nils/gluon
1
0
Fork 0
Code Issues Pull Requests Packages Projects Releases Wiki Activity

ath79-generic: add support for Joy-IT JT-OR750i (#2284)

Browse Source
This commit is contained in:
David Bauer 2021-08-05 02:07:30 +02:00 committed by GitHub
parent cb7cec9214
commit a7331b5933
No known key found for this signature in database
GPG Key ID: 4AEE18F83AFDEB23
4 changed files with 279 additions and 0 deletions
Show Stats Download Patch File Download Diff File Expand all files Collapse all files

220
patches/openwrt/0023-ath79-add-support-for-Joy-IT-JT-OR750i.patch Normal file
View File

@ -0,0 +1,220 @@
From: Vincent Wiemann <vincent.wiemann@ironai.com>
Date: Sun, 20 Jun 2021 16:56:21 +0200
Subject: ath79: add support for Joy-IT JT-OR750i
Specifications:
* QCA9531, 16 MiB flash (Winbond W25Q128JVSQ), 128 MiB RAM
* 802.11n 2T2R (external antennas)
* QCA9887, 802.11ac 1T1R (connected with diplexer to one of the antennas)
* 3x 10/100 LAN, 1x 10/100 WAN
* UART header with pinout printed on PCB
Installation:
* The device comes with a bootloader installed only
* The bootloader offers DHCP and is reachable at http://10.123.123.1
* Accept the agreement and flash sysupgrade.bin
* Use Firefox if flashing does not work
TFTP recovery with static IP:
* Rename sysupgrade.bin to jt-or750i_firmware.bin
* Offer it via TFTP server at 192.168.0.66
* Keep the reset button pressed for 4 seconds after connecting power
TFTP recovery with dynamic IP:
* Rename sysupgrade.bin to jt-or750i_firmware.bin
* Offer it via TFTP server with a DHCP server running at the same address
* Keep the reset button pressed for 6 seconds after connecting power
Co-authored-by: Sebastian Schaper <openwrt@sebastianschaper.net>
Signed-off-by: Vincent Wiemann <vincent.wiemann@ironai.com>
(cherry picked from commit 55b4b3655263984b92e4b9fc515a5e6b8003c655)
diff --git a/target/linux/ath79/base-files/etc/board.d/01_leds b/target/linux/ath79/base-files/etc/board.d/01_leds
index dd0f91affa3cd9a731343a816bc666e0bbd44e99..ba8dcd430304a284296861b9e0694be42c68fe44 100755
--- a/target/linux/ath79/base-files/etc/board.d/01_leds
+++ b/target/linux/ath79/base-files/etc/board.d/01_leds
@@ -84,6 +84,9 @@ glinet,gl-ar300m-lite)
glinet,gl-x750)
ucidef_set_led_netdev "wan" "WAN" "$boardname:green:wan" "eth1"
;;
+joyit,jt-or750i)
+ ucidef_set_led_default "ath10k" "ath10k-disable" "ath10k-phy0" "0"
+ ;;
netgear,wnr612-v2|\
on,n150r)
ucidef_set_led_netdev "wan" "WAN" "netgear:green:wan" "eth0"
diff --git a/target/linux/ath79/base-files/etc/board.d/02_network b/target/linux/ath79/base-files/etc/board.d/02_network
index 57429fbc1c851b6d8a8a03096d7043f78a489549..fba5d68eafff37bcedeb734a4d524cfb338d00fa 100755
--- a/target/linux/ath79/base-files/etc/board.d/02_network
+++ b/target/linux/ath79/base-files/etc/board.d/02_network
@@ -171,6 +171,11 @@ ath79_setup_interfaces()
ucidef_add_switch "switch0" \
"0@eth0" "1:lan" "2:lan" "3:lan" "4:lan" "5:wan"
;;
+ joyit,jt-or750i)
+ ucidef_set_interface_wan "eth1"
+ ucidef_add_switch "switch0" \
+ "0@eth0" "2:lan:3" "3:lan:2" "4:lan:1"
+ ;;
librerouter,librerouter-v1)
ucidef_add_switch "switch0" \
"0@eth0" "5:wan" "6@eth1" "4:lan"
diff --git a/target/linux/ath79/base-files/etc/hotplug.d/firmware/11-ath10k-caldata b/target/linux/ath79/base-files/etc/hotplug.d/firmware/11-ath10k-caldata
index c917f38211d0b246f064dba4b7feefecf61f5856..39205de2ec2ecd4d67a560dccfad36aab7a0aa0b 100644
