ar71xx: Add support for TP-Link CPE210 v2 (#1445)
This commit is contained in:
Sven Eckelmann
Andreas Ziegler
parent
1649635be4
commit
3d18ae02d8
@ -182,7 +182,7 @@ ar71xx-generic
|
|||||||
- Archer C5 (v1) [#ath10k]_
|
- Archer C5 (v1) [#ath10k]_
|
||||||
- Archer C59 (v1) [#80211s]_
|
- Archer C59 (v1) [#80211s]_
|
||||||
- Archer C7 (v2, v4) [#ath10k]_
|
- Archer C7 (v2, v4) [#ath10k]_
|
||||||
- CPE210 (v1.0, v1.1)
|
- CPE210 (v1.0, v1.1, v2.0)
|
||||||
- CPE220 (v1.1)
|
- CPE220 (v1.1)
|
||||||
- CPE510 (v1.0, v1.1)
|
- CPE510 (v1.0, v1.1)
|
||||||
- CPE520 (v1.1)
|
- CPE520 (v1.1)
|
||||||
|
|||||||
182
patches/lede/0098-ar71xx-disable-40Mhz-refclk-for-QCA953x.patch
Normal file
182
patches/lede/0098-ar71xx-disable-40Mhz-refclk-for-QCA953x.patch
Normal file
@ -0,0 +1,182 @@
|
|||||||
|
From: Sven Eckelmann <sven@narfation.org>
|
||||||
|
Date: Fri, 19 Jan 2018 14:02:09 +0100
|
||||||
|
Subject: ar71xx: disable 40Mhz refclk for QCA953x
|
||||||
|
|
||||||
|
The "QCA9531 v2.0 802.11n 2x2 2.4 GHz Premium SOC for WLAN Platforms"
|
||||||
|
datasheet (80-Y7991-1 Rev. C - October 2014) doesn't specify support for a
|
||||||
|
40 Mhz reference clock. The register description for "Bootstrap Options"
|
||||||
|
(page 31) defines following states for the bit 4 (REF_CLK):
|
||||||
|
|
||||||
|
* 0 - CLK25 (default)
|
||||||
|
* 1 - (reserved)
|
||||||
|
|
||||||
|
Devices like the TP-Link CPE210 v2 has this bit set to 1 but is using a 25
|
||||||
|
Mhz reference clock. OpenWrt is still interpreted this bit as 40 Mhz and
|
||||||
|
then break the bootup of the system due to this incorrect interpretation.
|
||||||
|
|
||||||
|
Signed-off-by: Sven Eckelmann <sven@narfation.org>
|
||||||
|
[refreshed patches]
|
||||||
|
Signed-off-by: Piotr Dymacz <pepe2k@gmail.com>
|
||||||
|
|
||||||
|
Origin: backport, https://github.com/openwrt/openwrt/commit/b1d57dadb2da0e010e157fd2383523578c9dcc2e
|
||||||
|
|
||||||
|
diff --git a/target/linux/ar71xx/patches-4.4/620-MIPS-ath79-add-support-for-QCA953x-SoC.patch b/target/linux/ar71xx/patches-4.4/620-MIPS-ath79-add-support-for-QCA953x-SoC.patch
|
||||||
|
index 777f7b2c8838f2c93f79d5d5212f90b2bd82ced3..d55c97165a5abad8cb25fcc6ddc29415f238c7e6 100644
|
||||||
|
--- a/target/linux/ar71xx/patches-4.4/620-MIPS-ath79-add-support-for-QCA953x-SoC.patch
|
||||||
|
+++ b/target/linux/ar71xx/patches-4.4/620-MIPS-ath79-add-support-for-QCA953x-SoC.patch
|
||||||
|
@@ -44,7 +44,7 @@ meaning of the bits CPUCLK_FROM_CPUPLL and DDRCLK_FROM_DDRPLL is reversed.
|
||||||
|
config ATH79_NVRAM
|
||||||
|
--- a/arch/mips/ath79/clock.c
|
||||||
|
+++ b/arch/mips/ath79/clock.c
|
||||||
|
-@@ -354,6 +354,91 @@ static void __init ar934x_clocks_init(vo
|
||||||
|
+@@ -354,6 +354,87 @@ static void __init ar934x_clocks_init(vo
|
||||||
|
iounmap(dpll_base);
|
||||||
|
}
|
||||||
|
|
||||||
|
@@ -56,13 +56,9 @@ meaning of the bits CPUCLK_FROM_CPUPLL and DDRCLK_FROM_DDRPLL is reversed.
|
||||||
|
+ unsigned long ahb_rate;
|
||||||
|
+ u32 pll, out_div, ref_div, nint, frac, clk_ctrl, postdiv;
|
||||||
|
+ u32 cpu_pll, ddr_pll;
|
||||||
|
-+ u32 bootstrap;
|
||||||
|
+
|
||||||
|
-+ bootstrap = ath79_reset_rr(QCA953X_RESET_REG_BOOTSTRAP);
|
||||||
|
-+ if (bootstrap & QCA953X_BOOTSTRAP_REF_CLK_40)
|
||||||
|
-+ ref_rate = 40 * 1000 * 1000;
|
||||||
|
-+ else
|
||||||
|
-+ ref_rate = 25 * 1000 * 1000;
|
||||||
|
++ /* QCA953X only supports 25MHz ref_clk */
|
||||||
|
++ ref_rate = 25 * 1000 * 1000;
|
||||||
|
+
|
||||||
|
+ pll = ath79_pll_rr(QCA953X_PLL_CPU_CONFIG_REG);
|
||||||
|
+ out_div = (pll >> QCA953X_PLL_CPU_CONFIG_OUTDIV_SHIFT) &
|
||||||
|
@@ -136,7 +132,7 @@ meaning of the bits CPUCLK_FROM_CPUPLL and DDRCLK_FROM_DDRPLL is reversed.
|
||||||
|
static void __init qca955x_clocks_init(void)
|
||||||
|
{
|
||||||
|
unsigned long ref_rate;
|
||||||
|
-@@ -451,6 +536,8 @@ void __init ath79_clocks_init(void)
|
||||||
|
+@@ -451,6 +532,8 @@ void __init ath79_clocks_init(void)
|
||||||
|
ar933x_clocks_init();
|
||||||
|
else if (soc_is_ar934x())
|
||||||
|
ar934x_clocks_init();
|
||||||
|
@@ -247,14 +243,12 @@ meaning of the bits CPUCLK_FROM_CPUPLL and DDRCLK_FROM_DDRPLL is reversed.
