diff --git a/docs/user/supported_devices.rst b/docs/user/supported_devices.rst index 6e78ff56..5c788cdd 100644 --- a/docs/user/supported_devices.rst +++ b/docs/user/supported_devices.rst @@ -45,6 +45,7 @@ ath79-generic - OM2P-LC - OM5P - OM5P-AC (v1, v2) + - OM5P-AN * Plasma Cloud diff --git a/patches/openwrt/0010-ath79-Add-support-for-OpenMesh-OM5P-AN.patch b/patches/openwrt/0010-ath79-Add-support-for-OpenMesh-OM5P-AN.patch new file mode 100644 index 00000000..bfa278de --- /dev/null +++ b/patches/openwrt/0010-ath79-Add-support-for-OpenMesh-OM5P-AN.patch @@ -0,0 +1,365 @@ +From: Sven Eckelmann +Date: Mon, 23 Nov 2020 13:41:34 +0100 +Subject: ath79: Add support for OpenMesh OM5P-AN + +Device specifications: +====================== + +* Qualcomm/Atheros AR9344 rev 2 +* 560/450/225 MHz (CPU/DDR/AHB) +* 64 MB of RAM +* 16 MB of SPI NOR flash + - 2x 7 MB available; but one of the 7 MB regions is the recovery image +* 1T1R 2.4 GHz Wi-Fi +* 2T2R 5 GHz Wi-Fi +* 6x GPIO-LEDs (3x wifi, 2x ethernet, 1x power) +* 1x GPIO-button (reset) +* external h/w watchdog (enabled by default) +* TTL pins are on board (arrow points to VCC, then follows: GND, TX, RX) +* TI tmp423 (package kmod-hwmon-tmp421) for temperature monitoring +* 2x ethernet + - eth0 + + AR8035 ethernet PHY + + 10/100/1000 Mbps Ethernet + + 802.3af POE + + used as LAN interface + - eth1 + + 10/100 Mbps Ethernet + + builtin switch port 1 + + 18-24V passive POE (mode B) + + used as WAN interface +* 12-24V 1A DC +* internal antennas + +Flashing instructions: +====================== + +Various methods can be used to install the actual image on the flash. +Two easy ones are: + +ap51-flash +---------- + +The tool ap51-flash (https://github.com/ap51-flash/ap51-flash) should be +used to transfer the image to the u-boot when the device boots up. + +initramfs from TFTP +------------------- + +The serial console must be used to access the u-boot shell during bootup. +It can then be used to first boot up the initramfs image from a TFTP server +(here with the IP 192.168.1.21): + + setenv serverip 192.168.1.21 + setenv ipaddr 192.168.1.1 + tftpboot 0c00000 .bin && bootm $fileaddr + +The actual sysupgrade image can then be transferred (on the LAN port) to the +device via + + scp .bin root@192.168.1.1:/tmp/ + +On the device, the sysupgrade must then be started using + + sysupgrade -n /tmp/.bin + +Signed-off-by: Sven Eckelmann +(cherry picked from commit 72ef5945508193228544bcd7fcfe81b32e8dc042) + +diff --git a/package/boot/uboot-envtools/files/ath79 b/package/boot/uboot-envtools/files/ath79 +index 08c066c3494e8ea6fa5db639e11caa6406f3c6f9..78e5fc0a2be25e1ed676ac647214f237f29b4667 100644 +--- a/package/boot/uboot-envtools/files/ath79 ++++ b/package/boot/uboot-envtools/files/ath79 +@@ -58,6 +58,7 @@ openmesh,mr900-v2|\ + openmesh,mr1750-v1|\ + openmesh,mr1750-v2|\ + openmesh,om5p|\ ++openmesh,om5p-an|\ + openmesh,om5p-ac-v1|\ + openmesh,om5p-ac-v2|\ + samsung,wam250|\ +diff --git a/target/linux/ath79/dts/ar9344_openmesh_om5p-an.dts b/target/linux/ath79/dts/ar9344_openmesh_om5p-an.dts +new file mode 100644 +index 0000000000000000000000000000000000000000..6950ba3a2936cf8c9b12a22c966dc3b9215f2227 +--- /dev/null ++++ b/target/linux/ath79/dts/ar9344_openmesh_om5p-an.dts +@@ -0,0 +1,216 @@ ++// SPDX-License-Identifier: GPL-2.0-or-later OR MIT ++ ++#include "ar9344.dtsi" ++ ++#include ++#include ++ ++/ { ++ compatible = "openmesh,om5p-an", "qca,ar9344"; ++ model = "OpenMesh OM5P-AN"; ++ ++ chosen { ++ /delete-property/ bootargs; ++ }; ++ ++ aliases { ++ led-boot = &led_power_blue; ++ led-failsafe = &led_power_blue; ++ led-running = &led_power_blue; ++ led-upgrade = &led_power_blue; ++ label-mac-device = ð0; ++ }; ++ ++ keys { ++ compatible = "gpio-keys"; ++ ++ reset { ++ label = "reset"; ++ linux,code = ; ++ gpios = <&gpio 4 GPIO_ACTIVE_LOW>; ++ }; ++ }; ++ ++ leds { ++ compatible = "gpio-leds"; ++ ++ pinctrl-names = "default"; ++ pinctrl-0 = <&led_lan_wan_blue_pin>; ++ ++ led_power_blue: power_blue { ++ label = "blue:power"; ++ gpios = <&gpio 13 GPIO_ACTIVE_LOW>; ++ default-state = "on"; ++ }; ++ ++ wan_blue { ++ label = "blue:wan"; ++ gpios = <&gpio 14 GPIO_ACTIVE_LOW>; ++ }; ++ ++ lan_blue { ++ label = "blue:lan"; ++ gpios = <&gpio 15 GPIO_ACTIVE_LOW>; ++ }; ++ ++ wifi_green { ++ label = "green:wifi"; ++ gpios = <&gpio 16 GPIO_ACTIVE_LOW>; ++ linux,default-trigger = "phy0tpt"; ++ }; ++ ++ wifi_yellow { ++ label = "yellow:wifi"; ++ gpios = <&gpio 17 GPIO_ACTIVE_LOW>; ++ }; ++ ++ wifi_red { ++ label = "red:wifi"; ++ gpios = <&gpio 19 GPIO_ACTIVE_LOW>; ++ }; ++ }; ++ ++ i2c { ++ compatible = "i2c-gpio"; ++ gpios = <&gpio 21 GPIO_ACTIVE_HIGH /* sda */ ++ &gpio 20 GPIO_ACTIVE_HIGH /* scl */ ++ >; ++ #address-cells = <1>; ++ #size-cells = <0>; ++ ++ i2c-gpio,scl-open-drain; ++ i2c-gpio,sda-open-drain; ++ ++ tmp423a@4c { ++ compatible = "ti,tmp423"; ++ reg = <0x4c>; ++ }; ++ }; ++ ++ watchdog { ++ compatible = "linux,wdt-gpio"; ++ gpios = <&gpio 11 GPIO_ACTIVE_LOW>; ++ hw_algo = "toggle"; ++ /* hw_margin_ms is actually 300s but driver limits it to 60s */ ++ hw_margin_ms = <60000>; ++ always-running; ++ }; ++}; ++ ++&ref { ++ clock-frequency = <40000000>; ++}; ++ ++&pinmux { ++ led_lan_wan_blue_pin: pinmux_lan_wan_blue_pin { ++ pinctrl-single,bits = <0xc 0x0 0xffff0000>; ++ }; ++}; ++ ++&spi { ++ status = "okay"; ++ ++ flash@0 { ++ compatible = "jedec,spi-nor"; ++ reg = <0>; ++ spi-max-frequency = <40000000>; ++ ++ /* partitions are passed via bootloader */ ++ partitions { ++ compatible = "fixed-partitions"; ++ #address-cells = <1>; ++ #size-cells = <1>; ++ ++ partition@0 { ++ label = "u-boot"; ++ reg = <0x000000 0x040000>; ++ read-only; ++ }; ++ ++ partition@40000 { ++ label = "u-boot-env"; ++ reg = <0x040000 0x010000>; ++ }; ++ ++ partition@50000 { ++ label = "custom"; ++ reg = <0x050000 0x060000>; ++ read-only; ++ }; ++ ++ partition@b0000 { ++ label = "inactive"; ++ reg = <0x0b0000 0x7a0000>; ++ }; ++ ++ partition@850000 { ++ label = "inactive2"; ++ reg = <0x850000 0x7a0000>; ++ }; ++ ++ art: partition@ff0000 { ++ label = "ART"; ++ reg = <0xff0000 0x010000>; ++ read-only; ++ }; ++ }; ++ }; ++}; ++ ++&mdio0 { ++ status = "okay"; ++ ++ phy-mask = <0x80>; ++ ++ phy7: ethernet-phy@7 { ++ reg = <7>; ++ eee-broken-100tx; ++ eee-broken-1000t; ++ }; ++}; ++ ++ð0 { ++ status = "okay"; ++ ++ pll-data = <0x02000000 0x00000101 0x00001313>; ++ ++ mtd-mac-address = <&art 0x0>; ++ ++ phy-mode = "rgmii-id"; ++ phy-handle = <&phy7>; ++ ++ gmac-config { ++ device = <&gmac>; ++ rgmii-gmac0 = <1>; ++ rxd-delay = <2>; ++ rxdv-delay = <2>; ++ switch-phy-swap = <1>; ++ }; ++}; ++ ++ð1 { ++ status = "okay"; ++ ++ mtd-mac-address = <&art 0x0>; ++ mac-address-increment = <1>; ++}; ++ ++&wmac { ++ status = "okay"; ++ ++ mtd-cal-data = <&art 0x1000>; ++ mtd-mac-address = <&art 0x0>; ++ mac-address-increment = <2>; ++}; ++ ++&pcie { ++ status = "okay"; ++ ++ wifi@0,0 { ++ compatible = "pci168c,0030"; ++ reg = <0x0000 0 0 0 0>; ++ qca,no-eeprom; ++ mtd-mac-address = <&art 0x0>; ++ mac-address-increment = <16>; ++ }; ++}; +diff --git a/target/linux/ath79/generic/base-files/etc/board.d/01_leds b/target/linux/ath79/generic/base-files/etc/board.d/01_leds +index 68ea4281a56bff44147c7792990cc1e26bc10a7c..403ca9edd940d76bf9695cc18fe0c8cdd7e22967 100755 +--- a/target/linux/ath79/generic/base-files/etc/board.d/01_leds ++++ b/target/linux/ath79/generic/base-files/etc/board.d/01_leds +@@ -261,6 +261,10 @@ openmesh,om5p-ac-v1) + ucidef_set_led_netdev "lan" "LAN" "blue:lan" "eth0" + ucidef_set_led_netdev "wan" "WAN" "blue:wan" "eth1" + ;; ++openmesh,om5p-an) ++ ucidef_set_led_netdev "lan" "LAN" "blue:lan" "eth0" ++ ucidef_set_led_switch "wan" "WAN" "blue:wan" "switch0" "0x02" ++ ;; + pcs,cr3000) + ucidef_set_led_netdev "wan" "WAN" "blue:wan" "eth1" + ucidef_set_led_switch "lan1" "LAN1" "blue:lan1" "switch0" "0x04" +diff --git a/target/linux/ath79/generic/base-files/etc/hotplug.d/firmware/10-ath9k-eeprom b/target/linux/ath79/generic/base-files/etc/hotplug.d/firmware/10-ath9k-eeprom +index cf07f138260170bcac789e617e09978776b3d2c5..fbce7d672b2306094544aacf527257e7e6a6ba8c 100644 +--- a/target/linux/ath79/generic/base-files/etc/hotplug.d/firmware/10-ath9k-eeprom ++++ b/target/linux/ath79/generic/base-files/etc/hotplug.d/firmware/10-ath9k-eeprom +@@ -125,7 +125,8 @@ case "$FIRMWARE" in + caldata_extract "art" 0x1000 0x1000 + ;; + openmesh,mr600-v1|\ +- openmesh,mr600-v2) ++ openmesh,mr600-v2|\ ++ openmesh,om5p-an) + caldata_extract "ART" 0x5000 0x440 + ;; + openmesh,om2p-v1) +diff --git a/target/linux/ath79/generic/base-files/lib/upgrade/platform.sh b/target/linux/ath79/generic/base-files/lib/upgrade/platform.sh +index 2cac42c9feaed3c0360091a5b7959e741d4a0473..67e53c5fdebf29e71b920753be829fa4e41ca207 100644 +--- a/target/linux/ath79/generic/base-files/lib/upgrade/platform.sh ++++ b/target/linux/ath79/generic/base-files/lib/upgrade/platform.sh +@@ -83,7 +83,8 @@ platform_do_upgrade() { + openmesh,om2p-lc|\ + openmesh,om5p|\ + openmesh,om5p-ac-v1|\ +- openmesh,om5p-ac-v2) ++ openmesh,om5p-ac-v2|\ ++ openmesh,om5p-an) + PART_NAME="inactive" + platform_do_upgrade_openmesh "$1" + ;; +diff --git a/target/linux/ath79/image/generic.mk b/target/linux/ath79/image/generic.mk +index 75dbc1c03b5c42b81463bf7c4ddd4aa5803afd69..000fec405e161dc4906e88dd967f73c2df95f296 100644 +--- a/target/linux/ath79/image/generic.mk ++++ b/target/linux/ath79/image/generic.mk +@@ -1832,6 +1832,15 @@ define Device/openmesh_om5p-ac-v2 + endef + TARGET_DEVICES += openmesh_om5p-ac-v2 + ++define Device/openmesh_om5p-an ++ $(Device/openmesh_common_64k) ++ SOC := ar9344 ++ DEVICE_MODEL := OM5P-AN ++ OPENMESH_CE_TYPE := OM5P ++ SUPPORTED_DEVICES += om5p-an ++endef ++TARGET_DEVICES += openmesh_om5p-an ++ + define Device/pcs_cap324 + SOC := ar9344 + DEVICE_VENDOR := PowerCloud Systems diff --git a/targets/ath79-generic b/targets/ath79-generic index 5ca21e9f..93390980 100644 --- a/targets/ath79-generic +++ b/targets/ath79-generic @@ -207,6 +207,10 @@ device('openmesh-om5p-ac-v2', 'openmesh_om5p-ac-v2', { manifest_aliases = {'openmesh-om5p-acv2'}, }) +device('openmesh-om5p-an', 'openmesh_om5p-an', { + factory = false, +}) + -- Plasma Cloud