diff --git a/patches/lede/0045-ar71xx-add-support-for-TP-Link-TL-WR1043N-v5.patch b/patches/lede/0045-ar71xx-add-support-for-TP-Link-TL-WR1043N-v5.patch new file mode 100644 index 00000000..36d75985 --- /dev/null +++ b/patches/lede/0045-ar71xx-add-support-for-TP-Link-TL-WR1043N-v5.patch @@ -0,0 +1,367 @@ +From: Tim Thorpe +Date: Mon, 25 Sep 2017 04:38:49 -0500 +Subject: ar71xx: add support for TP-Link TL-WR1043N v5 + +TP-Link TL-WR1043N v5 appears to be identical to the TL-WR1043ND v4, +except that the USB port has been removed and there is no longer a +removable antenna option. + +The software is more in line with the Archer series in that it uses a +nested bootloader scheme. + +Specifications: + + - QCA9563 at 775 MHz + - 64 MB RAM + - 16 MB flash + - 3 (non-detachable) Antennas / 450 Mbit + - 1x/4x WAN/LAN Gbps Ethernet (QCA8337) + - reset and Wi-Fi buttons + +Signed-off-by: Tim Thorpe +Signed-off-by: Ludwig Thomeczek + +diff --git a/target/linux/ar71xx/base-files/etc/board.d/01_leds b/target/linux/ar71xx/base-files/etc/board.d/01_leds +index e1efb561b33da4dcfcb82ee953cd888170476dfb..e67b5e38561e841b88e486341950c52e1d454322 100755 +--- a/target/linux/ar71xx/base-files/etc/board.d/01_leds ++++ b/target/linux/ar71xx/base-files/etc/board.d/01_leds +@@ -666,14 +666,20 @@ tl-wr1043nd-v2) + ucidef_set_led_usbdev "usb" "USB" "tp-link:green:usb" "1-1" + ucidef_set_led_wlan "wlan" "WLAN" "tp-link:green:wlan" "phy0tpt" + ;; ++tl-wr1043n-v5|\ + tl-wr1043nd-v4) +- ucidef_set_led_usbdev "usb" "USB" "tp-link:green:usb" "1-1" + ucidef_set_led_wlan "wlan" "WLAN" "tp-link:green:wlan" "phy0tpt" + ucidef_set_led_switch "wan" "WAN" "tp-link:green:wan" "switch0" "0x20" + ucidef_set_led_switch "lan1" "LAN1" "tp-link:green:lan1" "switch0" "0x10" + ucidef_set_led_switch "lan2" "LAN2" "tp-link:green:lan2" "switch0" "0x08" + ucidef_set_led_switch "lan3" "LAN3" "tp-link:green:lan3" "switch0" "0x04" + ucidef_set_led_switch "lan4" "LAN4" "tp-link:green:lan4" "switch0" "0x02" ++ ++ case "$board" in ++ tl-wr1043nd-v4) ++ ucidef_set_led_usbdev "usb" "USB" "tp-link:green:usb" "1-1" ++ ;; ++ esac + ;; + tl-wr2543n) + ucidef_set_led_usbdev "usb" "USB" "tp-link:green:usb" "1-1" +diff --git a/target/linux/ar71xx/base-files/etc/board.d/02_network b/target/linux/ar71xx/base-files/etc/board.d/02_network +index 24ead87850f13346ea4be4f9bfb5582e64a2c4ad..27a0266923743d4856919b9c8772a40e59febe83 100755 +--- a/target/linux/ar71xx/base-files/etc/board.d/02_network ++++ b/target/linux/ar71xx/base-files/etc/board.d/02_network +@@ -237,7 +237,8 @@ ar71xx_setup_interfaces() + mynet-n750|\ + sr3200|\ + wndr3700v4|\ +- wndr4300) ++ wndr4300|\ ++ tl-wr1043n-v5) + ucidef_add_switch "switch0" \ + "0@eth0" "1:lan" "2:lan" "3:lan" "4:lan" "5:wan" + ;; +@@ -481,6 +482,7 @@ ar71xx_setup_macs() + lan_mac=$(mtd_get_mac_binary caldata 0) + wan_mac=$(mtd_get_mac_binary caldata 6) + ;; ++ tl-wr1043n-v5|\ + tl-wr1043nd-v4) + lan_mac=$(mtd_get_mac_binary product-info 8) + wan_mac=$(macaddr_add "$lan_mac" 1) +diff --git a/target/linux/ar71xx/base-files/etc/diag.sh b/target/linux/ar71xx/base-files/etc/diag.sh +index 38cc5d7853c79f2a7800a387310a95abb3b4de1b..61db387c9ecefd7090c25a5f5d75fdbf65a44d65 100644 +--- a/target/linux/ar71xx/base-files/etc/diag.sh ++++ b/target/linux/ar71xx/base-files/etc/diag.sh +@@ -359,6 +359,7 @@ get_status_led() { + tl-wdr3320-v2|\ + tl-wdr3500|\ + tl-wr1041n-v2|\ ++ tl-wr1043n-v5|\ + tl-wr1043nd|\ + tl-wr1043nd-v2|\ + tl-wr1043nd-v4|\ +diff --git a/target/linux/ar71xx/base-files/lib/ar71xx.sh b/target/linux/ar71xx/base-files/lib/ar71xx.sh +index 46711af2b26159ebb105fa97cd8a85bb9c00911a..de6042b202bbd07e64833743933be1cbaf1ed495 100755 +--- a/target/linux/ar71xx/base-files/lib/ar71xx.sh ++++ b/target/linux/ar71xx/base-files/lib/ar71xx.sh +@@ -944,6 +944,9 @@ ar71xx_board_detect() { + *"TL-WR1043ND v4") + name="tl-wr1043nd-v4" + ;; ++ *"TL-WR1043N v5") ++ name="tl-wr1043n-v5" ++ ;; + *TL-WR2543N*) + name="tl-wr2543n" + ;; +diff --git a/target/linux/ar71xx/base-files/lib/upgrade/platform.sh b/target/linux/ar71xx/base-files/lib/upgrade/platform.sh +index e65f6e2f7594ba373fbc9a26620859b9005c8532..e748a2559cdb3a0ca6618429b0f613a656e39388 100755 +--- a/target/linux/ar71xx/base-files/lib/upgrade/platform.sh ++++ b/target/linux/ar71xx/base-files/lib/upgrade/platform.sh +@@ -261,6 +261,7 @@ platform_check_image() { + tew-712br|\ + tew-732br|\ + tew-823dru|\ ++ tl-wr1043n-v5|\ + unifi-outdoor|\ + unifiac-lite|\ + unifiac-pro|\ +diff --git a/target/linux/ar71xx/config-4.4 b/target/linux/ar71xx/config-4.4 +index c82fcf09228be7063967f2517e0942651234afb8..57b6d2e541d7ef9dea8570ba8de72164d97b9775 100644 +--- a/target/linux/ar71xx/config-4.4 ++++ b/target/linux/ar71xx/config-4.4 +@@ -181,6 +181,7 @@ CONFIG_ATH79_MACH_TL_WR1041N_V2=y + CONFIG_ATH79_MACH_TL_WR1043ND=y + CONFIG_ATH79_MACH_TL_WR1043ND_V2=y + CONFIG_ATH79_MACH_TL_WR1043ND_V4=y ++CONFIG_ATH79_MACH_TL_WR1043N_V5=y + CONFIG_ATH79_MACH_TL_WR2543N=y + CONFIG_ATH79_MACH_TL_WR703N=y + CONFIG_ATH79_MACH_TL_WR720N_V3=y +diff --git a/target/linux/ar71xx/files/arch/mips/ath79/Kconfig.openwrt