nils/gluon
1
0
Fork 0
Code Issues Pull Requests Packages Projects Releases Wiki Activity
3,044 Commits 26 Branches 63 Tags 18 MiB
0c22f3c629
Commit Graph

547 Commits

Author SHA1 Message Date
Martin Weinelt
0c22f3c629 docs: treat sphinx warnings as errors 2019-06-20 13:38:09 +02:00
Matthias Schiffer
912490c026
Add GLUON_DEPRECATED flag 
This new build flag is mandatory for now (it may default to 0 in a future
Gluon version). It may be set to the following values:

* 0 - Do not build any images for deprecated devices.
* upgrade - Only build sysupgrade images for deprecated devices.
* full - Build both sysupgrade and factory images for deprecated devices.

"Other" images are handled like factory images, as they are also used for
the initial installation of Gluon on a device.
 2019-06-15 23:34:07 +02:00
Matthias Schiffer
a44a5dce02
ar71xx: Onion Omega is BROKEN 
This device doesn't have an Ethernet port, and even with the Ethernet
shield, eth0 is not configured.
 2019-06-15 23:30:23 +02:00
Martin Weinelt
e20d5b0a3e gluon-core: allow presetting the outdoor mode for new installations 2019-04-28 18:19:43 +02:00
Martin Weinelt
bf55249159 gluon-core: add outdoor support for 5 ghz radios 
Add the `wifi5.outdoor_chanlist` site configuration that
allows specifying an outdoor channel range that can be
switched to for regulatory compliance.

Upon enabling the outdoor option the device will
 - configure the `outdoor_chanlist` on all 5 GHz radios
 - which may enable DFS/TPC, based on the regulatory domain
 - disable ibss/mesh on the 5 GHz radio, as DFS *will*
   break mesh connections
 - allow for htmode reconfiguration on 5 GHz radios

The outdoor option can be toggled from
 - Advanced Settings
   - W-LAN
     - Outdoor Installation

The `preserve_channel` flag overrules the outdoor channel
selection.
 2019-04-28 18:17:11 +02:00
Martin Weinelt
4f60f6dbc6 gluon-core: disable legacy_rates by default, drop support for supported and basic rates (#1716) 2019-04-28 16:47:29 +02:00
bobcanthelpyou
aeebcf272c docs: add GLUON_DEBUG 2019-04-21 16:05:57 +02:00
bobcanthelpyou
2ce07ae2fe ar71xx: add support for TP-Link TL-WR840N v2 (#1697) 2019-04-12 01:32:11 +02:00
bobcanthelpyou
2c4f022994 build: rename DEVICES to GLUON_DEVICES (#1686) 2019-04-12 01:05:04 +02:00
bobcanthelpyou
078184a59c docs: add notice for opkg repo change (#1693) 2019-04-11 08:54:52 +02:00
Vincent Wiemann
deb020d3ef docs: faq: add note for supported hardware (#1665) 
A table with hardware supported by Gluon can be found on the OpenWrt Wiki. This commit adds a corresponding FAQ entry.
 2019-04-09 00:10:34 +02:00
bobcanthelpyou
ff7aeafad2 docs: fix typos and small text improvements 2019-04-02 02:32:50 +02:00
bobcanthelpyou
dca5abaa26 docs: rename target sunxi to sunxi-cortexa7 
renamed by 210d97c53e
 2019-03-26 00:34:34 +01:00
bobcanthelpyou
7d314821a8 docs: remove target ipq806x 
was marked as broken by #1526 cause of #1505
 2019-03-26 00:34:34 +01:00
bobcanthelpyou
cae79eb074 docs: add new <%| tag for escaped expressions (#1683) 
the tag was added by dd23a805c2
 2019-03-23 18:37:49 +01:00
Manu.WTF
917d6af299 ar71xx: add support for D-Link DAP-1330 (#1672) 2019-03-15 23:35:35 +01:00
Martin Weinelt
fe9892d96a
docs: add v2018.2.1 release notes 2019-03-15 22:53:01 +01:00
bobcanthelpyou
170c494f40 docs: fix typos and common misspellings (#1668) 2019-03-10 20:15:25 +01:00
bobcanthelpyou
e8b37b2d7c docs: remove unavailable devices (#1667) 
- A Picostation M5 never existed
- TL-WR710N v1 and v2.1 are part of ar71xx-generic not ar71xx-tiny
 2019-03-10 02:52:34 +01:00
bobcanthelpyou
8549438063 docs: update links (moved permanently) 2019-02-16 19:25:49 +01:00
Martin Weinelt
b8ff310631
docs: link gluon-scheduled-domain-switch in nav 2019-02-16 16:50:30 +01:00
David Bauer
5b97b07f6a ramips-mt76x8: add support for Netgear R6120 (#1650) 2019-02-16 14:41:48 +01:00
David Bauer
c1b9ea2d9c gluon-scheduled-domain-switch: add package (#1555) 
This package allows to automatically switch to another domain, either
at a given point in time or after the node was offline long enough.
 2019-02-12 11:00:29 +01:00
Martin Weinelt
131548580e Revert "docs: multidomain: add missing uci commit in gluon-reconfigure example" 
This reverts commit b92e404437.

