ar71xx: add support for TP-Link Archer C7 v4 (#1289)
This commit is contained in:
David Bauer
Andreas Ziegler
parent
621eaf3c91
commit
9273e56c63
@ -37,7 +37,8 @@ elseif platform.match('ar71xx', 'generic', {'unifi-outdoor-plus', 'carambola2',
|
|||||||
'om2p-hs', 'om2p-hsv2', 'om2p-hsv3',
|
'om2p-hs', 'om2p-hsv2', 'om2p-hsv3',
|
||||||
'om2p-lc',
|
'om2p-lc',
|
||||||
'om5p', 'om5p-an',
|
'om5p', 'om5p-an',
|
||||||
'om5p-ac', 'om5p-acv2'}) then
|
'om5p-ac', 'om5p-acv2',
|
||||||
|
'archer-c7-v4'}) then
|
||||||
table.insert(try_files, 1, '/sys/class/net/eth0/address')
|
table.insert(try_files, 1, '/sys/class/net/eth0/address')
|
||||||
elseif platform.match('ar71xx', 'generic', {'archer-c5', 'archer-c7'}) then
|
elseif platform.match('ar71xx', 'generic', {'archer-c5', 'archer-c7'}) then
|
||||||
table.insert(try_files, 1, '/sys/class/net/eth1/address')
|
table.insert(try_files, 1, '/sys/class/net/eth1/address')
|
||||||
|
|||||||
@ -0,0 +1,533 @@
|
|||||||
|
From: Felix Fietkau <nbd@nbd.name>
|
||||||
|
Date: Tue, 25 Jul 2017 13:32:47 +0200
|
||||||
|
Subject: ar71xx: add support for TP-LINK Archer C7 v4
|
||||||
|
|
||||||
|
TP-Link Archer C7 v4 is a dual-band AC1750 router, based on Qualcomm/Atheros
|
||||||
|
QCA9561+QCA9888.
|
||||||
|
|
||||||
|
Specification:
|
||||||
|
|
||||||
|
- 775/650/258 MHz (CPU/DDR/AHB)
|
||||||
|
- 128 MB of RAM (DDR2)
|
||||||
|
- 16 MB of FLASH (SPI NOR)
|
||||||
|
- 3T3R 2.4 GHz
|
||||||
|
- 3T3R 5 GHz
|
||||||
|
- 5x 10/100/1000 Mbps Ethernet
|
||||||
|
- 7x LED, 2x button
|
||||||
|
- UART header on PCB
|
||||||
|
|
||||||
|
Flash instruction:
|
||||||
|
1. Upload lede-ar71xx-generic-archer-c7-v4-squashfs-factory.bin via Web interface
|
||||||
|
|
||||||
|
Flash instruction using TFTP recovery:
|
||||||
|
1. Set PC to fixed ip address 192.168.0.66
|
||||||
|
2. Download lede-ar71xx-generic-archer-c7-v4-squashfs-factory.bin
|
||||||
|
and rename it to ArcherC7v4_tp_recovery.bin
|
||||||
|
3. Start a tftp server with the file tp_recovery.bin in its root directory
|
||||||
|
4. Turn off the router
|
||||||
|
5. Press and hold Reset button
|
||||||
|
6. Turn on router with the reset button pressed and wait ~15 seconds
|
||||||
|
7. Release the reset button and after a short time
|
||||||
|
the firmware should be transferred from the tftp server
|
||||||
|
8. Wait ~30 second to complete recovery.
|
||||||
|
|
||||||
|
Flash instruction under U-Boot, using UART:
|
||||||
|
|
||||||
|
1. tftp 0x81000000 lede-ar71xx-...-sysupgrade.bin
|
||||||
|
2. erase 0x9f040000 +$filesize
|
||||||
|
3. cp.b $fileaddr 0x9f040000 $filesize
|
||||||
|
4. reset
|
||||||
|
|
||||||
|
Signed-off-by: Felix Fietkau <nbd@nbd.name>
|
||||||
|
|
||||||
|
diff --git a/target/linux/ar71xx/base-files/etc/board.d/01_leds b/target/linux/ar71xx/base-files/etc/board.d/01_leds
|
||||||
|
index e67b5e38561e841b88e486341950c52e1d454322..44b1c2837e8392596eed14b4bc0d761042109715 100755
|
||||||
|
--- a/target/linux/ar71xx/base-files/etc/board.d/01_leds
|
||||||
|
+++ b/target/linux/ar71xx/base-files/etc/board.d/01_leds
|
||||||
|
@@ -53,7 +53,8 @@ ap121f)
|
||||||
|
ucidef_set_led_netdev "lan" "LAN" "$board:green:lan" "eth0"
|
||||||
|
ucidef_set_led_wlan "wlan" "WLAN" "$board:green:wlan" "phy0tpt"
|
||||||
|
;;
|
||||||
|
-archer-c25-v1)
|
||||||
|
+archer-c25-v1|\
|
||||||
|
+archer-c7-v4)
|
||||||
|
ucidef_set_led_netdev "wan" "WAN" "$board:green:wan" "eth0"
|
||||||
|
ucidef_set_led_wlan "wlan" "WLAN" "$board:green:wlan2g" "phy1tpt"
|
||||||
|
ucidef_set_led_wlan "wlan5g" "WLAN5G" "$board:green:wlan5g" "phy0tpt"
|
||||||
|
@@ -61,6 +62,12 @@ archer-c25-v1)
|
||||||
|
ucidef_set_led_switch "lan2" "LAN2" "$board:green:lan2" "switch0" "0x08"
|
||||||
|
ucidef_set_led_switch "lan3" "LAN3" "$board:green:lan3" "switch0" "0x04"
|
||||||
|
ucidef_set_led_switch "lan4" "LAN4" "$board:green:lan4" "switch0" "0x02"
|
||||||
|
+ case "$board" in
|
||||||
|
+ archer-c7-v4)
|
||||||
|
+ ucidef_set_led_usbdev "usb1" "USB1" "$board:green:usb1" "1-1"
|
||||||
|
+ ucidef_set_led_usbdev "usb2" "USB2" "$board:green:usb2" "2-1"
|
||||||
|
+ ;;
|
||||||
|
+ esac
|
||||||
|
;;
|
||||||
|
arduino-yun)
|
||||||
|
ucidef_set_led_wlan "wlan" "WLAN" "arduino:blue:wlan" "phy0tpt"
|
||||||
|
diff --git a/target/linux/ar71xx/base-files/etc/board.d/02_network b/target/linux/ar71xx/base-files/etc/board.d/02_network
|
||||||
|
index 27a0266923743d4856919b9c8772a40e59febe83..b8452d79cb7f0f856f60ad3050cc9627d2536213 100755
|
||||||
|
--- a/target/linux/ar71xx/base-files/etc/board.d/02_network
|
||||||
|
+++ b/target/linux/ar71xx/base-files/etc/board.d/02_network
|
||||||
|
@@ -380,6 +380,7 @@ ar71xx_setup_interfaces()
|
||||||
|
ucidef_set_interface_wan "eth0"
|
||||||
|
ucidef_set_interface_raw "wlan" "wlan0" "dhcp"
|
||||||
|
;;
|
||||||
|
+ archer-c7-v4|\
|
||||||
|
tl-wdr4300|\
|
||||||
|
tl-wr1041n-v2)
|
||||||
|
