ath79-generic: Add support for OpenMesh MR1750 v1
Device specifications: ====================== * Qualcomm/Atheros QCA9558 ver 1 rev 0 * 720/600/240 MHz (CPU/DDR/AHB) * 128 MB of RAM * 16 MB of SPI NOR flash - 2x 7 MB available; but one of the 7 MB regions is the recovery image * 3T3R 2.4 GHz Wi-Fi (11n) * 3T3R 5 GHz Wi-Fi (11ac) * 6x GPIO-LEDs (2x wifi, 2x status, 1x lan, 1x power) * 1x GPIO-button (reset) * external h/w watchdog (enabled by default)) * TTL pins are on board (arrow points to VCC, then follows: GND, TX, RX) * 1x ethernet - AR8035 ethernet PHY (RGMII) - 10/100/1000 Mbps Ethernet - 802.3af POE - used as LAN interface * 12-24V 1A DC * internal antennas Flashing instructions: ====================== Various methods can be used to install the actual image on the flash. Two easy ones are: ap51-flash ---------- The tool ap51-flash (https://github.com/ap51-flash/ap51-flash) should be used to transfer the image to the u-boot when the device boots up. initramfs from TFTP ------------------- The serial console must be used to access the u-boot shell during bootup. It can then be used to first boot up the initramfs image from a TFTP server (here with the IP 192.168.1.21): setenv serverip 192.168.1.21 setenv ipaddr 192.168.1.1 tftpboot 0c00000 <filename-of-initramfs-kernel>.bin && bootm $fileaddr The actual sysupgrade image can then be transferred (on the LAN port) to the device via scp <filename-of-squashfs-sysupgrade>.bin root@192.168.1.1:/tmp/ On the device, the sysupgrade must then be started using sysupgrade -n /tmp/<filename-of-squashfs-sysupgrade>.bin Gluon image name change ======================= The device had the image name "openmesh-mr1750" in older versions of Gluon. This had to be changed with the new name in the device trees of the ath79 device tree.
This commit is contained in:
parent
0de095fe9f
commit
39750f19f8
@ -39,6 +39,7 @@ ath79-generic
|
||||
- A60
|
||||
- MR600 (v1, v2)
|
||||
- MR900 (v1, v2)
|
||||
- MR1750 (v1)
|
||||
|
||||
* Plasma Cloud
|
||||
|
||||
|
@ -125,6 +125,13 @@ device('openmesh-mr900-v2', 'openmesh_mr900-v2', {
|
||||
manifest_aliases = {'openmesh-mr900v2'},
|
||||
})
|
||||
|
||||
device('openmesh-mr1750-v1', 'openmesh_mr1750-v1', {
|
||||
packages = ATH10K_PACKAGES_QCA9880,
|
||||
factory = false,
|
||||
-- old name from OpenWrt 19.07.x
|
||||
manifest_aliases = {'openmesh-mr1750'},
|
||||
})
|
||||
|
||||
|
||||
-- Plasma Cloud
|
||||
|
||||
|
Loading…
Reference in New Issue
Block a user