Merge pull request #2153 from FreifunkVogtland/pa300
ath79: Add support for Plasma Cloud PA300(E)
This commit is contained in:
David Bauer
GitHub
commit
db9768310a
@ -203,6 +203,11 @@ ath79-generic
|
|||||||
|
|
||||||
- Raccoon
|
- Raccoon
|
||||||
|
|
||||||
|
* Plasma Cloud
|
||||||
|
|
||||||
|
- PA300
|
||||||
|
- PA300E
|
||||||
|
|
||||||
* TP-Link
|
* TP-Link
|
||||||
|
|
||||||
- Archer C6 (v2)
|
- Archer C6 (v2)
|
||||||
|
|||||||
@ -53,6 +53,8 @@ function M.is_outdoor_device()
|
|||||||
|
|
||||||
elseif M.match('ath79', 'generic', {
|
elseif M.match('ath79', 'generic', {
|
||||||
'devolo,dvl1750x',
|
'devolo,dvl1750x',
|
||||||
|
'plasmacloud,pa300',
|
||||||
|
'plasmacloud,pa300e',
|
||||||
'tplink,cpe220-v3',
|
'tplink,cpe220-v3',
|
||||||
}) then
|
}) then
|
||||||
return true
|
return true
|
||||||
|
|||||||
@ -0,0 +1,431 @@
|
|||||||
|
From: Sven Eckelmann <sven@narfation.org>
|
||||||
|
Date: Mon, 23 Nov 2020 16:57:31 +0100
|
||||||
|
Subject: ath79: Fix fallback to bootloader cmdline on empty DT bootargs
|
||||||
|
|
||||||
|
The MIPS code is supposed to fall back to u-boots bootargs whenever the
|
||||||
|
/chosen/bootargs property is missing. But this feature was accidentally
|
||||||
|
disabled when the boot_command_line was initialized with an empty space
|
||||||
|
just to work around problems with early_init_dt_scan_chosen.
|
||||||
|
|
||||||
|
But this feature is necessary for some boards which have a dualboot
|
||||||
|
mechanism and whose u-boot is calculating the correct partition at runtime
|
||||||
|
without writing this information back to the u-boot-env.
|
||||||
|
|
||||||
|
Signed-off-by: Sven Eckelmann <sven@narfation.org>
|
||||||
|
Origin: backport, https://github.com/openwrt/openwrt/commit/727eebbad1b9dea91174ea675cb64ea13484f790
|
||||||
|
|
||||||
|
diff --git a/target/linux/ath79/patches-4.14/0038-MIPS-Setup-boot_command_line-before-plat_mem_setup.patch b/target/linux/ath79/patches-4.14/0038-MIPS-Setup-boot_command_line-before-plat_mem_setup.patch
|
||||||
|
new file mode 100644
|
||||||
|
index 0000000000000000000000000000000000000000..90d2ca7a0cb16d3f1e71779bfa551f498fd59755
|
||||||
|
--- /dev/null
|
||||||
|
+++ b/target/linux/ath79/patches-4.14/0038-MIPS-Setup-boot_command_line-before-plat_mem_setup.patch
|
||||||
|
@@ -0,0 +1,82 @@
|
||||||
|
+From: Paul Burton <paul.burton@mips.com>
|
||||||
|
+Date: Tue, 16 Jan 2018 16:47:57 +0100
|
||||||
|
+Subject: MIPS: Setup boot_command_line before plat_mem_setup
|
||||||
|
+
|
||||||
|
+Platforms using DT will typically call __dt_setup_arch from
|
||||||
|
+plat_mem_setup. This in turn calls early_init_dt_scan. When
|
||||||
|
+CONFIG_CMDLINE is set, this leads to its value being copied into
|
||||||
|
+boot_command_line by early_init_dt_scan_chosen. If this happens before
|
||||||
|
+the code setting up boot_command_line in arch_mem_init runs, that code
|
||||||
|
+will go on to append CONFIG_CMDLINE (via builtin_cmdline) to
|
||||||
|
+boot_command_line again, duplicating it. For some command line
|
||||||
|
+parameters (eg. earlycon) this can be a problem. Set up
|
||||||
|
+boot_command_line before early_init_dt_scan_chosen gets called such that
|
||||||
|
+it will not write CONFIG_CMDLINE in this scenario & the arguments aren't
|
||||||
|
+duplicated.
|
||||||
|
+
|
||||||
|
+Origin: upstream, https://git.kernel.org/pub/scm/linux/kernel/git/torvalds/linux.git/commit/?id=8ce355cf2e38afdb364d03d12b23d9cf44c3b7f1
|
||||||
|
+Signed-off-by: Paul Burton <paul.burton@mips.com>
|
||||||
|
+Acked-by: Mathieu Malaterre <malat@debian.org>
|
||||||
|
+Cc: Ralf Baechle <ralf@linux-mips.org>
|
||||||
|
+Cc: Maarten ter Huurne <maarten@treewalker.org>
|
||||||
|
+Cc: linux-mips@linux-mips.org
|
||||||
|
+Patchwork: https://patchwork.linux-mips.org/patch/18483/
|
||||||
|
+Signed-off-by: James Hogan <jhogan@kernel.org>
|
||||||
|
+
|
||||||
|
+diff --git a/arch/mips/kernel/setup.c b/arch/mips/kernel/setup.c
|
||||||
|
+index abd7ee9e90ab0dd0d01d970c84d90a2c4edf609b..c0f51fd4e0b3970e4f019094091578504e2f56eb 100644
|
||||||
|
+--- a/arch/mips/kernel/setup.c
|
||||||
|
++++ b/arch/mips/kernel/setup.c
|
||||||
|
+@@ -833,25 +833,6 @@ static void __init arch_mem_init(char **cmdline_p)
|
||||||
|
+ struct memblock_region *reg;
|
||||||
|
+ extern void plat_mem_setup(void);
|
||||||
|
+
|
||||||
|
+- /* call board setup routine */
|
||||||
|
+- plat_mem_setup();
|
||||||
|
+-
|
||||||
|
+- /*
|
||||||
|
+- * Make sure all kernel memory is in the maps. The "UP" and
|
||||||
|
+- * "DOWN" are opposite for initdata since if it crosses over
|
||||||
|
+- * into another memory section you don't want that to be
|
||||||
|
+- * freed when the initdata is freed.
|
||||||
|
+- */
|
||||||
|
+- arch_mem_addpart(PFN_DOWN(__pa_symbol(&_text)) << PAGE_SHIFT,
|
||||||
|
+- PFN_UP(__pa_symbol(&_edata)) << PAGE_SHIFT,
|
||||||
|
+- BOOT_MEM_RAM);
|
||||||
|
+- arch_mem_addpart(PFN_UP(__pa_symbol(&__init_begin)) << PAGE_SHIFT,
|
||||||
|
+- PFN_DOWN(__pa_symbol(&__init_end)) << PAGE_SHIFT,
|
||||||
|
+- BOOT_MEM_INIT_RAM);
|
||||||
|
+-
|
||||||
|
+- pr_info("Determined physical RAM map:\n");
|
||||||
|
+- print_memory_map();
|
||||||
|
+-
|
||||||
|
+ #if defined(CONFIG_CMDLINE_BOOL) && defined(CONFIG_CMDLINE_OVERRIDE)
|
||||||
|
+ strlcpy(boot_command_line, builtin_cmdline, COMMAND_LINE_SIZE);
|
||||||
|
+ #else
|
||||||
|
+@@ -879,6 +860,26 @@ static void __init arch_mem_init(char **cmdline_p)
|
||||||
|
+ }
|
||||||
|
+ #endif
|
||||||
|
+ #endif
|
||||||
|
++
|
||||||
|
++ /* call board setup routine */
|
||||||
|
++ plat_mem_setup();
|
||||||
|
++
|
||||||
|
++ /*
|
||||||
|
++ * Make sure all kernel memory is in the maps. The "UP" and
|
||||||
|
++ * "DOWN" are opposite for initdata since if it crosses over
|
||||||
|
++ * into another memory section you don't want that to be
|
||||||
|
++ * freed when the initdata is freed.
