nils/gluon
1
0
Fork 0
Code Issues Pull Requests Packages Projects Releases Wiki Activity
4,252 Commits 26 Branches 63 Tags 18 MiB
0cf6fade94
Commit Graph

1604 Commits

Author SHA1 Message Date
Maciej Krüger
0cf6fade94
gluon-mmfd: add firewall rules 2022-07-07 13:52:25 +02:00
Maciej Krüger
583dc69961
gluon-l3roamd: add firewall rules 2022-07-07 13:52:25 +02:00
Maciej Krüger
ef7ef09af8
gluon-mesh-layer3-common: add package 2022-07-07 13:52:24 +02:00
David Bauer
0394047a70
Merge pull request #2574 from blocktrron/lantiq-dsa 
lantiq-xrx200: allow updates from swconfig to DSA
 2022-07-06 22:20:10 +02:00
David Bauer
c06bdd6cfe
gluon-core: only restore WAN proto on upgrade (#2576) 
Only restore the netifd proto for the WAN bridge in case the upgrade is
done from an older Gluon version.

For DSL targets, OpenWrt defaults the WAN proto to pppoe, while Gluon
uses the Ethernet ports for WAN. When unconditionally preserving the WAN
proto, pppoe is carried over to Gluon's network config.

Signed-off-by: David Bauer <mail@david-bauer.net>
 2022-07-06 22:19:55 +02:00
timniklas
39f9bf7ac3
ipq40xx-mikrotik: add support for mikrotik-sxtsq-5-ac (#2573) 
Co-Authored-By: J. Burfeind <github@aiyionpri.me>

Co-authored-by: Tim-Niklas Koch <info@tnkoch.de>
Co-authored-by: J. Burfeind <github@aiyionpri.me>
 2022-07-06 22:18:40 +02:00
David Bauer
3aba0fe610 gluon-core: remove unused lantiq case 
There was never a device with a dedicated WAN port supported in Gluon
which could make use of such a workaround.

As the only relevant lantiq-xrx200 target now uses swconfig anyways,
we can remove this workaround.

Signed-off-by: David Bauer <mail@david-bauer.net>
 2022-07-05 23:45:07 +02:00
J. Burfeind
e5a6233709
ath79-generic: (re)add WBS510 v1 (#2543) 
Gone due to
commit 45c84a117b ("ar71xx: drop target")
 2022-07-03 23:49:38 +02:00
David Bauer
ef3e195340
Merge pull request #2548 from AiyionPrime/ath79-lan-split 
gluon-core: split dual lan devices
 2022-06-25 18:06:46 +02:00
aiyion.prime
8ee1d44567 gluon-core: split dual lan devices 2022-06-25 16:37:45 +02:00
aiyion.prime
ca37f2036c gluon-enter-setup-mode: remove unused pipefail 
posix-sh does not support pipefail this way
 2022-06-22 14:58:30 +02:00
aiyion.prime
4ab486dd2c run-build.sh, gluon_bat0.sh: add double quotes 
to prevent word splitting and globbing
 2022-06-22 14:56:12 +02:00
David Bauer
df07fc8040
gluon-client-bridge: simplify OWE-TM configuration (#2550) 
OpenWrt now allows to specify the ifname of the transition interface
instead of SSID and BSSID, internally automatically detecting these from
interfaces on the same PHY. Thus, these cross-VAP dependant
configuration can be omitted from UCI.

Signed-off-by: David Bauer <mail@david-bauer.net>
 2022-06-19 17:06:02 +02:00
Maximilian Baumgartner
b74287c017
rampis-mt7621: add support for Netgear WAC104 (#2557) 
Co-authored-by: Maximilian Baumgartner <aufhaxer@googlemail.com>
 2022-06-17 23:27:06 +02:00
J. Burfeind
1f4c5681e4
ath79-generic: add support for CPE710v1 (#2558) 2022-06-17 23:12:36 +02:00
J. Burfeind
1ab1df080e
ath79-generic: (re)add support for NanoStation Loco M2 (XW) (#2547) 
Gone due to
commit 45c84a117b ("ar71xx: drop target")
 2022-06-16 14:52:05 +02:00
Matthias Schiffer
ae7b87b0f0
Merge pull request #2520 from freifunk-gluon/check-updater-branch 
gluon-autoupdater: check default branch name, check number of pubkeys, revert invalid branch on update/reconfigure
 2022-06-11 10:32:19 +02:00
J. Burfeind
2887adef5f
ath79-generic: (re)add support for NanoBeam M5 (XW) (#2432) 
Gone due to
commit 071cf7b20f ("Switch to Lua for target definitions")

