diff --git a/docs/user/supported_devices.rst b/docs/user/supported_devices.rst index f9cf9691..919e70e9 100644 --- a/docs/user/supported_devices.rst +++ b/docs/user/supported_devices.rst @@ -44,6 +44,7 @@ ath79-generic - OM2P-HS (v1, v2, v3, v4) - OM2P-LC - OM5P + - OM5P-AC (v1) * Plasma Cloud diff --git a/patches/openwrt/0009-ath79-Add-support-for-OpenMesh-OM5P-AC-v1.patch b/patches/openwrt/0009-ath79-Add-support-for-OpenMesh-OM5P-AC-v1.patch new file mode 100644 index 00000000..e5fbe2d8 --- /dev/null +++ b/patches/openwrt/0009-ath79-Add-support-for-OpenMesh-OM5P-AC-v1.patch @@ -0,0 +1,348 @@ +From: Sven Eckelmann +Date: Mon, 23 Nov 2020 13:41:34 +0100 +Subject: ath79: Add support for OpenMesh OM5P-AC v1 + +Device specifications: +====================== + +* Qualcomm/Atheros QCA9558 ver 1 rev 0 +* 720/600/240 MHz (CPU/DDR/AHB) +* 128 MB of RAM +* 16 MB of SPI NOR flash + - 2x 7 MB available; but one of the 7 MB regions is the recovery image +* 2T2R 2.4 GHz Wi-Fi (11n) +* 2T2R 5 GHz Wi-Fi (11ac) +* 6x GPIO-LEDs (3x wifi, 2x ethernet, 1x power) +* external h/w watchdog (enabled by default)) +* TTL pins are on board (arrow points to VCC, then follows: GND, TX, RX) +* TI tmp423 (package kmod-hwmon-tmp421) for temperature monitoring +* 2x ethernet + - eth0 + + AR8035 ethernet PHY (RGMII) + + 10/100/1000 Mbps Ethernet + + 802.3af POE + + used as LAN interface + - eth1 + + AR8035 ethernet PHY (SGMII) + + 10/100/1000 Mbps Ethernet + + 18-24V passive POE (mode B) + + used as WAN interface +* 12-24V 1A DC +* internal antennas + +Flashing instructions: +====================== + +Various methods can be used to install the actual image on the flash. +Two easy ones are: + +ap51-flash +---------- + +The tool ap51-flash (https://github.com/ap51-flash/ap51-flash) should be +used to transfer the image to the u-boot when the device boots up. + +initramfs from TFTP +------------------- + +The serial console must be used to access the u-boot shell during bootup. +It can then be used to first boot up the initramfs image from a TFTP server +(here with the IP 192.168.1.21): + + setenv serverip 192.168.1.21 + setenv ipaddr 192.168.1.1 + tftpboot 0c00000 .bin && bootm $fileaddr + +The actual sysupgrade image can then be transferred (on the LAN port) to the +device via + + scp .bin root@192.168.1.1:/tmp/ + +On the device, the sysupgrade must then be started using + + sysupgrade -n /tmp/.bin + +Signed-off-by: Sven Eckelmann +(cherry picked from commit 97f561725962ddb8823b2e01563a0f37f7930477) + +diff --git a/package/boot/uboot-envtools/files/ath79 b/package/boot/uboot-envtools/files/ath79 +index f4ccb2faea4e5e6202413a76cd137065dc535fe7..08c066c3494e8ea6fa5db639e11caa6406f3c6f9 100644 +--- a/package/boot/uboot-envtools/files/ath79 ++++ b/package/boot/uboot-envtools/files/ath79 +@@ -58,6 +58,7 @@ openmesh,mr900-v2|\ + openmesh,mr1750-v1|\ + openmesh,mr1750-v2|\ + openmesh,om5p|\ ++openmesh,om5p-ac-v1|\ + openmesh,om5p-ac-v2|\ + samsung,wam250|\ + ubnt,nanostation-m|\ +diff --git a/target/linux/ath79/dts/qca9558_openmesh_om5p-ac-v1.dts b/target/linux/ath79/dts/qca9558_openmesh_om5p-ac-v1.dts +new file mode 100644 +index 0000000000000000000000000000000000000000..ae69992abf583168a0ab9a017a9aee33758dd4d8 +--- /dev/null ++++ b/target/linux/ath79/dts/qca9558_openmesh_om5p-ac-v1.dts +@@ -0,0 +1,199 @@ ++// SPDX-License-Identifier: GPL-2.0-or-later OR MIT ++ ++#include "qca955x.dtsi" ++ ++#include ++#include ++ ++/ { ++ compatible = "openmesh,om5p-ac-v1", "qca,qca9558"; ++ model = "OpenMesh OM5P-AC v1"; ++ ++ chosen { ++ /delete-property/ bootargs; ++ }; ++ ++ aliases { ++ serial0 = &uart; ++ led-boot = &led_power_blue; ++ led-failsafe = &led_power_blue; ++ led-running = &led_power_blue; ++ led-upgrade = &led_power_blue; ++ label-mac-device = ð0; ++ }; ++ ++ leds { ++ compatible = "gpio-leds"; ++ ++ led_power_blue: power_blue { ++ label = "blue:power"; ++ gpios = <&gpio 18 GPIO_ACTIVE_LOW>; ++ default-state = "on"; ++ }; ++ ++ wan_blue { ++ label = "blue:wan"; ++ gpios = <&gpio 19 GPIO_ACTIVE_LOW>; ++ }; ++ ++ lan_blue { ++ label = "blue:lan"; ++ gpios = <&gpio 20 GPIO_ACTIVE_LOW>; ++ }; ++ ++ wifi_green { ++ label = "green:wifi"; ++ gpios = <&gpio 21 GPIO_ACTIVE_LOW>; ++ linux,default-trigger = "phy0tpt"; ++ }; ++ ++ wifi_yellow { ++ label = "yellow:wifi"; ++ gpios = <&gpio 22 GPIO_ACTIVE_LOW>; ++ }; ++ ++ wifi_red { ++ label = "red:wifi"; ++ gpios = <&gpio 23 GPIO_ACTIVE_LOW>; ++ }; ++ }; ++ ++ i2c { ++ compatible = "i2c-gpio"; ++ gpios = <&gpio 11 GPIO_ACTIVE_HIGH /* sda */ ++ &gpio 12 GPIO_ACTIVE_HIGH /* scl */ ++ >; ++ #address-cells = <1>; ++ #size-cells = <0>; ++ ++ i2c-gpio,scl-open-drain; ++ i2c-gpio,sda-open-drain; ++ ++ tmp423a@4c { ++ compatible = "ti,tmp423"; ++ reg = <0x4c>; ++ }; ++ }; ++ ++ watchdog { ++ compatible = "linux,wdt-gpio"; ++ gpios = <&gpio 17 GPIO_ACTIVE_LOW>; ++ hw_algo = "toggle"; ++ /* hw_margin_ms is actually 300s but driver limits it to 60s */ ++ hw_margin_ms = <60000>; ++ always-running; ++ }; ++}; ++ ++&spi { ++ status = "okay"; ++ ++ flash@0 { ++ compatible = "jedec,spi-nor"; ++ reg = <0>; ++ spi-max-frequency = <40000000>; ++ ++ /* partitions are passed via bootloader */ ++ partitions { ++ compatible = "fixed-partitions"; ++ #address-cells = <1>; ++ #size-cells = <1>; ++ ++ partition@0 { ++ label = "u-boot"; ++ reg = <0x000000 0x040000>; ++ read-only; ++ }; ++ ++ partition@40000 { ++ label = "u-boot-env"; ++ reg = <0x040000 0x010000>; ++ }; ++ ++ partition@50000 { ++ label = "custom"; ++ reg = <0x050000 0x060000>; ++ read-only; ++ }; ++ ++ partition@b0000 { ++ label = "inactive"; ++ reg = <0x0b0000 0x7a0000>; ++ }; ++ ++ partition@850000 { ++ label = "inactive2"; ++ reg = <0x850000 0x7a0000>; ++ }; ++ ++ art: partition@ff0000 { ++ label = "ART"; ++ reg = <0xff0000 0x010000>; ++ read-only; ++ }; ++ }; ++ }; ++}; ++ ++&mdio0 { ++ status = "okay"; ++ ++ phy-mask = <0x6>; ++ ++ phy1: ethernet-phy@1 { ++ reg = <1>; ++ eee-broken-100tx; ++ eee-broken-1000t; ++ }; ++ ++ phy2: ethernet-phy@2 { ++ reg = <2>; ++ eee-broken-100tx; ++ eee-broken-1000t; ++ at803x-override-sgmii-link-check; ++ }; ++}; ++ ++ð0 { ++ status = "okay"; ++ ++ pll-data = <0x82000101 0x80000101 0x80001313>; ++ ++ mtd-mac-address = <&art 0x0>; ++ ++ phy-mode = "rgmii-id"; ++ phy-handle = <&phy1>; ++ ++ gmac-config { ++ device = <&gmac>; ++ rgmii-enabled = <1>; ++ rxd-delay = <3>; ++ rxdv-delay = <3>; ++ txd-delay = <0>; ++ txen-delay = <0>; ++ }; ++}; ++ ++ð1 { ++ status = "okay"; ++ ++ pll-data = <0x03000101 0x80000101 0x80001313>; ++ ++ mtd-mac-address = <&art 0x6>; ++ ++ qca955x-sgmii-fixup; ++ ++ phy-handle = <&phy2>; ++}; ++ ++&wmac { ++ status = "okay"; ++ ++ mtd-cal-data = <&art 0x1000>; ++ mtd-mac-address = <&art 0x0>; ++ mac-address-increment = <2>; ++}; ++ ++&pcie1 { ++ status = "okay"; ++}; +diff --git