diff --git a/contrib/ci/minimal-site/i18n/de.po b/contrib/ci/minimal-site/i18n/de.po
new file mode 100644
index 00000000..51b8e71c
--- /dev/null
+++ b/contrib/ci/minimal-site/i18n/de.po
@@ -0,0 +1,108 @@
+msgid ""
+msgstr ""
+"Content-Type: text/plain; charset=UTF-8\n"
+"Project-Id-Version: PACKAGE VERSION\n"
+"PO-Revision-Date: 2015-03-19 20:28+0100\n"
+"Last-Translator: Matthias Schiffer <mschiffer@universe-factory.net>\n"
+"Language-Team: German\n"
+"Language: de\n"
+"MIME-Version: 1.0\n"
+"Content-Transfer-Encoding: 8bit\n"
+"Plural-Forms: nplurals=2; plural=(n != 1);\n"
+
+msgid "gluon-config-mode:welcome"
+msgstr ""
+"Willkommen zum Einrichtungsassistenten für deinen neuen Alpha Centauri "
+"Freifunk-Knoten. Fülle das folgende Formular deinen Vorstellungen "
+"entsprechend aus und sende es ab."
+
+msgid "gluon-config-mode:domain"
+msgstr "Domäne"
+
+msgid "gluon-config-mode:domain-select"
+msgstr ""
+"Hier hast du die Möglichkeit, die Mesh-Domäne, in der sich dein Knoten "
+"befindet, auszuwählen. Bitte denke daran, dass sich dein Knoten nur mit den "
+"Knoten der ausgewählten Domäne verbinden kann."
+
+msgid "gluon-config-mode:pubkey"
+msgstr ""
+"<p>Dies ist der öffentliche Schlüssel deines Freifunk-Knotens. Erst nachdem "
+"er auf den Servern des Freifunk-Projektes auf Alpha Centauri eingetragen "
+"wurde, kann sich dein Knoten mit dem Mesh-VPN dort verbinden. Bitte schicke "
+"dazu diesen Schlüssel und den Namen deines Knotens "
+"(<em><%=pcdata(hostname)%></em>) an "
+"<a href=\"mailto:keys@alpha-centauri.freifunk.net?subject="
+"<%= urlencode('Anmeldung: ' .. hostname) %>&amp;body="
+"<%= urlencode('# ' .. hostname .. '\n# ' .. sysconfig.primary_mac .. '\nkey ') %>"
+"%22<%= pubkey %>%22;"
+"<%= urlencode('\n\nIch habe zur Kenntnis genommen, dass der im ') %>"
+"<%= urlencode('Knoten von mir eingetragene Kontakt im Meshnetz ') %>"
+"<%= urlencode('öffentlich abfragbar ist und von beliebigen Diensten ') %>"
+"<%= urlencode('(z.B. der Freifunk-Karte) veröffentlicht werden kann.') %>"
+"<%= urlencode('\n\nGruß, \n\n') %>"
+"\">keys@alpha-centauri.freifunk.net</a>. Deine E-Mail Adresse wird "
+"selbstverständlich vertraulich behandelt und nicht weitergegeben."
+"</p>"
+"<div class=\"the-key\">"
+"# <%= pcdata(hostname) %><br />"
+"<%= pubkey %>"
+"</div>"
+"<p>Dein Knoten startet gerade neu und wird anschließend versuchen, sich mit "
+"anderen Freifunkknoten in seiner Nähe über WLAN sowie über deine"
+"Internetverbindung über das VPN-Gateway zu verbinden.</p>"
+"<p>Vergiss nicht das Netzwerkkabel vom LAN Port in den WAN Port "
+"umzustecken.</p>"
+
+msgid "gluon-config-mode:novpn"
+msgstr ""
+"<p><strong>Du hast ausgewählt die Internetverbindung (Mesh-VPN) nicht zu "
+"nutzen</strong>. Dein Knoten kann also nur dann eine Verbindung zum "
+"Freifunk-Netz aufbauen, wenn andere Freifunk-Knoten in WLAN-Reichweite sind."
+"<p>Bitte schicke uns eine E-Mail mit dem Namen deines Knotens "
+"(<em><%= pcdata(hostname) %></em>) und ein paar Informationen an <a href="
+"\"mailto:freifunk-keys@lists.in-kiel.de?"
