+ Label: Ethernet 2
|
||
|
|
+ AR8035 ethernet PHY (SGMII)
|
||
|
|
+ 10/100/1000 Mbps Ethernet
|
||
|
|
+ used as LAN interface
|
||
|
|
* 1x USB
|
||
|
|
* internal antennas
|
||
|
|
|
||
|
|
Flashing instructions:
|
||
|
|
======================
|
||
|
|
|
||
|
|
Various methods can be used to install the actual image on the flash.
|
||
|
|
Two easy ones are:
|
||
|
|
|
||
|
|
ap51-flash
|
||
|
|
----------
|
||
|
|
|
||
|
|
The tool ap51-flash (https://github.com/ap51-flash/ap51-flash) should be
|
||
|
|
used to transfer the image to the u-boot when the device boots up.
|
||
|
|
|
||
|
|
initramfs from TFTP
|
||
|
|
-------------------
|
||
|
|
|
||
|
|
The serial console must be used to access the u-boot shell during bootup.
|
||
|
|
It can then be used to first boot up the initramfs image from a TFTP server
|
||
|
|
(here with the IP 192.168.1.21):
|
||
|
|
|
||
|
|
setenv serverip 192.168.1.21
|
||
|
|
setenv ipaddr 192.168.1.1
|
||
|
|
tftpboot 0c00000 <filename-of-initramfs-kernel>.bin && bootm $fileaddr
|
||
|
|
|
||
|
|
The actual sysupgrade image can then be transferred (on the LAN port) to the
|
||
|
|
device via
|
||
|
|
|
||
|
|
scp <filename-of-squashfs-sysupgrade>.bin root@192.168.1.1:/tmp/
|
||
|
|
|
||
|
|
On the device, the sysupgrade must then be started using
|
||
|
|
|
||
|
|
sysupgrade -n /tmp/<filename-of-squashfs-sysupgrade>.bin
|
||
|
|
|
||
|
|
Signed-off-by: Sven Eckelmann <sven@narfation.org>
|
||
|
|
(cherry picked from commit 9a172797e593c061f6759a37eaeba2956ad8d72f)
|
||
|
|
|
||
|
|
diff --git a/package/boot/uboot-envtools/files/ath79 b/package/boot/uboot-envtools/files/ath79
|
||
|
|
index 0791d58b04cd108fcd2190bcf3c39f715f0b511f..a37057953bc1e9b7fdf2be02136142d0fc145054 100644
|
||
|
|
--- a/package/boot/uboot-envtools/files/ath79
|
||
|
|
+++ b/package/boot/uboot-envtools/files/ath79
|
||
|
|
@@ -49,6 +49,7 @@ netgear,wnr2200-16m|\
|
||
|
|
netgear,wnr612-v2|\
|
||
|
|
ocedo,koala|\
|
||
|
|
ocedo,raccoon|\
|
||
|
|
+openmesh,a40|\
|
||
|
|
openmesh,a60|\
|
||
|
|
openmesh,mr600-v1|\
|
||
|
|
openmesh,mr600-v2|\
|
||
|
|
diff --git a/target/linux/ath79/dts/qca9558_openmesh_a40.dts b/target/linux/ath79/dts/qca9558_openmesh_a40.dts
|
||
|
|
new file mode 100644
|
||
|
|
index 0000000000000000000000000000000000000000..d2b817031a9db6846de0632a64962a0197fa2c6f
|
||
|
|
--- /dev/null
|
||
|
|
+++ b/target/linux/ath79/dts/qca9558_openmesh_a40.dts
|
||
|
|
@@ -0,0 +1,8 @@
|
||
|
|
+// SPDX-License-Identifier: GPL-2.0-or-later OR MIT
|
||
|
|
+
|
||
|
|
+#include "qca9558_openmesh_a60.dtsi"
|
||
|
|
+
|
||
|
|
+/ {
|
||
|
|
+ compatible = "openmesh,a40", "qca,qca9558";
|
||
|
|
+ model = "OpenMesh A40";
|
||
|
|
+};
|
||
|
|
diff --git a/target/linux/ath79/generic/base-files/etc/board.d/02_network b/target/linux/ath79/generic/base-files/etc/board.d/02_network