b/target/linux/ar71xx/files/arch/mips/ath79/Kconfig.openwrt +index fb2afb965c4641df7cdcaf0920f2d56b3717fa9b..7ad5419f51ec9909d8b59f33178221a7d81ec184 100644 +--- a/target/linux/ar71xx/files/arch/mips/ath79/Kconfig.openwrt ++++ b/target/linux/ar71xx/files/arch/mips/ath79/Kconfig.openwrt +@@ -1564,6 +1564,15 @@ config ATH79_MACH_TL_WR1041N_V2 + select ATH79_DEV_USB + select ATH79_DEV_WMAC + ++config ATH79_MACH_TL_WR1043N_V5 ++ bool "TP-LINK TL-WR1043N v5 support" ++ select SOC_QCA956X ++ select ATH79_DEV_ETH ++ select ATH79_DEV_GPIO_BUTTONS ++ select ATH79_DEV_LEDS_GPIO ++ select ATH79_DEV_M25P80 ++ select ATH79_DEV_WMAC ++ + config ATH79_MACH_TL_WR1043ND + bool "TP-LINK TL-WR1043ND support" + select SOC_AR913X +diff --git a/target/linux/ar71xx/files/arch/mips/ath79/mach-tl-wr1043nd-v4.c b/target/linux/ar71xx/files/arch/mips/ath79/mach-tl-wr1043nd-v4.c +index b1539c5d71a61806b88c50f1a78f6a27d98d7a2d..450819a9e6baa997dab2dfba4c5a19261aae9664 100644 +--- a/target/linux/ar71xx/files/arch/mips/ath79/mach-tl-wr1043nd-v4.c ++++ b/target/linux/ar71xx/files/arch/mips/ath79/mach-tl-wr1043nd-v4.c +@@ -5,6 +5,7 @@ + * Copyright (C) 2016 Matthias Schiffer + * Copyright (C) 2016 Andreas Ziegler + * Copyright (C) 2016 Ludwig Thomeczek ++ * Copyright (C) 2017 Tim Thorpe + * + * Derived from: mach-dir-869-a1.c + * +@@ -62,6 +63,8 @@ + #define TL_WR1043_V4_EEPROM_ADDR 0x1fff0000 + #define TL_WR1043_V4_WMAC_CALDATA_OFFSET 0x1000 + ++#define TL_WR1043N_V5_MAC_LOCATION 0x1ff00008 ++ + static struct gpio_led tl_wr1043nd_v4_leds_gpio[] __initdata = { + { + .name = "tp-link:green:wps", +@@ -188,3 +191,82 @@ static void __init tl_wr1043nd_v4_setup(void) + + MIPS_MACHINE(ATH79_MACH_TL_WR1043ND_V4, "TL-WR1043ND-v4", + "TP-LINK TL-WR1043ND v4", tl_wr1043nd_v4_setup); ++ ++static struct gpio_led tl_wr1043n_v5_leds_gpio[] __initdata = { ++ { ++ .name = "tp-link:green:wps", ++ .gpio = TL_WR1043_V4_GPIO_LED_WPS, ++ .active_low = 1, ++ }, ++ { ++ .name = "tp-link:green:system", ++ .gpio = TL_WR1043_V4_GPIO_LED_SYSTEM, ++ .active_low = 1, ++ }, ++ { ++ .name = "tp-link:green:wlan", ++ .gpio = TL_WR1043_V4_GPIO_LED_WLAN, ++ .active_low = 1, ++ }, ++ { ++ .name = "tp-link:green:wan", ++ .gpio = TL_WR1043_V4_GPIO_LED_WAN, ++ .active_low = 1, ++ }, ++ { ++ .name = "tp-link:green:lan1", ++ .gpio = TL_WR1043_V4_GPIO_LED_LAN1, ++ .active_low = 1, ++ }, ++ { ++ .name = "tp-link:green:lan2", ++ .gpio = TL_WR1043_V4_GPIO_LED_LAN2, ++ .active_low = 1, ++ }, ++ { ++ .name = "tp-link:green:lan3", ++ .gpio = TL_WR1043_V4_GPIO_LED_LAN3, ++ .active_low = 1, ++ }, ++ { ++ .name = "tp-link:green:lan4", ++ .gpio = TL_WR1043_V4_GPIO_LED_LAN4, ++ .active_low = 1, ++ }, ++}; ++ ++/* The 1043Nv5 is identical to the 1043NDv4, ++ * only missing the usb and small firmware layout changes */ ++static void __init tl_wr1043nv5_setup(void) ++{ ++ u8 *art = (u8 *) KSEG1ADDR(TL_WR1043_V4_EEPROM_ADDR); ++ u8 *mac = (u8 *) KSEG1ADDR(TL_WR1043N_V5_MAC_LOCATION); ++ ++ ath79_register_m25p80(NULL); ++ ++ ath79_register_leds_gpio(-1, ARRAY_SIZE(tl_wr1043n_v5_leds_gpio), ++ tl_wr1043n_v5_leds_gpio); ++ ath79_register_gpio_keys_polled(-1, TL_WR1043_V4_KEYS_POLL_INTERVAL, ++ ARRAY_SIZE(tl_wr1043nd_v4_gpio_keys), ++ tl_wr1043nd_v4_gpio_keys); ++ ++ platform_device_register(&ath79_mdio0_device); ++ ++ mdiobus_register_board_info(tl_wr1043nd_v4_mdio0_info, ++ ARRAY_SIZE(tl_wr1043nd_v4_mdio0_info)); ++ ++ ath79_register_wmac(art + TL_WR1043_V4_WMAC_CALDATA_OFFSET, mac); ++ ++ ath79_init_mac(ath79_eth0_data.mac_addr, mac, 0); ++ ++ /* GMAC0 is connected to an AR8337 switch */ ++ ath79_eth0_data.phy_if_mode = PHY_INTERFACE_MODE_SGMII; ++ ath79_eth0_data.speed = SPEED_1000; ++ ath79_eth0_data.duplex = DUPLEX_FULL; ++ ath79_eth0_data.phy_mask = BIT(0); ++ ath79_eth0_data.mii_bus_dev = &ath79_mdio0_device.dev; ++ ath79_register_eth(0); ++} ++ ++MIPS_MACHINE(ATH79_MACH_TL_WR1043N_V5, "TL-WR1043N-v5", "TP-LINK TL-WR1043N v5", ++ tl_wr1043nv5_setup); +diff --git a/target/linux/ar71xx/files/arch/mips/ath79/machtypes.h b/target/linux/ar71xx/files/arch/mips/ath79/machtypes.h +index 8864e0deda57b926e88dceebd26056a2f8099380..9cb4a7f2e1df641232289721b676a9b0149c76e5 100644 +--- a/target/linux/ar71xx/files/arch/mips/ath79/machtypes.h ++++ b/target/linux/ar71xx/files/arch/mips/ath79/machtypes.h +@@ -214,6 +214,7 @@ enum ath79_mach_type { + ATH79_MACH_TL_WDR6500_V2, /* TP-LINK TL-WDR6500 v2 */ + ATH79_MACH_TL_WPA8630, /* TP-Link TL-WPA8630 */ + ATH79_MACH_TL_WR1041N_V2, /* TP-LINK TL-WR1041N v2 */ ++ ATH79_MACH_TL_WR1043N_V5, /* TP-LINK TL-WR1043N v5 */ + ATH79_MACH_TL_WR1043ND, /* TP-LINK TL-WR1043ND */ + ATH79_MACH_TL_WR1043ND_V2, /* TP-LINK TL-WR1043ND v2 */ + ATH79_MACH_TL_WR1043ND_V4, /* TP-LINK TL-WR1043ND v4 */ +diff --git a/target/linux/ar71xx/image/tp-link.mk b/target/linux/ar71xx/image/tp-link.mk +index 6933654e575a1ef2c92e4c656696a479cba4c594..5be7cbfbd4ab7d73d679d52d2581459250e04302 100644 +--- a/target/linux/ar71xx/image/tp-link.mk ++++ b/target/linux/ar71xx/image/tp-link.mk +@@ -858,7 +858,22 @@ define Device/tl-wr1043nd-v4 + IMAGE/sysupgrade.bin := append-rootfs | tplink-safeloader sysupgrade + IMAGE/factory.bin := append-rootfs | tplink-safeloader factory + endef +-TARGET_DEVICES += tl-wr1043nd-v1 tl-wr1043nd-v2 tl-wr1043nd-v3 tl-wr1043nd-v4 ++ ++define Device/tl-wr1043n-v5 ++ DEVICE_TITLE := TP-LINK TL-WR1043N v5 ++ BOARDNAME := TL-WR1043N-v5 ++ SUPPORTED_DEVICES := tl-wr1043n-v5 ++ DEVICE_PROFILE := TLWR1043 ++ MTDPARTS := spi0.0:128k(factory-uboot)ro,128k(u-boot)ro,15104k(firmware),128k(product-info)ro,640k(config)ro,64k(partition-table)ro,128k(logs)ro,64k(art)ro ++ IMAGE_SIZE := 15104k ++ KERNEL := kernel-bin | patch-cmdline | lzma | uImageArcher lzma ++ IMAGES := sysupgrade.bin factory.bin ++ IMAGE/sysupgrade.bin := append-rootfs | tplink-safeloader sysupgrade | \ ++ append-metadata | check-size $$$$(IMAGE_SIZE) ++ IMAGE/factory.bin := append-rootfs | tplink-safeloader factory ++ TPLINK_BOARD_NAME := TLWR1043NV5 ++endef ++TARGET_DEVICES += tl-wr1043nd-v1 tl-wr1043nd-v2 tl-wr1043nd-v3 tl-wr1043nd-v4 tl-wr1043n-v5 + + define Device/tl-wr2543-v1 + $(Device/tplink-8mlzma) +diff --git a/target/linux/ar71xx/mikrotik/config-default b/target/linux/ar71xx/mikrotik/config-default +index 376835a703f91532300d0dd7c8ef66704acc6e05..f5af38a726f5ce33391223a4dbeb2fc0a8cac613 100644 +--- a/target/linux/ar71xx/mikrotik/config-default ++++ b/target/linux/ar71xx/mikrotik/config-default +@@ -143,6 +143,7 @@ CONFIG_ATH79_MACH_RBSXTLITE=y + # CONFIG_ATH79_MACH_TL_WDR6500_V2 is not set + # CONFIG_ATH79_MACH_TL_WPA8630 is not set + # CONFIG_ATH79_MACH_TL_WR1041N_V2 is not set ++# CONFIG_ATH79_MACH_TL_WR1043N_V5 is not set + # CONFIG_ATH79_MACH_TL_WR1043ND is not set + # CONFIG_ATH79_MACH_TL_WR1043ND_V2 is not set + # CONFIG_ATH79_MACH_TL_WR1043ND_V4 is not set +diff --git a/target/linux/ar71xx/nand/config-default b/target/linux/ar71xx/nand/config-default +index 62be218e33cc6366ea89f363983f36523c419650..5c18f5d594d625f91ff10e21ddc5af2b3b4d768f 100644 +--- a/target/linux/ar71xx/nand/config-default ++++ b/target/linux/ar71xx/nand/config-default +@@ -52,6 +52,7 @@ + # CONFIG_ATH79_MACH_TL_WDR3500 is not set + # CONFIG_ATH79_MACH_TL_WDR4300 is not set + # CONFIG_ATH79_MACH_TL_WR1041N_V2 is not set ++# CONFIG_ATH79_MACH_TL_WR1043N_V5 is not set + # CONFIG_ATH79_MACH_TL_WR1043ND is not set + # CONFIG_ATH79_MACH_TL_WR1043ND_V4 is not set + # CONFIG_ATH79_MACH_TL_WR2543N is not set +diff --git a/tools/firmware-utils/src/tplink-safeloader.c b/tools/firmware-utils/src/tplink-safeloader.c +index 24684268b1a3fe491c4eb876a5ebefc700f2e56e..478d5d8e9b43bbe37694732c138048c8fe8d807c 