+"subject=<%= urlencode('Anmeldung: ' .. hostname) %>&amp;"
+"body=<%= urlencode('# ' .. hostname .. '\n# ' .. sysconfig.primary_mac .. '\n# kein mesh-VPN') %>"
+"<%= urlencode('\n\nIch habe zur Kenntnis genommen, dass der im ') %>"
+"<%= urlencode('Knoten von mir eingetragene Kontakt im Meshnetz ') %>"
+"<%= urlencode('öffentlich abfragbar ist und von beliebigen Diensten ') %>"
+"<%= urlencode('(z.B. der Freifunk-Karte) veröffentlicht werden kann.') %>"
+"<%= urlencode('\n\nGruß, \n\n') %>"
+"\">kontakt@alpha-centauri.freifunk.net</a>. Deine E-Mail Adresse wird "
+"selbstverständlich vertraulich behandelt und nicht weitergegeben.</p>"
+"<p>Dein Knoten <em><%= pcdata(hostname) %></em> startet gerade neu und wird "
+"anschließend versuchen, sich mit anderen Freifunkknoten in seiner Nähe über "
+"WLAN zu verbinden.</p>"
+
+msgid "gluon-config-mode:reboot"
+msgstr ""
+"<p>Weitere Informationen zur "
+"Alpha Centauri Freifunk-Community findest du auf "
+"<a href=\"https://alpha-centauri.freifunk.net/\" target=\"_blank\">unserer "
+"Webseite</a>.</p>"
+"<p>Um zu dieser Konfigurationsseite zurückzugelangen, drücke im normalen "
+"Betrieb für ca. 10 Sekunden den Reset-Button. Das Gerät wird dann im Config "
+"Mode neustarten.</p>"
+"<p>Viel Spaß mit deinem Knoten und der Erkundung von Freifunk!</p>"
+
+# Leave empty to use the default text, which can be found in:
+# package/gluon-config-mode-hostname/i18n/
+msgid "gluon-config-mode:hostname-help"
+msgstr ""
+
+# Leave empty to use the default text, which can be found in:
+# package/gluon-config-mode-geo-location/i18n/
+msgid "gluon-config-mode:geo-location-help"
+msgstr ""
+
+msgid "gluon-config-mode:altitude-label"
+msgstr ""
+
+# Leave empty to use the default text, which can be found in:
+# package/gluon-config-mode-contact-info/i18n/
+msgid "gluon-config-mode:contact-help"
+msgstr ""
+
+msgid "gluon-config-mode:contact-note"
+msgstr ""
diff --git a/contrib/ci/minimal-site/i18n/en.po b/contrib/ci/minimal-site/i18n/en.po
new file mode 100644
index 00000000..eef8bd08
--- /dev/null
+++ b/contrib/ci/minimal-site/i18n/en.po
@@ -0,0 +1,102 @@
+msgid ""
+msgstr ""
+"Content-Type: text/plain; charset=UTF-8\n"
+"Project-Id-Version: PACKAGE VERSION\n"
+"PO-Revision-Date: 2016-02-04 14:28+0100\n"
+"Last-Translator: David Lutz <kpanic@hirnduenger.de>\n"
+"Language-Team: English\n"
+"Language: en\n"
+"MIME-Version: 1.0\n"
+"Content-Transfer-Encoding: 8bit\n"
+"Plural-Forms: nplurals=2; plural=(n != 1);\n"
+
+msgid "gluon-config-mode:welcome"
+msgstr ""
+"Welcome to the setup wizard of your new Freifunk Alpha Centauri node. Please "
+"fill out the following form and submit it."
+
+msgid "gluon-config-mode:domain"
+msgstr "Domain"
+
+msgid "gluon-config-mode:domain-select"
+msgstr ""
+"Here you have the possibility of selecting the mesh domain in which your node "
+"is placed. Please keep in mind that your router only connects with the nodes "
+"of the selected domain."