ucidef_add_switch "switch0" \
|
||||||
|
diff --git a/target/linux/ar71xx/base-files/etc/diag.sh b/target/linux/ar71xx/base-files/etc/diag.sh
|
||||||
|
index 61db387c9ecefd7090c25a5f5d75fdbf65a44d65..97372bed0ea2fadfab10f22916a1e0d6a9c65725 100644
|
||||||
|
--- a/target/linux/ar71xx/base-files/etc/diag.sh
|
||||||
|
+++ b/target/linux/ar71xx/base-files/etc/diag.sh
|
||||||
|
@@ -51,6 +51,7 @@ get_status_led() {
|
||||||
|
status_led="ap135:green:status"
|
||||||
|
;;
|
||||||
|
archer-c25-v1|\
|
||||||
|
+ archer-c7-v4|\
|
||||||
|
mr12|\
|
||||||
|
mr16|\
|
||||||
|
nbg6616|\
|
||||||
|
diff --git a/target/linux/ar71xx/base-files/etc/hotplug.d/firmware/11-ath10k-caldata b/target/linux/ar71xx/base-files/etc/hotplug.d/firmware/11-ath10k-caldata
|
||||||
|
index 68f90de802ddd18e09a1da39c0d56292eea9489c..96b8f6b9a4bdd6a1609a819e72ade315bccfb3c0 100644
|
||||||
|
--- a/target/linux/ar71xx/base-files/etc/hotplug.d/firmware/11-ath10k-caldata
|
||||||
|
+++ b/target/linux/ar71xx/base-files/etc/hotplug.d/firmware/11-ath10k-caldata
|
||||||
|
@@ -92,6 +92,7 @@ case "$FIRMWARE" in
|
||||||
|
ath10kcal_extract "art" 20480 2116
|
||||||
|
ath10kcal_patch_mac $(macaddr_add $(cat /sys/class/net/eth0/address) -2)
|
||||||
|
;;
|
||||||
|
+ archer-c7-v4|\
|
||||||
|
archer-c25-v1|\
|
||||||
|
tl-wdr6500-v2)
|
||||||
|
ath10kcal_extract "art" 20480 2116
|
||||||
|
diff --git a/target/linux/ar71xx/base-files/lib/ar71xx.sh b/target/linux/ar71xx/base-files/lib/ar71xx.sh
|
||||||
|
index de6042b202bbd07e64833743933be1cbaf1ed495..ddb8f0db80ed6eab39c832bfd893182d9f591ad4 100755
|
||||||
|
--- a/target/linux/ar71xx/base-files/lib/ar71xx.sh
|
||||||
|
+++ b/target/linux/ar71xx/base-files/lib/ar71xx.sh
|
||||||
|
@@ -466,6 +466,9 @@ ar71xx_board_detect() {
|
||||||
|
*"Archer C5")
|
||||||
|
name="archer-c5"
|
||||||
|
;;
|
||||||
|
+ *"Archer C7 v4")
|
||||||
|
+ name="archer-c7-v4"
|
||||||
|
+ ;;
|
||||||
|
*"Archer C7")
|
||||||
|
name="archer-c7"
|
||||||
|
;;
|
||||||
|
diff --git a/target/linux/ar71xx/base-files/lib/upgrade/platform.sh b/target/linux/ar71xx/base-files/lib/upgrade/platform.sh
|
||||||
|
index e748a2559cdb3a0ca6618429b0f613a656e39388..d414af969912894574e73e286ed5a3998532d34e 100755
|
||||||
|
--- a/target/linux/ar71xx/base-files/lib/upgrade/platform.sh
|
||||||
|
+++ b/target/linux/ar71xx/base-files/lib/upgrade/platform.sh
|
||||||
|
@@ -207,6 +207,7 @@ platform_check_image() {
|
||||||
|
ap132|\
|
||||||
|
ap90q|\
|
||||||
|
archer-c25-v1|\
|
||||||
|
+ archer-c7-v4|\
|
||||||
|
bullet-m|\
|
||||||
|
c-55|\
|
||||||
|
carambola2|\
|
||||||
|
diff --git a/target/linux/ar71xx/files/arch/mips/ath79/Kconfig.openwrt b/target/linux/ar71xx/files/arch/mips/ath79/Kconfig.openwrt
|
||||||
|
index 7ad5419f51ec9909d8b59f33178221a7d81ec184..0a25294c40b5e2d3be825554ec7246a50b9c029b 100644
|
||||||
|
--- a/target/linux/ar71xx/files/arch/mips/ath79/Kconfig.openwrt
|
||||||
|
+++ b/target/linux/ar71xx/files/arch/mips/ath79/Kconfig.openwrt
|
||||||
|
@@ -1247,6 +1247,7 @@ config ATH79_MACH_ARCHER_C25_V1
|
||||||
|
config ATH79_MACH_ARCHER_C7
|
||||||
|
bool "TP-LINK Archer C5/C7/TL-WDR4900 v2 board support"
|
||||||
|
select SOC_QCA955X
|
||||||
|
+ select SOC_QCA956X
|
||||||
|
select ATH79_DEV_AP9X_PCI if PCI
|
||||||
|
select ATH79_DEV_ETH
|
||||||
|
select ATH79_DEV_GPIO_BUTTONS
|
||||||
|
diff --git a/target/linux/ar71xx/files/arch/mips/ath79/Makefile b/target/linux/ar71xx/files/arch/mips/ath79/Makefile
|
||||||
|
index 3365a43ce16fc77b3212b39b92081efe678e8803..a0c73550eb0d5bf07ee731171be9e5ef9ff073e7 100644
|
||||||
|
--- a/target/linux/ar71xx/files/arch/mips/ath79/Makefile
|
||||||
|
+++ b/target/linux/ar71xx/files/arch/mips/ath79/Makefile
|
||||||
|
@@ -58,6 +58,7 @@ obj-$(CONFIG_ATH79_MACH_AP90Q) += mach-ap90q.o
|
||||||
|
obj-$(CONFIG_ATH79_MACH_AP96) += mach-ap96.o
|
||||||
|
obj-$(CONFIG_ATH79_MACH_ARCHER_C25_V1) += mach-archer-c25-v1.o
|
||||||
|
obj-$(CONFIG_ATH79_MACH_ARCHER_C7) += mach-archer-c7.o
|
||||||
|
+obj-$(CONFIG_ATH79_MACH_ARCHER_C7) += mach-archer-c7-v4.o
|
||||||
|
obj-$(CONFIG_ATH79_MACH_ARDUINO_YUN) += mach-arduino-yun.o
|
||||||
|
obj-$(CONFIG_ATH79_MACH_AW_NR580) += mach-aw-nr580.o
|
||||||
|
obj-$(CONFIG_ATH79_MACH_BHR_4GRV2) += mach-bhr-4grv2.o
|
||||||
|
diff --git a/target/linux/ar71xx/files/arch/mips/ath79/mach-archer-c7-v4.c b/target/linux/ar71xx/files/arch/mips/ath79/mach-archer-c7-v4.c
|
||||||
|
new file mode 100644
|
||||||
|
index 0000000000000000000000000000000000000000..64955c79945c0b2c28d5a93be6e45662200e60ed
|
||||||
|
--- /dev/null
|
||||||
|
+++ b/target/linux/ar71xx/files/arch/mips/ath79/mach-archer-c7-v4.c
|
||||||
|
@@ -0,0 +1,260 @@
|
||||||
|
+
|
||||||
|
+/*
|
||||||
|
+ * Atheros ARCHER_C7 reference board support
|
||||||
|
+ *
|
||||||
|
+ * Copyright (c) 2017 Felix Fietkau <nbd@nbd.name>
|
||||||
|
+ * Copyright (c) 2014 The Linux Foundation. All rights reserved.
