Merge pull request #2372 from freifunk-gluon/uci-regen

Regenerate network and system UCI configs on every reconfigure, switch to role-based interface configuration

docs/dev/uplink.rst

@@ -1,5 +1,5 @@
-WAN support
-===========
+Uplink support
+==============
 
 As the WAN port of a node will be connected to a user's private network, it
 is essential that the node only uses the WAN when it is absolutely necessary.
@@ -11,11 +11,12 @@ There are two cases in which the WAN port is used:
 After the VPN connection has been established, the node should be able to reach
 the mesh's DNS servers and use these for all other name resolution.
 
-If the device does not feature a WAN port, the LAN port is configured as WAN port.
-In case such a device has multiple LAN ports, all these can be used as WAN.
-Devices, which feature a "hybrid" port (labelled as WAN/LAN), this port is used as WAN.
-
-This behavior can be reversed using the ``single_as_lan`` site.conf option.
+If a device has only a single Ethernet port (or group of ports), it will be
+used as an uplink port even when it is not labelled as "WAN" by default. This
+behavior can be controlled using the ``interfaces.single.default_roles``
+site.conf option. It is also possible to alter the interface assignment after
+installation by modifying ``/etc/config/gluon`` and running
+``gluon-reconfigure``.
 
 Routing tables
 ~~~~~~~~~~~~~~

docs/features/multidomain.rst

@@ -130,9 +130,7 @@ site.conf only variables
   - authorized_keys
   - default_domain
   - poe_passthrough
-  - mesh_on_wan
-  - mesh_on_lan
-  - single_as_lan
+  - interfaces.*.default_roles
   - setup_mode.skip
   - autoupdater.branch
   - mesh_vpn.enabled

docs/features/private-wlan.rst

@@ -1,8 +1,8 @@
 Private WLAN
 ============
 
-It is possible to set up a private WLAN that bridges the WAN port and is separated from the mesh network.
-Please note that you should not enable ``mesh_on_wan`` simultaneously.
+It is possible to set up a private WLAN that bridges the uplink port and is separated from the mesh network.
+Please note that you should not enable Wired Mesh on the uplink port at the same time.
 
 The private WLAN is encrypted using WPA2 by default. On devices with enough flash and a supported radio,
 WPA3 or WPA2/WPA3 mixed-mode can be used instead of WPA2. For this to work, the ``wireless-encryption-wpa3``

docs/features/wired-mesh.rst

@@ -50,8 +50,8 @@ Configuration
 Both Mesh-on-WAN and Mesh-on-LAN can be configured on the "Network" page
 of the *Advanced settings* (if the package ``gluon-web-network`` is installed).
 
-It is also possible to enable Mesh-on-WAN and Mesh-on-LAN by default by
-adding ``mesh_on_wan = true`` and ``mesh_on_lan = true`` to ``site.conf``.
+It is also possible to enable Mesh-on-WAN and Mesh-on-LAN by default by adding
+the ``mesh`` role to the ``interfaces.*.default_roles`` options in site.conf.
 
 Commandline
 ===========

docs/index.rst

@@ -39,7 +39,7 @@ Several Freifunk communities in Germany use Gluon as the foundation of their Fre
    dev/hardware
    dev/packages
    dev/upgrade
-   dev/wan
+   dev/uplink
    dev/mac_addresses
    dev/site_library
    dev/build

docs/user/site.rst

@@ -399,17 +399,49 @@ mesh_vpn
       },
     }
 
-mesh_on_wan \: optional
-  Enables the mesh on the WAN port (``true`` or ``false``).
+interfaces \: optional
+  Default setup for Ethernet ports.
   ::
 
-    mesh_on_wan = true,
+    interfaces = {
+      lan = {
+        default_roles = { 'client', 'mesh' },
+      },
+      wan = {
+        default_roles = { 'uplink', 'mesh' },
+      },
+      single = {
+        default_roles = { 'uplink', 'mesh' },
+      },
+    },
 
-mesh_on_lan \: optional
-  Enables the mesh on the LAN port (``true`` or ``false``).
