gluon/docs/user/supported_devices.rst

347 lines
4.2 KiB
ReStructuredText
Raw Normal View History

Supported Devices & Architectures
=================================
ath79-generic
--------------
* devolo
- WiFi pro 1200e [#lan_as_wan]_
- WiFi pro 1200i
- WiFi pro 1750c
- WiFi pro 1750e [#lan_as_wan]_
- WiFi pro 1750i
- WiFi pro 1750x
* Enterasys
- WS-AP3705i
* GL.iNet
- GL-AR300M-Lite
* Joy-IT
- JT-OR750i
* OCEDO
- Raccoon
* Onion
- Omega [#modular_ethernet]_
* Plasma Cloud
- PA300
- PA300E
* Siemens
- WS-AP3610
* TP-Link
- Archer A7 (v5)
- Archer C6 (v2)
- CPE220 (v3.0)
- CPE510 (v2.0)
- CPE510 (v3.0)
- EAP225-Outdoor (v1)
- TL-WDR3600 (v1)
- TL-WDR4300 (v1)
- WBS210 (v2.0)
ath79-nand
----------
* GL.iNet
- GL-AR750S
brcm2708-bcm2708
----------------
* RaspberryPi 1
brcm2708-bcm2709
----------------
* RaspberryPi 2
ipq40xx-generic
---------------
* Aruba
- AP-303
ipq40xx: add support for Aruba AP-303H / Instant ON AP11D (#2302) - [x] must be flashable from vendor firmware - [ ] webinterface - [ ] tftp - [x] other: Console port available. Manufacturer specific cable required. Tutorial in OpenWRT commit message https://git.openwrt.org/?p=openwrt/openwrt.git;a=commit;h=c6e972c8772a628a1a2f2e5590d7c6f4acef9ab0 - [x] must support upgrade mechanism - [x] must have working sysupgrade - [x] must keep/forget configuration (if applicable) *think `sysupgrade [-n]` or `firstboot`* - [x] must have working autoupdate root@Aruba-AP-303H:~# lua -e 'print(require("platform_info").get_image_name())' aruba-ap-303h - [x] reset/wps/phone button must return device into config mode - [x] primary mac should match address on device label (or packaging) (https://gluon.readthedocs.io/en/latest/dev/hardware.html#notes) - wired network - [x] should support all network ports on the device - [x] must have correct port assignment (WAN/LAN) - wifi (if applicable) - [x] association with AP must be possible on all radios - [x] association with 802.11s mesh must be working on all radios - [x] ap/mesh mode must work in parallel on all radios - led mapping - power/sys led (_critical, because led definitions are setup on firstboot only_) - [x] lit while the device is on - [x] should display config mode blink sequence (https://gluon.readthedocs.io/en/latest/features/configmode.html) - radio leds - [x] should map to their respective radio - [x] should show activity - switchport leds - [x] should map to their respective port (or switch, if only one led present) - [x] should show link state and activity - outdoor devices only - [ ] added board name to `is_outdoor_device` function in `package/gluon-core/luasrc/usr/lib/lua/gluon/platform.lua` - ToDo (upstream): - enable PoE pass through on interface E3 system.poe_passthrough=gpio_switch system.poe_passthrough.name='PoE Passthrough' system.poe_passthrough.gpio_pin='446' system.poe_passthrough.value='0' (0 is active)
2021-09-01 21:31:01 +00:00
- AP-303H
- AP-365
- Instant On AP11