|
||
|
|
index 4b83ac7d32fc372cd3b493e8ec427c04e0f2e0d1..c2932c1737d97f3eb732620041664f5060d16946 100755
|
||
|
|
--- a/target/linux/ath79/generic/base-files/etc/board.d/02_network
|
||
|
|
+++ b/target/linux/ath79/generic/base-files/etc/board.d/02_network
|
||
|
|
@@ -172,6 +172,7 @@ ath79_setup_interfaces()
|
||
|
|
comfast,cf-e120a-v3|\
|
||
|
|
comfast,cf-e314n-v2|\
|
||
|
|
compex,wpj531-16m|\
|
||
|
|
+ openmesh,a40|\
|
||
|
|
openmesh,a60|\
|
||
|
|
openmesh,om2p-v4|\
|
||
|
|
openmesh,om2p-hs-v4|\
|
||
|
|
diff --git a/target/linux/ath79/generic/base-files/etc/hotplug.d/firmware/11-ath10k-caldata b/target/linux/ath79/generic/base-files/etc/hotplug.d/firmware/11-ath10k-caldata
|
||
|
|
index b4c8a78a7fe4ba5bd3ca1f9c6e2b5e51e7fd1882..b70a87054b10fbe708d9aa8603ecdb591fc92591 100644
|
||
|
|
--- a/target/linux/ath79/generic/base-files/etc/hotplug.d/firmware/11-ath10k-caldata
|
||
|
|
+++ b/target/linux/ath79/generic/base-files/etc/hotplug.d/firmware/11-ath10k-caldata
|
||
|
|
@@ -99,6 +99,7 @@ case "$FIRMWARE" in
|
||
|
|
caldata_extract "art" 0x5000 0x844
|
||
|
|
ath10k_patch_mac $(mtd_get_mac_binary art 0xc)
|
||
|
|
;;
|
||
|
|
+ openmesh,a40|\
|
||
|
|
openmesh,a60|\
|
||
|
|
openmesh,mr1750-v1|\
|
||
|
|
openmesh,mr1750-v2|\
|
||
|
|
diff --git a/target/linux/ath79/generic/base-files/lib/upgrade/platform.sh b/target/linux/ath79/generic/base-files/lib/upgrade/platform.sh
|
||
|
|
index f7862bb032fbce56be77e9db8ae2e37bf5da30ea..e979c11bb91cb20fd4168b8921499f03572d3512 100644
|
||
|
|
--- a/target/linux/ath79/generic/base-files/lib/upgrade/platform.sh
|
||
|
|
+++ b/target/linux/ath79/generic/base-files/lib/upgrade/platform.sh
|
||
|
|
@@ -65,6 +65,7 @@ platform_do_upgrade() {
|
||
|
|
jjplus,ja76pf2)
|
||
|
|
redboot_fis_do_upgrade "$1" linux
|
||
|
|
;;
|
||
|
|
+ openmesh,a40|\
|
||
|
|
openmesh,a60|\
|
||
|
|
openmesh,mr600-v1|\
|
||
|
|
openmesh,mr600-v2|\
|
||
|
|
diff --git a/target/linux/ath79/image/generic.mk b/target/linux/ath79/image/generic.mk
|
||
|
|
index c669eb2cdb3f868c320412801723ceb112b4089f..c63900dc701bbc21dce12086f7045d7d450fc5f3 100644
|
||
|
|
--- a/target/linux/ath79/image/generic.mk
|
||
|
|
+++ b/target/linux/ath79/image/generic.mk
|
||
|
|
@@ -1640,6 +1640,16 @@ define Device/openmesh_common_256k
|
||
|
|
openmesh-image ce_type=$$$$(OPENMESH_CE_TYPE) | append-metadata
|
||
|
|
endef
|
||
|
|
|
||
|
|
+define Device/openmesh_a40
|
||
|
|
+ $(Device/openmesh_common_64k)
|
||
|
|
+ SOC := qca9558
|
||
|
|
+ DEVICE_MODEL := A40
|
||
|
|
+ DEVICE_PACKAGES += kmod-ath10k-ct ath10k-firmware-qca988x-ct kmod-usb2
|
||
|
|
+ OPENMESH_CE_TYPE := A60
|
||
|
|
+ SUPPORTED_DEVICES += a40
|
||
|
|
+endef
|
||
|
|
+TARGET_DEVICES += openmesh_a40
|
||
|
|
+
|
||
|
|
define Device/openmesh_a60
|
||
|
|
$(Device/openmesh_common_64k)
|
||
|
|
SOC := qca9558
|