Matthias Schiffer
1026465f47
gluon-core: upgrade/110-network: fix formatting
2018-02-03 03:05:06 +01:00
Matthias Schiffer
c2c439013c
gluon-ebtables-filter-multicast: do not filter out Bridge Loop Avoidance
...
batman-adv uses gratuitous ARP packets with certain target addresses for
BLA.
Fixes #1198
2018-01-30 18:36:41 +01:00
Karsten
3ad5937b37
gluon-web-network: make 'PoE Power Port[0-9]' translatable ( #1173 )
...
(cherry picked from commit 35237c2ca1
2017-12-30 22:24:46 +01:00
kb-light
7c2636d282
gluon-web-network: make poe_passthrough more generic
2017-11-15 22:51:12 +01:00
kb-light
7268e49a30
gluon-core: update lib/gluon/upgrade/150-poe-passthrough for naming within lede
2017-11-15 22:51:08 +01:00
kb-light
20f693bc4a
gluon-core: lib/gluon/upgrade/150-poe-passthrough: fix indentation
2017-11-15 22:50:59 +01:00
Matthias Schiffer
9cecb1e836
gluon-mesh-batman-adv: filter out all packages between bat0 and local-port
...
Filtering by MAC address won't filter out multicast packages like router
solicitations, causing uradvd to send out router advertisements with
maximum frequency (every 3 seconds) in active meshes, even when no local
client is actually interested in the advertisements.
Fixes #1230
2017-10-03 17:18:27 +02:00
Matthias Schiffer
5463f925ea
gluon-autoupdater: mirror URLs must start with http://
...
The older busybox-based wget erroneously accepted URLs without protocol.
Add validator to avoid building firmwares with broken autoupdates.
2017-09-05 19:06:30 +02:00
Matthias Schiffer
973c6dd479
gluon-mesh-batman-adv: fix radvd start with dns.servers, but without next_node.ip config
2017-08-11 20:58:41 +02:00
Matthias Schiffer
d513b22e37
gluon-mesh-vpn: fix fastd <-> tunneldigger migration
...
The generic upgrade script is moved to run after the more specific scripts.
In addition, the script will now remove the configuration sections of
uninstalled VPN packages, so both positive and negative changes of the
default enable state can be migrated correctly.
Based-on-patch-by: Cyrus Fox <cyrus@lambdacore.de>
Fixes : #1187
2017-08-08 01:59:41 +02:00
Matthias Schiffer
c197d028ec
gluon-mesh-batman-adv: preserve gw_mode on upgrades
...
When a Gluon node is used to connect to an uplink router/DHCP server (for
example in deployments without VPN tunnels), the gw_mode must be set to
server; this should be preserved on upgrades.
Fixes #1196
2017-07-25 23:56:03 +02:00
Steffen Förster
826ac88493
gluon-mesh-batman-adv: enable routing algorithm configuration through site.conf
...
[Matthias Schiffer: move to proto_gluon_bat0_setup() and default to BATMAN_IV]
2017-07-19 18:12:29 +02:00
Sunz3r
568997f10f
gluon-config-mode-mesh-vpn: add tunneldigger to reboot page ( #1172 )
2017-07-06 13:24:45 +02:00
Ruben Barkow
7559df3050
gluon-web-admin: typo "your node" ( #1169 )
2017-07-03 01:45:46 +02:00
Matthias Schiffer
9dae2ebbfd
gluon-mesh-vpn-fastd: respondd: adjust for new site.conf mesh VPN structure
...
Fixes #1130
2017-06-01 16:23:51 +02:00
Matthias Schiffer
1ed87c6df4
gluon-mesh-batman-adv: enable bridge learning on bat0 again
...
Reverts d5829d87beFixes #1121
2017-05-12 15:43:31 +02:00
Christof Schulze
5bf3c895d0
gluon-mesh-batman-adv: announce dns server if dns cache was configured ( #1105 )
2017-04-27 21:11:23 +02:00
Linus Lüssing
c519ec4596
gluon-core: reenable multicast snooping for wan zone
...