|
||||||
|
|
||||||
|
ath79_wmac_data.external_reset = ar933x_wmac_reset;
|
||||||
|
}
|
||||||
|
-@@ -151,6 +151,26 @@ static void ar934x_wmac_setup(void)
|
||||||
|
+@@ -151,6 +151,21 @@ static void ar934x_wmac_setup(void)
|
||||||
|
ath79_wmac_data.get_mac_revision = ar93xx_get_soc_revision;
|
||||||
|
}
|
||||||
|
|
||||||
|
+static void qca953x_wmac_setup(void)
|
||||||
|
+{
|
||||||
|
-+ u32 t;
|
||||||
|
-+
|
||||||
|
+ ath79_wmac_device.name = "qca953x_wmac";
|
||||||
|
+
|
||||||
|
+ ath79_wmac_resources[0].start = QCA953X_WMAC_BASE;
|
||||||
|
@@ -262,11 +256,8 @@ meaning of the bits CPUCLK_FROM_CPUPLL and DDRCLK_FROM_DDRPLL is reversed.
|
||||||
|
+ ath79_wmac_resources[1].start = ATH79_IP2_IRQ(1);
|
||||||
|
+ ath79_wmac_resources[1].end = ATH79_IP2_IRQ(1);
|
||||||
|
+
|
||||||
|
-+ t = ath79_reset_rr(QCA953X_RESET_REG_BOOTSTRAP);
|
||||||
|
-+ if (t & QCA953X_BOOTSTRAP_REF_CLK_40)
|
||||||
|
-+ ath79_wmac_data.is_clk_25mhz = false;
|
||||||
|
-+ else
|
||||||
|
-+ ath79_wmac_data.is_clk_25mhz = true;
|
||||||
|
++ /* QCA953X only supports 25MHz ref_clk */
|
||||||
|
++ ath79_wmac_data.is_clk_25mhz = true;
|
||||||
|
+
|
||||||
|
+ ath79_wmac_data.get_mac_revision = ar93xx_get_soc_revision;
|
||||||
|
+}
|
||||||
|
@@ -274,7 +265,7 @@ meaning of the bits CPUCLK_FROM_CPUPLL and DDRCLK_FROM_DDRPLL is reversed.
|
||||||
|
static void qca955x_wmac_setup(void)
|
||||||
|
{
|
||||||
|
u32 t;
|
||||||
|
-@@ -368,6 +388,8 @@ void __init ath79_register_wmac(u8 *cal_
|
||||||
|
+@@ -368,6 +383,8 @@ void __init ath79_register_wmac(u8 *cal_
|
||||||
|
ar933x_wmac_setup();
|
||||||
|
else if (soc_is_ar934x())
|
||||||
|
ar934x_wmac_setup();
|
||||||
|
@@ -550,7 +541,7 @@ meaning of the bits CPUCLK_FROM_CPUPLL and DDRCLK_FROM_DDRPLL is reversed.
|
||||||
|
+#define QCA953X_BOOTSTRAP_SW_OPTION2 BIT(12)
|
||||||
|
+#define QCA953X_BOOTSTRAP_SW_OPTION1 BIT(11)
|
||||||
|
+#define QCA953X_BOOTSTRAP_EJTAG_MODE BIT(5)
|
||||||
|
-+#define QCA953X_BOOTSTRAP_REF_CLK_40 BIT(4)
|
||||||
|
++#define QCA953X_BOOTSTRAP_REF_CLK BIT(4)
|
||||||
|
+#define QCA953X_BOOTSTRAP_SDRAM_DISABLED BIT(1)
|
||||||
|
+#define QCA953X_BOOTSTRAP_DDR1 BIT(0)
|
||||||
|
+
|
||||||
|
diff --git a/target/linux/ar71xx/patches-4.4/621-MIPS-ath79-add-support-for-QCA956x-SoC.patch b/target/linux/ar71xx/patches-4.4/621-MIPS-ath79-add-support-for-QCA956x-SoC.patch
|
||||||
|
index ed90c40d882fcff1a451533748912865cc78c6e8..de0ee4604cdeb946bab222cacaa51fb150b25aab 100644
|
||||||
|
--- a/target/linux/ar71xx/patches-4.4/621-MIPS-ath79-add-support-for-QCA956x-SoC.patch
|
||||||
|
+++ b/target/linux/ar71xx/patches-4.4/621-MIPS-ath79-add-support-for-QCA956x-SoC.patch
|
||||||
|
@@ -24,7 +24,7 @@
|
||||||
|
config ATH79_NVRAM
|
||||||
|
--- a/arch/mips/ath79/clock.c
|
||||||
|
+++ b/arch/mips/ath79/clock.c
|
||||||
|
-@@ -524,6 +524,100 @@ static void __init qca955x_clocks_init(v
|
||||||
|
+@@ -520,6 +520,100 @@ static void __init qca955x_clocks_init(v
|
||||||
|
clk_add_alias("uart", NULL, "ref", NULL);
|
||||||
|
}
|
||||||
|
|
||||||
|
@@ -125,7 +125,7 @@
|
||||||
|
void __init ath79_clocks_init(void)
|
||||||
|
{
|
||||||
|
if (soc_is_ar71xx())
|
||||||
|
-@@ -540,6 +634,8 @@ void __init ath79_clocks_init(void)
|
||||||
|
+@@ -536,6 +630,8 @@ void __init ath79_clocks_init(void)
|
||||||
|
qca953x_clocks_init();
|
||||||
|
else if (soc_is_qca955x())
|
||||||
|
qca955x_clocks_init();
|
||||||
|
@@ -219,7 +219,7 @@
|
||||||
|
}
|
||||||
|
--- a/arch/mips/ath79/dev-wmac.c
|
||||||
|
+++ b/arch/mips/ath79/dev-wmac.c
|
||||||
|
-@@ -189,6 +189,26 @@ static void qca955x_wmac_setup(void)
|
||||||
|
+@@ -184,6 +184,26 @@ static void qca955x_wmac_setup(void)
|
||||||
|
ath79_wmac_data.is_clk_25mhz = true;
|
||||||
|
}
|
||||||
|
|
||||||
|
@@ -246,7 +246,7 @@
|
||||||
|
static bool __init
|
||||||
|
ar93xx_wmac_otp_read_word(void __iomem *base, int addr, u32 *data)
|
||||||
|
{
|
||||||
|
-@@ -392,6 +412,8 @@ void __init ath79_register_wmac(u8 *cal_
|
||||||
|
+@@ -387,6 +407,8 @@ void __init ath79_register_wmac(u8 *cal_
|
||||||
|
qca953x_wmac_setup();
|
||||||
|
else if (soc_is_qca955x())
|
||||||
|
qca955x_wmac_setup();
|
||||||
|
diff --git a/target/linux/ar71xx/patches-4.4/631-MIPS-ath79-wmac-enable-set-led-pin.patch b/target/linux/ar71xx/patches-4.4/631-MIPS-ath79-wmac-enable-set-led-pin.patch
|
||||||
|
index 16a0b909c570b403473346b0c992f9de02b67132..b0e15379787ade16a02363c78c143e878f27a7f2 100644