|
||||||
|
+ * Copyright (c) 2012 Gabor Juhos <juhosg@openwrt.org>
|
||||||
|
+ *
|
||||||
|
+ * Permission to use, copy, modify, and/or distribute this software for any
|
||||||
|
+ * purpose with or without fee is hereby granted, provided that the above
|
||||||
|
+ * copyright notice and this permission notice appear in all copies.
|
||||||
|
+ *
|
||||||
|
+ * THE SOFTWARE IS PROVIDED "AS IS" AND THE AUTHOR DISCLAIMS ALL WARRANTIES
|
||||||
|
+ * WITH REGARD TO THIS SOFTWARE INCLUDING ALL IMPLIED WARRANTIES OF
|
||||||
|
+ * MERCHANTABILITY AND FITNESS. IN NO EVENT SHALL THE AUTHOR BE LIABLE FOR
|
||||||
|
+ * ANY SPECIAL, DIRECT, INDIRECT, OR CONSEQUENTIAL DAMAGES OR ANY DAMAGES
|
||||||
|
+ * WHATSOEVER RESULTING FROM LOSS OF USE, DATA OR PROFITS, WHETHER IN AN
|
||||||
|
+ * ACTION OF CONTRACT, NEGLIGENCE OR OTHER TORTIOUS ACTION, ARISING OUT OF
|
||||||
|
+ * OR IN CONNECTION WITH THE USE OR PERFORMANCE OF THIS SOFTWARE.
|
||||||
|
+ *
|
||||||
|
+ */
|
||||||
|
+
|
||||||
|
+#include <linux/platform_device.h>
|
||||||
|
+#include <linux/ath9k_platform.h>
|
||||||
|
+#include <linux/ar8216_platform.h>
|
||||||
|
+#include <linux/proc_fs.h>
|
||||||
|
+#include <linux/gpio.h>
|
||||||
|
+#include <linux/spi/spi_gpio.h>
|
||||||
|
+#include <linux/spi/74x164.h>
|
||||||
|
+
|
||||||
|
+#include <asm/mach-ath79/ar71xx_regs.h>
|
||||||
|
+
|
||||||
|
+#include "common.h"
|
||||||
|
+#include "dev-m25p80.h"
|
||||||
|
+#include "machtypes.h"
|
||||||
|
+#include "pci.h"
|
||||||
|
+#include "dev-eth.h"
|
||||||
|
+#include "dev-gpio-buttons.h"
|
||||||
|
+#include "dev-leds-gpio.h"
|
||||||
|
+#include "dev-spi.h"
|
||||||
|
+#include "dev-usb.h"
|
||||||
|
+#include "dev-wmac.h"
|
||||||
|
+
|
||||||
|
+
|
||||||
|
+#define ARCHER_C7_GPIO_SHIFT_OE 1
|
||||||
|
+#define ARCHER_C7_GPIO_SHIFT_SER 14
|
||||||
|
+#define ARCHER_C7_GPIO_SHIFT_SRCLK 15
|
||||||
|
+#define ARCHER_C7_GPIO_SHIFT_RCLK 16
|
||||||
|
+#define ARCHER_C7_GPIO_SHIFT_SRCLR 21
|
||||||
|
+
|
||||||
|
+#define ARCHER_C7_GPIO_BTN_RESET 5
|
||||||
|
+#define ARCHER_C7_GPIO_BTN_WPS_WIFI 2
|
||||||
|
+
|
||||||
|
+#define ARCHER_C7_GPIO_LED_WLAN5 9
|
||||||
|
+#define ARCHER_C7_GPIO_LED_POWER 6
|
||||||
|
+#define ARCHER_C7_GPIO_LED_USB1 7
|
||||||
|
+#define ARCHER_C7_GPIO_LED_USB2 8
|
||||||
|
+
|
||||||
|
+#define ARCHER_C7_74HC_GPIO_BASE QCA956X_GPIO_COUNT
|
||||||
|
+#define ARCHER_C7_GPIO_LED_WPS (ARCHER_C7_74HC_GPIO_BASE + 0)
|
||||||
|
+#define ARCHER_C7_GPIO_LED_LAN1 (ARCHER_C7_74HC_GPIO_BASE + 1)
|
||||||
|
+#define ARCHER_C7_GPIO_LED_LAN2 (ARCHER_C7_74HC_GPIO_BASE + 2)
|
||||||
|
+#define ARCHER_C7_GPIO_LED_LAN3 (ARCHER_C7_74HC_GPIO_BASE + 3)
|
||||||
|
+#define ARCHER_C7_GPIO_LED_LAN4 (ARCHER_C7_74HC_GPIO_BASE + 4)
|
||||||
|
+#define ARCHER_C7_GPIO_LED_WAN_GREEN (ARCHER_C7_74HC_GPIO_BASE + 5)
|
||||||
|
+#define ARCHER_C7_GPIO_LED_WAN_AMBER (ARCHER_C7_74HC_GPIO_BASE + 6)
|
||||||
|
+#define ARCHER_C7_GPIO_LED_WLAN2 (ARCHER_C7_74HC_GPIO_BASE + 7)
|
||||||
|
+
|
||||||
|
+#define ARCHER_C7_KEYS_POLL_INTERVAL 20 /* msecs */
|
||||||
|
+#define ARCHER_C7_KEYS_DEBOUNCE_INTERVAL (3 * ARCHER_C7_KEYS_POLL_INTERVAL)
|
||||||
|
+
|
||||||
|
+#define ARCHER_C7_MAC0_OFFSET 0
|
||||||
|
+#define ARCHER_C7_MAC1_OFFSET 6
|
||||||
|
+#define ARCHER_C7_WMAC_CALDATA_OFFSET 0x1000
|
||||||
|
+
|
||||||
|
+#define ARCHER_C7_GPIO_MDC 3
|
||||||
|
+#define ARCHER_C7_GPIO_MDIO 4
|
||||||
|
+
|
||||||
|
+static struct spi_gpio_platform_data archer_c7_v4_spi_data = {
|
||||||
|
+ .sck = ARCHER_C7_GPIO_SHIFT_SRCLK,
|
||||||