-  ::
+  For devices that have two distinct Ethernet ports or port groups (often
+  labelled WAN and LAN), the ``lan`` and ``wan`` sections are used. When there
+  is only one port (group), ``single`` is used instead.
 
-    mesh_on_lan = true,
+  Available interface roles:
+
+  - ``client``: Port allows regular clients to connect to the mesh
+  - ``uplink``: Port is used to establish Mesh VPN connections
+  - ``mesh``: Wired meshing to another Gluon or Gluon-compatible node
+
+  The ``client`` role requires exclusive control over an interface. When
+  the ``client`` role is assigned to an interface at the same time as other
+  roles (like ``'client', 'mesh'`` in the above example), the other roles take
+  precedence (enabling ``mesh``, but not ``client`` in the example).
+
+  Such a default configuration still fulfills a purpose (and is in fact the
+  recommended way to enable "Mesh-on-LAN" by default): The "LAN interface
+  meshing" checkbox in the advanced network settings will only add or remove
+  the ``mesh`` role, so the ``client`` role must already be in the configuration
+  to make the LAN port a regular client interface when the checkbox is disabled.
+
+  All interface settings are optional. If unset, the following defaults are
+  used:
+
+  - ``lan``: ``{ 'client' }``
+  - ``wan``: ``{ 'uplink' }``
+  - ``single``: Same as ``wan``
 
 poe_passthrough \: optional
   Enable PoE passthrough by default on hardware with such a feature.

package/gluon-client-bridge/luasrc/lib/gluon/upgrade/300-gluon-client-bridge-network

@@ -6,26 +6,9 @@ local util = require 'gluon.util'
 local uci = require('simple-uci').cursor()
 
 
-local interfaces = uci:get('network', 'client', 'ifname') or {}
-
-if type(interfaces) == 'string' then
-	local ifname = interfaces
-	interfaces = {}
-	for iface in ifname:gmatch('%S+') do
-		util.add_to_set(interfaces, iface)
-	end
-end
-
-if sysconfig.lan_ifname and uci:get_bool('network', 'mesh_lan', 'disabled') then
-	for lanif in sysconfig.lan_ifname:gmatch('%S+') do
-		util.add_to_set(interfaces, lanif)
-	end
-end
-
+local interfaces = util.get_role_interfaces(uci, 'client', true)
 util.add_to_set(interfaces, 'local-port')
 
-
-uci:delete('network', 'client')
 uci:section('network', 'interface', 'client', {
 	type = 'bridge',
 	ifname = interfaces,

package/gluon-client-bridge/luasrc/lib/gluon/upgrade/310-gluon-client-bridge-local-node

@@ -10,7 +10,6 @@ local uci = require('simple-uci').cursor()
 local next_node = site.next_node({})
 
 
-uci:delete('network', 'local_node_dev')
 uci:section('network', 'device', 'local_node_dev', {
 	type = 'veth',
 	name = 'local-node',
@@ -31,7 +30,6 @@ if next_node.ip6 then
 	ip6 = next_node.ip6 .. '/128'
 end
 
-uci:delete('network', 'local_node')
 uci:section('network', 'interface', 'local_node', {
 	ifname = 'local-node',
 	proto = 'static',

package/gluon-core/check_site.lua

@@ -74,6 +74,11 @@ need_string_match(in_domain({'next_node', 'ip4'}), '^%d+.%d+.%d+.%d+$', false)
 
 need_boolean(in_domain({'mesh', 'vxlan'}), false)
 
-need_boolean(in_site({'mesh_on_wan'}), false)
-need_boolean(in_site({'mesh_on_lan'}), false)
-need_boolean(in_site({'single_as_lan'}), false)
+local interfaces_roles = {'client', 'uplink', 'mesh'}
+for _, config in ipairs({'wan', 'lan', 'single'}) do
+	need_array_of(in_site({'interfaces', config, 'default_roles'}), interfaces_roles, false)
+end
+
+obsolete({'mesh_on_wan'}, 'Use interfaces.wan.default_roles.')
+obsolete({'mesh_on_lan'}, 'Use interfaces.lan.default_roles.')
+obsolete({'single_as_lan'}, 'Use interfaces.single.default_roles.')

