Merge pull request #2807 from freifunk-gluon/release-notes/v2022.1.3

docs: Add v2022.1.3 release notes

README.md

@@ -30,7 +30,7 @@ the future development of Gluon.
 
 Please refrain from using the `master` branch for anything else but development purposes!
 Use the most recent release instead. You can list all releases by running `git tag`
-and switch to one by running `git checkout v2022.1.2 && make update`.
+and switch to one by running `git checkout v2022.1.3 && make update`.
 
 If you're using the autoupdater, do not autoupdate nodes with anything but releases.
 If you upgrade using random master commits the nodes *might break* eventually.

contrib/ci/minimal-site/site.conf

@@ -1,4 +1,4 @@
--- This is an example site configuration for Gluon v2022.1.2
+-- This is an example site configuration for Gluon v2022.1.3
 --
 -- Take a look at the documentation located at
 -- https://gluon.readthedocs.io/ for details.

docs/conf.py

@@ -24,7 +24,7 @@ copyright = '2015-2022, Project Gluon'
 author = 'Project Gluon'
 
 # The short X.Y version
-version = '2022.1.2'
+version = '2022.1.3'
 # The full version, including alpha/beta/rc tags
 release = version
 

docs/releases/index.rst

@@ -5,6 +5,7 @@ Release Notes
    :caption: Gluon 2022.1
    :maxdepth: 2
 
+   v2022.1.3
    v2022.1.2
    v2022.1.1
    v2022.1

docs/releases/v2022.1.3.rst

@@ -0,0 +1,40 @@
+Gluon 2022.1.3
+==============
+
+Bugfixes
+--------
+
+ * Ipq40xx Wave2 devices temporarily use non-ct firmware again to work around 802.11s unicast package loss in ath10k-ct
+   (`#2692 <https://github.com/freifunk-gluon/gluon/issues/2692>`_)
+
+ * Modify kernel builds slightly to work around a boot hang on various devices based on the QCA9563 SoC - especially the Unifi AC-* devices
+   (`#2784 <https://github.com/freifunk-gluon/gluon/issues/2784>`_)
+
+ * Work around an issue with wifi setup timing by waiting a bit while device initialisation is ongoing
+   (`#2779 <https://github.com/freifunk-gluon/gluon/issues/2779>`_)
+
+
+Known issues
+------------
+
+* Upgrading EdgeRouter-X from versions before v2020.1.x may lead to a soft-bricked state due to bad blocks on the NAND flash which the NAND driver before this release does not handle well.
+  (`#1937 <https://github.com/freifunk-gluon/gluon/issues/1937>`_)
+
+* The integration of the BATMAN_V routing algorithm is incomplete.
+
+  - Mesh neighbors don't appear on the status page. (`#1726 <https://github.com/freifunk-gluon/gluon/issues/1726>`_)
+    Many tools have the BATMAN_IV metric hardcoded, these need to be updated to account for the new throughput
+    metric.
+  - Throughput values are not correctly acquired for different interface types.
+    (`#1728 <https://github.com/freifunk-gluon/gluon/issues/1728>`_)
+    This affects virtual interface types like bridges and VXLAN.
+
+* Default TX power on many Ubiquiti devices is too high, correct offsets are unknown
+  (`#94 <https://github.com/freifunk-gluon/gluon/issues/94>`_)
+
+  Reducing the TX power in the Advanced Settings is recommended.
+
+* In configurations without VXLAN, the MAC address of the WAN interface is modified even when Mesh-on-WAN is disabled
+  (`#496 <https://github.com/freifunk-gluon/gluon/issues/496>`_)
+
+  This may lead to issues in environments where a fixed MAC address is expected (like VMware when promiscuous mode is disallowed).

docs/site-example/site.conf

@@ -1,4 +1,4 @@
--- This is an example site configuration for Gluon v2022.1.2
+-- This is an example site configuration for Gluon v2022.1.3
 --
 -- Take a look at the documentation located at
 -- https://gluon.readthedocs.io/ for details.

docs/user/getting_started.rst

@@ -8,7 +8,7 @@ Gluon's releases are managed using `Git tags`_. If you are just getting
 started with Gluon we recommend to use the latest stable release of Gluon.
 
 Take a look at the `list of gluon releases`_ and notice the latest release,
-e.g. *v2022.1.2*. Always get Gluon using git and don't try to download it
+e.g. *v2022.1.3*. Always get Gluon using git and don't try to download it
 as a Zip archive as the archive will be missing version information.
 
 Please keep in mind that there is no "default Gluon" build; a site configuration
@@ -50,7 +50,7 @@ Building the images
 -------------------
 
 To build Gluon, first check out the repository. Replace *RELEASE* with the
-version you'd like to checkout, e.g. *v2022.1.2*.
+version you'd like to checkout, e.g. *v2022.1.3*.
 
 ::