LEDE recently disabled multicast snooping by default:
https://git.lede-project.org/?p=project/netifd.git;a=commitdiff;h=52541140f8138e31958cdc3d7e42a4029fa6bbc9
Reenable it for Gluon as there have been no confirmed issues for
LEDE and no negative reports concerning Gluon v2016.2.x so far.
Closes #1025 .
Signed-off-by: Linus Lüssing <linus.luessing@c0d3.blue>
2017-04-13 22:31:47 +02:00
Linus Lüssing
66ead88dcb
gluon-client-bridge: reenable multicast snooping for client zone
...
LEDE recently disabled multicast snooping by default:
https://git.lede-project.org/?p=project/netifd.git;a=commitdiff;h=52541140f8138e31958cdc3d7e42a4029fa6bbc9
Reenable it for Gluon as there have been no confirmed issues for
LEDE and no negative reports concerning Gluon v2016.2.x so far.
Closes #1025 .
Signed-off-by: Linus Lüssing <linus.luessing@c0d3.blue>
2017-04-13 22:31:31 +02:00
Matthias Schiffer
e45c30330d
gluon-mesh-batman-adv: refactor interface management
...
We now create bat0 and primary0 independently of the lower mesh interfaces,
making the whole setup a lot more robust. In particular:
- we can't accidentially destroy primary0 because of concurrent setup and
teardown runs of different interfaces
- bat0 will always exist, even when no mesh interfaces are up (e.g. no link
on wired mesh)
- interfaces going down and up again will never tear down the whole of
batman-adv
- we can enable and disable bat0 independently of the lower interface
states
2017-04-12 19:23:08 +02:00
Matthias Schiffer
4ca67dcca5
gluon-mesh-batman-adv-*: unify into a single source package
...
For simplicity, we don't use different MTUs for compat 14 and 15 anymore,
there's no harm in using 1532 for batman-adv-legacy as well.
2017-04-12 04:22:45 +02:00
Matthias Schiffer
a502295eaf
gluon-core: gluon_mesh: make transitive and fixed_mtu available as interface data, add post-setup.d
...
In addition, transitive and fixed_mtu now default to 0 instead of an empty string.
2017-04-12 03:44:45 +02:00
Matthias Schiffer
c4641d47fd
gluon-mesh-batman-adv-core: dont' call 'ip' to check if primary0 exists
2017-04-11 02:01:38 +02:00
Matthias Schiffer
02f2d8796c
gluon-core: don't call 'ip' to check if an interface exists
2017-04-11 02:01:21 +02:00
Matthias Schiffer
c4613c4e8d
gluon-core: gluon.util: pass UCI cursor to get_wlan_mac(), get rid of local UCI context
2017-04-11 01:48:11 +02:00
Matthias Schiffer
f48d10bdde
gluon-core: gluon.util: pass UCI cursor as argument to iterate_radios() instead of using local context
2017-04-11 01:48:11 +02:00
Julian Labus
901b122d83
gluon-web-wifi-config: use find_phy from gluon.util
2017-04-11 01:48:11 +02:00
Julian Labus
734d1925de
gluon-core: gluon.util: fix PHY detection for radios addressed by PCIe address
2017-04-11 01:48:10 +02:00
Matthias Schiffer
da22c5cf8e
gluon-core: gluon.util: change find_phy argument to config table and make public
2017-04-11 01:48:10 +02:00
Matthias Schiffer
6499658b52
gluon-mesh-batman-adv-core: don't print error message when no_rebroadcast is not supported
...
batman-adv 2017.0 doesn't need (or support) no_rebroadcast anymore. Don't
fail when the file doesn't exist.