+
+msgid "gluon-config-mode:pubkey"
+msgstr ""
+"<p>This is your Freifunk node's public key. The node won't be able to "
+"connect to the mesh VPN until the key has been registered on the Freifunk "
+"servers. To register, send the key together with your node's name "
+"(<em><%=pcdata(hostname)%></em>) to "
+"<a href=\"mailto:keys@alpha-centauri.freifunk.net?subject="
+"<%= urlencode('Registration: ' .. hostname) %>&amp;body="
+"<%= urlencode('# ' .. hostname .. '\n# ' .. sysconfig.primary_mac .. '\nkey ') %>"
+"%22<%= pubkey %>%22;"
+"<%= urlencode('\n\nI have taken note that the contact I entered in the ') %>"
+"<%= urlencode('node is publicly available on the Internet and can be ') %>"
+"<%= urlencode('used by any services (e.g. the meshviewer map).') %>"
+"<%= urlencode('\n\nThanks, \n\n') %>"
+"\">keys@alpha-centauri.freifunk.net</a>. Of course, your e-mail address will "
+"be treated confidentially and will not be passed on.</p>"
+"<div class=\"the-key\">"
+" # <%= pcdata(hostname) %><br />"
+"<%= pubkey %>"
+"</div>"
+"<p>Your node <em><%= pcdata(hostname) %></em> is currently rebooting and will "
+"try to connect to other nearby Freifunk nodes via WLAN and to a VPN-gateway "
+"via your internet connection after the reboot is finished.</p>"
+"<p>Don't forget to plug the network cable from the LAN port to the WAN port."
+"</p>"
+
+msgid "gluon-config-mode:novpn"
+msgstr ""
+"<p>You have selected <strong>not</strong> to use the mesh VPN. "
+"Your node will only be able to connect to the Freifunk network if other nodes "
+"in reach already have a connection.</p>"
+"Please send an e-mail with the name of your node "
+"(<em><%=pcdata(hostname)%></em>) and some additional information to "
+"<a href=\"mailto:keys@alpha-centauri.freifunk.net?subject="
+"<%= urlencode('Registration: ' .. hostname) %>&amp;body="
+"<%= urlencode('# ' .. hostname .. '\n# ' .. sysconfig.primary_mac .. '\nkey ') %>"
+"%22<%= pubkey %>%22;"
+"<%= urlencode('\n\nI have taken note that the contact I entered in the ') %>"
+"<%= urlencode('node is publicly available on the Internet and can be ') %>"
+"<%= urlencode('used by any services (e.g. the meshviewer map).') %>"
+"<%= urlencode('\n\nThanks, \n\n') %>"
+"\">keys@alpha-centauri.freifunk.net</a>. Of course, your e-mail address will "
+"be treated confidentially and will not be passed on.</p>"
+"<p>Your node <em><%= pcdata(hostname) %></em> is currently rebooting and will "
+"try to connect to other nearby Freifunk nodes after that.</p>"
+
+msgid "gluon-config-mode:reboot"
+msgstr ""
+"<p>For more information about the Freifunk community on Alpha Centauri, have a "
+"look at <a href=\"https://alpha-centauri.freifunk.net/\" target=\"_blank\">our "
+"homepage</a>.</p>"
+"<p>To get back to this configuration interface, press the reset button for "
+"about 10 seconds during normal operation. The device will then reboot into "
+"config mode.</p>"
+"<p>Have fun with your node and exploring of the Freifunk network!</p>"
+
+# Leave empty to use the default text, which can be found in:
+# package/gluon-config-mode-hostname/i18n/
+msgid "gluon-config-mode:hostname-help"
+msgstr ""
+
+# Leave empty to use the default text, which can be found in:
+# package/gluon-config-mode-geo-location/i18n/
+msgid "gluon-config-mode:geo-location-help"
+msgstr ""
+
+msgid "gluon-config-mode:altitude-label"
+msgstr ""
+
+# Leave empty to use the default text, which can be found in:
+# package/gluon-config-mode-contact-info/i18n/
+msgid "gluon-config-mode:contact-help"
+msgstr ""
+
+msgid "gluon-config-mode:contact-note"
+msgstr ""
diff --git a/contrib/ci/minimal-site/i18n/fr.po b/contrib/ci/minimal-site/i18n/fr.po
new file mode 100644
index 00000000..ba0f43a4
--- /dev/null
+++ b/contrib/ci/minimal-site/i18n/fr.po
@@ -0,0 +1,80 @@
+msgid ""
+msgstr ""
+"Content-Type: text/plain; charset=UTF-8\n"
+"Project-Id-Version: PACKAGE VERSION\n"
+"PO-Revision-Date: 2015-08-06 20:28+0100\n"
+"Last-Translator: Tobias Bernot <tqbs@airmail.cc>\n"
+"Language-Team: French\n"
+"Language: fr\n"
+"MIME-Version: 1.0\n"
+"Content-Transfer-Encoding: 8bit\n"
+"Plural-Forms: nplurals=2; plural=(n != 1);\n"
+
+msgid "gluon-config-mode:welcome"
+msgstr ""
+"Bienvenue dans l'assistant de configuration pour votre nouveau nœud "
+"Freifunk. Remplissez le formulaire suivant en fonction de vos besoins "
+"et enregistrez le."