package/gluon-core/files/lib/gluon/upgrade/001-reset-uci

@@ -0,0 +1,23 @@
+#!/bin/sh
+
+NETWORK_CFG='/etc/config/network'
+NETWORK_SAVED="${NETWORK_CFG}_gluon-old"
+
+SYSTEM_CFG='/etc/config/system'
+SYSTEM_SAVED="${SYSTEM_CFG}_gluon-old"
+
+# Make sure everything is saved before we move away the config files
+uci commit
+
+# Save old configs (unless there is already a saved config,
+# which means that the previous upgrade was interrupted)
+if [ -s "$NETWORK_CFG" ] && ! [ -s "$NETWORK_SAVED" ]; then
+	mv -f "$NETWORK_CFG" "$NETWORK_SAVED"
+fi
+if [ -s "$SYSTEM_CFG" ] && ! [ -s "$SYSTEM_SAVED" ]; then
+	mv -f "$SYSTEM_CFG" "$SYSTEM_SAVED"
+fi
+
+# Generate a new network config
+rm -f /etc/board.json "$NETWORK_CFG" "$SYSTEM_CFG"
+config_generate

package/gluon-core/files/lib/gluon/upgrade/998-commit

@@ -4,3 +4,6 @@ uci -q batch <<-EOF
 	delete gluon.core.reconfigure
 	commit
 EOF
+
+# New config is saved, we can delete the old one
+rm -f /etc/config/*_gluon-old

package/gluon-core/luasrc/lib/gluon/upgrade/002-migrate-system

@@ -0,0 +1,31 @@
+#!/usr/bin/lua
+
+local uci = require('simple-uci').cursor()
+
+-- Migrate system section
+local system = uci:get_all('system_gluon-old', '@system[0]')
+if system then
+	uci:tset('system', '@system[0]', system)
+end
+
+-- Migrate ntp section
+local ntp = uci:get_all('system_gluon-old', 'ntp')
+if ntp then
+	uci:tset('system', 'ntp', ntp)
+end
+
+-- Migrate gpio_switch sections
+--
+-- Only the value is copied from the old config, so updates to names and
+-- pins are preserved
+uci:foreach('system', 'gpio_switch', function(s)
+	local name = s['.name']
+	local value = uci:get('system_gluon-old', name, 'value')
+	if value then
+		uci:set('system', name, 'value', value)
+	end
+end)
+
+-- No other sections are migrated, so updated LED and RSSI configs can take effect
+
+uci:save('system')

package/gluon-core/luasrc/lib/gluon/upgrade/020-interfaces

@@ -1,15 +1,7 @@
 #!/usr/bin/lua
 
-local sysconfig = require 'gluon.sysconfig'
-
--- Are we already set up?
-if sysconfig.lan_ifname or sysconfig.wan_ifname then
-	os.exit(0)
-end
-
-
 local platform = require 'gluon.platform'
-local site = require 'gluon.site'
+local sysconfig = require 'gluon.sysconfig'
 
 local json = require 'jsonc'
 local uci = require('simple-uci').cursor()
@@ -69,19 +61,15 @@ end
 if wan_ifname and lan_ifname then
 	sysconfig.wan_ifname = wan_ifname
 	sysconfig.lan_ifname = lan_ifname
+	sysconfig.single_ifname = nil
 else
-	local single_ifname = lan_ifname or wan_ifname
-	if site.single_as_lan(false) then
-		sysconfig.lan_ifname = single_ifname
-	else
-		sysconfig.wan_ifname = single_ifname
-	end
+	sysconfig.wan_ifname = nil
+	sysconfig.lan_ifname = nil
+	sysconfig.single_ifname = lan_ifname or wan_ifname
 end
 
 
-uci:delete('network', 'lan')
-uci:delete('network', 'wan')
-
 uci:delete_all('network', 'device')
+uci:delete_all('network', 'interface')
 
 uci:save('network')

package/gluon-core/luasrc/lib/gluon/upgrade/021-interface-roles

@@ -0,0 +1,66 @@
+#!/usr/bin/lua
+
+local site = require 'gluon.site'
+local sysconfig = require 'gluon.sysconfig'
+local uci = require('simple-uci').cursor()
+local util = require 'gluon.util'
+