|
||||||
|
--- a/target/linux/ar71xx/patches-4.4/631-MIPS-ath79-wmac-enable-set-led-pin.patch
|
||||||
|
+++ b/target/linux/ar71xx/patches-4.4/631-MIPS-ath79-wmac-enable-set-led-pin.patch
|
||||||
|
@@ -1,6 +1,6 @@
|
||||||
|
--- a/arch/mips/ath79/dev-wmac.c
|
||||||
|
+++ b/arch/mips/ath79/dev-wmac.c
|
||||||
|
-@@ -400,6 +400,11 @@ void __init ath79_wmac_set_ext_lna_gpio(
|
||||||
|
+@@ -395,6 +395,11 @@ void __init ath79_wmac_set_ext_lna_gpio(
|
||||||
|
ar934x_set_ext_lna_gpio(chain, gpio);
|
||||||
|
}
|
||||||
|
|
||||||
|
diff --git a/target/linux/ar71xx/patches-4.4/640-MIPS-ath79-add-QCA955x-wmac-reset.patch b/target/linux/ar71xx/patches-4.4/640-MIPS-ath79-add-QCA955x-wmac-reset.patch
|
||||||
|
index 8aa5957a7152af27854f6f7c197120b8029cf9e8..b59e43c7712a18e5e81944361c358dfb08c488ea 100644
|
||||||
|
--- a/target/linux/ar71xx/patches-4.4/640-MIPS-ath79-add-QCA955x-wmac-reset.patch
|
||||||
|
+++ b/target/linux/ar71xx/patches-4.4/640-MIPS-ath79-add-QCA955x-wmac-reset.patch
|
||||||
|
@@ -32,7 +32,7 @@
|
||||||
|
*/
|
||||||
|
--- a/arch/mips/ath79/dev-wmac.c
|
||||||
|
+++ b/arch/mips/ath79/dev-wmac.c
|
||||||
|
-@@ -171,6 +171,27 @@ static void qca953x_wmac_setup(void)
|
||||||
|
+@@ -166,6 +166,27 @@ static void qca953x_wmac_setup(void)
|
||||||
|
ath79_wmac_data.get_mac_revision = ar93xx_get_soc_revision;
|
||||||
|
}
|
||||||
|
|
||||||
|
@@ -60,7 +60,7 @@
|
||||||
|
static void qca955x_wmac_setup(void)
|
||||||
|
{
|
||||||
|
u32 t;
|
||||||
|
-@@ -187,6 +208,8 @@ static void qca955x_wmac_setup(void)
|
||||||
|
+@@ -182,6 +203,8 @@ static void qca955x_wmac_setup(void)
|
||||||
|
ath79_wmac_data.is_clk_25mhz = false;
|
||||||
|
else
|
||||||
|
ath79_wmac_data.is_clk_25mhz = true;
|
||||||
@ -0,0 +1,139 @@
|
|||||||
|
From: Adrian Schmutzler <freifunk@adrianschmutzler.de>
|
||||||
|
Date: Fri, 19 Jan 2018 12:58:40 +0100
|
||||||
|
Subject: ar71xx: Add TP-Link Pharos v2 board detection
|
||||||
|
|
||||||
|
Add support for detecting TP-Link Pharos v2 boards.
|
||||||
|
They use different format in product-info partition than v1 boards.
|
||||||
|
|
||||||
|
Code was written mostly by Alexander Couzens <lynxis@fe80.eu>
|
||||||
|
|
||||||
|
Signed-off-by: Robert Marko <robimarko@gmail.com>
|
||||||
|
Signed-off-by: Adrian Schmutzler <freifunk@adrianschmutzler.de>
|
||||||
|
|
||||||
|
Origin: backport, https://github.com/openwrt/openwrt/commit/2524febf7927a1bf430d64b7790feb126023e3d1
|
||||||
|
|
||||||
|
diff --git a/target/linux/ar71xx/base-files/lib/ar71xx.sh b/target/linux/ar71xx/base-files/lib/ar71xx.sh
|
||||||
|
index b365b6ae4aa6021960499b3889d846b5171eec0f..94311f75989b0861e188dc89b3e714b5545c1ad8 100755
|
||||||
|
--- a/target/linux/ar71xx/base-files/lib/ar71xx.sh
|
||||||
|
+++ b/target/linux/ar71xx/base-files/lib/ar71xx.sh
|
||||||
|
@@ -375,7 +375,7 @@ tplink_pharos_get_model_string() {
|
||||||
|
}
|
||||||
|
|
||||||
|
tplink_pharos_board_detect() {
|
||||||
|
- local model_string="$(tplink_pharos_get_model_string | tr -d '\r')"
|
||||||
|
+ local model_string="$1"
|
||||||
|
local oIFS="$IFS"; IFS=":"; set -- $model_string; IFS="$oIFS"
|
||||||
|
|
||||||
|
local model="${1%%\(*}"
|
||||||
|
@@ -396,6 +396,14 @@ gl_inet_board_detect() {
|
||||||
|
esac
|
||||||
|
}
|
||||||
|
|
||||||
|
+tplink_pharos_v2_get_model_string() {
|
||||||
|
+ local part
|
||||||
|
+ part=$(find_mtd_part 'product-info')
|
||||||
|
+ [ -z "$part" ] && return 1
|
||||||
|
+
|
||||||
|
+ dd if=$part bs=1 skip=4360 count=64 2>/dev/null | tr -d '\r\0' | head -n 1
|
||||||
|
+}
|
||||||
|
+
|
||||||
|
ar71xx_board_detect() {
|
||||||
|
local machine
|
||||||
|
local name
|
||||||
|
@@ -546,11 +554,15 @@ ar71xx_board_detect() {
|
||||||
|
;;
|
||||||
|
*"CPE210/220")
|
||||||
|
name="cpe210"
|
||||||
|
- tplink_pharos_board_detect
|
||||||
|
+ tplink_pharos_board_detect "$(tplink_pharos_get_model_string | tr -d '\r')"
|
||||||
|
+ ;;
|
||||||
|
+ *"CPE210 v2")
|
||||||
|
+ name="cpe210-v2"
|
||||||
|
+ tplink_pharos_board_detect "$(tplink_pharos_v2_get_model_string)"
|
||||||
|
;;
|
||||||
|
*"CPE510/520")
|
||||||
|
name="cpe510"
|
||||||
|
- tplink_pharos_board_detect
|
||||||
|
+ tplink_pharos_board_detect "$(tplink_pharos_get_model_string | tr -d '\r')"
|
||||||
|
;;
|
||||||
|
*CPE830)
|
||||||
|
name="cpe830"
|
||||||
|
@@ -560,11 +572,11 @@ ar71xx_board_detect() {
|
||||||
|
;;
|
||||||
|
*WBS210)
|
||||||
