Add support for Ubiquiti NanoStation and Loco M XW (marked as broken for now)

This commit is contained in:
Matthias Schiffer 2014-11-26 23:57:34 +01:00
parent 6a0e50aed4
commit 4113b17746
3 changed files with 235 additions and 0 deletions

View File

@ -0,0 +1,72 @@
From: Matthias Schiffer <mschiffer@universe-factory.net>
Date: Wed, 26 Nov 2014 23:20:33 +0100
Subject: ar71xx: refactor ubnt xw board setup
Signed-off-by: Alexander Couzens <lynxis@fe80.eu>
diff --git a/target/linux/ar71xx/patches-3.10/616-MIPS-ath79-ubnt-xw.patch b/target/linux/ar71xx/patches-3.10/616-MIPS-ath79-ubnt-xw.patch
index ed2fd24..9413bd8 100644
--- a/target/linux/ar71xx/patches-3.10/616-MIPS-ath79-ubnt-xw.patch
+++ b/target/linux/ar71xx/patches-3.10/616-MIPS-ath79-ubnt-xw.patch
@@ -1,6 +1,8 @@
---- a/arch/mips/ath79/mach-ubnt-xm.c
-+++ b/arch/mips/ath79/mach-ubnt-xm.c
-@@ -332,3 +332,60 @@ static void __init ubnt_uap_pro_setup(vo
+Index: linux-3.10.49/arch/mips/ath79/mach-ubnt-xm.c
+===================================================================
+--- linux-3.10.49.orig/arch/mips/ath79/mach-ubnt-xm.c 2014-08-15 22:55:37.890080659 +0200
++++ linux-3.10.49/arch/mips/ath79/mach-ubnt-xm.c 2014-08-15 22:58:31.061570912 +0200
+@@ -332,3 +332,67 @@
MIPS_MACHINE(ATH79_MACH_UBNT_UAP_PRO, "UAP-PRO", "Ubiquiti UniFi AP Pro",
ubnt_uap_pro_setup);
@@ -29,7 +31,7 @@
+ },
+};
+
-+static void __init ubnt_nano_m_xw_setup(void)
++static void __init ubnt_xw_init(void)
+{
+ u8 *eeprom = (u8 *) KSEG1ADDR(0x1fff0000);
+
@@ -44,26 +46,36 @@
+ ath79_register_wmac(eeprom + UAP_PRO_WMAC_CALDATA_OFFSET, NULL);
+ ap91_pci_init(eeprom + UAP_PRO_PCI_CALDATA_OFFSET, NULL);
+
-+ ath79_register_mdio(0, ~(BIT(0) | BIT(1) | BIT(5)));
+
+ ath79_setup_ar934x_eth_cfg(AR934X_ETH_CFG_MII_GMAC0 | AR934X_ETH_CFG_MII_GMAC0_SLAVE);
+ ath79_init_mac(ath79_eth0_data.mac_addr,
+ eeprom + UAP_PRO_MAC0_OFFSET, 0);
+
-+ /* GMAC0 is connected to an AR8326 switch */
+ ath79_eth0_data.phy_if_mode = PHY_INTERFACE_MODE_MII;
++ ath79_eth0_data.mii_bus_dev = &ath79_mdio0_device.dev;
++}
++
++static void __init ubnt_nano_m_xw_setup(void)
++{
++ ubnt_xw_init();
++
++ /* GMAC0 is connected to an AR8326 switch */
++ ath79_register_mdio(0, ~(BIT(0) | BIT(1) | BIT(5)));
+ ath79_eth0_data.phy_mask = (BIT(0) | BIT(1) | BIT(5));
+ ath79_eth0_data.speed = SPEED_100;
+ ath79_eth0_data.duplex = DUPLEX_FULL;
-+ ath79_eth0_data.mii_bus_dev = &ath79_mdio0_device.dev;
+ ath79_register_eth(0);
+}
+
+MIPS_MACHINE(ATH79_MACH_UBNT_NANO_M_XW, "UBNT-NM-XW", "Ubiquiti Nanostation M XW",
+ ubnt_nano_m_xw_setup);
++
--- a/arch/mips/ath79/machtypes.h
+++ b/arch/mips/ath79/machtypes.h
-@@ -124,6 +124,7 @@ enum ath79_mach_type {
+@@ -121,9 +121,10 @@ enum ath79_mach_type {
+ ATH79_MACH_TL_WR941ND, /* TP-LINK TL-WR941ND */
+ ATH79_MACH_UBNT_AIRROUTER, /* Ubiquiti AirRouter */
+ ATH79_MACH_UBNT_BULLET_M, /* Ubiquiti Bullet M */
ATH79_MACH_UBNT_LSSR71, /* Ubiquiti LS-SR71 */
ATH79_MACH_UBNT_LSX, /* Ubiquiti LSX */
ATH79_MACH_UBNT_NANO_M, /* Ubiquiti NanoStation M */