|
||||||
|
++ */
|
||||||
|
++ arch_mem_addpart(PFN_DOWN(__pa_symbol(&_text)) << PAGE_SHIFT,
|
||||||
|
++ PFN_UP(__pa_symbol(&_edata)) << PAGE_SHIFT,
|
||||||
|
++ BOOT_MEM_RAM);
|
||||||
|
++ arch_mem_addpart(PFN_UP(__pa_symbol(&__init_begin)) << PAGE_SHIFT,
|
||||||
|
++ PFN_DOWN(__pa_symbol(&__init_end)) << PAGE_SHIFT,
|
||||||
|
++ BOOT_MEM_INIT_RAM);
|
||||||
|
++
|
||||||
|
++ pr_info("Determined physical RAM map:\n");
|
||||||
|
++ print_memory_map();
|
||||||
|
++
|
||||||
|
+ strlcpy(command_line, boot_command_line, COMMAND_LINE_SIZE);
|
||||||
|
+
|
||||||
|
+ *cmdline_p = command_line;
|
||||||
|
diff --git a/target/linux/ath79/patches-4.14/0039-MIPS-Fix-CONFIG_CMDLINE-handling.patch b/target/linux/ath79/patches-4.14/0039-MIPS-Fix-CONFIG_CMDLINE-handling.patch
|
||||||
|
new file mode 100644
|
||||||
|
index 0000000000000000000000000000000000000000..ab040c459454b1670b08afa2082e06637280da52
|
||||||
|
--- /dev/null
|
||||||
|
+++ b/target/linux/ath79/patches-4.14/0039-MIPS-Fix-CONFIG_CMDLINE-handling.patch
|
||||||
|
@@ -0,0 +1,119 @@
|
||||||
|
+From: Paul Burton <paul.burton@mips.com>
|
||||||
|
+Date: Thu, 27 Sep 2018 22:59:18 +0000
|
||||||
|
+Subject: MIPS: Fix CONFIG_CMDLINE handling
|
||||||
|
+
|
||||||
|
+Commit 8ce355cf2e38 ("MIPS: Setup boot_command_line before
|
||||||
|
+plat_mem_setup") fixed a problem for systems which have
|
||||||
|
+CONFIG_CMDLINE_BOOL=y & use a DT with a chosen node that has either no
|
||||||
|
+bootargs property or an empty one. In this configuration
|
||||||
|
+early_init_dt_scan_chosen() copies CONFIG_CMDLINE into
|
||||||
|
+boot_command_line, but the MIPS code doesn't know this so it appends
|
||||||
|
+CONFIG_CMDLINE (via builtin_cmdline) to boot_command_line again. The
|
||||||
|
+result is that boot_command_line contains the arguments from
|
||||||
|
+CONFIG_CMDLINE twice.
|
||||||
|
+
|
||||||
|
+That commit took the approach of simply setting up boot_command_line
|
||||||
|
+from the MIPS code before early_init_dt_scan_chosen() runs, causing it
|
||||||
|
+not to copy CONFIG_CMDLINE to boot_command_line if a chosen node with no
|
||||||
|
+bootargs property is found.
|
||||||
|
+
|
||||||
|
+Unfortunately this is problematic for systems which do have a non-empty
|
||||||
|
+bootargs property & CONFIG_CMDLINE_BOOL=y. There
|
||||||
|
+early_init_dt_scan_chosen() will overwrite boot_command_line with the
|
||||||
|
+arguments from DT, which means we lose those from CONFIG_CMDLINE
|
||||||
|
+entirely. This breaks CONFIG_MIPS_CMDLINE_DTB_EXTEND. If we have
|
||||||
|
+CONFIG_MIPS_CMDLINE_FROM_BOOTLOADER or
|
||||||
|
+CONFIG_MIPS_CMDLINE_BUILTIN_EXTEND selected and the DT has a bootargs
|
||||||
|
+property which we should ignore, it will instead be honoured breaking
|
||||||
|
+those configurations too.
|
||||||
|
+
|
||||||
|
+Fix this by reverting commit 8ce355cf2e38 ("MIPS: Setup
|
||||||
|
+boot_command_line before plat_mem_setup") to restore the former
|
||||||
|
+behaviour, and fixing the CONFIG_CMDLINE duplication issue by
|
||||||
|
+initializing boot_command_line to a non-empty string that
|
||||||
|
+early_init_dt_scan_chosen() will not overwrite with CONFIG_CMDLINE.
|
||||||
|
+
|
||||||
|
+This is a little ugly, but cleanup in this area is on its way. In the
|
||||||
|
+meantime this is at least easy to backport & contains the ugliness
|
||||||
|
+within arch/mips/.
|
||||||
|
+
|
||||||
|
+Origin: upstream, https://git.kernel.org/pub/scm/linux/kernel/git/torvalds/linux.git/commit/?id=951d223c6c16ed5d2a71a4d1f13c1e65d6882156
|
||||||
|
+Signed-off-by: Paul Burton <paul.burton@mips.com>
|
||||||
|
+Fixes: 8ce355cf2e38 ("MIPS: Setup boot_command_line before plat_mem_setup")
|
||||||
|
+References: https://patchwork.linux-mips.org/patch/18804/
|
||||||
|
+Patchwork: https://patchwork.linux-mips.org/patch/20813/
|
||||||
|
+Cc: Frank Rowand <frowand.list@gmail.com>
|
||||||
|
+Cc: Jaedon Shin <jaedon.shin@gmail.com>
|
||||||
|
+Cc: Mathieu Malaterre <malat@debian.org>
|
||||||
|
+Cc: Rob Herring <robh+dt@kernel.org>
|
||||||
|
+Cc: devicetree@vger.kernel.org
|
||||||
|
+Cc: linux-kernel@vger.kernel.org
|
||||||
|
+Cc: linux-mips@linux-mips.org
|
||||||
|
+Cc: stable@vger.kernel.org # v4.16+
|
||||||
|
+
|
||||||
|
+diff --git a/arch/mips/kernel/setup.c b/arch/mips/kernel/setup.c
|
||||||
|
+index c0f51fd4e0b3970e4f019094091578504e2f56eb..71070ec8da136495d2efed0aa79dff44149d565f 100644
|
||||||
|
+--- a/arch/mips/kernel/setup.c
|
||||||
|
++++ b/arch/mips/kernel/setup.c
|
||||||
|
+@@ -833,6 +833,34 @@ static void __init arch_mem_init(char **cmdline_p)
|
||||||
|
+ struct memblock_region *reg;
|
||||||
|
+ extern void plat_mem_setup(void);
|
||||||
|
+
|
||||||
|
++ /*
|
||||||
|
++ * Initialize boot_command_line to an innocuous but non-empty string in
|
||||||
|
++ * order to prevent early_init_dt_scan_chosen() from copying
|
||||||
|
++ * CONFIG_CMDLINE into it without our knowledge. We handle
|
||||||
|
++ * CONFIG_CMDLINE ourselves below & don't want to duplicate its
|
||||||
|
++ * content because repeating arguments can be problematic.
|
||||||
|
++ */
|
||||||
|
++ strlcpy(boot_command_line, " ", COMMAND_LINE_SIZE);
|
||||||
|
++
|
||||||
|
++ /* call board setup routine */
|
||||||
|
++ plat_mem_setup();
|
||||||
|
++
|
||||||
|
++ /*
|
||||||
|
++ * Make sure all kernel memory is in the maps. The "UP" and
|
||||||
|
++ * "DOWN" are opposite for initdata since if it crosses over
|
||||||
|
++ * into another memory section you don't want that to be
|
||||||
|
++ * freed when the initdata is freed.
|
||||||
|
++ */
|
||||||
|
++ arch_mem_addpart(PFN_DOWN(__pa_symbol(&_text)) << PAGE_SHIFT,
|
||||||
|
++ PFN_UP(__pa_symbol(&_edata)) << PAGE_SHIFT,
|
||||||
|
++ BOOT_MEM_RAM);
|
||||||
|
++ arch_mem_addpart(PFN_UP(__pa_symbol(&__init_begin)) << PAGE_SHIFT,
|
||||||
|
++ PFN_DOWN(__pa_symbol(&__init_end)) << PAGE_SHIFT,
|
||||||
|
++ BOOT_MEM_INIT_RAM);
|
||||||
|
++
|
||||||
|
++ pr_info("Determined physical RAM map:\n");
|
||||||
|
++ print_memory_map();
|
||||||
|
++
|
||||||
|
+ #if defined(CONFIG_CMDLINE_BOOL) && defined(CONFIG_CMDLINE_OVERRIDE)
|
||||||
|
+ strlcpy(boot_command_line, builtin_cmdline, COMMAND_LINE_SIZE);
|
||||||
|
+ #else
|
||||||
|
+@@ -860,26 +888,6 @@ static void __init arch_mem_init(char **cmdline_p)
|
||||||
|
+ }
|
||||||
|
+ #endif
|
||||||
|
+ #endif
|
||||||
|
+-
|
||||||
|
+- /* call board setup routine */
|
||||||
|
+- plat_mem_setup();
|
||||||
|
+-
|
||||||
|
+- /*
|
||||||
|
+- * Make sure all kernel memory is in the maps. The "UP" and
|
||||||
|
+- * "DOWN" are opposite for initdata since if it crosses over
|
||||||
|
+- * into another memory section you don't want that to be
|
||||||
|
+- * freed when the initdata is freed.