|
name="wbs210"
|
||||||
|
- tplink_pharos_board_detect
|
||||||
|
+ tplink_pharos_board_detect "$(tplink_pharos_get_model_string | tr -d '\r')"
|
||||||
|
;;
|
||||||
|
*WBS510)
|
||||||
|
name="wbs510"
|
||||||
|
- tplink_pharos_board_detect
|
||||||
|
+ tplink_pharos_board_detect "$(tplink_pharos_get_model_string | tr -d '\r')"
|
||||||
|
;;
|
||||||
|
*CR3000)
|
||||||
|
name="cr3000"
|
||||||
|
@@ -641,7 +653,7 @@ ar71xx_board_detect() {
|
||||||
|
;;
|
||||||
|
*"EAP120")
|
||||||
|
name="eap120"
|
||||||
|
- tplink_pharos_board_detect
|
||||||
|
+ tplink_pharos_board_detect "$(tplink_pharos_get_model_string | tr -d '\r')"
|
||||||
|
;;
|
||||||
|
*"EAP300 v2")
|
||||||
|
name="eap300v2"
|
||||||
|
diff --git a/target/linux/ar71xx/base-files/lib/upgrade/platform.sh b/target/linux/ar71xx/base-files/lib/upgrade/platform.sh
|
||||||
|
index 0b422d71c2639a31bc7e88a20976266b66ec4490..9bc49c41a6308b732e45a7ae35c851133c367254 100755
|
||||||
|
--- a/target/linux/ar71xx/base-files/lib/upgrade/platform.sh
|
||||||
|
+++ b/target/linux/ar71xx/base-files/lib/upgrade/platform.sh
|
||||||
|
@@ -97,10 +97,11 @@ tplink_pharos_check_support_list() {
|
||||||
|
local image="$1"
|
||||||
|
local offset="$2"
|
||||||
|
local model="$3"
|
||||||
|
+ local trargs="$4"
|
||||||
|
|
||||||
|
# Here $image is given to dd directly instead of using get_image;
|
||||||
|
# otherwise the skip will take almost a second (as dd can't seek)
|
||||||
|
- dd if="$image" bs=1 skip=$offset count=1024 2>/dev/null | (
|
||||||
|
+ dd if="$image" bs=1 skip=$offset count=1024 2>/dev/null | tr -d "$trargs" | (
|
||||||
|
while IFS= read -r line; do
|
||||||
|
[ "$line" = "$model" ] && exit 0
|
||||||
|
done
|
||||||
|
@@ -110,17 +111,19 @@ tplink_pharos_check_support_list() {
|
||||||
|
}
|
||||||
|
|
||||||
|
tplink_pharos_check_image() {
|
||||||
|
- local magic_long="$(get_magic_long "$1")"
|
||||||
|
- [ "$magic_long" != "7f454c46" ] && {
|
||||||
|
- echo "Invalid image magic '$magic_long'"
|
||||||
|
+ local image_magic="$(get_magic_long "$1")"
|
||||||
|
+ local board_magic="$2"
|
||||||
|
+ [ "$image_magic" != "$board_magic" ] && {
|
||||||
|
+ echo "Invalid image magic '$image_magic'. Expected '$board_magic'."
|
||||||
|
return 1
|
||||||
|
}
|
||||||
|
|
||||||
|
- local model_string="$(tplink_pharos_get_model_string)"
|
||||||
|
+ local model_string="$3"
|
||||||
|
+ local trargs="$4"
|
||||||
|
|
||||||
|
# New images have the support list at 7802888, old ones at 1511432
|
||||||
|
- tplink_pharos_check_support_list "$1" 7802888 "$model_string" || \
|
||||||
|
- tplink_pharos_check_support_list "$1" 1511432 "$model_string" || {
|
||||||
|
+ tplink_pharos_check_support_list "$1" 7802888 "$model_string" "$trargs" || \
|
||||||
|
+ tplink_pharos_check_support_list "$1" 1511432 "$model_string" "$trargs" || {
|
||||||
|
echo "Unsupported image (model not in support-list)"
|
||||||
|
return 1
|
||||||
|
}
|
||||||
|
@@ -507,7 +510,11 @@ platform_check_image() {
|
||||||
|
eap120|\
|
||||||
|
wbs210|\
|
||||||
|
wbs510)
|
||||||
|
- tplink_pharos_check_image "$1" && return 0
|
||||||
|
+ tplink_pharos_check_image "$1" "7f454c46" "$(tplink_pharos_get_model_string)" '' && return 0
|
||||||
|
+ return 1
|
||||||
|
+ ;;
|
||||||
|
+ cpe210-v2)
|
||||||
|
+ tplink_pharos_check_image "$1" "01000000" "$(tplink_pharos_v2_get_model_string)" '\0\xff\r' && return 0
|
||||||
|
return 1
|
||||||
|
;;
|
||||||
|
a40|\
|
||||||
324
patches/lede/0100-ar71xx-Add-support-for-TP-Link-CPE210-v2.patch
Normal file
324
patches/lede/0100-ar71xx-Add-support-for-TP-Link-CPE210-v2.patch
Normal file
@ -0,0 +1,324 @@
|
|||||||
|
From: Adrian Schmutzler <freifunk@adrianschmutzler.de>
|
||||||
|
Date: Fri, 19 Jan 2018 14:45:42 +0100
|
||||||
|
Subject: ar71xx: Add support for TP-Link CPE210 v2
|
||||||
|
|
||||||
|
This PR adds support for a popular low-cost 2.4GHz N based AP
|
||||||
|
|
||||||
|
Specifications:
|
||||||
|
- SoC: Qualcomm Atheros QCA9533 (650MHz)
|
||||||
|
- RAM: 64MB
|
||||||
|
- Storage: 8 MB SPI NOR
|
||||||
|
- Wireless: 2.4GHz N based built into SoC 2x2
|
||||||
|
- Ethernet: 1x 100/10 Mbps, integrated into SoC, 24V POE IN
|
||||||
|
|
||||||
|
Installation:
|
||||||
|
Flash factory image through stock firmware WEB UI
|
||||||
|
or through TFTP
|
||||||
|
To get to TFTP recovery just hold reset button while powering on for
|
||||||
|
around 4-5 seconds and release.