Has prior been introduced as untested -> broken in
commit d586720c5c ("ar71xx-generic: add support for Ubiquiti NanoBeam M5")

Was commented out in the former commit.
 2022-05-30 20:44:43 +02:00
Jan
b690939fae
ramips-mt7620: remove "broken" status for ASUS RT-AC51U (#2494) 2022-05-27 21:40:05 +02:00
Matthias Schiffer
92a6b81e8a
gluon-autoupdater: check that good_signatures does not exceed number of provided pubkeys 2022-05-27 12:12:26 +02:00
Matthias Schiffer
53cf8796c7
gluon-autoupdater: revert to default branch when configured branch is invalid 
An invalid branch may be set for various reasons:

- Previous firmware had an invalid default branch
- Branch list has changed and old UCI branch config was removed by a
  site-specific upgrade script
- Manual UCI configuration
 2022-05-27 12:00:32 +02:00
Matthias Schiffer
2c65f0834b
gluon-autoupdater: factor out default_branch() function 
Make the code clearer and prepare for invalid branch fixup.
 2022-05-27 12:00:32 +02:00
Matthias Schiffer
db48b6b693
gluon-autoupdater: check default branch name 
Check the default branch (both from site.conf and GLUON_AUTOUPDATER_BRANCH)
against the list of configured branch names to avoid misconfiguration.
 2022-05-27 12:00:32 +02:00
Matthias Schiffer
d24ae56378
gluon-core: check-site: support checking "custom" values 
The new "value" helper can be used to turn a Lua value into a path that
can be passed to need_*() etc.
 2022-05-27 12:00:31 +02:00
Matthias Schiffer
674ec7b64a
ath79-generic: re-add support for Ubiquiti UniFi AP Outdoor+ (#2440) 
Removed in 45c84a117b ("ar71xx: drop target").
 2022-05-26 23:35:18 +02:00
David Bauer
1ef3edbe58
Merge pull request #2352 from lemoer/pr_site_vpn_mtu_in_provider 
RFC: gluon-mesh-vpn-*: make MTU of VPN device provider specific
 2022-05-22 11:45:10 +02:00
J. Burfeind
36f406746e
gluon-status-page: fix mesh-vpn section for wg (#2502) 
Since freifunk-gluon/packages#250 mesh-vpn-peers
can be empty arrays if they're not connected
and the node is in a WireGuard site.
 2022-05-21 20:27:14 +02:00
lemoer
7c81897b4c gluon-mesh-vpn-*: make vpn MTU provider specific 
If a community uses different vpn providers, they typically
assume the same MTU for the wan device underneath the VPN. As
different VPN providers however have different overhead, the MTU
of the VPN device differs for each provider. Therefore this
commit makes the MTU of the VPN device provider specific.

This has two advantages:
1. The same site.conf can used to bake firmwares for different
   VPN providers (only by selecting a diferent vpn feature in the
   site.mk).
2. We are coming closer to the option of integrating multiple VPN
   providers into one firmware.
 2022-05-21 18:12:49 +02:00
Maciej Krüger
57c0bdbf56
gluon-core: add post-setup.d .keep (#2525) 
This folder is referenced in files/lib/netifd/proto/gluon_mesh.sh, but 
there's no .keep for it
 2022-05-20 18:59:37 +02:00
J. Burfeind
02edf564bd
ath79-generic: (re)add CPE210v3 (#2506) 
Gone due to
commit 45c84a117b ("ar71xx: drop target")
 2022-05-13 23:36:34 +02:00
Matthias Schiffer
b68f2484ff
treewide: remove leftover GLUON_SPECIALIZE_KERNEL dependencies (#2514) 
This was removed in commit c23bc293ef ("treewide: remove
GLUON_SPECIALIZE_KERNEL").
 2022-05-08 12:14:03 +02:00
David Bauer
56eaf4aa28
treewide: switch crypto lib to WolfSSL (#2509) 
WolfSSL has a significant lower flash footprint. Also, issues with OWE /
SAE connections were fixed in OpenWrt a while ago.