a/target/linux/ath79/generic/base-files/etc/board.d/01_leds b/target/linux/ath79/generic/base-files/etc/board.d/01_leds +index f5384e7fc3859bab1d6c0422de7e173fad3abae2..68ea4281a56bff44147c7792990cc1e26bc10a7c 100755 +--- a/target/linux/ath79/generic/base-files/etc/board.d/01_leds ++++ b/target/linux/ath79/generic/base-files/etc/board.d/01_leds +@@ -257,6 +257,10 @@ openmesh,om2p-v1) + ucidef_set_led_netdev "wan" "WAN" "blue:wan" "eth0" + ucidef_set_led_switch "lan" "LAN" "blue:lan" "switch0" "0x10" + ;; ++openmesh,om5p-ac-v1) ++ ucidef_set_led_netdev "lan" "LAN" "blue:lan" "eth0" ++ ucidef_set_led_netdev "wan" "WAN" "blue:wan" "eth1" ++ ;; + pcs,cr3000) + ucidef_set_led_netdev "wan" "WAN" "blue:wan" "eth1" + ucidef_set_led_switch "lan1" "LAN1" "blue:lan1" "switch0" "0x04" +diff --git a/target/linux/ath79/generic/base-files/etc/hotplug.d/firmware/11-ath10k-caldata b/target/linux/ath79/generic/base-files/etc/hotplug.d/firmware/11-ath10k-caldata +index b70a87054b10fbe708d9aa8603ecdb591fc92591..00dbeec6a51457c23ba97aa627bf14acd8349f74 100644 +--- a/target/linux/ath79/generic/base-files/etc/hotplug.d/firmware/11-ath10k-caldata ++++ b/target/linux/ath79/generic/base-files/etc/hotplug.d/firmware/11-ath10k-caldata +@@ -158,6 +158,10 @@ case "$FIRMWARE" in + ;; + "ath10k/cal-pci-0000:01:00.0.bin") + case $board in ++ openmesh,om5p-ac-v1) ++ caldata_extract "ART" 0x5000 0x844 ++ ath10k_patch_mac $(macaddr_add $(cat /sys/class/net/eth0/address) +16) ++ ;; + sitecom,wlr-8100) + caldata_extract "art" 0x5000 0x844 + ath10k_patch_mac $(macaddr_add $(mtd_get_mac_ascii u-boot-env ethaddr) +1) +diff --git a/target/linux/ath79/generic/base-files/lib/upgrade/platform.sh b/target/linux/ath79/generic/base-files/lib/upgrade/platform.sh +index e9203f3a5b624e1e9b46c474e95e27583bcb6765..2cac42c9feaed3c0360091a5b7959e741d4a0473 100644 +--- a/target/linux/ath79/generic/base-files/lib/upgrade/platform.sh ++++ b/target/linux/ath79/generic/base-files/lib/upgrade/platform.sh +@@ -82,6 +82,7 @@ platform_do_upgrade() { + openmesh,om2p-hs-v4|\ + openmesh,om2p-lc|\ + openmesh,om5p|\ ++ openmesh,om5p-ac-v1|\ + openmesh,om5p-ac-v2) + PART_NAME="inactive" + platform_do_upgrade_openmesh "$1" +diff --git a/target/linux/ath79/image/generic.mk b/target/linux/ath79/image/generic.mk +index 8113b515368b253d0812fbbb86278e7fde63a038..75dbc1c03b5c42b81463bf7c4ddd4aa5803afd69 100644 +--- a/target/linux/ath79/image/generic.mk ++++ b/target/linux/ath79/image/generic.mk +@@ -1810,6 +1810,17 @@ define Device/openmesh_om5p + endef + TARGET_DEVICES += openmesh_om5p + ++define Device/openmesh_om5p-ac-v1 ++ $(Device/openmesh_common_64k) ++ SOC := qca9558 ++ DEVICE_MODEL := OM5P-AC ++ DEVICE_VARIANT := v1 ++ DEVICE_PACKAGES += kmod-ath10k-ct ath10k-firmware-qca988x-ct ++ OPENMESH_CE_TYPE := OM5PAC ++ SUPPORTED_DEVICES += om5p-ac ++endef ++TARGET_DEVICES += openmesh_om5p-ac-v1 ++ + define Device/openmesh_om5p-ac-v2 + $(Device/openmesh_common_64k) + SOC := qca9558 diff --git a/targets/ath79-generic b/targets/ath79-generic index 63f0d53e..0c11bc8c 100644 --- a/targets/ath79-generic +++ b/targets/ath79-generic @@ -193,6 +193,13 @@ device('openmesh-om5p', 'openmesh_om5p', { factory = false, }) +device('openmesh-om5p-ac-v1', 'openmesh_om5p-ac-v1', { + packages = ATH10K_PACKAGES_QCA9880, + factory = false, + -- old name from OpenWrt 19.07.x + manifest_aliases = {'openmesh-om5p-ac'}, +}) + -- Plasma Cloud