|
||||||
|
Rename factory image to recovery.bin
|
||||||
|
Stock TFTP server IP:192.168.0.100
|
||||||
|
Stock device TFTP adress:192.168.0.254
|
||||||
|
|
||||||
|
Notes:
|
||||||
|
TP-Link does not use bootstrap registers so without this patch reference
|
||||||
|
clock detects as 40MHz while it is actually 25MHz.
|
||||||
|
This is due to messed up bootstrap resistor configuration on the PCB.
|
||||||
|
Provided GPL code just forces 25MHz reference clock.
|
||||||
|
That causes booting with completely wrong clocks, for example, CPU tries
|
||||||
|
to boot at 1040MHz while the stock is 650MHz.
|
||||||
|
So this PR depends on PR #672 to remove 40MHz reference clock.
|
||||||
|
Thanks to Sven Eckelmann <sven@narfation.org> for properly patching that.
|
||||||
|
|
||||||
|
Signed-off-by: Robert Marko <robimarko@gmail.com>
|
||||||
|
Signed-off-by: Adrian Schmutzler <freifunk@adrianschmutzler.de>
|
||||||
|
|
||||||
|
Origin: backport, https://github.com/openwrt/openwrt/commit/5c5bf8b8658a588423f6ec445d7ef6a36f99a396
|
||||||
|
|
||||||
|
diff --git a/target/linux/ar71xx/base-files/etc/board.d/01_leds b/target/linux/ar71xx/base-files/etc/board.d/01_leds
|
||||||
|
index a742854bc9b0aa48c61b37e58288177bbb56d14d..54046dffc9a4d4ad0216dcda32bf98ee5d38b569 100755
|
||||||
|
--- a/target/linux/ar71xx/base-files/etc/board.d/01_leds
|
||||||
|
+++ b/target/linux/ar71xx/base-files/etc/board.d/01_leds
|
||||||
|
@@ -187,16 +187,25 @@ cf-e530n)
|
||||||
|
ucidef_set_led_netdev "wan" "WAN" "$board:blue:wan" "eth1"
|
||||||
|
;;
|
||||||
|
cpe210|\
|
||||||
|
+cpe210-v2|\
|
||||||
|
cpe510|\
|
||||||
|
wbs210|\
|
||||||
|
wbs510)
|
||||||
|
- ucidef_set_led_switch "lan0" "LAN0" "tp-link:green:lan0" "switch0" "0x20"
|
||||||
|
- ucidef_set_led_switch "lan1" "LAN1" "tp-link:green:lan1" "switch0" "0x10"
|
||||||
|
ucidef_set_rssimon "wlan0" "200000" "1"
|
||||||
|
ucidef_set_led_rssi "rssilow" "RSSILOW" "tp-link:green:link1" "wlan0" "1" "100" "0" "13"
|
||||||
|
ucidef_set_led_rssi "rssimediumlow" "RSSIMEDIUMLOW" "tp-link:green:link2" "wlan0" "26" "100" "-25" "13"
|
||||||
|
ucidef_set_led_rssi "rssimediumhigh" "RSSIMEDIUMHIGH" "tp-link:green:link3" "wlan0" "51" "100" "-50" "13"
|
||||||
|
ucidef_set_led_rssi "rssihigh" "RSSIHIGH" "tp-link:green:link4" "wlan0" "76" "100" "-75" "13"
|
||||||
|
+
|
||||||
|
+ case "$board" in
|
||||||
|
+ cpe210-v2)
|
||||||
|
+ ucidef_set_led_netdev "lan" "LAN" "tp-link:green:lan0" "eth0"
|
||||||
|
+ ;;
|
||||||
|
+ *)
|
||||||
|
+ ucidef_set_led_switch "lan0" "LAN0" "tp-link:green:lan0" "switch0" "0x20"
|
||||||
|
+ ucidef_set_led_switch "lan1" "LAN1" "tp-link:green:lan1" "switch0" "0x10"
|
||||||
|
+ ;;
|
||||||
|
+ esac
|
||||||
|
;;
|
||||||
|
cr3000)
|
||||||
|
ucidef_set_led_netdev "wan" "WAN" "pcs:blue:wan" "eth1"
|
||||||
|
diff --git a/target/linux/ar71xx/base-files/etc/board.d/02_network b/target/linux/ar71xx/base-files/etc/board.d/02_network
|
||||||
|
index 875a1a38ada9fb66503505d2f094310db1295a07..633d4e1b7415983f44164187ad3696311ec25621 100755
|
||||||
|
--- a/target/linux/ar71xx/base-files/etc/board.d/02_network
|
||||||
|
+++ b/target/linux/ar71xx/base-files/etc/board.d/02_network
|
||||||
|
@@ -67,6 +67,7 @@ ar71xx_setup_interfaces()
|
||||||
|
cap4200ag|\
|
||||||
|
cf-e380ac-v1|\
|
||||||
|
cf-e380ac-v2|\
|
||||||
|
+ cpe210-v2|\
|
||||||
|
eap120|\
|
||||||
|
eap300v2|\
|
||||||
|
eap7660d|\
|
||||||
|
diff --git a/target/linux/ar71xx/files/arch/mips/ath79/Kconfig.openwrt b/target/linux/ar71xx/files/arch/mips/ath79/Kconfig.openwrt
|
||||||
|
index 2449a8d6bce17f0a703d8fc4f82dd38e1f861ae3..35532d86ac3ad32630592c79477c79783af4addb 100644
|
||||||
|
--- a/target/linux/ar71xx/files/arch/mips/ath79/Kconfig.openwrt