See ddcb970274

Signed-off-by: David Bauer <mail@david-bauer.net>
 2022-05-07 15:17:03 +02:00
David Bauer
d656d38c7c mesh-vpn-core: require legacy iptables 
Require legacy iptables, as Gluon still depends on firewall3. Otherwise,
nftables is pulled in as a dependency.
 2022-05-06 20:55:57 +02:00
David Bauer
3dc3b40819 treewide: replace ip6tables with ip6tables-legacy 2022-04-30 16:35:06 +02:00
Matthias Schiffer
a27edd4baa
Merge pull request #2459 from ffgraz/cm 
gluon-setup-mode: add gluon-enter-setup-mode
 2022-04-27 18:36:59 +02:00
Matthias Schiffer
1992383134
Merge pull request #2457 from MyIgel/statuspage-fix-tables 
gluon-status-page: explicitly add tbody element to fix table manipulation
 2022-04-27 17:20:24 +02:00
Igor Scheller
1ceb4428da gluon-status-page: Use querySelector instead of firstElementChild 2022-04-17 23:26:17 +02:00
Igor Scheller
68a5a74d1d gluon-status-page: Move mesh vpn id to table body, directly use table body 2022-04-17 23:10:40 +02:00
Matthias Schiffer
a8d25670ce
gluon-core: use copy of "WAN" role list for "single" default (#2478) 
Instead of using roles.wan directly as the default for roles.single,
create a copy of the table, so subsequent modifications of roles.single
don't affect roles.wan as well.

Fixes migration of Mesh-on-WAN status when no default for "single"
interfaces is set in site.conf.
 2022-04-17 20:46:53 +02:00
Matthias Schiffer
1252871217
gluon-core: fix gluon.util.get_role_interfaces() with empty role list (#2472) 
The function failed when an interface has no roles assigned, breaking
several upgrade scripts.

Closes #2471
 2022-04-17 01:19:22 +02:00
Matthias Schiffer
4225bd3853
gluon-core: fix setting interface default roles from site.conf (#2463) 
Make the code match the docs and check_site.lua by actually looking up
the "default_roles" field, not "roles".
 2022-04-13 00:49:46 +02:00
Igor Scheller
ea7b3163d1 gluon-status-page: Code clarification and formatting 2022-04-11 23:51:19 +02:00
J. Burfeind
684b4a80a0
ath79-generic: (re)add support for wbs210v1 (#2461) 
Gone due to
commit 45c84a117b ("ar71xx: drop target")
 2022-04-08 00:18:34 +02:00
Maciej Krüger
1d7d50cf23
gluon-setup-mode: use gluon-enter-setup-mode 2022-04-06 22:30:02 +02:00
Maciej Krüger
cc49806e08
gluon-setup-mode: add gluon-enter-setup-mode 
Script to enable setup mode and reboot

Fixes #2412
 2022-04-06 22:29:45 +02:00
Igor Scheller
3e0a6a64e3 gluon-status-page: Use <tbody> as browsers can add it automatically 2022-04-03 13:54:20 +02:00
J. Burfeind
dfa209a88a
ath79-generic: (re)add NanoStation M2/M5 (XW) (#2443) 
Gone due to
commit 45c84a117b ("ar71xx: drop target")
 2022-04-03 00:01:38 +02:00
J. Burfeind
39c3c7adf3
ath79-generic: (re)add support for UniFi AP PRO (#2416) 
Ubiquiti UniFi AP PRO

Gone due to
commit 45c84a1 ("ar71xx: drop target")
 2022-03-26 11:11:32 +01:00
J. Burfeind
087c15ae0c
ath79-generic: (re)add support for UniFi AC Mesh (#2428) 
Gone due to
commit 45c84a117b ("ar71xx: drop target")
 2022-03-26 10:52:35 +01:00
J. Burfeind
1bfad8ff02
ath79-generic: (re)add support for CPE510 v1.x (#2430) 
Gone due to
commit 45c84a117b ("ar71xx: drop target")
 2022-03-25 23:39:19 +01:00