ipq40xx: add support for Aruba AP-303H / Instant ON AP11D (#2302) - [x] must be flashable from vendor firmware - [ ] webinterface - [ ] tftp - [x] other: Console port available. Manufacturer specific cable required. Tutorial in OpenWRT commit message https://git.openwrt.org/?p=openwrt/openwrt.git;a=commit;h=c6e972c8772a628a1a2f2e5590d7c6f4acef9ab0 - [x] must support upgrade mechanism - [x] must have working sysupgrade - [x] must keep/forget configuration (if applicable) *think `sysupgrade [-n]` or `firstboot`* - [x] must have working autoupdate root@Aruba-AP-303H:~# lua -e 'print(require("platform_info").get_image_name())' aruba-ap-303h - [x] reset/wps/phone button must return device into config mode - [x] primary mac should match address on device label (or packaging) (https://gluon.readthedocs.io/en/latest/dev/hardware.html#notes) - wired network - [x] should support all network ports on the device - [x] must have correct port assignment (WAN/LAN) - wifi (if applicable) - [x] association with AP must be possible on all radios - [x] association with 802.11s mesh must be working on all radios - [x] ap/mesh mode must work in parallel on all radios - led mapping - power/sys led (_critical, because led definitions are setup on firstboot only_) - [x] lit while the device is on - [x] should display config mode blink sequence (https://gluon.readthedocs.io/en/latest/features/configmode.html) - radio leds - [x] should map to their respective radio - [x] should show activity - switchport leds - [x] should map to their respective port (or switch, if only one led present) - [x] should show link state and activity - outdoor devices only - [ ] added board name to `is_outdoor_device` function in `package/gluon-core/luasrc/usr/lib/lua/gluon/platform.lua` - ToDo (upstream): - enable PoE pass through on interface E3 system.poe_passthrough=gpio_switch system.poe_passthrough.name='PoE Passthrough' system.poe_passthrough.gpio_pin='446' system.poe_passthrough.value='0' (0 is active)
2021-09-01 21:31:01 +00:00
- Instant On AP11D
- Instant On AP17
* AVM
- FRITZ!Box 4040 [#avmflash]_
- FRITZ!Box 7530 [#eva_ramboot]_
- FRITZ!Repeater 1200 [#eva_ramboot]_
* EnGenius
- ENS620EXT
* GL.iNet
- GL-B1300
* Linksys
- EA6350 (v3)
* NETGEAR
- EX6100 (v2)
- EX6150 (v2)
* OpenMesh
- A42
- A62
* Plasma Cloud
- PA1200
- PA2200
* ZyXEL
- NBG6617
2019-12-14 18:06:21 +00:00
- WRE6606 [#device-class-tiny]_
ipq806x-generic
---------------
* NETGEAR
- R7800
lantiq-xrx200
-------------
* AVM
- FRITZ!Box 7360 (v1, v2) [#avmflash]_ [#lan_as_wan]_
- FRITZ!Box 7360 SL [#avmflash]_ [#lan_as_wan]_
- FRITZ!Box 7362 SL [#eva_ramboot]_ [#lan_as_wan]_
- FRITZ!Box 7412 [#eva_ramboot]_
lantiq-xway
-----------
* AVM
- FRITZ!Box 7312 [#avmflash]_
* NETGEAR
- DGN3500B [#lan_as_wan]_
mediatek-mt7622
---------------
* Ubiquiti
- UniFi 6 LR
mpc85xx-generic
---------------
* TP-Link
- TL-WDR4900 (v1)
mpc85xx-p1020
---------------
* Aerohive
- HiveAP 330
* Enterasys
- WS-AP3710i
* OCEDO
- Panda
ramips-mt7620
-------------
* GL.iNet
- GL-MT300A
- GL-MT300N
- GL-MT750
* NETGEAR
- EX3700
- EX3800
* Nexx
- WT3020AD/F/H
* TP-Link
- Archer C2 (v1)
- Archer C20 (v1)
- Archer C20i
- Archer C50 (v1)
* Xiaomi
- MiWiFi Mini
ramips-mt7621
-------------
* ASUS
- RT-AC57U
* D-Link
- DIR-860L (B1)
* NETGEAR
- EX6150 (v1)
- R6220
* Ubiquiti
- EdgeRouter X
- EdgeRouter X-SFP