|
+ .miso = SPI_GPIO_NO_MISO,
|
||||||
|
+ .mosi = ARCHER_C7_GPIO_SHIFT_SER,
|
||||||
|
+ .num_chipselect = 1,
|
||||||
|
+};
|
||||||
|
+
|
||||||
|
+static u8 archer_c7_v4_ssr_initdata __initdata = 0xff;
|
||||||
|
+
|
||||||
|
+static struct gen_74x164_chip_platform_data archer_c7_v4_ssr_data = {
|
||||||
|
+ .base = ARCHER_C7_74HC_GPIO_BASE,
|
||||||
|
+ .num_registers = 1,
|
||||||
|
+ .init_data = &archer_c7_v4_ssr_initdata,
|
||||||
|
+};
|
||||||
|
+
|
||||||
|
+static struct platform_device archer_c7_v4_spi_device = {
|
||||||
|
+ .name = "spi_gpio",
|
||||||
|
+ .id = 1,
|
||||||
|
+ .dev = {
|
||||||
|
+ .platform_data = &archer_c7_v4_spi_data,
|
||||||
|
+ },
|
||||||
|
+};
|
||||||
|
+
|
||||||
|
+static struct spi_board_info archer_c7_v4_spi_info[] = {
|
||||||
|
+ {
|
||||||
|
+ .bus_num = 1,
|
||||||
|
+ .chip_select = 0,
|
||||||
|
+ .max_speed_hz = 10000000,
|
||||||
|
+ .modalias = "74x164",
|
||||||
|
+ .platform_data = &archer_c7_v4_ssr_data,
|
||||||
|
+ .controller_data = (void *) ARCHER_C7_GPIO_SHIFT_RCLK,
|
||||||
|
+ },
|
||||||
|
+};
|
||||||
|
+
|
||||||
|
+static struct gpio_led archer_c7_v4_leds_gpio[] __initdata = {
|
||||||
|
+ {
|
||||||
|
+ .name = "archer-c7-v4:green:power",
|
||||||
|
+ .gpio = ARCHER_C7_GPIO_LED_POWER,
|
||||||
|
+ .active_low = 1,
|
||||||
|
+ }, {
|
||||||
|
+ .name = "archer-c7-v4:green:wps",
|
||||||
|
+ .gpio = ARCHER_C7_GPIO_LED_WPS,
|
||||||
|
+ .active_low = 1,
|
||||||
|
+ }, {
|
||||||
|
+ .name = "archer-c7-v4:green:wlan2g",
|
||||||
|
+ .gpio = ARCHER_C7_GPIO_LED_WLAN2,
|
||||||
|
+ .active_low = 1,
|
||||||
|
+ }, {
|
||||||
|
+ .name = "archer-c7-v4:green:wlan5g",
|
||||||
|
+ .gpio = ARCHER_C7_GPIO_LED_WLAN5,
|
||||||
|
+ .active_low = 1,
|
||||||
|
+ }, {
|
||||||
|
+ .name = "archer-c7-v4:green:lan1",
|
||||||
|
+ .gpio = ARCHER_C7_GPIO_LED_LAN1,
|
||||||
|
+ .active_low = 1,
|
||||||
|
+ }, {
|
||||||
|
+ .name = "archer-c7-v4:green:lan2",
|
||||||
|
+ .gpio = ARCHER_C7_GPIO_LED_LAN2,
|
||||||
|
+ .active_low = 1,
|
||||||
|
+ }, {
|
||||||
|
+ .name = "archer-c7-v4:green:lan3",
|
||||||
|
+ .gpio = ARCHER_C7_GPIO_LED_LAN3,
|
||||||
|
+ .active_low = 1,
|
||||||
|
+ }, {
|
||||||
|
+ .name = "archer-c7-v4:green:lan4",
|
||||||
|
+ .gpio = ARCHER_C7_GPIO_LED_LAN4,
|
||||||
|
+ .active_low = 1,
|
||||||
|
+ }, {
|
||||||
|
+ .name = "archer-c7-v4:green:wan",
|
||||||
|
+ .gpio = ARCHER_C7_GPIO_LED_WAN_GREEN,
|
||||||
|
+ .active_low = 1,
|
||||||
|
+ }, {
|
||||||
|
+ .name = "archer-c7-v4:amber:wan",
|
||||||
|
+ .gpio = ARCHER_C7_GPIO_LED_WAN_AMBER,
|
||||||
|
+ .active_low = 1,
|
||||||
|
+ }, {
|
||||||
|
+ .name = "archer-c7-v4:green:usb1",
|
||||||
|
+ .gpio = ARCHER_C7_GPIO_LED_USB1,
|
||||||
|
+ .active_low = 1,
|
||||||
|
+ }, {
|
||||||
|
+ .name = "archer-c7-v4:green:usb2",
|
||||||
|
+ .gpio = ARCHER_C7_GPIO_LED_USB2,
|
||||||
|
+ .active_low = 1,
|
||||||
|
+ },
|
||||||
|
+};
|
||||||
|
+
|
||||||
|
+static struct gpio_keys_button archer_c7_v4_gpio_keys[] __initdata = {
|
||||||
|
+ {
|
||||||
|
+ .desc = "WPS and WIFI button",
|
||||||
|
+ .type = EV_KEY,
|
||||||
|
+ .code = KEY_WPS_BUTTON,
|
||||||
|
+ .debounce_interval = ARCHER_C7_KEYS_DEBOUNCE_INTERVAL,
|
||||||
|
+ .gpio = ARCHER_C7_GPIO_BTN_WPS_WIFI,
|
||||||
|
+ .active_low = 1,
|
||||||
|
+ },
|
||||||
|
+ {
|
||||||
|
+ .desc = "Reset button",
|
||||||
|
+ .type = EV_KEY,
|
||||||
|
+ .code = KEY_RESTART,
|
||||||
|
+ .debounce_interval = ARCHER_C7_KEYS_DEBOUNCE_INTERVAL,
|
||||||
|
+ .gpio = ARCHER_C7_GPIO_BTN_RESET,
|
||||||