2017-04-10 01:32:30 +02:00
kb-light
eefd2ef8db
Add package gluon-ebtables-source-filter ( #1015 )
2017-04-09 18:18:51 +02:00
Julian
13c61d9394
gluon-core: fix pattern %v in opkg URLs ( #1087 )
2017-04-07 14:24:13 +02:00
Cyrus
6a0ca58fc3
gluon-core: Fixed bug which kept legacy VLAN interface definitions ( #1085 )
2017-04-03 20:48:42 +02:00
Cyrus
540d0ff0a3
gluon-mesh-vpn-core: Fixed conditions for migration code ( #1080 )
...
VPN daemons were always disabled
2017-03-26 10:26:33 +02:00
Cyrus Fox
aa17e3e86e
gluon-mesh-vpn-tunneldigger: ignore default config when checking for legacy configs
2017-03-23 12:51:41 +01:00
Matthias Schiffer
da19961188
gluon-web: javascript: don't use global RegExp.$x matches, fix "this" for parameterized validators
...
Doing so caused broken validations, as different validators were affecting
each other.
2017-03-10 22:25:00 +01:00
Matthias Schiffer
b016cf18b4
gluon-mesh-vpn-core: add code for migration of enabled state between fastd and tunneldigger
...
Based-on-patch-by: Cyrus Fox <cyrus@lambdacore.de>
2017-03-10 19:45:35 +01:00
Matthias Schiffer
a49ef70c53
gluon-config-mode-mesh-vpn: add tunneldigger support
...
Based-on-patch-by: Cyrus Fox <cyrus@lambdacore.de>
2017-03-10 19:45:34 +01:00
Cyrus Fox
ad7a36fdce
gluon-mesh-vpn-tunneldigger: add package for tunneldigger L2TP support
2017-03-10 19:45:34 +01:00
Matthias Schiffer
be88eba07f
Refactor common parts of gluon-mesh-vpn-fastd into a gluon-mesh-vpn-core package
...
The fastd_mesh_vpn site.conf section is renamed to mesh_vpn.fastd.
2017-03-10 19:45:34 +01:00
Matthias Schiffer
41a9f9b06c
gluon-mesh-batman-adv-core: fix ARP resolution of next-node IPv4 address
...
The ebtables rules were not adjusted when switching from macvlan to veth.
2017-03-08 22:52:25 +01:00
Matthias Schiffer
7222fc07d1
gluon-web-private-wifi: fix default value of "enabled" setting
2017-03-02 15:09:49 +01:00
Matthias Schiffer
8245e77218
gluon-status-page: fix browser compatiblity of language selection
2017-02-26 20:55:31 +01:00
Matthias Schiffer
959c8ae7f8
gluon-status-page: use unique filenames for dependencies, switch to SHA256 checksums
2017-02-26 19:46:33 +01:00
Christof Schulze
b7651ee96f
gluon-core: limit fq_codel memory to 1MB per AP with less than 48MB RAM ( #1046 )
2017-02-24 19:43:32 +01:00
Christof Schulze
946d873c14
gluon-status-page-api: limit uhttp max_requests to 16 on devices with <48MB RAM ( #1045 )
2017-02-24 19:38:40 +01:00
Matthias Schiffer
28f42b24a8
gluon-setup-mode, gluon-status-page-api: remove references to rpcd
...
rpcd is not included in our images anymore since switching to gluon-web, so
we don't need to disable it anymore.
2017-02-24 00:44:03 +01:00
Jan-Tarek Butt
c9f62fc278
gluon-mesh-batman-adv-core: Move lua file into luasrc dir
2017-02-23 20:27:23 +01:00
Matthias Schiffer
b45585a109
Switch LAN and WAN port of Ubiquiti AirGateway
...
This makes the LAN port the PoE master, so the AirGateway can be used to
supply power to another node connected via mesh-on-LAN.
Fixes #608
2017-02-23 19:49:39 +01:00
Matthias Schiffer
f0b919e89c
gluon-client-bridge: add next-node IPv6 address as deprecated
...
We always want to prefer the unique node address for outgoing traffic. Note
that this doesn't have an effect with batman-adv, as usually br-client will
be the outgoing interface, so the unique address would be chosen anyways.
2017-02-23 17:58:44 +01:00