|
||||||
|
+- */
|
||||||
|
+- arch_mem_addpart(PFN_DOWN(__pa_symbol(&_text)) << PAGE_SHIFT,
|
||||||
|
+- PFN_UP(__pa_symbol(&_edata)) << PAGE_SHIFT,
|
||||||
|
+- BOOT_MEM_RAM);
|
||||||
|
+- arch_mem_addpart(PFN_UP(__pa_symbol(&__init_begin)) << PAGE_SHIFT,
|
||||||
|
+- PFN_DOWN(__pa_symbol(&__init_end)) << PAGE_SHIFT,
|
||||||
|
+- BOOT_MEM_INIT_RAM);
|
||||||
|
+-
|
||||||
|
+- pr_info("Determined physical RAM map:\n");
|
||||||
|
+- print_memory_map();
|
||||||
|
+-
|
||||||
|
+ strlcpy(command_line, boot_command_line, COMMAND_LINE_SIZE);
|
||||||
|
+
|
||||||
|
+ *cmdline_p = command_line;
|
||||||
|
diff --git a/target/linux/ath79/patches-4.14/0040-MIPS-cmdline-Clean-up-boot_command_line-initializati.patch b/target/linux/ath79/patches-4.14/0040-MIPS-cmdline-Clean-up-boot_command_line-initializati.patch
|
||||||
|
new file mode 100644
|
||||||
|
index 0000000000000000000000000000000000000000..2cba97d5e85bb863ca95c0715110b69e4964ea51
|
||||||
|
--- /dev/null
|
||||||
|
+++ b/target/linux/ath79/patches-4.14/0040-MIPS-cmdline-Clean-up-boot_command_line-initializati.patch
|
||||||
|
@@ -0,0 +1,196 @@
|
||||||
|
+From: Paul Burton <paul.burton@mips.com>
|
||||||
|
+Date: Wed, 9 Oct 2019 23:09:45 +0000
|
||||||
|
+Subject: MIPS: cmdline: Clean up boot_command_line initialization
|
||||||
|
+
|
||||||
|
+Our current code to initialize boot_command_line is a mess. Some of this
|
||||||
|
+is due to the addition of too many options over the years, and some of
|
||||||
|
+this is due to workarounds for early_init_dt_scan_chosen() performing
|
||||||
|
+actions specific to options from other architectures that probably
|
||||||
|
+shouldn't be in generic code.
|
||||||
|
+
|
||||||
|
+Clean this up by introducing a new bootcmdline_init() function that
|
||||||
|
+simplifies the initialization somewhat. The major changes are:
|
||||||
|
+
|
||||||
|
+- Because bootcmdline_init() is a function it can return early in the
|
||||||
|
+ CONFIG_CMDLINE_OVERRIDE case.
|
||||||
|
+
|
||||||
|
+- We clear boot_command_line rather than inheriting whatever
|
||||||
|
+ early_init_dt_scan_chosen() may have left us. This means we no longer
|
||||||
|
+ need to set boot_command_line to a space character in an attempt to
|
||||||
|
+ prevent early_init_dt_scan_chosen() from copying CONFIG_CMDLINE into
|
||||||
|
+ boot_command_line without us knowing about it.
|
||||||
|
+
|
||||||
|
+- Indirection via USE_PROM_CMDLINE, USE_DTB_CMDLINE, EXTEND_WITH_PROM &
|
||||||
|
+ BUILTIN_EXTEND_WITH_PROM macros is removed; they seemingly served only
|
||||||
|
+ to obfuscate the code.
|
||||||
|
+
|
||||||
|
+- The logic is cleaner, clearer & commented.
|
||||||
|
+
|
||||||
|
+Two minor drawbacks of this approach are:
|
||||||
|
+
|
||||||
|
+1) We call of_scan_flat_dt(), which means we scan through the DT again.
|
||||||
|
+ The overhead is fairly minimal & shouldn't be noticeable.
|
||||||
|
+
|
||||||
|
+2) cmdline_scan_chosen() duplicates a small amount of the logic from
|
||||||
|
+ early_init_dt_scan_chosen(). Alternatives might be to allow the
|
||||||
|
+ generic FDT code to keep & expose a copy of the arguments taken from
|
||||||
|
+ the /chosen node's bootargs property, or to introduce a function like
|
||||||
|
+ early_init_dt_scan_chosen() that retrieves them without modification
|
||||||
|
+ to handle CONFIG_CMDLINE. Neither of these sounds particularly
|
||||||
|
+ cleaner though, and this way we at least keep the extra work in
|
||||||
|
+ arch/mips.
|
||||||
|
+
|
||||||
|
+Origin: backport, https://git.kernel.org/pub/scm/linux/kernel/git/torvalds/linux.git/commit/?id=7784cac697351f0cc0a4bb619594c0c99348c5aa
|
||||||
|
+Signed-off-by: Paul Burton <paul.burton@mips.com>
|
||||||
|
+Cc: linux-mips@vger.kernel.org
|
||||||
|
+
|
||||||
|
+diff --git a/arch/mips/kernel/setup.c b/arch/mips/kernel/setup.c
|
||||||
|
+index 71070ec8da136495d2efed0aa79dff44149d565f..c2b659a2e2ce0f2074f4fc13cd24283d66ac5594 100644
|
||||||
|
+--- a/arch/mips/kernel/setup.c
|
||||||
|
++++ b/arch/mips/kernel/setup.c
|
||||||
|
+@@ -822,26 +822,94 @@ static void __init request_crashkernel(struct resource *res)
|
||||||
|
+ }
|
||||||
|
+ #endif /* !defined(CONFIG_KEXEC) */
|
||||||
|
+
|
||||||
|
+-#define USE_PROM_CMDLINE IS_ENABLED(CONFIG_MIPS_CMDLINE_FROM_BOOTLOADER)
|
||||||
|
+-#define USE_DTB_CMDLINE IS_ENABLED(CONFIG_MIPS_CMDLINE_FROM_DTB)
|
||||||
|
+-#define EXTEND_WITH_PROM IS_ENABLED(CONFIG_MIPS_CMDLINE_DTB_EXTEND)
|
||||||
|
+-#define BUILTIN_EXTEND_WITH_PROM \
|
||||||
|
+- IS_ENABLED(CONFIG_MIPS_CMDLINE_BUILTIN_EXTEND)
|
||||||
|
++static void __init bootcmdline_append(const char *s, size_t max)
|
||||||
|
++{
|
||||||
|
++ if (!s[0] || !max)
|
||||||
|
++ return;
|
||||||
|
++
|
||||||
|
++ if (boot_command_line[0])
|
||||||
|
++ strlcat(boot_command_line, " ", COMMAND_LINE_SIZE);
|
||||||
|
++
|
||||||
|
++ strlcat(boot_command_line, s, max);
|
||||||
|
++}
|
||||||
|
++
|
||||||
|
++static int __init bootcmdline_scan_chosen(unsigned long node, const char *uname,
|
||||||
|
++ int depth, void *data)
|
||||||
|
++{
|
||||||
|
++ bool *dt_bootargs = data;
|
||||||
|
++ const char *p;
|
||||||
|
++ int l;
|
||||||
|
++
|
||||||
|
++ if (depth != 1 || !data ||
|
||||||
|
++ (strcmp(uname, "chosen") != 0 && strcmp(uname, "chosen@0") != 0))
|
||||||
|
++ return 0;
|
||||||
|
++
|
||||||
|
++ p = of_get_flat_dt_prop(node, "bootargs", &l);
|
||||||
|
++ if (p != NULL && l > 0) {
|
||||||
|
++ bootcmdline_append(p, min(l, COMMAND_LINE_SIZE));
|
||||||
|
++ *dt_bootargs = true;
|
||||||
|
++ }
|
||||||
|
++
|
||||||
|
++ return 1;
|
||||||
|
++}
|
||||||
|
++
|
||||||
|
++static void __init bootcmdline_init(char **cmdline_p)
|
||||||
|
++{
|
||||||
|
++ bool dt_bootargs = false;
|
||||||
|
++
|
||||||
|
++ /*
|
||||||
|
++ * If CMDLINE_OVERRIDE is enabled then initializing the command line is
|
||||||
|
++ * trivial - we simply use the built-in command line unconditionally &
|
||||||
|
++ * unmodified.