|
+ .active_low = 1,
|
||||||
|
+ },
|
||||||
|
+};
|
||||||
|
+
|
||||||
|
+static struct ar8327_pad_cfg archer_c7_v4_ar8337_pad0_cfg = {
|
||||||
|
+ .mode = AR8327_PAD_MAC_SGMII,
|
||||||
|
+ .sgmii_delay_en = true,
|
||||||
|
+};
|
||||||
|
+
|
||||||
|
+static struct ar8327_platform_data archer_c7_v4_ar8337_data = {
|
||||||
|
+ .pad0_cfg = &archer_c7_v4_ar8337_pad0_cfg,
|
||||||
|
+ .port0_cfg = {
|
||||||
|
+ .force_link = 1,
|
||||||
|
+ .speed = AR8327_PORT_SPEED_1000,
|
||||||
|
+ .duplex = 1,
|
||||||
|
+ .txpause = 1,
|
||||||
|
+ .rxpause = 1,
|
||||||
|
+ },
|
||||||
|
+};
|
||||||
|
+
|
||||||
|
+static struct mdio_board_info archer_c7_v4_mdio0_info[] = {
|
||||||
|
+ {
|
||||||
|
+ .bus_id = "ag71xx-mdio.0",
|
||||||
|
+ .phy_addr = 0,
|
||||||
|
+ .platform_data = &archer_c7_v4_ar8337_data,
|
||||||
|
+ },
|
||||||
|
+};
|
||||||
|
+
|
||||||
|
+
|
||||||
|
+static void __init archer_c7_v4_setup(void)
|
||||||
|
+{
|
||||||
|
+ u8 *art = (u8 *) KSEG1ADDR(0x1fff0000);
|
||||||
|
+ u8 *mac = (u8 *) KSEG1ADDR(0x1ff00008);
|
||||||
|
+
|
||||||
|
+ ath79_register_m25p80(NULL);
|
||||||
|
+
|
||||||
|
+ spi_register_board_info(archer_c7_v4_spi_info,
|
||||||
|
+ ARRAY_SIZE(archer_c7_v4_spi_info));
|
||||||
|
+
|
||||||
|
+ platform_device_register(&archer_c7_v4_spi_device);
|
||||||
|
+
|
||||||
|
+ gpio_request_one(ARCHER_C7_GPIO_SHIFT_OE,
|
||||||
|
+ GPIOF_OUT_INIT_LOW | GPIOF_EXPORT_DIR_FIXED,
|
||||||
|
+ "LED control");
|
||||||
|
+
|
||||||
|
+ gpio_request_one(ARCHER_C7_GPIO_SHIFT_SRCLR,
|
||||||
|
+ GPIOF_OUT_INIT_HIGH | GPIOF_EXPORT_DIR_FIXED,
|
||||||
|
+ "LED reset");
|
||||||
|
+
|
||||||
|
+ ath79_register_leds_gpio(-1, ARRAY_SIZE(archer_c7_v4_leds_gpio),
|
||||||
|
+ archer_c7_v4_leds_gpio);
|
||||||
|
+
|
||||||
|
+ ath79_register_gpio_keys_polled(-1, ARCHER_C7_KEYS_POLL_INTERVAL,
|
||||||
|
+ ARRAY_SIZE(archer_c7_v4_gpio_keys),
|
||||||
|
+ archer_c7_v4_gpio_keys);
|
||||||
|
+
|
||||||
|
+ ath79_register_usb();
|
||||||
|
+
|
||||||
|
+ ath79_gpio_output_select(ARCHER_C7_GPIO_MDC, QCA956X_GPIO_OUT_MUX_GE0_MDC);
|
||||||
|
+ ath79_gpio_output_select(ARCHER_C7_GPIO_MDIO, QCA956X_GPIO_OUT_MUX_GE0_MDO);
|
||||||
|
+
|
||||||
|
+ ath79_register_mdio(0, 0x0);
|
||||||
|
+
|
||||||
|
+ mdiobus_register_board_info(archer_c7_v4_mdio0_info,
|
||||||
|
+ ARRAY_SIZE(archer_c7_v4_mdio0_info));
|
||||||
|
+
|
||||||
|
+ ath79_register_wmac(art + ARCHER_C7_WMAC_CALDATA_OFFSET, mac);
|
||||||
|
+ ath79_register_pci();
|
||||||
|
+
|
||||||
|
+ /* GMAC0 is connected to an AR8337 switch */
|
||||||
|
+ ath79_init_mac(ath79_eth0_data.mac_addr, mac, 0);
|
||||||
|
+ ath79_eth0_data.phy_if_mode = PHY_INTERFACE_MODE_SGMII;
|
||||||
|
+ ath79_eth0_data.speed = SPEED_1000;
|
||||||
|
+ ath79_eth0_data.duplex = DUPLEX_FULL;
|
||||||
|
+ ath79_eth0_data.phy_mask = BIT(0);
|
||||||
|
+ ath79_eth0_data.mii_bus_dev = &ath79_mdio0_device.dev;
|
||||||
|
+ ath79_register_eth(0);
|
||||||
|
+}
|
||||||
|
+
|
||||||
|
+MIPS_MACHINE(ATH79_MACH_ARCHER_C7_V4, "ARCHER-C7-V4", "TP-LINK Archer C7 v4",
|
||||||
|
+ archer_c7_v4_setup);
|
||||||
|
diff --git a/target/linux/ar71xx/files/arch/mips/ath79/machtypes.h b/target/linux/ar71xx/files/arch/mips/ath79/machtypes.h
|
||||||
|
index 9cb4a7f2e1df641232289721b676a9b0149c76e5..e4623fd08836d59ad4e79e96f02e75e502a55ca6 100644
|
||||||
|
--- a/target/linux/ar71xx/files/arch/mips/ath79/machtypes.h
|
||||||
|
+++ b/target/linux/ar71xx/files/arch/mips/ath79/machtypes.h
|
||||||
|
@@ -44,6 +44,7 @@ enum ath79_mach_type {
|
||||||
|