|
||||||
|
+++ b/target/linux/ar71xx/files/arch/mips/ath79/Kconfig.openwrt
|
||||||
|
@@ -1301,6 +1301,7 @@ config ATH79_MACH_ARCHER_C7
|
||||||
|
config ATH79_MACH_CPE510
|
||||||
|
bool "TP-LINK CPE510 support"
|
||||||
|
select SOC_AR934X
|
||||||
|
+ select SOC_QCA953X
|
||||||
|
select ATH79_DEV_ETH
|
||||||
|
select ATH79_DEV_GPIO_BUTTONS
|
||||||
|
select ATH79_DEV_LEDS_GPIO
|
||||||
|
diff --git a/target/linux/ar71xx/files/arch/mips/ath79/mach-cpe510.c b/target/linux/ar71xx/files/arch/mips/ath79/mach-cpe510.c
|
||||||
|
index d2dbed1fe286c44d3188262e984253faaee7edba..ceb1769ddd522d51014228fe65e2662f2f3e627c 100644
|
||||||
|
--- a/target/linux/ar71xx/files/arch/mips/ath79/mach-cpe510.c
|
||||||
|
+++ b/target/linux/ar71xx/files/arch/mips/ath79/mach-cpe510.c
|
||||||
|
@@ -1,7 +1,8 @@
|
||||||
|
/*
|
||||||
|
- * TP-LINK CPE210/220/510/520 board support
|
||||||
|
+ * TP-LINK CPE210/210 v2/220/510/520 board support
|
||||||
|
*
|
||||||
|
* Copyright (C) 2014 Matthias Schiffer <mschiffer@universe-factory.net>
|
||||||
|
+ * Copyright (C) 2017 Robert Marko <robimarko@gmail.com>
|
||||||
|
*
|
||||||
|
* This program is free software; you can redistribute it and/or modify it
|
||||||
|
* under the terms of the GNU General Public License version 2 as published
|
||||||
|
@@ -41,6 +42,8 @@
|
||||||
|
#define CPE510_KEYS_POLL_INTERVAL 20 /* msecs */
|
||||||
|
#define CPE510_KEYS_DEBOUNCE_INTERVAL (3 * CPE510_KEYS_POLL_INTERVAL)
|
||||||
|
|
||||||
|
+/* CPE210 v2 reset GPIO */
|
||||||
|
+#define CPE210_V2_GPIO_BTN_RESET 17
|
||||||
|
|
||||||
|
static struct gpio_led cpe510_leds_gpio[] __initdata = {
|
||||||
|
{
|
||||||
|
@@ -98,6 +101,30 @@ static struct gpio_led wbs510_leds_gpio[] __initdata = {
|
||||||
|
},
|
||||||
|
};
|
||||||
|
|
||||||
|
+static struct gpio_led cpe210_v2_leds_gpio[] __initdata = {
|
||||||
|
+ {
|
||||||
|
+ .name = "tp-link:green:lan0",
|
||||||
|
+ .gpio = CPE510_GPIO_LED_LAN0,
|
||||||
|
+ .active_low = 1,
|
||||||
|
+ }, {
|
||||||
|
+ .name = "tp-link:green:link1",
|
||||||
|
+ .gpio = CPE510_GPIO_LED_L1,
|
||||||
|
+ .active_low = 1,
|
||||||
|
+ }, {
|
||||||
|
+ .name = "tp-link:green:link2",
|
||||||
|
+ .gpio = CPE510_GPIO_LED_L2,
|
||||||
|
+ .active_low = 1,
|
||||||
|
+ }, {
|
||||||
|
+ .name = "tp-link:green:link3",
|
||||||
|
+ .gpio = CPE510_GPIO_LED_L3,
|
||||||
|
+ .active_low = 1,
|
||||||
|
+ }, {
|
||||||
|
+ .name = "tp-link:green:link4",
|
||||||
|
+ .gpio = CPE510_GPIO_LED_L4,
|
||||||
|
+ .active_low = 1,
|
||||||
|
+ },
|
||||||
|
+};
|
||||||
|
+
|
||||||
|
static struct gpio_keys_button cpe510_gpio_keys[] __initdata = {
|
||||||
|
{
|
||||||
|
.desc = "Reset button",
|
||||||
|
@@ -109,6 +136,17 @@ static struct gpio_keys_button cpe510_gpio_keys[] __initdata = {
|
||||||
|
}
|
||||||
|
};
|
||||||
|
|
||||||
|
+static struct gpio_keys_button cpe210_v2_gpio_keys[] __initdata = {
|
||||||
|
+ {
|
||||||
|
+ .desc = "Reset button",
|
||||||
|
+ .type = EV_KEY,
|
||||||
|
+ .code = KEY_RESTART,
|
||||||
|
+ .debounce_interval = CPE510_KEYS_DEBOUNCE_INTERVAL,
|
||||||
|
+ .gpio = CPE210_V2_GPIO_BTN_RESET,
|
||||||
|
+ .active_low = 1,
|
||||||
|
+ }
|
||||||
|
+};
|
||||||
|
+
|
||||||
|
static void __init cpe_setup(u8 *mac)
|
||||||
|
{
|
||||||
|
/* Disable JTAG, enabling GPIOs 0-3 */
|
||||||
|
@@ -171,9 +209,33 @@ static void __init wbs_setup(void)
|
||||||
|
ath79_register_wmac(ee, mac);
|
||||||
|
}
|
||||||
|
|
||||||
|
+static void __init cpe210_v2_setup(void)
|
||||||
|
+{
|
||||||
|
+ u8 *mac = (u8 *) KSEG1ADDR(0x1f830008);
|
||||||
|
+ u8 *ee = (u8 *) KSEG1ADDR(0x1fff1000);
|
||||||
|
+
|
||||||
|
+ ath79_register_leds_gpio(-1, ARRAY_SIZE(cpe210_v2_leds_gpio),
|
||||||
|
+ cpe210_v2_leds_gpio);