|
||||||
|
++ */
|
||||||
|
++ if (IS_ENABLED(CONFIG_CMDLINE_OVERRIDE)) {
|
||||||
|
++ strlcpy(boot_command_line, builtin_cmdline, COMMAND_LINE_SIZE);
|
||||||
|
++ return;
|
||||||
|
++ }
|
||||||
|
++
|
||||||
|
++ /*
|
||||||
|
++ * If the user specified a built-in command line &
|
||||||
|
++ * MIPS_CMDLINE_BUILTIN_EXTEND, then the built-in command line is
|
||||||
|
++ * prepended to arguments from the bootloader or DT so we'll copy them
|
||||||
|
++ * to the start of boot_command_line here. Otherwise, empty
|
||||||
|
++ * boot_command_line to undo anything early_init_dt_scan_chosen() did.
|
||||||
|
++ */
|
||||||
|
++ if (IS_ENABLED(CONFIG_MIPS_CMDLINE_BUILTIN_EXTEND))
|
||||||
|
++ strlcpy(boot_command_line, builtin_cmdline, COMMAND_LINE_SIZE);
|
||||||
|
++ else
|
||||||
|
++ boot_command_line[0] = 0;
|
||||||
|
++
|
||||||
|
++ /*
|
||||||
|
++ * If we're configured to take boot arguments from DT, look for those
|
||||||
|
++ * now.
|
||||||
|
++ */
|
||||||
|
++ if (IS_ENABLED(CONFIG_MIPS_CMDLINE_FROM_DTB))
|
||||||
|
++ of_scan_flat_dt(bootcmdline_scan_chosen, &dt_bootargs);
|
||||||
|
++
|
||||||
|
++ /*
|
||||||
|
++ * If we didn't get any arguments from DT (regardless of whether that's
|
||||||
|
++ * because we weren't configured to look for them, or because we looked
|
||||||
|
++ * & found none) then we'll take arguments from the bootloader.
|
||||||
|
++ * plat_mem_setup() should have filled arcs_cmdline with arguments from
|
||||||
|
++ * the bootloader.
|
||||||
|
++ */
|
||||||
|
++ if (IS_ENABLED(CONFIG_MIPS_CMDLINE_DTB_EXTEND) || !dt_bootargs)
|
||||||
|
++ bootcmdline_append(arcs_cmdline, COMMAND_LINE_SIZE);
|
||||||
|
++
|
||||||
|
++ /*
|
||||||
|
++ * If the user specified a built-in command line & we didn't already
|
||||||
|
++ * prepend it, we append it to boot_command_line here.
|
||||||
|
++ */
|
||||||
|
++ if (IS_ENABLED(CONFIG_CMDLINE_BOOL) &&
|
||||||
|
++ !IS_ENABLED(CONFIG_MIPS_CMDLINE_BUILTIN_EXTEND))
|
||||||
|
++ bootcmdline_append(builtin_cmdline, COMMAND_LINE_SIZE);
|
||||||
|
++}
|
||||||
|
+
|
||||||
|
+ static void __init arch_mem_init(char **cmdline_p)
|
||||||
|
+ {
|
||||||
|
+ struct memblock_region *reg;
|
||||||
|
+ extern void plat_mem_setup(void);
|
||||||
|
+
|
||||||
|
+- /*
|
||||||
|
+- * Initialize boot_command_line to an innocuous but non-empty string in
|
||||||
|
+- * order to prevent early_init_dt_scan_chosen() from copying
|
||||||
|
+- * CONFIG_CMDLINE into it without our knowledge. We handle
|
||||||
|
+- * CONFIG_CMDLINE ourselves below & don't want to duplicate its
|
||||||
|
+- * content because repeating arguments can be problematic.
|
||||||
|
+- */
|
||||||
|
+- strlcpy(boot_command_line, " ", COMMAND_LINE_SIZE);
|
||||||
|
+-
|
||||||
|
+ /* call board setup routine */
|
||||||
|
+ plat_mem_setup();
|
||||||
|
+
|
||||||
|
+@@ -861,35 +929,8 @@ static void __init arch_mem_init(char **cmdline_p)
|
||||||
|
+ pr_info("Determined physical RAM map:\n");
|
||||||
|
+ print_memory_map();
|
||||||
|
+
|
||||||
|
+-#if defined(CONFIG_CMDLINE_BOOL) && defined(CONFIG_CMDLINE_OVERRIDE)
|
||||||
|
+- strlcpy(boot_command_line, builtin_cmdline, COMMAND_LINE_SIZE);
|
||||||
|
+-#else
|
||||||
|
+- if ((USE_PROM_CMDLINE && arcs_cmdline[0]) ||
|
||||||
|
+- (USE_DTB_CMDLINE && !boot_command_line[0]))
|
||||||
|
+- strlcpy(boot_command_line, arcs_cmdline, COMMAND_LINE_SIZE);
|
||||||
|
+-
|
||||||
|
+- if (EXTEND_WITH_PROM && arcs_cmdline[0]) {
|
||||||
|
+- if (boot_command_line[0])
|
||||||
|
+- strlcat(boot_command_line, " ", COMMAND_LINE_SIZE);
|
||||||
|
+- strlcat(boot_command_line, arcs_cmdline, COMMAND_LINE_SIZE);
|
||||||
|
+- }
|
||||||
|
+-
|
||||||
|
+-#if defined(CONFIG_CMDLINE_BOOL)
|
||||||
|
+- if (builtin_cmdline[0]) {
|
||||||
|
+- if (boot_command_line[0])
|
||||||
|
+- strlcat(boot_command_line, " ", COMMAND_LINE_SIZE);
|
||||||
|
+- strlcat(boot_command_line, builtin_cmdline, COMMAND_LINE_SIZE);
|
||||||
|
+- }
|
||||||
|
+-
|
||||||
|
+- if (BUILTIN_EXTEND_WITH_PROM && arcs_cmdline[0]) {
|
||||||
|
+- if (boot_command_line[0])
|
||||||
|
+- strlcat(boot_command_line, " ", COMMAND_LINE_SIZE);
|
||||||
|
+- strlcat(boot_command_line, arcs_cmdline, COMMAND_LINE_SIZE);
|
||||||
|
+- }
|
||||||
|
+-#endif
|
||||||
|
+-#endif
|
||||||
|
++ bootcmdline_init(cmdline_p);
|
||||||
|
+ strlcpy(command_line, boot_command_line, COMMAND_LINE_SIZE);
|
||||||
|
+-
|
||||||
|
+ *cmdline_p = command_line;
|
||||||
|
+
|
||||||
|
+ parse_early_param();
|
||||||
@ -0,0 +1,408 @@
|
|||||||
|
From: Sven Eckelmann <sven@narfation.org>
|
||||||
|
Date: Mon, 23 Nov 2020 13:41:34 +0100
|
||||||
|
Subject: ath79: Add support for Plasma Cloud PA300
|
||||||
|
|
||||||
|
Device specifications:
|
||||||
|
|
||||||
|
* Qualcomm/Atheros QCA9533 v2
|
||||||
|
* 650/600/217 MHz (CPU/DDR/AHB)
|
||||||
|
* 64 MB of RAM
|
||||||
|
* 16 MB of SPI NOR flash (mx25l12805d)
|
||||||
|
- 2x 7 MB available; but one of the 7 MB regions is the recovery image
|
||||||
|
* 2x 10/100 Mbps Ethernet
|
||||||
|
* 2T2R 2.4 GHz Wi-Fi
|
||||||
|
* multi-color LED (controlled via red/green/blue GPIOs)
|
||||||
|
* 1x GPIO-button (reset)
|
||||||
|
* external h/w watchdog (enabled by default)
|
||||||
|
* TTL pins are on board (arrow points to VCC, then follows: GND, TX, RX)
|
||||||
|
* 2x fast ethernet
|
||||||
|
- eth0
|
||||||
|
+ Label: Ethernet 1
|
||||||
|
+ 24V passive POE (mode B)
|
||||||
|
+ used as WAN interface
|
||||||
|
- eth1
|
||||||
|
+ Label: Ethernet 2
|
||||||
|
+ 802.3af POE
|
||||||
|
+ builtin switch port 2
|
||||||
|
+ used as LAN interface
|
||||||
|
* 12-24V 1A DC
|
||||||
|
* internal antennas
|
||||||
|
|
||||||
|
Flashing instructions:
|
||||||
|
|
||||||
|
The tool ap51-flash (https://github.com/ap51-flash/ap51-flash) should be
|
||||||
|
used to transfer the factory image to the u-boot when the device boots up.