ATH79_MACH_ARCHER_C5, /* TP-LINK Archer C5 board */
|
||||||
|
ATH79_MACH_ARCHER_C7, /* TP-LINK Archer C7 board */
|
||||||
|
ATH79_MACH_ARCHER_C7_V2, /* TP-LINK Archer C7 V2 board */
|
||||||
|
+ ATH79_MACH_ARCHER_C7_V4, /* TP-LINK Archer C7 V4 board */
|
||||||
|
ATH79_MACH_ARDUINO_YUN, /* Yun */
|
||||||
|
ATH79_MACH_AW_NR580, /* AzureWave AW-NR580 */
|
||||||
|
ATH79_MACH_BHR_4GRV2, /* Buffalo BHR-4GRV2 */
|
||||||
|
diff --git a/target/linux/ar71xx/image/tp-link.mk b/target/linux/ar71xx/image/tp-link.mk
|
||||||
|
index 5be7cbfbd4ab7d73d679d52d2581459250e04302..27d6c73454aef96e5da47033ec664d2caffca1d5 100644
|
||||||
|
--- a/target/linux/ar71xx/image/tp-link.mk
|
||||||
|
+++ b/target/linux/ar71xx/image/tp-link.mk
|
||||||
|
@@ -298,6 +298,22 @@ define Device/archer-c7-v2
|
||||||
|
IMAGE/factory-eu.bin := append-rootfs | mktplinkfw factory -C EU
|
||||||
|
endef
|
||||||
|
|
||||||
|
+define Device/archer-c7-v4
|
||||||
|
+ DEVICE_TITLE := TP-LINK Archer C7 v4
|
||||||
|
+ DEVICE_PACKAGES := kmod-ath10k ath10k-firmware-qca988x
|
||||||
|
+ BOARDNAME := ARCHER-C7-V4
|
||||||
|
+ TPLINK_BOARD_NAME := ARCHER-C7-V4
|
||||||
|
+ IMAGE_SIZE := 15104k
|
||||||
|
+ LOADER_TYPE := elf
|
||||||
|
+ KERNEL := kernel-bin | patch-cmdline | lzma | uImageArcher lzma
|
||||||
|
+ IMAGES := sysupgrade.bin factory.bin
|
||||||
|
+ IMAGE/sysupgrade.bin := append-rootfs | tplink-safeloader sysupgrade | \
|
||||||
|
+ append-metadata | check-size $$$$(IMAGE_SIZE)
|
||||||
|
+ IMAGE/factory.bin := append-rootfs | tplink-safeloader factory
|
||||||
|
+ MTDPARTS := spi0.0:128k(factory-uboot)ro,128k(u-boot)ro,1536k(kernel),13568k(rootfs),960k(config)ro,64k(art)ro,15104k@0x40000(firmware)
|
||||||
|
+ SUPPORTED_DEVICES := archer-c7-v4
|
||||||
|
+endef
|
||||||
|
+
|
||||||
|
define Device/archer-c7-v2-il
|
||||||
|
$(Device/tplink-16mlzma)
|
||||||
|
DEVICE_TITLE := TP-LINK Archer C7 v2 IL
|
||||||
|
@@ -316,7 +332,7 @@ define Device/tl-wdr7500-v3
|
||||||
|
DEVICE_PROFILE := ARCHERC7
|
||||||
|
TPLINK_HWID := 0x75000003
|
||||||
|
endef
|
||||||
|
-TARGET_DEVICES += archer-c5-v1 archer-c7-v1 archer-c7-v2 archer-c7-v2-il tl-wdr7500-v3
|
||||||
|
+TARGET_DEVICES += archer-c5-v1 archer-c7-v1 archer-c7-v2 archer-c7-v2-il archer-c7-v4 tl-wdr7500-v3
|
||||||
|
|
||||||
|
define Device/tl-mr10u-v1
|
||||||
|
$(Device/tplink-4mlzma)
|
||||||
|
diff --git a/tools/firmware-utils/src/tplink-safeloader.c b/tools/firmware-utils/src/tplink-safeloader.c
|
||||||
|
index 478d5d8e9b43bbe37694732c138048c8fe8d807c..fec830c23ce6707755ddefc849f195872be1e877 100644
|
||||||
|
--- a/tools/firmware-utils/src/tplink-safeloader.c
|
||||||
|
+++ b/tools/firmware-utils/src/tplink-safeloader.c
|
||||||
|
@@ -376,6 +376,49 @@ static struct device_info boards[] = {
|
||||||
|
.last_sysupgrade_partition = "file-system"
|
||||||
|
},
|
||||||
|
|
||||||
|
+ /** Firmware layout for the C7 */
|
||||||
|
+ {
|
||||||
|
+ .id = "ARCHER-C7-V4",
|
||||||
|
+ .support_list =
|
||||||
|
+ "SupportList:\n"
|
||||||
|
+ "{product_name:Archer C7,product_ver:4.0.0,special_id:45550000}\n"
|
||||||
|
+ "{product_name:Archer C7,product_ver:4.0.0,special_id:55530000}\n"
|
||||||
|
+ "{product_name:Archer C7,product_ver:4.0.0,special_id:43410000}\n",
|
||||||
|
+ .support_trail = '\x00',
|
||||||
|
+ .soft_ver = "soft_ver:1.0.0\n",
|
||||||
|
+
|
||||||
|
+ /**
|
||||||
|
+ We use a bigger os-image partition than the stock images (and thus
|
||||||
|
+ smaller file-system), as our kernel doesn't fit in the stock firmware's
|
||||||
|
+ 1MB os-image.