+-- Defaults from site.conf
+local roles = {
+	lan = site.interfaces.lan.roles({'client'}),
+	wan = site.interfaces.wan.roles({'uplink'}),
+}
+roles.single = site.interfaces.single.roles(roles.wan)
+
+-- Migration of Mesh-on-WAN/LAN setting from Gluon 2021.1 and older (to be removed in 2024)
+--
+-- Wired meshing is enabled for single interfaces if either of the settings
+-- was previously enabled
+local mesh_lan_disabled = uci:get('network_gluon-old', 'mesh_lan', 'disabled')
+local mesh_wan_disabled = uci:get('network_gluon-old', 'mesh_wan', 'disabled')
+if mesh_wan_disabled == '0' then
+	util.add_to_set(roles.wan, 'mesh')
+	util.add_to_set(roles.single, 'mesh')
+elseif mesh_wan_disabled == '1' then
+	util.remove_from_set(roles.wan, 'mesh')
+	util.remove_from_set(roles.single, 'mesh')
+end
+if mesh_lan_disabled == '0' then
+	util.add_to_set(roles.lan, 'mesh')
+	util.add_to_set(roles.single, 'mesh')
+elseif mesh_lan_disabled == '1' then
+	util.remove_from_set(roles.lan, 'mesh')
+	util.remove_from_set(roles.single, 'mesh')
+end
+
+-- Migration of single to WAN/LAN or vice-versa (an interface was added or removed)
+-- We identify the WAN with the single interface in this case
+--
+-- These settings only take effect when the section that is the target of the
+-- migration does not exist yet.
+if uci:get('gluon', 'iface_wan') then
+	roles.single = uci:get_list('gluon', 'iface_wan', 'role')
+end
+if uci:get('gluon', 'iface_single') then
+	roles.wan = uci:get_list('gluon', 'iface_single', 'role')
+end
+
+-- Non-existing interfaces are nil, so they will not be added to the table
+local interfaces = {
+	lan = sysconfig.lan_ifname,
+	wan = sysconfig.wan_ifname,
+	single = sysconfig.single_ifname,
+}
+
+for iface in pairs(interfaces) do
+	local section_name = 'iface_' .. iface
+	if not uci:get('gluon', section_name) then
+		uci:section('gluon', 'interface', section_name, {
+			-- / prefix refers to sysconfig ifnames
+			name = '/' .. iface,
+			role = roles[iface],
+		})
+	end
+end
+
+uci:save('gluon')

package/gluon-core/luasrc/lib/gluon/upgrade/110-network

@@ -1,11 +1,24 @@
 #!/usr/bin/lua
 
 local uci = require('simple-uci').cursor()
-local sysconfig = require 'gluon.sysconfig'
+local util = require 'gluon.util'
 
+local wan = uci:get_all('network_gluon-old', 'wan') or {}
+local wan6 = uci:get_all('network_gluon-old', 'wan6') or {}
+
+uci:section('network', 'interface', 'loopback', {
+	ifname = 'lo',
+	proto = 'static',
+	ipaddr = '127.0.0.1',
+	netmask = '255.0.0.0',
+})
 
 uci:section('network', 'interface', 'wan', {
-	ifname = sysconfig.wan_ifname,
+	proto = wan.proto or 'dhcp',
+	ipaddr = wan.ipaddr,
+	netmask = wan.netmask,
+	gateway = wan.gateway,
+	ifname = util.get_role_interfaces(uci, 'uplink'),
 	type = 'bridge',
 	igmp_snooping = true,
 	multicast_querier = false,
@@ -13,12 +26,10 @@ uci:section('network', 'interface', 'wan', {
 	auto = true,
 })
 
-if not uci:get('network', 'wan', 'proto') then
-	uci:set('network', 'wan', 'proto', 'dhcp')
-end
-
-
 uci:section('network', 'interface', 'wan6', {
+	proto = wan6.proto or 'dhcpv6',
+	ip6addr = wan6.ip6addr,
+	ip6gw = wan6.ip6gw,
 	ifname = 'br-wan',
 	peerdns = false,
 	ip6table = 1,