--- a/target/linux/ath79/base-files/etc/hotplug.d/firmware/11-ath10k-caldata
+++ b/target/linux/ath79/base-files/etc/hotplug.d/firmware/11-ath10k-caldata
@@ -100,7 +100,8 @@ case "$FIRMWARE" in
ath10kcal_extract "art" 20480 2116
ath10kcal_patch_mac $(mtd_get_mac_ascii devdata "wlan5mac")
;;
- elecom,wrc-1750ghbk2-i)
+ elecom,wrc-1750ghbk2-i|\
+ joyit,jt-or750i)
ath10kcal_extract "art" 20480 2116
;;
engenius,ecb1750)
diff --git a/target/linux/ath79/dts/qca9531_joyit_jt-or750i.dts b/target/linux/ath79/dts/qca9531_joyit_jt-or750i.dts
new file mode 100644
index 0000000000000000000000000000000000000000..8a4d4c682380b26aa2437b26391273ddc7bf2d75
--- /dev/null
+++ b/target/linux/ath79/dts/qca9531_joyit_jt-or750i.dts
@@ -0,0 +1,120 @@
+// SPDX-License-Identifier: GPL-2.0-or-later OR MIT
+/dts-v1/;
+
+#include "qca953x.dtsi"
+
+#include <dt-bindings/gpio/gpio.h>
+#include <dt-bindings/input/input.h>
+
+/ {
+ compatible = "joyit,jt-or750i", "qca,qca9531";
+ model = "Joy-IT JT-OR750i";
+
+ aliases {
+ led-boot = &led_status_green;
+ led-failsafe = &led_status_red;
+ led-running = &led_status_green;
+ led-upgrade = &led_status_red;
+ label-mac-device = &eth0;
+ };
+
+ keys {
+ compatible = "gpio-keys";
+
+ reset {
+ label = "reset";
+ linux,code = <KEY_RESTART>;
+ gpios = <&gpio 17 GPIO_ACTIVE_LOW>;
+ };
+ };
+
+ leds {
+ compatible = "gpio-leds";
+
+ led_status_green: status_green {
+ label = "green:status";
+ gpios = <&gpio 13 GPIO_ACTIVE_LOW>;
+ default-state = "on";
+ };
+
+ led_status_red: status_red {
+ label = "red:status";
+ gpios = <&gpio 12 GPIO_ACTIVE_LOW>;
+ };
+ };
+};
+
+&pinmux {
+ pinmux_led_eth_pins: pinmux_led_eth_pins {
+ pinctrl-single,bits = \
+ /* GPIO 4: LED_LINK_5 (WAN) */ \
+ <0x04 0x0000002d 0x000000ff>, \
+ /* GPIO 14: LED_LINK_2 (LAN 3) */ \
+ /* GPIO 15: LED_LINK_3 (LAN 2) */ \
+ <0x0c 0x2b2c0000 0xffff0000>, \
+ /* GPIO 16: LED_LINK_4 (LAN 1) */ \
+ <0x10 0x0000002a 0x000000ff>;
+ };
+};
+
+&spi {
+ status = "okay";
+
+ flash@0 {
+ compatible = "jedec,spi-nor";
+ reg = <0>;
+ spi-max-frequency = <50000000>;
+
+ partitions {
+ compatible = "fixed-partitions";
+ #address-cells = <1>;
+ #size-cells = <1>;
+
+ partition@0 {
+ label = "u-boot";
+ reg = <0x0 0x40000>;
+ read-only;
+ };
+
+ partition@40000 {
+ label = "u-boot-env";
+ reg = <0x40000 0x10000>;
+ read-only;
+ };
+
+ partition@50000 {
+ label = "firmware";
+ reg = <0x50000 0xfa0000>;
+ compatible = "denx,uimage";
+ };
+
+ art: partition@ff0000 {
+ label = "art";
+ reg = <0xff0000 0x10000>;
+ read-only;
+ };
+ };
+ };
+};
+
+&eth0 {
+ status = "okay";
+
+ phy-handle = <&swphy4>;
+
+ mtd-mac-address = <&art 0x0>;
+};
+
+&eth1 {
+ mtd-mac-address = <&art 0x6>;
+};
+
+&pcie0 {
+ status = "okay";
+};
+
+&wmac {
+ status = "okay";
+
+ mtd-cal-data = <&art 0x1000>;
+};
diff --git a/target/linux/ath79/image/generic.mk b/target/linux/ath79/image/generic.mk
index 7159f9c6d2dabf0a80b4a107790471da32af97bc..080be91fe1351b45a68057de71e5cd1464773f11 100644
--- a/target/linux/ath79/image/generic.mk
+++ b/target/linux/ath79/image/generic.mk
@@ -484,6 +484,14 @@ define Device/jjplus_ja76pf2
endef
TARGET_DEVICES += jjplus_ja76pf2
+define Device/joyit_jt-or750i
+ ATH_SOC := qca9531
+ DEVICE_TITLE := Joy-IT JT-OR750i
+ DEVICE_PACKAGES := kmod-ath10k-ct ath10k-firmware-qca9887-ct
+ IMAGE_SIZE := 16000k
+endef
+TARGET_DEVICES += joyit_jt-or750i
+
define Device/librerouter_librerouter-v1
ATH_SOC := qca9558
DEVICE_TITLE := LibreRouter v1