|
||||||
|
+ */
|
||||||
|
+ .partitions = {
|
||||||
|
+ {"factory-boot", 0x00000, 0x20000},
|
||||||
|
+ {"fs-uboot", 0x20000, 0x20000},
|
||||||
|
+ {"os-image", 0x40000, 0x180000}, /* Stock: base 0x40000 size 0x120000 */
|
||||||
|
+ {"file-system", 0x1c0000, 0xd40000}, /* Stock: base 0x160000 size 0xda0000 */
|
||||||
|
+ {"default-mac", 0xf00000, 0x00200},
|
||||||
|
+ {"pin", 0xf00200, 0x00200},
|
||||||
|
+ {"device-id", 0xf00400, 0x00100},
|
||||||
|
+ {"product-info", 0xf00500, 0x0fb00},
|
||||||
|
+ {"soft-version", 0xf10000, 0x00100},
|
||||||
|
+ {"extra-para", 0xf11000, 0x01000},
|
||||||
|
+ {"support-list", 0xf12000, 0x0a000},
|
||||||
|
+ {"profile", 0xf1c000, 0x04000},
|
||||||
|
+ {"default-config", 0xf20000, 0x10000},
|
||||||
|
+ {"user-config", 0xf30000, 0x40000},
|
||||||
|
+ {"qos-db", 0xf70000, 0x40000},
|
||||||
|
+ {"certificate", 0xfb0000, 0x10000},
|
||||||
|
+ {"partition-table", 0xfc0000, 0x10000},
|
||||||
|
+ {"log", 0xfd0000, 0x20000},
|
||||||
|
+ {"radio", 0xff0000, 0x10000},
|
||||||
|
+ {NULL, 0, 0}
|
||||||
|
+ },
|
||||||
|
+
|
||||||
|
+ .first_sysupgrade_partition = "os-image",
|
||||||
|
+ .last_sysupgrade_partition = "file-system",
|
||||||
|
+ },
|
||||||
|
+
|
||||||
|
/** Firmware layout for the C9 */
|
||||||
|
{
|
||||||
|
.id = "ARCHERC9",
|
||||||
|
@@ -929,6 +972,9 @@ static void build_image(const char *output,
|
||||||
|
strcasecmp(info->id, "TLWR1043NV5") == 0) {
|
||||||
|
const char mdat[11] = {0x00, 0x00, 0x00, 0x02, 0x00, 0x00, 0x00, 0x00, 0x01, 0x00, 0x00};
|
||||||
|
parts[5] = put_data("extra-para", mdat, 11);
|
||||||
|
+ } else if (strcasecmp(info->id, "ARCHER-C7-V4") == 0) {
|
||||||
|
+ const char mdat[11] = {0x01, 0x00, 0x00, 0x02, 0x00, 0x00, 0xca, 0x00, 0x01, 0x00, 0x00};
|
||||||
|
+ parts[5] = put_data("extra-para", mdat, 11);
|
||||||
|
}
|
||||||
|
|
||||||
|
size_t len;
|
||||||
@ -0,0 +1,72 @@
|
|||||||
|
From: David Bauer <mail@david-bauer.net>
|
||||||
|
Date: Sat, 16 Dec 2017 15:43:02 +0100
|
||||||
|
Subject: ar71xx: fix TP-Link Archer C7 v4 switch LEDs
|
||||||
|
|
||||||
|
This fixes wrong switch LEDs on TP-Link Archer C7 v4.
|
||||||
|
|
||||||
|
Signed-off-by: David Bauer <mail@david-bauer.net>
|
||||||
|
|
||||||
|
diff --git a/target/linux/ar71xx/base-files/etc/board.d/01_leds b/target/linux/ar71xx/base-files/etc/board.d/01_leds
|
||||||
|
index 44b1c2837e8392596eed14b4bc0d761042109715..47b90d9cb2f81936aed22cdf7d1f6d870d23c16e 100755
|
||||||
|
--- a/target/linux/ar71xx/base-files/etc/board.d/01_leds
|
||||||
|
+++ b/target/linux/ar71xx/base-files/etc/board.d/01_leds
|
||||||
|
@@ -53,8 +53,7 @@ ap121f)
|
||||||
|
ucidef_set_led_netdev "lan" "LAN" "$board:green:lan" "eth0"
|
||||||
|
ucidef_set_led_wlan "wlan" "WLAN" "$board:green:wlan" "phy0tpt"
|
||||||
|
;;
|
||||||
|
-archer-c25-v1|\
|
||||||
|
-archer-c7-v4)
|
||||||
|
+archer-c25-v1)
|
||||||
|
ucidef_set_led_netdev "wan" "WAN" "$board:green:wan" "eth0"
|
||||||
|
ucidef_set_led_wlan "wlan" "WLAN" "$board:green:wlan2g" "phy1tpt"
|
||||||
|
ucidef_set_led_wlan "wlan5g" "WLAN5G" "$board:green:wlan5g" "phy0tpt"
|
||||||
|
@@ -62,12 +61,6 @@ archer-c7-v4)
|
||||||
|
ucidef_set_led_switch "lan2" "LAN2" "$board:green:lan2" "switch0" "0x08"
|
||||||
|
ucidef_set_led_switch "lan3" "LAN3" "$board:green:lan3" "switch0" "0x04"
|
||||||
|
ucidef_set_led_switch "lan4" "LAN4" "$board:green:lan4" "switch0" "0x02"
|
||||||
|
- case "$board" in
|
||||||
|
- archer-c7-v4)
|
||||||
|
- ucidef_set_led_usbdev "usb1" "USB1" "$board:green:usb1" "1-1"
|
||||||
|
- ucidef_set_led_usbdev "usb2" "USB2" "$board:green:usb2" "2-1"
|
||||||
|
- ;;
|
||||||
|
- esac
|
||||||
|
;;
|
||||||
|
arduino-yun)
|
||||||
|
ucidef_set_led_wlan "wlan" "WLAN" "arduino:blue:wlan" "phy0tpt"
|
||||||
|
@@ -635,6 +628,17 @@ archer-c7)
|
||||||
|
ucidef_set_led_wlan "wlan2g" "WLAN2G" "tp-link:blue:wlan2g" "phy1tpt"
|
||||||
|
ucidef_set_led_wlan "wlan5g" "WLAN5G" "tp-link:blue:wlan5g" "phy0tpt"
|
||||||
|
;;
|
||||||
|
+archer-c7-v4)
|
||||||
|
+ ucidef_set_led_wlan "wlan" "WLAN" "$board:green:wlan2g" "phy1tpt"
|
||||||
|
+ ucidef_set_led_wlan "wlan5g" "WLAN5G" "$board:green:wlan5g" "phy0tpt"
|
||||||
|
+ ucidef_set_led_switch "wan" "WAN" "$board:green:wan" "switch0" "0x02"
|
||||||
|
+ ucidef_set_led_switch "lan1" "LAN1" "$board:green:lan1" "switch0" "0x04"
|
||||||
|
+ ucidef_set_led_switch "lan2" "LAN2" "$board:green:lan2" "switch0" "0x08"
|
||||||
|
+ ucidef_set_led_switch "lan3" "LAN3" "$board:green:lan3" "switch0" "0x10"
