From e0abce03e69403b343c1f1e6e62743fda0a50003 Mon Sep 17 00:00:00 2001 From: Sven Eckelmann Date: Sun, 10 Oct 2021 17:27:40 +0200 Subject: [PATCH] ath79-generic: Add support for OpenMesh OM5P Device specifications: ====================== * Qualcomm/Atheros AR9344 rev 2 * 560/450/225 MHz (CPU/DDR/AHB) * 64 MB of RAM * 16 MB of SPI NOR flash - 2x 7 MB available; but one of the 7 MB regions is the recovery image * 2x 10/100 Mbps Ethernet * 2T2R 5 GHz Wi-Fi * 6x GPIO-LEDs (3x wifi, 2x ethernet, 1x power) * 1x GPIO-button (reset) * external h/w watchdog (enabled by default) * TTL pins are on board (arrow points to VCC, then follows: GND, TX, RX) * 2x fast ethernet - eth0 + builtin switch port 1 + used as LAN interface - eth1 + 18-24V passive POE (mode B) + used as WAN interface * 12-24V 1A DC * internal antennas WAN/LAN LEDs appear to be wrong in ar71xx and have been swapped here. Flashing instructions: ====================== Various methods can be used to install the actual image on the flash. Two easy ones are: ap51-flash ---------- The tool ap51-flash (https://github.com/ap51-flash/ap51-flash) should be used to transfer the image to the u-boot when the device boots up. initramfs from TFTP ------------------- The serial console must be used to access the u-boot shell during bootup. It can then be used to first boot up the initramfs image from a TFTP server (here with the IP 192.168.1.21): setenv serverip 192.168.1.21 setenv ipaddr 192.168.1.1 tftpboot 0c00000 .bin && bootm $fileaddr The actual sysupgrade image can then be transferred (on the LAN port) to the device via scp .bin root@192.168.1.1:/tmp/ On the device, the sysupgrade must then be started using sysupgrade -n /tmp/.bin --- docs/user/supported_devices.rst | 1 + targets/ath79-generic | 4 ++++ 2 files changed, 5 insertions(+) diff --git a/docs/user/supported_devices.rst b/docs/user/supported_devices.rst index 57ed445e..f9cf9691 100644 --- a/docs/user/supported_devices.rst +++ b/docs/user/supported_devices.rst @@ -43,6 +43,7 @@ ath79-generic - OM2P (v1, v2, v4) - OM2P-HS (v1, v2, v3, v4) - OM2P-LC + - OM5P * Plasma Cloud diff --git a/targets/ath79-generic b/targets/ath79-generic index 9b8ceb5b..63f0d53e 100644 --- a/targets/ath79-generic +++ b/targets/ath79-generic @@ -189,6 +189,10 @@ device('openmesh-om2p-lc', 'openmesh_om2p-lc', { factory = false, }) +device('openmesh-om5p', 'openmesh_om5p', { + factory = false, +}) + -- Plasma Cloud