ath79-generic: add support for OpenMesh OM2P-HS v2
Device specifications: ====================== * Qualcomm/Atheros AR9341 rev 1 * 535/400/200 MHz (CPU/DDR/AHB) * 64 MB of RAM * 16 MB of SPI NOR flash - 2x 7 MB available; but one of the 7 MB regions is the recovery image * 2x 10/100 Mbps Ethernet * 2T2R 2.4 GHz Wi-Fi * 6x GPIO-LEDs (3x wifi, 2x ethernet, 1x power) * 1x GPIO-button (reset) * external h/w watchdog (enabled by default) * TTL pins are on board (arrow points to VCC, then follows: GND, TX, RX) * 2x fast ethernet - eth0 + 802.3af POE + builtin switch port 1 + used as LAN interface - eth1 + 18-24V passive POE (mode B) + used as WAN interface * 12-24V 1A DC * internal antennas Flashing instructions: ====================== Various methods can be used to install the actual image on the flash. Two easy ones are: ap51-flash ---------- The tool ap51-flash (https://github.com/ap51-flash/ap51-flash) should be used to transfer the image to the u-boot when the device boots up. initramfs from TFTP ------------------- The serial console must be used to access the u-boot shell during bootup. It can then be used to first boot up the initramfs image from a TFTP server (here with the IP 192.168.1.21): setenv serverip 192.168.1.21 setenv ipaddr 192.168.1.1 tftpboot 0c00000 <filename-of-initramfs-kernel>.bin && bootm $fileaddr The actual sysupgrade image can then be transferred (on the LAN port) to the device via scp <filename-of-squashfs-sysupgrade>.bin root@192.168.1.1:/tmp/ On the device, the sysupgrade must then be started using sysupgrade -n /tmp/<filename-of-squashfs-sysupgrade>.bin Gluon image name change ======================= The device had the image name "openmesh-om2phsv2" in older versions of Gluon. This had to be changed with the new name in the device trees of the ath79 device tree.
This commit is contained in:
parent
19026314d7
commit
ce324d11ec
@ -41,7 +41,7 @@ ath79-generic
|
|||||||
- MR900 (v1, v2)
|
- MR900 (v1, v2)
|
||||||
- MR1750 (v1, v2)
|
- MR1750 (v1, v2)
|
||||||
- OM2P (v1, v2, v4)
|
- OM2P (v1, v2, v4)
|
||||||
- OM2P-HS (v1)
|
- OM2P-HS (v1, v2)
|
||||||
|
|
||||||
* Plasma Cloud
|
* Plasma Cloud
|
||||||
|
|
||||||
|
@ -167,6 +167,12 @@ device('openmesh-om2p-hs-v1', 'openmesh_om2p-hs-v1', {
|
|||||||
manifest_aliases = {'openmesh-om2p-hs'},
|
manifest_aliases = {'openmesh-om2p-hs'},
|
||||||
})
|
})
|
||||||
|
|
||||||
|
device('openmesh-om2p-hs-v2', 'openmesh_om2p-hs-v2', {
|
||||||
|
factory = false,
|
||||||
|
-- old name from OpenWrt 19.07.x
|
||||||
|
manifest_aliases = {'openmesh-om2p-hsv2'},
|
||||||
|
})
|
||||||
|
|
||||||
|
|
||||||
-- Plasma Cloud
|
-- Plasma Cloud
|
||||||
|
|
||||||
|
Loading…
Reference in New Issue
Block a user