|
||||||
|
+ ucidef_set_led_switch "lan4" "LAN4" "$board:green:lan4" "switch0" "0x20"
|
||||||
|
+ ucidef_set_led_usbdev "usb1" "USB1" "$board:green:usb1" "1-1"
|
||||||
|
+ ucidef_set_led_usbdev "usb2" "USB2" "$board:green:usb2" "2-1"
|
||||||
|
+ ;;
|
||||||
|
tl-wpa8630)
|
||||||
|
ucidef_set_led_netdev "lan" "LAN" "$board:green:lan" "eth0"
|
||||||
|
ucidef_set_led_netdev "wlan" "WLAN" "$board:green:wlan" "wlan1"
|
||||||
|
diff --git a/target/linux/ar71xx/files/arch/mips/ath79/mach-archer-c7-v4.c b/target/linux/ar71xx/files/arch/mips/ath79/mach-archer-c7-v4.c
|
||||||
|
index 64955c79945c0b2c28d5a93be6e45662200e60ed..9688b015356cb766c5966be2190e1aae29420d8d 100644
|
||||||
|
--- a/target/linux/ar71xx/files/arch/mips/ath79/mach-archer-c7-v4.c
|
||||||
|
+++ b/target/linux/ar71xx/files/arch/mips/ath79/mach-archer-c7-v4.c
|
||||||
|
@@ -58,10 +58,10 @@
|
||||||
|
|
||||||
|
#define ARCHER_C7_74HC_GPIO_BASE QCA956X_GPIO_COUNT
|
||||||
|
#define ARCHER_C7_GPIO_LED_WPS (ARCHER_C7_74HC_GPIO_BASE + 0)
|
||||||
|
-#define ARCHER_C7_GPIO_LED_LAN1 (ARCHER_C7_74HC_GPIO_BASE + 1)
|
||||||
|
-#define ARCHER_C7_GPIO_LED_LAN2 (ARCHER_C7_74HC_GPIO_BASE + 2)
|
||||||
|
-#define ARCHER_C7_GPIO_LED_LAN3 (ARCHER_C7_74HC_GPIO_BASE + 3)
|
||||||
|
-#define ARCHER_C7_GPIO_LED_LAN4 (ARCHER_C7_74HC_GPIO_BASE + 4)
|
||||||
|
+#define ARCHER_C7_GPIO_LED_LAN4 (ARCHER_C7_74HC_GPIO_BASE + 1)
|
||||||
|
+#define ARCHER_C7_GPIO_LED_LAN3 (ARCHER_C7_74HC_GPIO_BASE + 2)
|
||||||
|
+#define ARCHER_C7_GPIO_LED_LAN2 (ARCHER_C7_74HC_GPIO_BASE + 3)
|
||||||
|
+#define ARCHER_C7_GPIO_LED_LAN1 (ARCHER_C7_74HC_GPIO_BASE + 4)
|
||||||
|
#define ARCHER_C7_GPIO_LED_WAN_GREEN (ARCHER_C7_74HC_GPIO_BASE + 5)
|
||||||
|
#define ARCHER_C7_GPIO_LED_WAN_AMBER (ARCHER_C7_74HC_GPIO_BASE + 6)
|
||||||
|
#define ARCHER_C7_GPIO_LED_WLAN2 (ARCHER_C7_74HC_GPIO_BASE + 7)
|
||||||
@ -0,0 +1,36 @@
|
|||||||
|
From: David Bauer <mail@david-bauer.net>
|
||||||
|
Date: Tue, 19 Dec 2017 02:32:47 +0100
|
||||||
|
Subject: ar71xx: fix Archer C7 5GHz MAC-address
|
||||||
|
|
||||||
|
The TP-Link firmware uses (primary_mac-1) as MAC-address
|
||||||
|
for the 5GHz WiFi. This applies the same behaviour to LEDE.
|
||||||
|
|
||||||
|
Currently, the MAC-address is retrieved from eth1, which
|
||||||
|
does not exist on the Archer C7 v4. As a result from this,
|
||||||
|
every C7 v4 with LEDE carries the same MAC-Address on the 5GHz WiFi.
|
||||||
|
|
||||||
|
Signed-off-by: David Bauer <mail@david-bauer.net>
|
||||||
|
|
||||||
|
diff --git a/target/linux/ar71xx/base-files/etc/hotplug.d/firmware/11-ath10k-caldata b/target/linux/ar71xx/base-files/etc/hotplug.d/firmware/11-ath10k-caldata
|
||||||
|
index 96b8f6b9a4bdd6a1609a819e72ade315bccfb3c0..607bbd2c0ec4b59ba569550e9e0e87b80c7ddddb 100644
|
||||||
|
--- a/target/linux/ar71xx/base-files/etc/hotplug.d/firmware/11-ath10k-caldata
|
||||||
|
+++ b/target/linux/ar71xx/base-files/etc/hotplug.d/firmware/11-ath10k-caldata
|
||||||
|
@@ -47,6 +47,10 @@ board=$(ar71xx_board_name)
|
||||||
|
case "$FIRMWARE" in
|
||||||
|
"ath10k/cal-pci-0000:00:00.0.bin")
|
||||||
|
case $board in
|
||||||
|
+ archer-c7-v4)
|
||||||
|
+ ath10kcal_extract "art" 20480 2116
|
||||||
|
+ ath10kcal_patch_mac $(macaddr_add $(cat /sys/class/net/eth0/address) -1)
|
||||||
|
+ ;;
|
||||||
|
cf-e380ac-v1|\
|
||||||
|
cf-e380ac-v2|\
|
||||||
|
dlan-pro-1200-ac|\
|
||||||
|
@@ -92,7 +96,6 @@ case "$FIRMWARE" in
|
||||||
|
ath10kcal_extract "art" 20480 2116
|
||||||
|
ath10kcal_patch_mac $(macaddr_add $(cat /sys/class/net/eth0/address) -2)
|
||||||
|
;;
|
||||||
|
- archer-c7-v4|\
|
||||||
|
archer-c25-v1|\
|
||||||
|
tl-wdr6500-v2)
|
||||||
|
ath10kcal_extract "art" 20480 2116
|
||||||
@ -184,6 +184,9 @@ device tp-link-archer-c7-v2 archer-c7-v2
|
|||||||
packages $ATH10K_PACKAGES
|
packages $ATH10K_PACKAGES
|
||||||
factory -squashfs-factory${GLUON_REGION:+-${GLUON_REGION}} .bin
|
factory -squashfs-factory${GLUON_REGION:+-${GLUON_REGION}} .bin
|
||||||
|
|
||||||
|
device tp-link-archer-c7-v4 archer-c7-v4
|
||||||
|
packages $ATH10K_PACKAGES
|
||||||
|
|
||||||
if [ "$BROKEN" ]; then
|
if [ "$BROKEN" ]; then
|
||||||
device tp-link-archer-c25-v1 archer-c25-v1 # instability with 5GHz mesh in some environments
|
device tp-link-archer-c25-v1 archer-c25-v1 # instability with 5GHz mesh in some environments
|
||||||
packages $ATH10K_PACKAGES_QCA9887
|
packages $ATH10K_PACKAGES_QCA9887
|
||||||
|
|||||||
Loading…
Reference in New Issue
Block a user