+
+msgid "gluon-config-mode:domain"
+msgstr "Domaine"
+
+msgid "gluon-config-mode:domain-select"
+msgstr "Ici, vous avez la possibilité de sélectionner le domaine dans lequel "
+"se trouve votre nœud. N'oubliez pas que votre nœud ne peut se connecter "
+"qu'aux nœuds du domaine sélectionné."
+
+msgid "gluon-config-mode:pubkey"
+msgstr ""
+"<p>Ceci est la clé publique de votre nœud Freifunk. Seulment après que la clé "
+"soit entrée sur les serveurs de votre groupe de Freifunk votre nœud pourra se "
+"connecter sur les serveur Mesh-VPN de votre groupe Freifunk. Veuillez envoyer "
+"la clé avec le nom de votre nœud "
+"(<em><%=pcdata(hostname)%></em>) à "
+"<a href=\"mailto:keys@alpha-centauri.freifunk.net?"
+"subject=<%= urlencode('Enregistrement: ' .. hostname) %>&amp;"
+"body=<%= urlencode('# ' .. hostname .. '\n' .. pubkey) %>\">keys@alpha-centauri.freifunk.net</a>."
+"</p>"
+"<div class=\"the-key\">"
+" # <%= pcdata(hostname) %><br />"
+"<%= pubkey %>"
+"</div>"
+
+msgid "gluon-config-mode:novpn"
+msgstr ""
+"<p>Vous avez choisi de <strong>ne pas utiliser</strong> "
+"le réseau VPN. Votre nœud ne pourra se connecter au réseau Freifunk que si "
+"d'autres nœuds à portée ont déjà une connexion.</p>"
+
+msgid "gluon-config-mode:reboot"
+msgstr ""
+"<p>Votre nœud <em><%= pcdata(hostname) %></em> es en train de redémarrer et "
+"va ensuite éssayer de se connecter avec les autres nœuds du réseau Freifunk "
+"Vous pourrez trouver plus d'informations sur votre groupe Freifunk sur la page "
+"<a href=\"https://alpha-centauri.freifunk.net/\" target=\"_blank\"> de ton "
+"groupe </a>.</p>"
+"<p> Pour retrouver cette page de configuration veuillier appuyez pendant le "
+"fonctionement normal pendant 3 Secondes sur le bouton reset. L'appareil va "
+"ensuite redémarer en mode configuration.</p>"
+"<p>Profitez votre de nœud et amusez vous à découvrir le réseau Freifunk!</p>"
+
+# Leave empty to use the default text, which can be found in:
+# package/gluon-config-mode-hostname/i18n/
+msgid "gluon-config-mode:hostname-help"
+msgstr ""
+
+# Leave empty to use the default text, which can be found in:
+# package/gluon-config-mode-geo-location/i18n/
+msgid "gluon-config-mode:geo-location-help"
+msgstr ""
+
+msgid "gluon-config-mode:altitude-label"
+msgstr ""
+
+# Leave empty to use the default text, which can be found in:
+# package/gluon-config-mode-contact-info/i18n/
+msgid "gluon-config-mode:contact-help"
+msgstr ""
+
+msgid "gluon-config-mode:contact-note"
+msgstr ""
diff --git a/contrib/ci/minimal-site/i18n/gluon-site.pot b/contrib/ci/minimal-site/i18n/gluon-site.pot
new file mode 100644
index 00000000..b06b126b
--- /dev/null
+++ b/contrib/ci/minimal-site/i18n/gluon-site.pot
@@ -0,0 +1,35 @@
+msgid ""
+msgstr "Content-Type: text/plain; charset=UTF-8"
+
+msgid "gluon-config-mode:welcome"
+msgstr ""
+
+msgid "gluon-config-mode:domain"
+msgstr ""
+
+msgid "gluon-config-mode:domain-select"
+msgstr ""
+
+msgid "gluon-config-mode:pubkey"
+msgstr ""
+
+msgid "gluon-config-mode:novpn"
+msgstr ""
+
+msgid "gluon-config-mode:reboot"
+msgstr ""
+
+msgid "gluon-config-mode:hostname-help"
+msgstr ""
+
+msgid "gluon-config-mode:geo-location-help"
+msgstr ""
+
+msgid "gluon-config-mode:altitude-label"
+msgstr ""
+
+msgid "gluon-config-mode:contact-help"
+msgstr ""
+
+msgid "gluon-config-mode:contact-note"
+msgstr ""
diff --git a/contrib/ci/minimal-site/modules b/contrib/ci/minimal-site/modules
new file mode 100644
index 00000000..05856ce4
--- /dev/null
+++ b/contrib/ci/minimal-site/modules
@@ -0,0 +1,22 @@
+# This file allows specifying additional repositories to use
+# when building gluon.