View File

@ -0,0 +1,161 @@
From: Matthias Schiffer <mschiffer@universe-factory.net>
Date: Wed, 26 Nov 2014 23:20:46 +0100
Subject: ar71xx: add board support for ubnt loco m xw
Signed-off-by: Alexander Couzens <lynxis@fe80.eu>
diff --git a/target/linux/ar71xx/base-files/etc/diag.sh b/target/linux/ar71xx/base-files/etc/diag.sh
index 4b510dd..6e63343 100755
--- a/target/linux/ar71xx/base-files/etc/diag.sh
+++ b/target/linux/ar71xx/base-files/etc/diag.sh
@@ -34,7 +34,7 @@ get_status_led() {
aw-nr580)
status_led="aw-nr580:green:ready"
;;
- bullet-m | rocket-m | nano-m | nanostation-m | nanostation-m-xw)
+ bullet-m | rocket-m | nano-m | nanostation-m | nanostation-m-xw | loco-m-xw)
status_led="ubnt:green:link4"
;;
bxu2000n-2-a1)
diff --git a/target/linux/ar71xx/base-files/etc/uci-defaults/01_leds b/target/linux/ar71xx/base-files/etc/uci-defaults/01_leds
index fb8df40..8f845a0 100755
--- a/target/linux/ar71xx/base-files/etc/uci-defaults/01_leds
+++ b/target/linux/ar71xx/base-files/etc/uci-defaults/01_leds
@@ -38,7 +38,8 @@ ap113)
bullet-m | \
nanostation-m | \
rocket-m | \
-nanostation-m-xw)
+nanostation-m-xw | \
+loco-m-xw)
ucidef_set_led_rssi "rssilow" "RSSILOW" "ubnt:red:link1" "wlan0" "1" "100" "0" "13"
ucidef_set_led_rssi "rssimediumlow" "RSSIMEDIUMLOW" "ubnt:orange:link2" "wlan0" "26" "100" "-25" "13"
ucidef_set_led_rssi "rssimediumhigh" "RSSIMEDIUMHIGH" "ubnt:green:link3" "wlan0" "51" "100" "-50" "13"
diff --git a/target/linux/ar71xx/base-files/etc/uci-defaults/02_network b/target/linux/ar71xx/base-files/etc/uci-defaults/02_network
index a9f00fa..5641a86 100755
--- a/target/linux/ar71xx/base-files/etc/uci-defaults/02_network
+++ b/target/linux/ar71xx/base-files/etc/uci-defaults/02_network
@@ -293,6 +293,7 @@ bullet-m |\
cap4200ag |\
eap300v2 |\
eap7660d |\
+loco-m-xw |\
mr600 |\
mr600v2 |\
rb-411 |\
diff --git a/target/linux/ar71xx/base-files/lib/ar71xx.sh b/target/linux/ar71xx/base-files/lib/ar71xx.sh
index 0b0a8d6..4e58efe 100755
--- a/target/linux/ar71xx/base-files/lib/ar71xx.sh
+++ b/target/linux/ar71xx/base-files/lib/ar71xx.sh
@@ -396,6 +396,9 @@ ar71xx_board_detect() {
*"Bullet M")
name="bullet-m"
;;
+ *"Loco M XW")
+ name="loco-m-xw"
+ ;;
*"Nanostation M")
name="nanostation-m"
;;
diff --git a/target/linux/ar71xx/base-files/lib/upgrade/platform.sh b/target/linux/ar71xx/base-files/lib/upgrade/platform.sh
index 15e998c..7f02089 100755
--- a/target/linux/ar71xx/base-files/lib/upgrade/platform.sh
+++ b/target/linux/ar71xx/base-files/lib/upgrade/platform.sh
@@ -217,6 +217,7 @@ platform_check_image() {
airgateway | \
airrouter | \
bullet-m | \
+ loco-m-xw | \
nanostation-m | \
rocket-m | \
nanostation-m-xw | \
diff --git a/target/linux/ar71xx/image/Makefile b/target/linux/ar71xx/image/Makefile