|
||||||
|
+ ath79_register_gpio_keys_polled(-1, CPE510_KEYS_POLL_INTERVAL,
|
||||||
|
+ ARRAY_SIZE(cpe210_v2_gpio_keys),
|
||||||
|
+ cpe210_v2_gpio_keys);
|
||||||
|
+ ath79_register_m25p80(NULL);
|
||||||
|
+ ath79_register_mdio(0, 0x0);
|
||||||
|
+ ath79_init_mac(ath79_eth0_data.mac_addr, mac, 0);
|
||||||
|
+ ath79_eth0_data.duplex = DUPLEX_FULL;
|
||||||
|
+ ath79_eth0_data.phy_if_mode = PHY_INTERFACE_MODE_MII;
|
||||||
|
+ ath79_eth0_data.speed = SPEED_100;
|
||||||
|
+ ath79_eth0_data.phy_mask = BIT(4);
|
||||||
|
+ ath79_register_eth(0);
|
||||||
|
+ ath79_register_wmac(ee, mac);
|
||||||
|
+}
|
||||||
|
+
|
||||||
|
MIPS_MACHINE(ATH79_MACH_CPE210, "CPE210", "TP-LINK CPE210/220",
|
||||||
|
cpe210_setup);
|
||||||
|
|
||||||
|
+MIPS_MACHINE(ATH79_MACH_CPE210_V2, "CPE210V2", "TP-LINK CPE210 v2",
|
||||||
|
+ cpe210_v2_setup);
|
||||||
|
+
|
||||||
|
MIPS_MACHINE(ATH79_MACH_CPE510, "CPE510", "TP-LINK CPE510/520",
|
||||||
|
cpe510_setup);
|
||||||
|
|
||||||
|
diff --git a/target/linux/ar71xx/files/arch/mips/ath79/machtypes.h b/target/linux/ar71xx/files/arch/mips/ath79/machtypes.h
|
||||||
|
index a4c7f52fe94e17bc48bebfb460f12f3e5ac35afe..e7e7f94775a3122286dc39447f04b42f4863f313 100644
|
||||||
|
--- a/target/linux/ar71xx/files/arch/mips/ath79/machtypes.h
|
||||||
|
+++ b/target/linux/ar71xx/files/arch/mips/ath79/machtypes.h
|
||||||
|
@@ -64,7 +64,8 @@ enum ath79_mach_type {
|
||||||
|
ATH79_MACH_CF_E380AC_V2, /* COMFAST CF-E380AC v2 */
|
||||||
|
ATH79_MACH_CF_E520N, /* COMFAST CF-E520N */
|
||||||
|
ATH79_MACH_CF_E530N, /* COMFAST CF-E530N */
|
||||||
|
- ATH79_MACH_CPE210, /* TP-LINK CPE210 */
|
||||||
|
+ ATH79_MACH_CPE210, /* TP-LINK CPE210 v1 */
|
||||||
|
+ ATH79_MACH_CPE210_V2, /* TP-LINK CPE210 v2 */
|
||||||
|
ATH79_MACH_CPE510, /* TP-LINK CPE510 */
|
||||||
|
ATH79_MACH_CPE830, /* YunCore CPE830 */
|
||||||
|
ATH79_MACH_CPE870, /* YunCore CPE870 */
|
||||||
|
diff --git a/target/linux/ar71xx/image/tp-link.mk b/target/linux/ar71xx/image/tp-link.mk
|
||||||
|
index 6a3faef518ebfa4f36d3074ee9c102b801e04275..b61ef6dc78918dd8d040c0f2bfb6451e5e13ba92 100644
|
||||||
|
--- a/target/linux/ar71xx/image/tp-link.mk
|
||||||
|
+++ b/target/linux/ar71xx/image/tp-link.mk
|
||||||
|
@@ -164,22 +164,26 @@ define Device/archer-c60-v1
|
||||||
|
endef
|
||||||
|
TARGET_DEVICES += archer-c60-v1
|
||||||
|
|
||||||
|
-define Device/cpe510-520
|
||||||
|
- DEVICE_TITLE := TP-LINK CPE510/520
|
||||||
|
+define Device/cpexxx
|
||||||
|
DEVICE_PACKAGES := rssileds
|
||||||
|
MTDPARTS := spi0.0:128k(u-boot)ro,64k(partition-table)ro,64k(product-info)ro,1792k(kernel),5888k(rootfs),192k(config)ro,64k(ART)ro,7680k@0x40000(firmware)
|
||||||
|
IMAGE_SIZE := 7680k
|
||||||
|
- BOARDNAME := CPE510
|
||||||
|
- TPLINK_BOARD_NAME := CPE510
|
||||||
|
DEVICE_PROFILE := CPE510
|
||||||
|
LOADER_TYPE := elf
|
||||||
|
+ IMAGES := sysupgrade.bin factory.bin
|
||||||
|
+ IMAGE/sysupgrade.bin := append-rootfs | tplink-safeloader sysupgrade
|
||||||
|
+ IMAGE/factory.bin := append-rootfs | tplink-safeloader factory
|
||||||
|
+endef
|
||||||
|
+
|
||||||
|
+define Device/cpe510-520
|
||||||
|
+ $(Device/cpexxx)
|
||||||
|
+ DEVICE_TITLE := TP-LINK CPE510/520 v1
|
||||||
|
+ BOARDNAME := CPE510
|
||||||
|
+ TPLINK_BOARD_NAME := CPE510
|
||||||
|
LOADER_FLASH_OFFS := 0x43000
|
||||||
|
COMPILE := loader-$(1).elf
|
||||||
|
COMPILE/loader-$(1).elf := loader-okli-compile
|
||||||
|
KERNEL := kernel-bin | lzma | uImage lzma -M 0x4f4b4c49 | loader-okli $(1) 12288
|
||||||
|
- IMAGES := sysupgrade.bin factory.bin
|
||||||
|
- IMAGE/sysupgrade.bin := append-rootfs | tplink-safeloader sysupgrade
|
||||||
|
- IMAGE/factory.bin := append-rootfs | tplink-safeloader factory