+#
+# In most cases, it is not required so don't add it.
+
+##	GLUON_SITE_FEEDS
+#		for each feed name given, add the corresponding PACKAGES_* lines
+#		documented below
+#GLUON_SITE_FEEDS='my_own_packages'
+
+##	PACKAGES_$feedname_REPO
+#		the  git repository from where to clone the package feed
+#PACKAGES_MY_OWN_PACKAGES_REPO=https://github.com/.../my-own-packages.git
+
+
+##	PACKAGES_$feedname_COMMIT
+#		the version/commit of the git repository to clone
+#PACKAGES_MY_OWN_PACKAGES_COMMIT=123456789aabcda1a69b04278e4d38f2a3f57e49
+
+##  PACKAGES_$feedname_BRANCH
+#   the branch to check out
+#PACKAGES_MY_OWN_PACKAGES_BRANCH=my_branch
diff --git a/contrib/ci/minimal-site/site.conf b/contrib/ci/minimal-site/site.conf
new file mode 100644
index 00000000..0a8eb3cb
--- /dev/null
+++ b/contrib/ci/minimal-site/site.conf
@@ -0,0 +1,164 @@
+-- This is an example site configuration for Gluon v2018.2+
+--
+-- Take a look at the documentation located at
+-- https://gluon.readthedocs.io/ for details.
+--
+-- This configuration will not work as is. You're required to make
+-- community specific changes to it!
+{
+  -- Used for generated hostnames, e.g. freifunk-abcdef123456. (optional)
+  -- hostname_prefix = 'freifunk-',
+
+  -- Name of the community.
+  site_name = 'Continious Integration',
+
+  -- Shorthand of the community.
+  site_code = 'ci',
+
+  -- 32 bytes of random data, encoded in hexadecimal
+  -- This data must be unique among all sites and domains!
+  -- Can be generated using: echo $(hexdump -v -n 32 -e '1/1 "%02x"' </dev/urandom)
+  domain_seed = 'e9608c4ff338b920992d629190e9ff11049de1dfc3f299eac07792dfbcda341c',
+
+  -- Prefixes used within the mesh.
+  -- prefix6 is required, prefix4 can be omitted if next_node.ip4
+  -- is not set.
+  prefix4 = '10.0.0.0/20',
+  prefix6 = 'fd::/64',
+
+  -- Timezone of your community.
+  -- See https://openwrt.org/docs/guide-user/base-system/system_configuration#time_zones
+  timezone = 'CET-1CEST,M3.5.0,M10.5.0/3',
+
+  -- List of NTP servers in your community.
+  -- Must be reachable using IPv6!
+--  ntp_servers = {'1.ntp.services.ffxx'},
+
+  -- Wireless regulatory domain of your community.
+  regdom = 'DE',
+
+  -- Wireless configuration for 2.4 GHz interfaces.
+  wifi24 = {
+    -- Wireless channel.
+    channel = 1,
+
+    -- ESSID used for client network.
+    ap = {
+      ssid = 'gluon-ci-ssid',
+      -- disabled = true, -- (optional)
+    },
+
+    mesh = {
+      -- Adjust these values!
+      id = 'ueH3uXjdp', -- usually you don't want users to connect to this mesh-SSID, so use a cryptic id that no one will accidentally mistake for the client WiFi
+      mcast_rate = 12000,
+      -- disabled = true, -- (optional)
+    },
+  },
+
+  -- Wireless configuration for 5 GHz interfaces.
+  -- This should be equal to the 2.4 GHz variant, except
+  -- for channel.
+  wifi5 = {
+    channel = 44,
+    outdoor_chanlist = '100-140',
+    ap = {
+      ssid = 'gluon-ci-ssid',
+    },
+    mesh = {
+      -- Adjust these values!
+      id = 'ueH3uXjdp',
+      mcast_rate = 12000,
+    },
+  },
+
+  mesh = {
+    vxlan = true,
+  },
+
+  -- The next node feature allows clients to always reach the node it is
+  -- connected to using a known IP address.