|
||||||
|
|
||||||
|
Signed-off-by: Sven Eckelmann <sven@narfation.org>
|
||||||
|
Origin: backport, https://github.com/openwrt/openwrt/commit/8028debedbedb2640cf5fac230bce82453e34a7e
|
||||||
|
|
||||||
|
diff --git a/package/boot/uboot-envtools/files/ath79 b/package/boot/uboot-envtools/files/ath79
|
||||||
|
index b5afbc9b444a921f6aef9ae81e5dc4f2ef7f9910..8808e81682f70583c4b2a888f8ddca9448277919 100644
|
||||||
|
--- a/package/boot/uboot-envtools/files/ath79
|
||||||
|
+++ b/package/boot/uboot-envtools/files/ath79
|
||||||
|
@@ -39,6 +39,9 @@ netgear,wndr3700|\
|
||||||
|
netgear,wndr3700-v2)
|
||||||
|
ubootenv_add_uci_config "/dev/mtd1" "0x0" "0x20000" "0x10000"
|
||||||
|
;;
|
||||||
|
+plasmacloud,pa300)
|
||||||
|
+ ubootenv_add_uci_config "/dev/mtd1" "0x0" "0x40000" "0x40000"
|
||||||
|
+ ;;
|
||||||
|
esac
|
||||||
|
|
||||||
|
config_load ubootenv
|
||||||
|
diff --git a/scripts/om-fwupgradecfg-gen.sh b/scripts/om-fwupgradecfg-gen.sh
|
||||||
|
index 4a7094055ff67aab83e796fc30f9913ae2c30fe2..e271fa0dacad837191eaab7683ad8880d183a75e 100755
|
||||||
|
--- a/scripts/om-fwupgradecfg-gen.sh
|
||||||
|
+++ b/scripts/om-fwupgradecfg-gen.sh
|
||||||
|
@@ -7,7 +7,7 @@
|
||||||
|
#
|
||||||
|
|
||||||
|
usage() {
|
||||||
|
- echo "Usage: $0 <OM2P|OM5P|OM5PAC|MR600|MR900|MR1750|A60|A42|A62> <out file path> <kernel path> <rootfs path>"
|
||||||
|
+ echo "Usage: $0 <OM2P|OM5P|OM5PAC|MR600|MR900|MR1750|A60|A42|A62|PA300> <out file path> <kernel path> <rootfs path>"
|
||||||
|
rm -f $CFG_OUT
|
||||||
|
exit 1
|
||||||
|
}
|
||||||
|
@@ -20,6 +20,7 @@ KERNEL_PATH=$3
|
||||||
|
ROOTFS_PATH=$4
|
||||||
|
|
||||||
|
case $CE_TYPE in
|
||||||
|
+ PA300|\
|
||||||
|
OM2P)
|
||||||
|
MAX_PART_SIZE=7168
|
||||||
|
KERNEL_FLASH_ADDR=0x1c0000
|
||||||
|
diff --git a/target/linux/ath79/base-files/etc/board.d/02_network b/target/linux/ath79/base-files/etc/board.d/02_network
|
||||||
|
index b8fac8816c9a2b2a87a5d1335b41127666afe2e4..846e2807ede8ec828a2f519f9b33c0d1dfdd5129 100755
|
||||||
|
--- a/target/linux/ath79/base-files/etc/board.d/02_network
|
||||||
|
+++ b/target/linux/ath79/base-files/etc/board.d/02_network
|
||||||
|
@@ -115,6 +115,7 @@ ath79_setup_interfaces()
|
||||||
|
;;
|
||||||
|
comfast,cf-e110n-v2|\
|
||||||
|
comfast,cf-e120a-v3|\
|
||||||
|
+ plasmacloud,pa300|\
|
||||||
|
tplink,cpe220-v3|\
|
||||||
|
ubnt,nanostation-m|\
|
||||||
|
ubnt,routerstation)
|
||||||
|
diff --git a/target/linux/ath79/base-files/lib/upgrade/dualboot_datachk.sh b/target/linux/ath79/base-files/lib/upgrade/dualboot_datachk.sh
|
||||||
|
new file mode 100644
|
||||||
|
index 0000000000000000000000000000000000000000..68733ccf154582e29b6416ad8daa7eb7a81bcc7e
|
||||||
|
--- /dev/null
|
||||||
|
+++ b/target/linux/ath79/base-files/lib/upgrade/dualboot_datachk.sh
|
||||||
|
@@ -0,0 +1,104 @@
|
||||||
|
+# The U-Boot loader with the datachk patchset for dualbooting requires image
|
||||||
|
+# sizes and checksums to be provided in the U-Boot environment.
|
||||||
|
+# The devices come with 2 main partitions - while one is active
|
||||||
|
+# sysupgrade will flash the other. The boot order is changed to boot the
|
||||||
|
+# newly flashed partition. If the new partition can't be booted due to
|
||||||
|
+# upgrade failures the previously used partition is loaded.
|
||||||
|
+
|
||||||
|
+platform_do_upgrade_dualboot_datachk() {
|
||||||
|
+ local tar_file="$1"
|
||||||
|
+ local restore_backup
|
||||||
|
+ local primary_kernel_mtd
|
||||||
|
+
|
||||||
|
+ local setenv_script="/tmp/fw_env_upgrade"
|
||||||
|
+
|
||||||
|
+ local inactive_mtd="$(find_mtd_index $PART_NAME)"
|
||||||
|
+ local inactive_offset="$(cat /sys/class/mtd/mtd${inactive_mtd}/offset)"
|
||||||
|
+ local total_size="$(cat /sys/class/mtd/mtd${inactive_mtd}/size)"
|
||||||
|
+ local flash_start_mem=0x9f000000
|
||||||
|
+
|
||||||
|
+ # detect to which flash region the new image is written to.
|
||||||
|
+ #
|
||||||
|
+ # 1. check what is the mtd index for the first flash region on this
|
||||||
|
+ # device
|
||||||
|
+ # 2. check if the target partition ("inactive") has the mtd index of
|
||||||
|
+ # the first flash region
|
||||||
|
+ #
|
||||||
|
+ # - when it is: the new bootseq will be 1,2 and the first region is
|
||||||
|
+ # modified
|
||||||
|
+ # - when it isnt: bootseq will be 2,1 and the second region is
|
||||||
|
+ # modified
|
||||||
|
+ #
|
||||||
|
+ # The detection has to be done via the hardcoded mtd partition because
|
||||||
|
+ # the current boot might be done with the fallback region. Let us
|
||||||
|
+ # assume that the current bootseq is 1,2. The bootloader detected that
|
||||||
|
+ # the image in flash region 1 is corrupt and thus switches to flash
|
||||||
|
+ # region 2. The bootseq in the u-boot-env is now still the same and
|
||||||
|
+ # the sysupgrade code can now only rely on the actual mtd indexes and
|
||||||
|
+ # not the bootseq variable to detect the currently booted flash
|
||||||
|
+ # region/image.
|
||||||
|
+ #
|
||||||
|
+ # In the above example, an implementation which uses bootseq ("1,2") to
|
||||||
|
+ # detect the currently booted image would assume that region 1 is booted
|
||||||
|
+ # and then overwrite the variables for the wrong flash region (aka the
|
||||||
|
+ # one which isn't modified). This could result in a device which doesn't
|
||||||
|
+ # boot anymore to Linux until it was reflashed with ap51-flash.