@@ -26,11 +37,6 @@ uci:section('network', 'interface', 'wan6', {
 	reqprefix = 'no',
 })
 
-if not uci:get('network', 'wan6', 'proto') then
-	uci:set('network', 'wan6', 'proto', 'dhcpv6')
-end
-
-
 uci:section('network', 'rule6', 'wan6_lookup', {
 	mark = '0x01/0x01',
 	lookup = 1,

package/gluon-core/luasrc/lib/gluon/upgrade/200-wireless

@@ -106,8 +106,6 @@ end
 local function delete_ibss(radio_name)
 	local name = 'ibss_' .. radio_name
 
-	uci:delete('network', name)
-	uci:delete('network', name .. '_vlan')
 	uci:delete('wireless', name)
 end
 
@@ -118,8 +116,6 @@ local function configure_mesh(config, radio, index, suffix, disabled)
 	local macfilter = uci:get('wireless', name, 'macfilter')
 	local maclist = uci:get('wireless', name, 'maclist')
 
-	uci:delete('network', name)
-	uci:delete('network', name .. '_vlan')
 	uci:delete('wireless', name)
 
 	if not config then

package/gluon-core/luasrc/lib/gluon/upgrade/210-interface-mesh

@@ -0,0 +1,48 @@
+#!/usr/bin/lua
+
+local site = require 'gluon.site'
+local uci = require('simple-uci').cursor()
+local util = require 'gluon.util'
+
+local mesh_interfaces = util.get_role_interfaces(uci, 'mesh')
+local uplink_interfaces = util.get_role_interfaces(uci, 'uplink')
+
+local mesh_interfaces_uplink = {}
+local mesh_interfaces_other = {}
+for _, iface in ipairs(mesh_interfaces) do
+	if util.contains(uplink_interfaces, iface) then
+		table.insert(mesh_interfaces_uplink, iface)
+	else
+		table.insert(mesh_interfaces_other, iface)
+	end
+end
+
+if #mesh_interfaces_uplink > 0 then
+	uci:section('network', 'interface', 'mesh_uplink', {
+		ifname = 'br-wan',
+		proto = 'gluon_wired',
+		index = 0,
+		vxlan = site.mesh.vxlan(true),
+	})
+end
+
+if #mesh_interfaces_other > 0 then
+	local iftype, ifname
+	if #mesh_interfaces_other == 1 then
+		ifname = mesh_interfaces_other[1]
+	else
+		iftype = 'bridge'
+		ifname = mesh_interfaces_other
+	end
+
+	uci:section('network', 'interface', 'mesh_other', {
+		ifname = ifname,
+		type = iftype,
+		igmp_snooping = false,
+		proto = 'gluon_wired',
+		index = 4,
+		vxlan = site.mesh.vxlan(true),
+	})
+end
+
+uci:save('network')

package/gluon-core/luasrc/lib/gluon/upgrade/210-interface-wan

@@ -1,25 +0,0 @@
-#!/usr/bin/lua
-
-local site = require 'gluon.site'
-local uci = require('simple-uci').cursor()
-
-uci:section('network', 'interface', 'mesh_wan', {
-	ifname = 'br-wan',
-	proto  = 'gluon_wired',
-	index  = 0,
-	vxlan  = site.mesh.vxlan(true),
-})
-
-local enable = site.mesh_on_wan(false)
-local old_auto = uci:get('network', 'mesh_wan', 'auto')
-local old_disabled = uci:get('network', 'mesh_wan', 'disabled')
-if old_auto ~= nil or old_disabled ~= nil then
-	enable = old_auto ~= '0' and old_disabled ~= '1'
-end
-uci:set('network', 'mesh_wan', 'disabled', not enable)
-
-if uci:get('network', 'mesh_wan', 'transitive') == nil then
-	uci:set('network', 'mesh_wan', 'transitive', true)
-end
-
-uci:save('network')

package/gluon-core/luasrc/lib/gluon/upgrade/220-interface-lan

@@ -1,53 +0,0 @@
-#!/usr/bin/lua
-
-local site = require 'gluon.site'
-local util = require 'gluon.util'
-local sysconfig = require 'gluon.sysconfig'
-
-local uci = require('simple-uci').cursor()
-