index 5ff7f35..0d88ea5 100644
--- a/target/linux/ar71xx/image/Makefile
+++ b/target/linux/ar71xx/image/Makefile
@@ -1275,6 +1275,7 @@ $(eval $(call SingleProfile,UBNTXM,64kraw,UBNTNANOM,ubnt-nano-m,UBNT-NM,ttyS0,11
$(eval $(call SingleProfile,UBNTXM,64kraw,UBNTUNIFI,ubnt-unifi,UBNT-UF,ttyS0,115200,XM,BZ,ar7240))
$(eval $(call SingleProfile,UBNTXM,64kraw,UBNTUNIFIOUTDOOR,ubnt-unifi-outdoor,UBNT-U20,ttyS0,115200,XM,BZ,ar7240))
$(eval $(call SingleProfile,UBNTXM,64kraw,UBNTNANOMXW,ubnt-nano-m-xw,UBNT-NM-XW,ttyS0,115200,XM,XW,ar934x))
+$(eval $(call SingleProfile,UBNTXM,64kraw,UBNTLOCOXW,ubnt-loco-m-xw,UBNT-LOCO-XW,ttyS0,115200,XM,XW,ar934x))
$(eval $(call SingleProfile,UBNTXM,64kraw,UBNTAIRGW,ubnt-air-gateway,UBNT-AGW,ttyATH0,115200,XM,AirGW,ar933x))
$(eval $(call SingleProfile,WHRHPG300N,64kraw,WHRG301N,whr-g301n,WHR-G301N,ttyS0,115200,$$(whrhpg300n_mtdlayout),WHR-G301N))
@@ -1320,7 +1321,7 @@ $(eval $(call MultiProfile,TLWR941,TLWR941NV2 TLWR941NV3 TLWR941NV4 TLWR941NV6))
$(eval $(call MultiProfile,TLWR1043,TLWR1043V1 TLWR1043V2))
$(eval $(call MultiProfile,TLWDR4300,TLWDR3500V1 TLWDR3600V1 TLWDR4300V1 TLWDR4300V1IL TLWDR4310V1 MW4530RV1))
$(eval $(call MultiProfile,TUBE2H,TUBE2H8M TUBE2H16M))
-$(eval $(call MultiProfile,UBNT,UBNTAIRROUTER UBNTRS UBNTRSPRO UBNTLSSR71 UBNTBULLETM UBNTROCKETM UBNTNANOM UBNTNANOMXW UBNTUNIFI UBNTUNIFIOUTDOOR UAPPRO UBNTAIRGW))
+$(eval $(call MultiProfile,UBNT,UBNTAIRROUTER UBNTRS UBNTRSPRO UBNTLSSR71 UBNTBULLETM UBNTROCKETM UBNTNANOM UBNTNANOMXW UBNTLOCOXW UBNTUNIFI UBNTUNIFIOUTDOOR UAPPRO UBNTAIRGW))
$(eval $(call MultiProfile,WNDR3700,WNDR3700V1 WNDR3700V2 WNDR3800 WNDR3800CH WNDRMAC WNDRMACV2))
$(eval $(call MultiProfile,WNR612V2,REALWNR612V2 N150R))
$(eval $(call MultiProfile,WP543,WP543_2M WP543_4M WP543_8M WP543_16M))
diff --git a/target/linux/ar71xx/patches-3.10/616-MIPS-ath79-ubnt-xw.patch b/target/linux/ar71xx/patches-3.10/616-MIPS-ath79-ubnt-xw.patch
index 9413bd8..5e3d4d4 100644
--- a/target/linux/ar71xx/patches-3.10/616-MIPS-ath79-ubnt-xw.patch
+++ b/target/linux/ar71xx/patches-3.10/616-MIPS-ath79-ubnt-xw.patch
@@ -1,8 +1,6 @@
-Index: linux-3.10.49/arch/mips/ath79/mach-ubnt-xm.c
-===================================================================
---- linux-3.10.49.orig/arch/mips/ath79/mach-ubnt-xm.c 2014-08-15 22:55:37.890080659 +0200
-+++ linux-3.10.49/arch/mips/ath79/mach-ubnt-xm.c 2014-08-15 22:58:31.061570912 +0200
-@@ -332,3 +332,67 @@
+--- a/arch/mips/ath79/mach-ubnt-xm.c
++++ b/arch/mips/ath79/mach-ubnt-xm.c
+@@ -332,3 +332,78 @@ static void __init ubnt_uap_pro_setup(vo
MIPS_MACHINE(ATH79_MACH_UBNT_UAP_PRO, "UAP-PRO", "Ubiquiti UniFi AP Pro",
ubnt_uap_pro_setup);
@@ -67,15 +65,27 @@ Index: linux-3.10.49/arch/mips/ath79/mach-ubnt-xm.c
