docs: renaming gluon-luci-privatewifi into gluon-luci-private-wifi

This commit is contained in:
Julian Kornberger 2014-08-07 10:41:21 +02:00
parent 547fc42ff9
commit ab7735cd5d

View File

@ -4,10 +4,9 @@ Private WLAN
It is possible to set up a private WLAN that bridges the WAN port and is seperated from the mesh network. It is possible to set up a private WLAN that bridges the WAN port and is seperated from the mesh network.
Please note that you should not enable ``mesh_on_wan`` simultaneously. Please note that you should not enable ``mesh_on_wan`` simultaneously.
The private WLAN can be enabled through the config mode if the package ``gluon-luci-privatewifi`` is installed. The private WLAN can be enabled through the config mode if the package ``gluon-luci-private-wifi`` is installed.
You may also enable a private WLAN using the command line: You may also enable a private WLAN using the command line::
::
uci set wireless.wan_radio0=wifi-iface uci set wireless.wan_radio0=wifi-iface
uci set wireless.wan_radio0.device=radio0 uci set wireless.wan_radio0.device=radio0
uci set wireless.wan_radio0.network=wan uci set wireless.wan_radio0.network=wan
@ -22,9 +21,8 @@ You may also enable a private WLAN using the command line:
Please replace ``$SSID`` by the name of the WLAN and ``$KEY`` by your passphrase (8-63 characters). Please replace ``$SSID`` by the name of the WLAN and ``$KEY`` by your passphrase (8-63 characters).
If you have two radios (e.g. 2.4 and 5 GHz) you need to do this for radio0 and radio1. If you have two radios (e.g. 2.4 and 5 GHz) you need to do this for radio0 and radio1.
It may also be disabled by running: It may also be disabled by running::
::
uci set wireless.wan_radio0.disabled=1 uci set wireless.wan_radio0.disabled=1
uci commit uci commit
wifi wifi