-if not sysconfig.lan_ifname then
-	os.exit(0)
-end
-
-uci:section('network', 'interface', 'mesh_lan', {
-	ifname        = sysconfig.lan_ifname,
-	igmp_snooping = false,
-	proto         = 'gluon_wired',
-	index         = 4,
-	vxlan         = site.mesh.vxlan(true),
-})
-
-if sysconfig.lan_ifname:match(' ') then
-	uci:set('network', 'mesh_lan', 'type', 'bridge')
-else
-	uci:delete('network', 'mesh_lan', 'type')
-end
-
-local enable = site.mesh_on_lan(false)
-local old_auto = uci:get('network', 'mesh_lan', 'auto')
-local old_disabled = uci:get('network', 'mesh_lan', 'disabled')
-if old_auto ~= nil or old_disabled ~= nil then
-	enable = old_auto ~= '0' and old_disabled ~= '1'
-end
-
-if enable then
-	local interfaces = uci:get_list('network', 'client', 'ifname')
-
-	if interfaces then
-		for lanif in sysconfig.lan_ifname:gmatch('%S+') do
-			if util.contains(interfaces, lanif) then
-				enable = false
-				break
-			end
-		end
-	end
-end
-
-uci:set('network', 'mesh_lan', 'disabled', not enable)
-
-if uci:get('network', 'mesh_lan', 'transitive') == nil then
-	uci:set('network', 'mesh_lan', 'transitive', true)
-end
-
-uci:save('network')

package/gluon-core/luasrc/lib/gluon/upgrade/300-firewall-rules

@@ -86,9 +86,9 @@ local wired_mesh_ifaces = {}
 uci:foreach('network', 'interface',
 	function(iface)
 		-- Select all interfaces with proto gluon_wired except for
-		-- mesh_wan into this zone, as mesh_wan is the same
+		-- mesh_uplink into this zone, as mesh_uplink is the same
 		-- interface as wan, which has its own zone
-		if iface['proto'] == 'gluon_wired' and iface['.name'] ~= 'mesh_wan' then
+		if iface['proto'] == 'gluon_wired' and iface['.name'] ~= 'mesh_uplink' then
 			table.insert(wired_mesh_ifaces, iface['.name'])
 		end
 	end

package/gluon-core/luasrc/lib/gluon/upgrade/997-migrate-preserved

@@ -0,0 +1,19 @@
+#!/usr/bin/lua
+
+local uci = require('simple-uci').cursor()
+
+for _, config in ipairs({'system', 'network'}) do
+	uci:foreach(config .. '_gluon-old', nil, function(s)
+		if s.gluon_preserve ~= '1' then return end
+
+		-- Unnamed sections can't be preserved
+		if s['.anonymous'] then return end
+
+		-- We don't allow overwriting existing sections
+		if uci:get(config, s['.name']) then return end
+
+		uci:section(config, s['.type'], s['.name'], s)
+	end)
+
+	uci:save(config)
+end

package/gluon-core/luasrc/usr/lib/lua/gluon/sysconfig.lua

@@ -11,6 +11,10 @@ local function get(_, name)
 end
 
 local function set(_, name, val)
+	if val == get(nil, name) then
+		return
+	end
+
 	if val then
 		local f = io.open(sysconfigdir .. name, 'w+')
 		f:write(val, '\n')

package/gluon-core/luasrc/usr/lib/lua/gluon/util.lua

@@ -138,6 +138,34 @@ function M.get_mesh_devices(uconn)
 	return devices
 end
 
+-- Returns a list of all interfaces with a given role
+--
+-- If exclusive is set to true, only interfaces that have no other role
+-- are returned; this is used to ensure that the client role is not active
+-- at the same time as any other role
+function M.get_role_interfaces(uci, role, exclusive)
+	local ret = {}
+
+	local function add(name)
+		-- Interface names with a / prefix refer to sysconfig interfaces
+		-- (lan_ifname/wan_ifname/single_ifname)