+  next_node = {
+    -- anycast IPs of all nodes
+    -- name = { 'nextnode.location.community.example.org', 'nextnode', 'nn' },
+    ip4 = '10.0.0.1',
+    ip6 = 'fd::1',
+  },
+
+  -- Options specific to routing protocols (optional)
+  -- mesh = {
+    -- Options specific to the batman-adv routing protocol (optional)
+    -- batman_adv = {
+      -- Gateway selection class (optional)
+      -- The default class 20 is based on the link quality (TQ) only,
+      -- class 1 is calculated from both the TQ and the announced bandwidth
+      -- gw_sel_class = 1,
+    -- },
+  -- },
+
+  mesh_vpn = {
+    -- enabled = true,
+    mtu = 1312,
+
+    fastd = {
+      -- Refer to https://fastd.readthedocs.io/en/latest/ to better understand
+      -- what these options do.
+
+      -- List of crypto-methods to use.
+      methods = {'salsa2012+umac'},
+      -- configurable = true,
+      -- syslog_level = 'warn',
+
+      groups = {
+        backbone = {
+          -- Limit number of connected peers to reduce bandwidth.
+          limit = 1,
+
+          -- List of peers.
+          peers = {
+          },
+
+        },
+      },
+    },
+
+    bandwidth_limit = {
+      -- The bandwidth limit can be enabled by default here.
+      enabled = false,
+
+      -- Default upload limit (kbit/s).
+      egress = 200,
+
+      -- Default download limit (kbit/s).
+      ingress = 3000,
+    },
+  },
+
+  autoupdater = {
+    -- Default branch. Don't forget to set GLUON_BRANCH when building!
+    branch = 'stable',
+
+    -- List of branches. You may define multiple branches.
+    branches = {
+      stable = {
+        name = 'stable',
+
+--        -- List of mirrors to fetch images from. IPv6 required!
+--        mirrors = {'http://1.updates.services.ffhl/stable/sysupgrade'},
+--
+--        -- Number of good signatures required.
+--        -- Have multiple maintainers sign your build and only
+--        -- accept it when a sufficient number of them have
+--        -- signed it.
+--        good_signatures = 2,
+--
+--        -- List of public keys of maintainers.
+--        pubkeys = {
+--          'xxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxx', -- Alice
+--          'xxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxx', -- Bob
+--          'xxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxx', -- Mary
+--        },
+      },
+    },
+  },
+}
diff --git a/contrib/ci/minimal-site/site.mk b/contrib/ci/minimal-site/site.mk
new file mode 100644
index 00000000..f8f84f97
--- /dev/null
+++ b/contrib/ci/minimal-site/site.mk
@@ -0,0 +1,58 @@
+##	gluon site.mk makefile example
+
+##	GLUON_FEATURES
+#		Specify Gluon features/packages to enable;
+#		Gluon will automatically enable a set of packages
+#		depending on the combination of features listed
+
+GLUON_FEATURES := \
+	autoupdater \
+	ebtables-filter-multicast \
+	ebtables-filter-ra-dhcp \
+	ebtables-limit-arp \
+	mesh-batman-adv-15 \
+	mesh-vpn-fastd \
+	radvd \
+	respondd \
+	status-page \
+	web-advanced \
+	web-wizard
+
+##	GLUON_SITE_PACKAGES
+#		Specify additional Gluon/OpenWrt packages to include here;
+#		A minus sign may be prepended to remove a packages from the
+#		selection that would be enabled by default or due to the
+#		chosen feature flags
+
+GLUON_SITE_PACKAGES := haveged iwinfo
+
+##	DEFAULT_GLUON_RELEASE
+#		version string to use for images
+#		gluon relies on
+#			opkg compare-versions "$1" '>>' "$2"
+#		to decide if a version is newer or not.
+
+DEFAULT_GLUON_RELEASE := 0.6+exp$(shell date '+%Y%m%d')
+
+# Variables set with ?= can be overwritten from the command line
+
+##	GLUON_RELEASE
+#		call make with custom GLUON_RELEASE flag, to use your own release version scheme.
+#		e.g.:
+#			$ make images GLUON_RELEASE=23.42+5
+#		would generate images named like this:
+#			gluon-ff%site_code%-23.42+5-%router_model%.bin
+
+GLUON_RELEASE ?= $(DEFAULT_GLUON_RELEASE)
+
+# Default priority for updates.
+GLUON_PRIORITY ?= 0
+
+# Region code required for some images; supported values: us eu
+GLUON_REGION ?= eu
+
+# Languages to include
+GLUON_LANGS ?= en de
+
+# Do not build images for deprecated devices
+GLUON_DEPRECATED ?= 0