Committing in this case is unnecessary as that job is already handled by 998-commit
which is in a superior position to commit, as it is run after all relevant changes to
the configuration have been made.
 2019-02-11 23:53:55 +01:00
Julian Labus
b92e404437 docs: multidomain: add missing uci commit in gluon-reconfigure example 2019-02-11 16:06:23 +01:00
David Bauer
1ace3d5bb0 ramips-mt76x8: add support for TP-Link Archer C50 v4 (#1641) 
This backports the TP-Link Archer C50 v4.

We are dropping the following upstream commits. They add support for the
TP-Link recovery-flag which enabled the web-recovery. As they are not
needed for the router to work, we drop them for now.

28cd2ca base-files: sysupgrade: support additional mtd options
1e06482 mtd: add logic for TP-Link ramips recovery magic
 2019-02-08 02:48:09 +01:00
Martin Weinelt
9f7276cdd6 docs: improve references to the IRC chatroom (#1643) 2019-02-07 01:53:18 +01:00
Matthias Schiffer
2cbb2808a0
docs: don't highlight code blocks unless requested explicitly 2019-02-03 22:48:01 +01:00
Matthias Schiffer
f33d729253
docs: use sphinx_rtd_theme for HTML output 
It makes sense to render using the same theme locally that is used on RTD.
The theme can be installed using:

    pip install sphinx_rtd_theme
 2019-02-03 22:45:47 +01:00
Matthias Schiffer
cd355bbbfb
docs: update Makefile and config to Sphinx 1.8.4 defaults 2019-02-03 22:41:55 +01:00
bobcanthelpyou
95acfb5493
docs: update sphinx config to v1.4.9 2019-02-03 22:41:55 +01:00
Manu.WTF
04cca280a1 ramips-mt7620: add support for Nexx WT3020 (8M) 2019-01-17 22:42:10 +01:00
Matthias Schiffer
cdbd7b65df
docs: releases/v2018.2: fix feature/package name for config wizard map 2019-01-02 20:20:18 +01:00
Ralf Jung
591107111c
docs: releases/v2018.2: add renamed target information to changelog 2019-01-02 20:17:14 +01:00
David Bauer
55d2acd709 ramips-mt76x8: remove broken flag (#1608) 
This commit removes the broken flag from all devices in the mt76x8
subtarget.

The stability of the mt76 driver for the mt7628 and mt7612 has greatly
improved in the last half-year. It might be still behind ath9k and
ath10k but it is suitable for daily use.

This affects the following devices:

 - GL.iNet MT300N v2
 - TP-Link Archer C50 v3
 - TP-Link TL-WR841 v13
 2018-12-29 23:32:02 +01:00
Martin Weinelt
656230a79f ar71xx: add support for FRITZ!Repeater 300E (#1604) 
Signed-off-by: Martin Weinelt <martin@darmstadt.freifunk.net>
 2018-12-29 22:51:57 +01:00
Matthias Schiffer
497b77b5db
docs: post-release version bump 2018-12-29 21:18:53 +01:00
Matthias Schiffer
3699ce8c1f
Gluon v2018.2 2018-12-29 21:07:59 +01:00
Matthias Schiffer
e8aa119289
docs: add v2018.2 release notes 2018-12-29 21:04:59 +01:00
David Bauer
9bb91e7846
docs: add pointer for AVM flash instructions 
Adds a footnote with a link to an instruction on how to flash Gluon onto
AVM routers.

Signed-off-by: David Bauer <mail@david-bauer.net>
 2018-12-29 21:03:50 +01:00
Matthias Schiffer
e0f2257e4f
docs: add TL-WR810N v1 to device list 2018-12-29 20:13:31 +01:00
Matthias Schiffer
a6bce7959d
ramips-mt76x8: remove VoCore 2 BROKEN flag again 
The driver has stablized enough to officially support ramips-mt76x8 devices
again. At least remove BROKEN for VoCore 2 (as it was supported before).
 2018-12-29 19:31:51 +01:00
Andreas Ziegler
5746fb08c4 ramips-mt7621: remove BROKEN flag for ZBT WG3526-16M & WG3526-32M 2018-12-28 21:15:29 +01:00
Matthias Schiffer
d535b4708e
docs: remove ramips-mt76x8 target from supported devices 
The ramips-mt76x8 target is marked as BROKEN.
 2018-12-26 18:10:19 +01:00
Matthias Schiffer
15c471642e
docs: add Gluon v2018.1.4 release notes 2018-12-26 16:37:02 +01:00
Andreas Ziegler
0df910bb48 docs: add D-Link DIR-860L (B1) to supported hardware list 2018-12-24 12:56:53 +01:00
Andreas Ziegler
74f6372348 docs: standardize revision notation in supported hardware list 2018-12-24 12:56:17 +01:00
Christoph Krapp
b5aa8c2f7c ar71xx: add support for ZyXEL NBG6616 
Signed-off-by: Christoph Krapp <achterin@googlemail.com>
 2018-12-20 14:12:50 +01:00
Micha Lenk
4aebb0fd17 docs: getting_started: Update to Debian Stretch (#1602) 
I just followed this document on a Debian Stretch, and it worked out of
the box. So let's use Debian's current stable release here.
 2018-12-20 01:06:01 +01:00
Christoph Krapp
1c590ca148 ar71xx: add support for UniFi-AC-Mesh-Pro 
Signed-off-by: Christoph Krapp <achterin@googlemail.com>
 2018-12-09 20:41:56 +01:00