+		if string.sub(name, 1, 1) == '/' then
+			name = sysconfig[string.sub(name, 2) .. '_ifname'] or ''
+		end
+		for iface in string.gmatch(name, '%S+') do
+			M.add_to_set(ret, iface)
+		end
+	end
+
+	uci:foreach('gluon', 'interface', function(s)
+		if M.contains(s.role, role) and (not exclusive or #s.role == 1) then
+			add(s.name)
+		end
+	end)
+
+	return ret
+end
+
 -- Safe glob: returns an empty table when the glob fails because of
 -- a non-existing path
 function M.glob(pattern)

package/gluon-mesh-babel/luasrc/lib/gluon/upgrade/430-gluon-mesh-babel-add-mmfd-interface

@@ -2,7 +2,6 @@
 
 local uci = require('simple-uci').cursor()
 
-uci:delete('network', 'mmfd')
 uci:section('network', 'interface', 'mmfd', {
 	proto = 'static',
 	ifname = 'mmfd0',

package/gluon-mesh-batman-adv/luasrc/lib/gluon/upgrade/310-gluon-mesh-batman-adv-mesh

@@ -9,14 +9,12 @@ local uci = require('simple-uci').cursor()
 uci:delete('batman-adv', 'bat0')
 uci:save('batman-adv')
 
-local gw_mode = uci:get('network', 'gluon_bat0', 'gw_mode') or 'client'
-uci:delete('network', 'gluon_bat0')
+local gw_mode = uci:get('network_gluon-old', 'gluon_bat0', 'gw_mode') or 'client'
 uci:section('network', 'interface', 'gluon_bat0', {
 	proto = 'gluon_bat0',
 	gw_mode = gw_mode,
 })
 
-uci:delete('network', 'bat0')
 uci:section('network', 'interface', 'bat0', {
 	ifname = 'bat0',
 	proto = 'none',

package/gluon-mesh-batman-adv/luasrc/lib/gluon/upgrade/320-gluon-mesh-batman-adv-client-bridge

@@ -21,7 +21,6 @@ uci:section('network', 'interface', 'client', {
 	query_response_interval = 500,
 })
 
-uci:delete('network', 'local_node_route6')
 uci:section('network', 'route6', 'local_node_route6', {
 	interface = 'client',
 	target = site.prefix6(),

package/gluon-mesh-batman-adv/luasrc/lib/gluon/upgrade/330-gluon-mesh-batman-adv-mac-addresses

@@ -8,8 +8,8 @@ local uci = require('simple-uci').cursor()
 -- fix up potentially duplicate MAC addresses (for meshing)
 if not site.mesh.vxlan(true) then
 	uci:set('network', 'wan', 'macaddr', util.generate_mac(0))
-else
-	uci:delete('network', 'wan', 'macaddr')
 end
-uci:set('network', 'mesh_lan', 'macaddr', util.generate_mac(4))
+if uci:get('network', 'mesh_other') then
+	uci:set('network', 'mesh_other', 'macaddr', util.generate_mac(4))
+end
 uci:save('network')

package/gluon-mesh-vpn-wireguard/luasrc/lib/gluon/upgrade/400-mesh-vpn-wireguard

@@ -3,7 +3,7 @@
 local uci = require('simple-uci').cursor()
 local site = require 'gluon.site'
 
-local private_key = uci:get("network", 'wg_mesh', "private_key")
+local private_key = uci:get("network_gluon-old", 'wg_mesh', "private_key")
 
 if not private_key or not private_key:match("^" .. ("[%a%d+/]"):rep(42) .. "[AEIMQUYcgkosw480]=$") then
   private_key = "generate"

package/gluon-setup-mode/luasrc/lib/gluon/upgrade/320-setup-ifname

@@ -3,13 +3,8 @@
 local platform = require 'gluon.platform'
 local sysconfig = require 'gluon.sysconfig'
 
-
-if sysconfig.setup_ifname then
-	os.exit(0)
-end
-
 if platform.is_outdoor_device() then
-	sysconfig.setup_ifname = sysconfig.wan_ifname or sysconfig.lan_ifname
+	sysconfig.setup_ifname = sysconfig.single_ifname or sysconfig.wan_ifname