24
patches/openwrt/0024-ath79-enable-missing-pinmux-for-JT-OR750i.patch Normal file
View File

@ -0,0 +1,24 @@
From: David Bauer <mail@david-bauer.net>
Date: Wed, 28 Jul 2021 13:52:22 +0200
Subject: ath79: enable missing pinmux for JT-OR750i
Without explicit configuration of these pins the ethernet as well as
status LED of the device do not work correctly.
Signed-off-by: David Bauer <mail@david-bauer.net>
(cherry picked from commit 4feb9a4211d4c8e118e6b8f01fa0bbd4eab5d35c)
diff --git a/target/linux/ath79/dts/qca9531_joyit_jt-or750i.dts b/target/linux/ath79/dts/qca9531_joyit_jt-or750i.dts
index 8a4d4c682380b26aa2437b26391273ddc7bf2d75..d87daddd771325a8788b59edf2159c3be7bedf07 100644
--- a/target/linux/ath79/dts/qca9531_joyit_jt-or750i.dts
+++ b/target/linux/ath79/dts/qca9531_joyit_jt-or750i.dts
@@ -31,6 +31,9 @@
leds {
compatible = "gpio-leds";
+ pinctrl-names = "default";
+ pinctrl-0 = <&jtag_disable_pins &pinmux_led_eth_pins>;
+
led_status_green: status_green {
label = "green:status";
gpios = <&gpio 13 GPIO_ACTIVE_LOW>;

26
patches/openwrt/0025-ath79-fix-JT-OR750i-switch-LED-assignment.patch Normal file
View File

@ -0,0 +1,26 @@
From: David Bauer <mail@david-bauer.net>
Date: Wed, 28 Jul 2021 14:17:13 +0200
Subject: ath79: fix JT-OR750i switch LED assignment
The LEDs for LAN1 and LAN3 were swapped. Link on port 1 would illuminate
the LED on port 3 and vice versa.
Signed-off-by: David Bauer <mail@david-bauer.net>
(cherry picked from commit f0a885ed8636b9762d12f2eb2755f63297ff0cb5)
diff --git a/target/linux/ath79/dts/qca9531_joyit_jt-or750i.dts b/target/linux/ath79/dts/qca9531_joyit_jt-or750i.dts
index d87daddd771325a8788b59edf2159c3be7bedf07..60fa922878355ebdaf7d2983fe926efdf8b97207 100644
--- a/target/linux/ath79/dts/qca9531_joyit_jt-or750i.dts
+++ b/target/linux/ath79/dts/qca9531_joyit_jt-or750i.dts
@@ -54,9 +54,9 @@
<0x04 0x0000002d 0x000000ff>, \
/* GPIO 14: LED_LINK_2 (LAN 3) */ \
/* GPIO 15: LED_LINK_3 (LAN 2) */ \
- <0x0c 0x2b2c0000 0xffff0000>, \
+ <0x0c 0x2b2a0000 0xffff0000>, \
/* GPIO 16: LED_LINK_4 (LAN 1) */ \
- <0x10 0x0000002a 0x000000ff>;
+ <0x10 0x0000002c 0x000000ff>;
};
};

9
targets/ath79-generic
View File

@ -65,6 +65,15 @@ device('gl.inet-gl-ar750s-nor', 'glinet_gl-ar750s', {
packages = ATH10K_PACKAGES_QCA9887,
})
-- JOY-IT
device('joy-it-jt-or750i', 'joyit_jt-or750i', {
packages = ATH10K_PACKAGES_QCA9887,
factory = false,
})
-- OCEDO
device('ocedo-raccoon', 'ocedo_raccoon', {