+ ath79_register_eth(0);
+}
+
++static void __init ubnt_loco_m_xw_setup(void)
++{
++ ubnt_xw_init();
++
++ ath79_register_mdio(0, ~BIT(1));
++ ath79_eth0_data.phy_mask = BIT(1);
++ ath79_register_eth(0);
++}
++
+MIPS_MACHINE(ATH79_MACH_UBNT_NANO_M_XW, "UBNT-NM-XW", "Ubiquiti Nanostation M XW",
+ ubnt_nano_m_xw_setup);
+
++MIPS_MACHINE(ATH79_MACH_UBNT_LOCO_M_XW, "UBNT-LOCO-XW", "Ubiquiti Loco M XW",
++ ubnt_loco_m_xw_setup);
--- a/arch/mips/ath79/machtypes.h
+++ b/arch/mips/ath79/machtypes.h
-@@ -121,9 +121,10 @@ enum ath79_mach_type {
+@@ -121,9 +121,11 @@ enum ath79_mach_type {
ATH79_MACH_TL_WR941ND, /* TP-LINK TL-WR941ND */
ATH79_MACH_UBNT_AIRROUTER, /* Ubiquiti AirRouter */
ATH79_MACH_UBNT_BULLET_M, /* Ubiquiti Bullet M */
++ ATH79_MACH_UBNT_LOCO_M_XW, /* Ubiquiti Loco M XW */
ATH79_MACH_UBNT_LSSR71, /* Ubiquiti LS-SR71 */
ATH79_MACH_UBNT_LSX, /* Ubiquiti LSX */
ATH79_MACH_UBNT_NANO_M, /* Ubiquiti NanoStation M */
diff --git a/target/linux/ar71xx/patches-3.10/722-MIPS-ath79-add-airGateway-support.patch b/target/linux/ar71xx/patches-3.10/722-MIPS-ath79-add-airGateway-support.patch
index 0fe62d9..c9d1e1e 100644
--- a/target/linux/ar71xx/patches-3.10/722-MIPS-ath79-add-airGateway-support.patch
+++ b/target/linux/ar71xx/patches-3.10/722-MIPS-ath79-add-airGateway-support.patch
@@ -12,10 +12,10 @@
#include "dev-ap9x-pci.h"
#include "dev-eth.h"
#include "dev-gpio-buttons.h"
-@@ -389,3 +391,65 @@ static void __init ubnt_nano_m_xw_setup(
+@@ -406,3 +408,65 @@ MIPS_MACHINE(ATH79_MACH_UBNT_NANO_M_XW,
- MIPS_MACHINE(ATH79_MACH_UBNT_NANO_M_XW, "UBNT-NM-XW", "Ubiquiti Nanostation M XW",
- ubnt_nano_m_xw_setup);
+ MIPS_MACHINE(ATH79_MACH_UBNT_LOCO_M_XW, "UBNT-LOCO-XW", "Ubiquiti Loco M XW",
+ ubnt_loco_m_xw_setup);
+
+static struct gpio_led ubnt_airgateway_gpio_leds[] __initdata = {
+ {
@@ -87,4 +87,4 @@
+ ATH79_MACH_UBNT_AIRGW, /* Ubiquiti AirGateway */
ATH79_MACH_UBNT_AIRROUTER, /* Ubiquiti AirRouter */
ATH79_MACH_UBNT_BULLET_M, /* Ubiquiti Bullet M */
- ATH79_MACH_UBNT_LSSR71, /* Ubiquiti LS-SR71 */
+ ATH79_MACH_UBNT_LOCO_M_XW, /* Ubiquiti Loco M XW */

View File

@ -107,6 +107,8 @@ $(eval $(call GluonModel,UBNT,ubnt-unifi-squashfs,ubiquiti-unifi))
$(eval $(call GluonModel,UBNT,ubnt-unifi-outdoor-squashfs,ubiquiti-unifiap-outdoor)) $(eval $(call GluonModel,UBNT,ubnt-unifi-outdoor-squashfs,ubiquiti-unifiap-outdoor))
ifeq ($(BROKEN),1) ifeq ($(BROKEN),1)
$(eval $(call GluonModel,UBNT,ubnt-uap-pro-squashfs,ubiquiti-unifi-ap-pro)) $(eval $(call GluonModel,UBNT,ubnt-uap-pro-squashfs,ubiquiti-unifi-ap-pro))
$(eval $(call GluonModel,UBNT,ubnt-nano-m-xw-squashfs,ubiquiti-nanostation-m-xw))
$(eval $(call GluonModel,UBNT,ubnt-loco-m-xw-squashfs,ubiquiti-loco-m-xw))
endif endif