gluon-luci-admin: fix firmware upgrade feature

package/gluon-luci-admin/files/usr/lib/lua/luci/controller/admin/system.lua

@@ -129,35 +129,13 @@ function action_upgrade()
 	local has_platform = nixio.fs.access("/lib/upgrade/platform.sh")
 	local has_upload   = luci.http.formvalue("image")
 	
-	-- This does the actual flashing which is invoked inside an iframe
-	-- so don't produce meaningful errors here because the the 
-	-- previous pages should arrange the stuff as required.
-	if step == 4 then
-		if has_platform and has_image and has_support then
-			-- Mimetype text/plain
-			luci.http.prepare_content("text/plain")
-			luci.http.write("Starting luci-flash...\n")
-
-			-- Now invoke sysupgrade
-			local keepcfg = keep_avail and luci.http.formvalue("keepcfg") == "1"
-			local flash = ltn12_popen("/sbin/luci-flash %s %q" %{
-				keepcfg and "-k %q" % _keep_pattern() or "", tmpfile
-			})
-
-			luci.ltn12.pump.all(flash, luci.http.write)
-
-			-- Make sure the device is rebooted
-			luci.sys.reboot()
-		end
-
-
 	--
 	-- This is step 1-3, which does the user interaction and
 	-- image upload.
 	--
 
 	-- Step 1: file upload, error on unsupported image format
-	elseif not has_image or not has_support or step == 1 then
+	if not has_image or not has_support or step == 1 then
 		-- If there is an image but user has requested step 1
 		-- or type is not supported, then remove it.
 		if has_image then
@@ -183,10 +161,15 @@ function action_upgrade()
 	
 	-- Step 3: load iframe which calls the actual flash procedure
 	elseif step == 3 then
-		luci.template.render("admin/upgrade", {
+		-- invoke sysupgrade
-			step=3,
+		local keepcfg = keep_avail and luci.http.formvalue("keepcfg") == "1"
-			keepconfig=(keep_avail and luci.http.formvalue("keepcfg") == "1")
+		fork_exec("/sbin/sysupgrade %s %q" %
-		} )
+				{ keepcfg and "" or "-n"
+				, tmpfile
+				}
+			)
+
+		luci.template.render("admin/upgrade", { step=3 } )
 	end
 end
 
@@ -233,3 +216,27 @@ function ltn12_popen(command)
 		nixio.exec("/bin/sh", "-c", command)
 	end
 end
+
+function fork_exec(command)
+	local pid = nixio.fork()
+	if pid > 0 then
+		return
+	elseif pid == 0 then
+		-- change to root dir
+		nixio.chdir("/")
+
+		-- patch stdin, out, err to /dev/null
+		local null = nixio.open("/dev/null", "w+")
+		if null then
+			nixio.dup(null, nixio.stderr)
+			nixio.dup(null, nixio.stdout)
+			nixio.dup(null, nixio.stdin)
+			if null:fileno() > 2 then
+				null:close()
+			end
+		end
+
+		-- replace with target command
+		nixio.exec("/bin/sh", "-c", command)
+	end
+end

package/gluon-luci-admin/files/usr/lib/lua/luci/view/admin/upgrade.htm

@@ -67,8 +67,18 @@ $Id$
 		<ul>
 			<li>Checksum: <code><%=checksum%></code></li>
 			<li>Size: <%
-				local w = require "luci.tools.webadmin"
+				function byte_format(byte)
-				write(w.byte_format(filesize))
+					local suff = {"B", "KB", "MB", "GB", "TB"}
+					for i=1, 5 do
+						if byte > 1024 and i < 5 then
+							byte = byte / 1024
+						else
+							return string.format("%.2f %s", byte, suff[i])
+						end
+					end
+				end
+
+				write(byte_format(filesize))
 	
 				if flashsize > 0 then
 					write(luci.i18n.translatef(
@@ -97,8 +107,6 @@ $Id$
 		Wait a few minutes until you try to reconnect.
 		It might be necessary to renew the address of your computer to reach the device
 		again, depending on your settings.</p>
-		
-	<iframe src="<%=REQUEST_URI%>?step=4&#38;keepcfg=<%=keepconfig and "1" or "0"%>" style="border:1px solid black; width:100%; height:150px"></iframe>
 <% end %>
 <%+footer%>