|
||||||
|
+ local next_boot_part="1"
|
||||||
|
+ case "$(board_name)" in
|
||||||
|
+ plasmacloud,pa300)
|
||||||
|
+ primary_kernel_mtd=3
|
||||||
|
+ ;;
|
||||||
|
+ *)
|
||||||
|
+ echo "failed to detect primary kernel mtd partition for board"
|
||||||
|
+ return 1
|
||||||
|
+ ;;
|
||||||
|
+ esac
|
||||||
|
+ [ "$inactive_mtd" = "$primary_kernel_mtd" ] || next_boot_part="2"
|
||||||
|
+
|
||||||
|
+ local board_dir=$(tar tf $tar_file | grep -m 1 '^sysupgrade-.*/$')
|
||||||
|
+ board_dir=${board_dir%/}
|
||||||
|
+
|
||||||
|
+ local kernel_length=$(tar xf $tar_file ${board_dir}/kernel -O | wc -c)
|
||||||
|
+ local rootfs_length=$(tar xf $tar_file ${board_dir}/root -O | wc -c)
|
||||||
|
+ # rootfs without EOF marker
|
||||||
|
+ rootfs_length=$((rootfs_length-4))
|
||||||
|
+
|
||||||
|
+ local kernel_md5=$(tar xf $tar_file ${board_dir}/kernel -O | md5sum); kernel_md5="${kernel_md5%% *}"
|
||||||
|
+ # md5 checksum of rootfs with EOF marker
|
||||||
|
+ local rootfs_md5=$(tar xf $tar_file ${board_dir}/root -O | dd bs=1 count=$rootfs_length | md5sum); rootfs_md5="${rootfs_md5%% *}"
|
||||||
|
+
|
||||||
|
+ #
|
||||||
|
+ # add tar support to get_image() to use default_do_upgrade() instead?
|
||||||
|
+ #
|
||||||
|
+
|
||||||
|
+ # take care of restoring a saved config
|
||||||
|
+ [ -n "$UPGRADE_BACKUP" ] && restore_backup="${MTD_CONFIG_ARGS} -j ${UPGRADE_BACKUP}"
|
||||||
|
+
|
||||||
|
+ mtd -q erase inactive
|
||||||
|
+ tar xf $tar_file ${board_dir}/root -O | mtd -n -p $kernel_length $restore_backup write - $PART_NAME
|
||||||
|
+ tar xf $tar_file ${board_dir}/kernel -O | mtd -n write - $PART_NAME
|
||||||
|
+
|
||||||
|
+ # prepare new u-boot env
|
||||||
|
+ if [ "$next_boot_part" = "1" ]; then
|
||||||
|
+ echo "bootseq 1,2" > $setenv_script
|
||||||
|
+ else
|
||||||
|
+ echo "bootseq 2,1" > $setenv_script
|
||||||
|
+ fi
|
||||||
|
+
|
||||||
|
+ printf "kernel_size_%i %i\n" $next_boot_part $((kernel_length / 1024)) >> $setenv_script
|
||||||
|
+ printf "vmlinux_start_addr 0x%08x\n" $((flash_start_mem + inactive_offset)) >> $setenv_script
|
||||||
|
+ printf "vmlinux_size 0x%08x\n" ${kernel_length} >> $setenv_script
|
||||||
|
+ printf "vmlinux_checksum %s\n" ${kernel_md5} >> $setenv_script
|
||||||
|
+
|
||||||
|
+ printf "rootfs_size_%i %i\n" $next_boot_part $(((total_size-kernel_length) / 1024)) >> $setenv_script
|
||||||
|
+ printf "rootfs_start_addr 0x%08x\n" $((flash_start_mem+inactive_offset+kernel_length)) >> $setenv_script
|
||||||
|
+ printf "rootfs_size 0x%08x\n" ${rootfs_length} >> $setenv_script
|
||||||
|
+ printf "rootfs_checksum %s\n" ${rootfs_md5} >> $setenv_script
|
||||||
|
+
|
||||||
|
+ # store u-boot env changes
|
||||||
|
+ mkdir -p /var/lock
|
||||||
|
+ fw_setenv -s $setenv_script || {
|
||||||
|
+ echo "failed to update U-Boot environment"
|
||||||
|
+ return 1
|
||||||
|
+ }
|
||||||
|
+}
|
||||||
|
diff --git a/target/linux/ath79/base-files/lib/upgrade/platform.sh b/target/linux/ath79/base-files/lib/upgrade/platform.sh
|
||||||
|
index f3e19a5694f1f9c6132a42d0740873e522d0b8e3..c4f869932a02ef353e694b50496c3b2ed5d59f12 100644
|
||||||
|
--- a/target/linux/ath79/base-files/lib/upgrade/platform.sh
|
||||||
|
+++ b/target/linux/ath79/base-files/lib/upgrade/platform.sh
|
||||||
|
@@ -5,6 +5,9 @@
|
||||||
|
PART_NAME=firmware
|
||||||
|
REQUIRE_IMAGE_METADATA=1
|
||||||
|
|
||||||
|
+RAMFS_COPY_BIN='fw_printenv fw_setenv'
|
||||||
|
+RAMFS_COPY_DATA='/etc/fw_env.config /var/lock/fw_printenv.lock'
|
||||||
|
+
|
||||||
|
redboot_fis_do_upgrade() {
|
||||||
|
local append
|
||||||
|
local sysup_file="$1"
|
||||||
|
@@ -43,6 +46,10 @@ platform_do_upgrade() {
|
||||||
|
jjplus,ja76pf2)
|
||||||
|
redboot_fis_do_upgrade "$1" linux
|
||||||
|
;;
|
||||||
|
+ plasmacloud,pa300)
|
||||||
|
+ PART_NAME="inactive"
|
||||||
|
+ platform_do_upgrade_dualboot_datachk "$1"
|
||||||
|
+ ;;
|
||||||
|
ubnt,routerstation|\
|
||||||
|
ubnt,routerstation-pro)
|
||||||
|
redboot_fis_do_upgrade "$1" kernel
|
||||||
|
diff --git a/target/linux/ath79/dts/qca9533_plasmacloud_pa300.dts b/target/linux/ath79/dts/qca9533_plasmacloud_pa300.dts
|
||||||
|
new file mode 100644
|
||||||
|
index 0000000000000000000000000000000000000000..8de89292eaa2e655066342ebfac05dbeb6a3c4f3
|
||||||
|
--- /dev/null
|
||||||
|
+++ b/target/linux/ath79/dts/qca9533_plasmacloud_pa300.dts
|
||||||
|
@@ -0,0 +1,8 @@
|
||||||
|
+// SPDX-License-Identifier: GPL-2.0-or-later OR MIT
|
||||||
|
+
|
||||||
|
+#include "qca9533_plasmacloud_pa300.dtsi"
|
||||||
|
+
|
||||||
|
+/ {
|
||||||
|
+ compatible = "plasmacloud,pa300", "qca,qca9533";
|
||||||
|
+ model = "Plasma Cloud PA300";
|
||||||
|
+};
|
||||||
|
diff --git a/target/linux/ath79/dts/qca9533_plasmacloud_pa300.dtsi b/target/linux/ath79/dts/qca9533_plasmacloud_pa300.dtsi
|
||||||
|
new file mode 100644
|
||||||
|
index 0000000000000000000000000000000000000000..d8fc78dc1edeb2d8677336f25fcae2a85e05ee3f
|
||||||
|
--- /dev/null
|
||||||
|
+++ b/target/linux/ath79/dts/qca9533_plasmacloud_pa300.dtsi
|
||||||
|
@@ -0,0 +1,140 @@
|
||||||
|
+// SPDX-License-Identifier: GPL-2.0-or-later OR MIT
|
||||||
|
+/dts-v1/;
|
||||||
|
+#include "qca953x.dtsi"
|
||||||
|
+
|
||||||
|
+#include <dt-bindings/gpio/gpio.h>
|
||||||
|
+#include <dt-bindings/input/input.h>
|
||||||
|
+
|
||||||
|
+/ {
|
||||||
|
+ chosen {
|
||||||
|
+ /delete-property/ bootargs;
|
||||||
|
+ };
|
||||||
|
+
|
||||||
|
+ aliases {
|
||||||
|
+ led-boot = &led_status_green;
|
||||||
|
+ led-failsafe = &led_status_green;
|
||||||
|
+ led-running = &led_status_green;
|
||||||
|
+ led-upgrade = &led_status_green;
|
||||||
|
+ label-mac-device = ð0;
|
||||||
|
+ };
|
||||||
|
+
|
||||||
|
+ keys {
|
||||||
|
+ compatible = "gpio-keys";
|
||||||
|
+
|
||||||
|
+ pinctrl-names = "default";
|
||||||
|
+
|
||||||
|
+ reset {
|
||||||
|
+ label = "reset";
|
||||||
|
+ linux,code = <KEY_RESTART>;