|
||||||
|
endef
|
||||||
|
|
||||||
|
define Device/cpe210-220
|
||||||
|
@@ -190,6 +194,19 @@ $(Device/cpe510-520)
|
||||||
|
TPLINK_BOARD_NAME := CPE210
|
||||||
|
endef
|
||||||
|
|
||||||
|
+define Device/cpe210-v2
|
||||||
|
+ $(Device/cpexxx)
|
||||||
|
+ DEVICE_TITLE := TP-LINK CPE210 v2
|
||||||
|
+ BOARDNAME := CPE210V2
|
||||||
|
+ TPLINK_BOARD_NAME := CPE210V2
|
||||||
|
+ KERNEL := kernel-bin | patch-cmdline | lzma | mktplinkfw-combined
|
||||||
|
+ TPLINK_HWID := 0x0
|
||||||
|
+ TPLINK_HWREV := 0
|
||||||
|
+ TPLINK_HEADER_VERSION := 1
|
||||||
|
+ TPLINK_FLASHLAYOUT := 8Mlzma
|
||||||
|
+endef
|
||||||
|
+TARGET_DEVICES += cpe210-v2
|
||||||
|
+
|
||||||
|
define Device/wbs210
|
||||||
|
$(Device/cpe510-520)
|
||||||
|
DEVICE_TITLE := TP-LINK WBS210
|
||||||
|
diff --git a/tools/firmware-utils/src/tplink-safeloader.c b/tools/firmware-utils/src/tplink-safeloader.c
|
||||||
|
index 23b69f3bd0eb66aca650eb2ffd7d5cd2a7cb5194..e6ecc5b2c52c1627c8b998fa731b50ed39649f96 100644
|
||||||
|
--- a/tools/firmware-utils/src/tplink-safeloader.c
|
||||||
|
+++ b/tools/firmware-utils/src/tplink-safeloader.c
|
||||||
|
@@ -154,6 +154,48 @@ static struct device_info boards[] = {
|
||||||
|
.last_sysupgrade_partition = "support-list",
|
||||||
|
},
|
||||||
|
|
||||||
|
+ /** Firmware layout for the CPE210 V2 */
|
||||||
|
+ {
|
||||||
|
+ .id = "CPE210V2",
|
||||||
|
+ .vendor = "CPE210(TP-LINK|UN|N300-2|00000000):2.0\r\n",
|
||||||
|
+ .support_list =
|
||||||
|
+ "SupportList:\r\n"
|
||||||
|
+ "CPE210(TP-LINK|EU|N300-2|00000000):2.0\r\n"
|
||||||
|
+ "CPE210(TP-LINK|EU|N300-2|45550000):2.0\r\n"
|
||||||
|
+ "CPE210(TP-LINK|EU|N300-2|55530000):2.0\r\n"
|
||||||
|
+ "CPE210(TP-LINK|UN|N300-2|00000000):2.0\r\n"
|
||||||
|
+ "CPE210(TP-LINK|UN|N300-2|45550000):2.0\r\n"
|
||||||
|
+ "CPE210(TP-LINK|UN|N300-2|55530000):2.0\r\n"
|
||||||
|
+ "CPE210(TP-LINK|US|N300-2|55530000):2.0\r\n"
|
||||||
|
+ "CPE210(TP-LINK|UN|N300-2):2.0\r\n"
|
||||||
|
+ "CPE210(TP-LINK|EU|N300-2):2.0\r\n"
|
||||||
|
+ "CPE210(TP-LINK|US|N300-2):2.0\r\n",
|
||||||
|
+ .support_trail = '\xff',
|
||||||
|
+ .soft_ver = NULL,
|
||||||
|
+
|
||||||
|
+ .partitions = {
|
||||||
|
+ {"fs-uboot", 0x00000, 0x20000},
|
||||||
|
+ {"partition-table", 0x20000, 0x02000},
|
||||||
|
+ {"default-mac", 0x30000, 0x00020},
|
||||||
|
+ {"product-info", 0x31100, 0x00100},
|
||||||
|
+ {"device-info", 0x31400, 0x00400},
|
||||||
|
+ {"signature", 0x32000, 0x00400},
|
||||||
|
+ {"device-id", 0x33000, 0x00100},
|
||||||
|
+ {"os-image", 0x40000, 0x1c0000},
|
||||||
|
+ {"file-system", 0x200000, 0x5b0000},
|
||||||
|
+ {"soft-version", 0x7b0000, 0x00100},
|
||||||
|
+ {"support-list", 0x7b1000, 0x01000},
|
||||||
|
+ {"user-config", 0x7c0000, 0x10000},
|
||||||
|
+ {"default-config", 0x7d0000, 0x10000},
|
||||||
|
+ {"log", 0x7e0000, 0x10000},
|
||||||
|
+ {"radio", 0x7f0000, 0x10000},
|
||||||
|
+ {NULL, 0, 0}
|
||||||
|
+ },
|
||||||
|
+
|
||||||
|
+ .first_sysupgrade_partition = "os-image",
|
||||||
|
+ .last_sysupgrade_partition = "support-list",
|
||||||
|
+ },
|
||||||
|
+
|
||||||
|
/** Firmware layout for the CPE510/520 */
|
||||||
|
{
|
||||||
|
.id = "CPE510",
|
||||||
@ -160,6 +160,8 @@ device tp-link-cpe210-v1.0 cpe210-220
|
|||||||
alias tp-link-cpe210-v1.1
|
alias tp-link-cpe210-v1.1
|
||||||
alias tp-link-cpe220-v1.1
|
alias tp-link-cpe220-v1.1
|
||||||
|
|
||||||
|
device tp-link-cpe210-v2.0 cpe210-v2
|
||||||
|
|
||||||
device tp-link-cpe510-v1.0 cpe510-520
|
device tp-link-cpe510-v1.0 cpe510-520
|
||||||
alias tp-link-cpe510-v1.1
|
alias tp-link-cpe510-v1.1
|
||||||
alias tp-link-cpe520-v1.1
|
alias tp-link-cpe520-v1.1
|
||||||
|
|||||||
Loading…
Reference in New Issue
Block a user