100644 +--- a/tools/firmware-utils/src/tplink-safeloader.c ++++ b/tools/firmware-utils/src/tplink-safeloader.c +@@ -478,6 +478,42 @@ static struct device_info boards[] = { + .last_sysupgrade_partition = "file-system" + }, + ++ /** Firmware layout for the TL-WR1043 v5 */ ++ { ++ .id = "TLWR1043NV5", ++ .vendor = "", ++ .support_list = ++ "SupportList:\n" ++ "{product_name:TL-WR1043N,product_ver:5.0.0,special_id:45550000}\n" ++ "{product_name:TL-WR1043N,product_ver:5.0.0,special_id:55530000}\n", ++ .support_trail = '\x00', ++ .soft_ver = "soft_ver:1.0.0\n", ++ .partitions = { ++ {"factory-boot", 0x00000, 0x20000}, ++ {"fs-uboot", 0x20000, 0x20000}, ++ {"os-image", 0x40000, 0x180000}, ++ {"file-system", 0x1c0000, 0xd40000}, ++ {"default-mac", 0xf00000, 0x00200}, ++ {"pin", 0xf00200, 0x00200}, ++ {"device-id", 0xf00400, 0x00100}, ++ {"product-info", 0xf00500, 0x0fb00}, ++ {"soft-version", 0xf10000, 0x01000}, ++ {"extra-para", 0xf11000, 0x01000}, ++ {"support-list", 0xf12000, 0x0a000}, ++ {"profile", 0xf1c000, 0x04000}, ++ {"default-config", 0xf20000, 0x10000}, ++ {"user-config", 0xf30000, 0x40000}, ++ {"qos-db", 0xf70000, 0x40000}, ++ {"certificate", 0xfb0000, 0x10000}, ++ {"partition-table", 0xfc0000, 0x10000}, ++ {"log", 0xfd0000, 0x20000}, ++ {"radio", 0xff0000, 0x10000}, ++ {NULL, 0, 0} ++ }, ++ .first_sysupgrade_partition = "os-image", ++ .last_sysupgrade_partition = "file-system" ++ }, ++ + /** Firmware layout for the RE450 */ + { + .id = "RE450", +@@ -888,7 +924,9 @@ static void build_image(const char *output, + parts[3] = read_file("os-image", kernel_image, false); + parts[4] = read_file("file-system", rootfs_image, add_jffs2_eof); + +- if (strcasecmp(info->id, "ARCHER-C25-V1") == 0) { ++ /* Some devices need the extra-para partition to accept the firmware */ ++ if (strcasecmp(info->id, "ARCHER-C25-V1") == 0 || ++ strcasecmp(info->id, "TLWR1043NV5") == 0) { + const char mdat[11] = {0x00, 0x00, 0x00, 0x02, 0x00, 0x00, 0x00, 0x00, 0x01, 0x00, 0x00}; + parts[5] = put_data("extra-para", mdat, 11); + } diff --git a/targets/ar71xx-generic b/targets/ar71xx-generic index 4a096b14..81451482 100644 --- a/targets/ar71xx-generic +++ b/targets/ar71xx-generic @@ -168,6 +168,7 @@ device tp-link-tl-wr1043n-nd-v1 tl-wr1043nd-v1 device tp-link-tl-wr1043n-nd-v2 tl-wr1043nd-v2 device tp-link-tl-wr1043n-nd-v3 tl-wr1043nd-v3 device tp-link-tl-wr1043n-nd-v4 tl-wr1043nd-v4 +device tp-link-tl-wr1043n-nd-v5 tl-wr1043n-v5 device tp-link-tl-wdr3500-v1 tl-wdr3500-v1 device tp-link-tl-wdr3600-v1 tl-wdr3600-v1