 else
-	sysconfig.setup_ifname = sysconfig.lan_ifname or sysconfig.wan_ifname
+	sysconfig.setup_ifname = sysconfig.single_ifname or sysconfig.lan_ifname
 end

package/gluon-web-network/i18n/de.po

@@ -28,6 +28,9 @@ msgstr "PoE-Passthrough aktivieren"
 msgid "Enable PoE Power Port %s"
 msgstr "PoE-Ausgabe auf Port %s aktivieren"
 
+msgid "Enable meshing on the Ethernet interface"
+msgstr "Mesh auf dem Ethernet-Port aktivieren"
+
 msgid "Enable meshing on the LAN interface"
 msgstr "Mesh auf dem LAN-Port aktivieren"
 

package/gluon-web-network/i18n/fr.po

@@ -28,6 +28,9 @@ msgstr ""
 msgid "Enable PoE Power Port %s"
 msgstr ""
 
+msgid "Enable meshing on the Ethernet interface"
+msgstr ""
+
 msgid "Enable meshing on the LAN interface"
 msgstr "Activer le réseau MESH sur le port LAN"
 

package/gluon-web-network/i18n/gluon-web-network.pot

@@ -19,6 +19,9 @@ msgstr ""
 msgid "Enable PoE Power Port %s"
 msgstr ""
 
+msgid "Enable meshing on the Ethernet interface"
+msgstr ""
+
 msgid "Enable meshing on the LAN interface"
 msgstr ""
 

package/gluon-web-network/luasrc/lib/gluon/config-mode/model/admin/network.lua

@@ -76,35 +76,36 @@ end
 
 s = f:section(Section)
 
-local mesh_wan = s:option(Flag, "mesh_wan", translate("Enable meshing on the WAN interface"))
-mesh_wan.default = not uci:get_bool("network", "mesh_wan", "disabled")
+local wired_mesh_help = {
+	single = translate('Enable meshing on the Ethernet interface'),
+	wan = translate('Enable meshing on the WAN interface'),
+	lan = translate('Enable meshing on the LAN interface'),
+}
 
-function mesh_wan:write(data)
-	uci:set("network", "mesh_wan", "disabled", not data)
-end
+local function wired_mesh(iface)
+	if not sysconfig[iface .. '_ifname'] then return end
+	local iface_roles = uci:get_list('gluon', 'iface_' .. iface, 'role')
 
-if sysconfig.lan_ifname then
-	s = f:section(Section)
+	local option = s:option(Flag, 'mesh_' .. iface, wired_mesh_help[iface])
+	option.default = util.contains(iface_roles, 'mesh') ~= false
 
-	local mesh_lan = s:option(Flag, "mesh_lan", translate("Enable meshing on the LAN interface"))
-	mesh_lan.default = not uci:get_bool("network", "mesh_lan", "disabled")
-
-	function mesh_lan:write(data)
-		uci:set("network", "mesh_lan", "disabled", not data)
-
-		local interfaces = uci:get_list("network", "client", "ifname")
-
-		for lanif in sysconfig.lan_ifname:gmatch('%S+') do
+	function option:write(data)
+		local roles = uci:get_list('gluon', 'iface_' .. iface, 'role')
 		if data then
-				util.remove_from_set(interfaces, lanif)
+			util.add_to_set(roles, 'mesh')
 		else
-				util.add_to_set(interfaces, lanif)
+			util.remove_from_set(roles, 'mesh')
+		end
+		uci:set_list('gluon', 'iface_' .. iface, 'role', roles)
+
+		-- Reconfigure on next reboot
+		uci:set('gluon', 'core', 'reconfigure', true)
 	end
 end
 
-		uci:set_list("network", "client", "ifname", interfaces)
-	end
-end
+wired_mesh('single')
+wired_mesh('wan')
+wired_mesh('lan')
 
 local section
 uci:foreach("system", "gpio_switch", function(si)
@@ -160,7 +161,7 @@ function f:write()
 		uci:delete("network", "wan6", "ip6gw")
 	end
 
-
+	uci:commit('gluon')
 	uci:commit("network")
 	uci:commit('system')
 end