ramips-mt7621: add support for Ubiquiti UniFi 6 Lite (#2310) Hardware -------- MediaTek MT7621AT 256M DDR3 32M SPI-NOR MediaTek MT7603 2T2R 802.11n 2.4GHz MediaTek MT7915 2T2R 802.11ax 5GHz Not Working ----------- - Bluetooth (connected to UART3) UART ---- UART is located in the lower left corner of the board. Pinout is 0 - 3V3 (don't connect) 1 - RX 2 - TX 3 - GND Console is 115200 8N1. Boot ---- 1. Connect to the serial console and connect power. 2. Double-press ESC when prompted 3. Set the fdt address $ fdt addr $(fdtcontroladdr) 4. Remove the signature node from the control FDT $ fdt rm /signature 5. Transfer and boot the OpenWrt initramfs image to the device. Make sure to name the file C0A80114.img and have it reachable at 192.168.1.1/24 $ tftpboot; bootm Installation ------------ 1. Connect to the booted device at 192.168.1.20 using username/password "ubnt". 2. Update the bootloader environment. $ fw_setenv devmode TRUE $ fw_setenv boot_openwrt "fdt addr \$(fdtcontroladdr); fdt rm /signature; bootubnt" $ fw_setenv bootcmd "run boot_openwrt" 3. Transfer the OpenWrt sysupgrade image to the device using SCP. 4. Check the mtd partition number for bs / kernel0 / kernel1 $ cat /proc/mtd 5. Set the bootselect flag to boot from kernel0 $ dd if=/dev/zero bs=1 count=1 of=/dev/mtdblock4 6. Write the OpenWrt sysupgrade image to both kernel0 as well as kernel1 $ dd if=openwrt.bin of=/dev/mtdblock6 $ dd if=openwrt.bin of=/dev/mtdblock7 7. Reboot the device. It should boot into OpenWrt.
2021-09-14 22:44:34 +00:00
- UniFi 6 Lite
* ZBT
- WG3526-16M
- WG3526-32M
* Xiaomi
- Xiaomi Mi Router 4A (Gigabit Edition)
ramips-mt76x8
-------------
* Cudy
- WR1000 (v1)
* GL.iNet
- GL-MT300N (v2)
- microuter-N300
- VIXMINI
* NETGEAR
- R6120
* RAVPower
- RP-WD009
* TP-Link
- Archer C50 (v3)
- Archer C50 (v4)
- RE200 (v2)
- TL-MR3020 (v3)
- TL-MR3420 (v5)
- TL-WA801ND (v5)
- TL-WR841N (v13)
- TL-WR902AC (v3)
* VoCore
- VoCore2
* Xiaomi
- Xiaomi Mi Router 4A (100M Edition)
- Xiaomi Mi Router 4C
rockchip-armv8
--------------
* FriendlyElec
- NanoPi R2S
sunxi-cortexa7
--------------
* LeMaker
- Banana Pi M1
x86-generic
-----------
* x86-generic
* x86-virtualbox
* x86-vmware
See also: :doc:`x86`
x86-geode
---------
* x86-geode
See also: :doc:`x86`
x86-64
------
* x86-64-generic
* x86-64-virtualbox
* x86-64-vmware
See also: :doc:`x86`
Footnotes
---------
2019-12-14 18:06:21 +00:00
.. [#device-class-tiny]
These devices only support a subset of Gluons capabilities due to flash or memory
size constraints. Devices are classified as tiny in they provide less than 7M of usable
flash space or have a low amount of system memory. For more information, see the
developer documentation: :ref:`device-class-definition`.
.. [#avmflash]
2022-03-16 14:28:49 +00:00
For instructions on how to flash AVM devices, visit https://fritz-tools.readthedocs.io
.. [#eva_ramboot]
For instructions on how to flash AVM NAND devices, see the respective
commit which added support in OpenWrt.
.. [#lan_as_wan]
All LAN ports on this device are used as WAN.
.. [#modular_ethernet]
These devices follow a modular principle,
which means even basic functionality like ethernet is provided by an expansion-board,
that may not be bundled with the device itself.
Such expansions are recommended for the config mode, but are not strictly necessary,
as exposed serial ports may grant sufficient access as well.