|
||||||
|
+ gpios = <&gpio 1 GPIO_ACTIVE_LOW>;
|
||||||
|
+ };
|
||||||
|
+ };
|
||||||
|
+
|
||||||
|
+ leds {
|
||||||
|
+ compatible = "gpio-leds";
|
||||||
|
+
|
||||||
|
+ status_red {
|
||||||
|
+ label = "red:status";
|
||||||
|
+ gpios = <&gpio 0 GPIO_ACTIVE_HIGH>;
|
||||||
|
+ };
|
||||||
|
+
|
||||||
|
+ led_status_green: status_green {
|
||||||
|
+ label = "green:status";
|
||||||
|
+ gpios = <&gpio 2 GPIO_ACTIVE_HIGH>;
|
||||||
|
+ };
|
||||||
|
+
|
||||||
|
+ status_blue {
|
||||||
|
+ label = "blue:status";
|
||||||
|
+ gpios = <&gpio 3 GPIO_ACTIVE_HIGH>;
|
||||||
|
+ };
|
||||||
|
+ };
|
||||||
|
+
|
||||||
|
+ watchdog {
|
||||||
|
+ compatible = "linux,wdt-gpio";
|
||||||
|
+ gpios = <&gpio 12 GPIO_ACTIVE_LOW>;
|
||||||
|
+ hw_algo = "toggle";
|
||||||
|
+ /* hw_margin_ms is actually 300s but driver limits it to 60s */
|
||||||
|
+ hw_margin_ms = <60000>;
|
||||||
|
+ always-running;
|
||||||
|
+ };
|
||||||
|
+};
|
||||||
|
+
|
||||||
|
+&uart {
|
||||||
|
+ status = "okay";
|
||||||
|
+};
|
||||||
|
+
|
||||||
|
+&spi {
|
||||||
|
+ status = "okay";
|
||||||
|
+
|
||||||
|
+ flash@0 {
|
||||||
|
+ compatible = "jedec,spi-nor";
|
||||||
|
+ reg = <0>;
|
||||||
|
+ spi-max-frequency = <25000000>;
|
||||||
|
+
|
||||||
|
+ /* partitions are passed via bootloader */
|
||||||
|
+ partitions {
|
||||||
|
+ compatible = "fixed-partitions";
|
||||||
|
+ #address-cells = <1>;
|
||||||
|
+ #size-cells = <1>;
|
||||||
|
+
|
||||||
|
+ partition@0 {
|
||||||
|
+ label = "u-boot";
|
||||||
|
+ reg = <0x000000 0x040000>;
|
||||||
|
+ read-only;
|
||||||
|
+ };
|
||||||
|
+
|
||||||
|
+ partition@40000 {
|
||||||
|
+ label = "u-boot-env";
|
||||||
|
+ reg = <0x040000 0x040000>;
|
||||||
|
+ };
|
||||||
|
+
|
||||||
|
+ partition@80000 {
|
||||||
|
+ label = "custom";
|
||||||
|
+ reg = <0x080000 0x140000>;
|
||||||
|
+ read-only;
|
||||||
|
+ };
|
||||||
|
+
|
||||||
|
+ partition@1c0000 {
|
||||||
|
+ label = "inactive";
|
||||||
|
+ reg = <0x1c0000 0x700000>;
|
||||||
|
+ };
|
||||||
|
+
|
||||||
|
+ partition@8c0000 {
|
||||||
|
+ label = "inactive2";
|
||||||
|
+ reg = <0x8c0000 0x700000>;
|
||||||
|
+ };
|
||||||
|
+
|
||||||
|
+ art: partition@fc0000 {
|
||||||
|
+ label = "ART";
|
||||||
|
+ reg = <0xfc0000 0x040000>;
|
||||||
|
+ read-only;
|
||||||
|
+ };
|
||||||
|
+ };
|
||||||
|
+ };
|
||||||
|
+};
|
||||||
|
+
|
||||||
|
+ð0 {
|
||||||
|
+ status = "okay";
|
||||||
|
+
|
||||||
|
+ phy-handle = <&swphy4>;
|
||||||
|
+
|
||||||
|
+ mtd-mac-address = <&art 0x0>;
|
||||||
|
+};
|
||||||
|
+
|
||||||
|
+ð1 {
|
||||||
|
+ /* Workaround: keep the Ethernet interfaces order/mapping correct
|
||||||
|
+ * (GMAC0 -> eth0, GMAC1 -> eth1, same as in old ar71xx target)
|
||||||
|
+ */
|
||||||
|
+ compatible = "qca,qca9530-eth", "syscon", "simple-mfd";
|
||||||
|
+
|
||||||
|
+ mtd-mac-address = <&art 0x0>;
|
||||||
|
+ mtd-mac-address-increment = <1>;
|
||||||
|
+};
|
||||||
|
+
|
||||||
|
+&wmac {
|
||||||
|
+ status = "okay";
|
||||||
|
+
|
||||||
|
+ mtd-cal-data = <&art 0x1000>;
|
||||||
|
+ mtd-mac-address = <&art 0x0>;
|
||||||
|
+ mtd-mac-address-increment = <2>;
|
||||||
|
+};
|
||||||
|
diff --git a/target/linux/ath79/image/generic.mk b/target/linux/ath79/image/generic.mk
|
||||||
|
index 892ef10f870e347c8a1509cecd35bce4b5e98bee..3c1db9b3204d6784580f87ea9adb7a2ba98d285b 100644
|
||||||
|
--- a/target/linux/ath79/image/generic.mk
|
||||||
|
+++ b/target/linux/ath79/image/generic.mk
|
||||||
|
@@ -646,6 +646,23 @@ define Device/pisen_wmm003n
|
||||||
|
endef
|
||||||
|
TARGET_DEVICES += pisen_wmm003n
|
||||||
|
|
||||||
|
+define Device/plasmacloud_pa300-common
|
||||||
|
+ ATH_SOC := qca9533
|
||||||
|
+ DEVICE_PACKAGES := uboot-envtools
|
||||||
|
+ IMAGE_SIZE := 7168k
|
||||||
|
+ BLOCKSIZE := 64k
|
||||||
|
+ IMAGES += factory.bin
|
||||||
|
+ KERNEL := kernel-bin | append-dtb | lzma | uImage lzma | pad-to $$(BLOCKSIZE)
|
||||||
|
+ IMAGE/factory.bin := append-rootfs | pad-rootfs | openmesh-image ce_type=PA300
|
||||||
|
+ IMAGE/sysupgrade.bin := append-rootfs | pad-rootfs | sysupgrade-tar rootfs=$$$$@ | append-metadata
|
||||||
|
+endef
|
||||||
|
+
|
||||||
|
+define Device/plasmacloud_pa300
|
||||||
|
+ $(Device/plasmacloud_pa300-common)
|
||||||
|
+ DEVICE_TITLE := Plasma Cloud PA300
|
||||||
|
+endef
|
||||||
|
+TARGET_DEVICES += plasmacloud_pa300
|
||||||
|
+
|
||||||
|
define Device/netgear_wndr3800
|
||||||
|
$(Device/netgear_wndr3x00)
|
||||||
|
DEVICE_TITLE := NETGEAR WNDR3800
|
||||||
@ -0,0 +1,123 @@
|
|||||||
|
From: Sven Eckelmann <sven@narfation.org>
|
||||||
|
Date: Mon, 23 Nov 2020 13:41:34 +0100
|
||||||
|
Subject: ath79: Add support for Plasma Cloud PA300E
|
||||||
|
|
||||||
|
Device specifications:
|
||||||
|
|
||||||
|
* Qualcomm/Atheros QCA9533 v2
|
||||||
|
* 650/600/217 MHz (CPU/DDR/AHB)
|
||||||
|
* 64 MB of RAM
|
||||||
|
* 16 MB of SPI NOR flash (mx25l12805d)
|
||||||
|
- 2x 7 MB available; but one of the 7 MB regions is the recovery image
|
||||||
|
* 2x 10/100 Mbps Ethernet
|
||||||
|
* 2T2R 2.4 GHz Wi-Fi
|
||||||
|
* multi-color LED (controlled via red/green/blue GPIOs)
|
||||||
|
* 1x GPIO-button (reset)
|
||||||
|
* external h/w watchdog (enabled by default)
|
||||||
|
* TTL pins are on board (arrow points to VCC, then follows: GND, TX, RX)
|
||||||
|
* 2x fast ethernet
|
||||||
|
- eth0
|
||||||
|
+ Label: Ethernet 1
|
||||||
|
+ 24V passive POE (mode B)
|
||||||
|
+ used as WAN interface
|
||||||
|
- eth1
|
||||||
|
+ Label: Ethernet 2
|
||||||
|
+ 802.3af POE
|
||||||
|
+ builtin switch port 2
|
||||||
|
+ used as LAN interface
|
||||||
|
* 12-24V 1A DC
|
||||||
|
* external antennas
|
||||||
|
|
||||||
|
Flashing instructions:
|
||||||
|
|
||||||
|
The tool ap51-flash (https://github.com/ap51-flash/ap51-flash) should be
|
||||||
|
used to transfer the factory image to the u-boot when the device boots up.
|
||||||
|
|
||||||
|
Signed-off-by: Sven Eckelmann <sven@narfation.org>
|
||||||
|
Origin: backport, https://github.com/openwrt/openwrt/commit/ba6a387b9700bc1d486f2a73fbd4b88cfb5758f1
|
||||||
|
|
||||||
|
diff --git a/package/boot/uboot-envtools/files/ath79 b/package/boot/uboot-envtools/files/ath79
|
||||||
|
index 8808e81682f70583c4b2a888f8ddca9448277919..a5df255009919d62d580faa9baf2ef4fe45d36ec 100644
|
||||||
|
--- a/package/boot/uboot-envtools/files/ath79
|
||||||
|
+++ b/package/boot/uboot-envtools/files/ath79
|
||||||
|
@@ -39,7 +39,8 @@ netgear,wndr3700|\
|
||||||
|
netgear,wndr3700-v2)
|
||||||
|
ubootenv_add_uci_config "/dev/mtd1" "0x0" "0x20000" "0x10000"
|
||||||
|
;;
|
||||||
|
-plasmacloud,pa300)
|
||||||
|
+plasmacloud,pa300|\
|
||||||
|
+plasmacloud,pa300e)
|
||||||
|
ubootenv_add_uci_config "/dev/mtd1" "0x0" "0x40000" "0x40000"
|
||||||
|
;;
|
||||||
|
esac
|
||||||
|
diff --git a/target/linux/ath79/base-files/etc/board.d/02_network b/target/linux/ath79/base-files/etc/board.d/02_network
|
||||||
|
index 846e2807ede8ec828a2f519f9b33c0d1dfdd5129..57429fbc1c851b6d8a8a03096d7043f78a489549 100755
|
||||||
|
--- a/target/linux/ath79/base-files/etc/board.d/02_network
|
||||||
|
+++ b/target/linux/ath79/base-files/etc/board.d/02_network
|
||||||
|
@@ -116,6 +116,7 @@ ath79_setup_interfaces()
|
||||||
|
comfast,cf-e110n-v2|\
|
||||||
|
comfast,cf-e120a-v3|\
|
||||||
|
plasmacloud,pa300|\
|
||||||
|
+ plasmacloud,pa300e|\
|
||||||
|
tplink,cpe220-v3|\
|
||||||
|
ubnt,nanostation-m|\
|
||||||
|
ubnt,routerstation)
|
||||||
|
diff --git a/target/linux/ath79/base-files/lib/upgrade/dualboot_datachk.sh b/target/linux/ath79/base-files/lib/upgrade/dualboot_datachk.sh
|
||||||
|
index 68733ccf154582e29b6416ad8daa7eb7a81bcc7e..002f5f9668978292615b19c3ba14b17afac709e2 100644
|
||||||
|
--- a/target/linux/ath79/base-files/lib/upgrade/dualboot_datachk.sh
|
||||||
|
+++ b/target/linux/ath79/base-files/lib/upgrade/dualboot_datachk.sh
|
||||||
|
@@ -45,7 +45,8 @@ platform_do_upgrade_dualboot_datachk() {
|
||||||
|
# boot anymore to Linux until it was reflashed with ap51-flash.
|
||||||
|
local next_boot_part="1"
|
||||||
|
case "$(board_name)" in
|
||||||
|
- plasmacloud,pa300)
|
||||||
|
+ plasmacloud,pa300|\
|
||||||
|
+ plasmacloud,pa300e)
|
||||||
|
primary_kernel_mtd=3
|
||||||
|
;;
|
||||||
|
*)
|
||||||
|
diff --git a/target/linux/ath79/base-files/lib/upgrade/platform.sh b/target/linux/ath79/base-files/lib/upgrade/platform.sh
|
||||||
|
index c4f869932a02ef353e694b50496c3b2ed5d59f12..f1bbc24036d4f371c941f9736bc736be4903dec7 100644
|
||||||
|
--- a/target/linux/ath79/base-files/lib/upgrade/platform.sh
|
||||||
|
+++ b/target/linux/ath79/base-files/lib/upgrade/platform.sh
|
||||||
|
@@ -46,7 +46,8 @@ platform_do_upgrade() {
|
||||||
|
jjplus,ja76pf2)
|
||||||
|
redboot_fis_do_upgrade "$1" linux
|
||||||
|
;;
|
||||||
|
- plasmacloud,pa300)
|
||||||
|
+ plasmacloud,pa300|\
|
||||||
|
+ plasmacloud,pa300e)
|
||||||
|
PART_NAME="inactive"
|
||||||
|
platform_do_upgrade_dualboot_datachk "$1"
|
||||||
|
;;
|
||||||
|
diff --git a/target/linux/ath79/dts/qca9533_plasmacloud_pa300e.dts b/target/linux/ath79/dts/qca9533_plasmacloud_pa300e.dts
|
||||||
|
new file mode 100644
|
||||||
|
index 0000000000000000000000000000000000000000..1527a796bb63b7c33b60caaeb97438936daf727e
|
||||||
|
--- /dev/null
|
||||||
|
+++ b/target/linux/ath79/dts/qca9533_plasmacloud_pa300e.dts
|
||||||
|
@@ -0,0 +1,8 @@
|
||||||
|
+// SPDX-License-Identifier: GPL-2.0-or-later OR MIT
|
||||||
|
+
|
||||||
|
+#include "qca9533_plasmacloud_pa300.dtsi"
|
||||||
|
+
|
||||||
|
+/ {
|
||||||
|
+ compatible = "plasmacloud,pa300e", "qca,qca9533";
|
||||||
|
+ model = "Plasma Cloud PA300E";
|
||||||
|
+};
|
||||||
|
diff --git a/target/linux/ath79/image/generic.mk b/target/linux/ath79/image/generic.mk
|
||||||
|
index 3c1db9b3204d6784580f87ea9adb7a2ba98d285b..7159f9c6d2dabf0a80b4a107790471da32af97bc 100644
|
||||||
|
--- a/target/linux/ath79/image/generic.mk
|
||||||
|
+++ b/target/linux/ath79/image/generic.mk
|
||||||
|
@@ -663,6 +663,12 @@ define Device/plasmacloud_pa300
|
||||||
|
endef
|
||||||
|
TARGET_DEVICES += plasmacloud_pa300
|
||||||
|
|
||||||
|
+define Device/plasmacloud_pa300e
|
||||||
|
+ $(Device/plasmacloud_pa300-common)
|
||||||
|
+ DEVICE_TITLE := Plasma Cloud PA300E
|
||||||
|
+endef
|
||||||
|
+TARGET_DEVICES += plasmacloud_pa300e
|
||||||
|
+
|
||||||
|
define Device/netgear_wndr3800
|
||||||
|
$(Device/netgear_wndr3x00)
|
||||||
|
DEVICE_TITLE := NETGEAR WNDR3800
|
||||||
@ -71,6 +71,12 @@ device('ocedo-raccoon', 'ocedo_raccoon', {
|
|||||||
factory = false,
|
factory = false,
|
||||||
})
|
})
|
||||||
|
|
||||||
|
-- Plasma Cloud
|
||||||
|
|
||||||
|
device('plasma-cloud-pa300', 'plasmacloud_pa300')
|
||||||
|
|
||||||
|
device('plasma-cloud-pa300e', 'plasmacloud_pa300e')
|
||||||
|
|
||||||
-- TP-Link
|
-- TP-Link
|
||||||
|
|
||||||
device('tp-link-archer-c2-v3', 'tplink_archer-c2-v3', {
|
device('tp-link-archer-c2-v3', 'tplink_archer-c2-v3', {
|
||||||
|
|||||||
Loading…
Reference in New Issue
Block a user