This adds a new package which allows configuration of Gluons cellular
WWAN capabilities using the configuration mode. This way, a user can
enter APN information as well as the SIM PIN and enable / disable the
functionality.
Signed-off-by: David Bauer <mail@david-bauer.net>
Add cellular configuration support to Gluon. This implementtaion focuses
not on hotpluggable WWAN adapters but instead on embedded LTE modems
found in travel-routers or FWA CPEs.
Signed-off-by: David Bauer <mail@david-bauer.net>
6c3e16055a kernel: backport ksmbd security fix ZDI-22-1690
275c51bf40 Revert "image-commands.mk: Be consistent in command invocation"
fec4fb3a56 sunxi: remove frequency for NanoPi R1
51a763ab0f arm-trusted-firmware-sunxi: drop CPE ID
377d805887 trusted-firmware-a.mk: use correct CPE ID
f30414c56d kernel: bump 5.10 to 5.10.160
47ac52a7c4 ath79: image: don't depend on other COMPILE targets
da79da3ac1 image: fix device profile specific COMPILE targets
9aa95bbebb rules: fix broken commitcount on alpine system
fcff234fd8 image-commands.mk: Be consistent in command invocation
be7b97d873 sunxi: fix typo in device packages for MarsBoard A10
709351bf32 kernel: Make KERNEL_MAKEOPTS recursively expanded
3b066a6581 lantiq: vr9: include usb driver for fritz 7430
39dcfcd987 wolfssl: fix build with /dev/crypto
e51f3a22aa toolchain: Update glibc 2.34 to recent HEAD
298d2d0412 Revert "mbedtls: import patch to fix illegal instruction on mpc85xx"
3de4572ed3 tools/ccache: fix build with musl and gcc 12
8e43a44f08 rpcd: update to latest Git HEAD
f43ceb60d5 iwinfo: update to latest Git HEAD
31baecb70e iwinfo: update to the latest version
f34c4a950e iwinfo: update to the latest version
9b7a3e1a5e iwinfo: update to the latest version
ce881873c0 kernel: add missing dependency to KERNEL_RPI_AXIPERF
7ccb4c6651 kernel: add missing symbol for bcm27xx
b18a0d0b92 generic: add support for EON EN25QX128A spi nor flash
d909fb1d3b kernel: bump 5.10 to 5.10.159
e5cec69484 kernel: bump 5.10 to 5.10.158
3a58bda06b kernel: bump 5.10 to 5.10.157
ee2341cac6 kernel: add symbol in generic config for 5.10.157
bc64ca15d4 kernel: kmod-net-rtl8192su: Remove package
b1204ce28c umbim: Allow roaming and partner connections
15bc6b23c7 kernel: further cleanup of xfrm[4|6]_mode*
6e396eff1a kernel: remove handling of xfrm[4|6]_mode_* modules
78fc12ddd0 kernel: fix typo for tegra crypto-sha1 module
4408f7d564 kernel: add kmod-btsdio package
6b2c445b88 kernel: remove CONFIG_MMC_BLOCK_BOUNCE
aef33ab13a ath79: fix Teltonika RUT230 v1 MAC assignment
The main difference between the non-EFI and EFI images generated by
OpenWrt is that the former uses an MS-DOS partition table, while the
latter uses GPT. The EFI images still have a BIOS-compatible MBR, so
they work fine on non-EFI systems.
Closes#2403
I was made aware of a bug when submitting the form while the element is
disabled based on it's dependencies
The fix was to inherit from AbstractValue instead of just node
AbstractValue's AbstractValue:resolve_node_depends() in particular
solves the issue, but it made more sense to just use the full base class
These devices use all LAN ports as a WAN bridge.
Closes#2721
Signed-off-by: David Bauer <mail@david-bauer.net>
Signed-off-by: David Bauer <mail@david-bauer.net>
Adding a cgi-bin script which allows to query a node's respondd over HTTP.
This is especially useful when the response is expected to be large and
a UDP response would lead to an unreliable transfer of multiple IP
fragments, like for the upcoming "statistics-extended" respondd
provider. HTTP/TCP is then the more reliable approach.
Query examples with HTTP GET:
$ curl --compressed "http://<IP6ADDR>/cgi-bin/respondd"
-> defaults to nodeinfo
$ curl --compressed "http://<IP6ADDR>/cgi-bin/respondd?nodeinfo+statistics"
Query examples with HTTP POST:
$ curl --data "" --compressed "http://<IP6ADDR>/cgi-bin/respondd"
-> defaults to nodeinfo
$ curl --data "nodeinfo statistics" --compressed "http://<IP6ADDR>/cgi-bin/respondd"
Signed-off-by: Linus Lüssing <linus.luessing@c0d3.blue>
This package collects disected statistics on multicast
and management traffic and provides them via respondd in
"statistics-extended". Such information can be helpful
for further development and comparison of mesh routing
protocols and troubleshooting network issues.
The statistics gathered disect into batman-adv
packets as well. Statistics are collected both on client
bridge ports and br-client as well as mesh interfaces.
This introduces a performance penalty but tries to
keep the impact on unicast traffic small.
Note that respondd replies are rather large
(several UDP datagrams, even when LZMA compressed).
Therefore you might want to use slower intervals for
querying respondd "statistics-extended".
Signed-off-by: Linus Lüssing <linus.luessing@c0d3.blue>
This ignores the following warning:
warning: In POSIX sh, string replacement is undefined. [SC3060]
As string replacements are supported by ash and we are only going to use
ash.
This allows us to use something short like ${QUERY_STRING//+/ } to
replace all '+' to a whitespace in an URL or to make an ${IFNAME//-/_}
UCI compatible in the future, for example. Instead of needing to use
something long like "echo ${IFNAME} | tr '-' '_'.
Signed-off-by: Linus Lüssing <linus.luessing@c0d3.blue>
04eadf860 dnsproxy: Update to 0.46.4
f5547cfde cloudflared: Update to 2022.11.1
4abdc2f33 github-ci: error on any shell errors
798fe3f59 django: bump version 4.0.8
ce3e9d4b4 natmap: merge "ipv4" and "ipv6" options into single "family" option
0393a5c19 snowflake: update to version 2.4.1
ec2fbd57e natmap: add new package
6cd1035d8d ramips: add support for Wavlink WS-WN572HP3 4G
3f7ce4bd40 comgt-ncm: add support for quectel modem EC200T-EU
03ab5a60da realtek: update GPIO bindings for DGS-1210-10P
63fde4607c ustream-ssl: update to Git version 2022-12-07
1c174fe0ba CI: kernel: don't checkout and install feeds
385f78780c CI: build: skip sdk adapt to external toolchain on cache hit
8be50c369b CI: build: fix use of sdk as toolchain
1af58a2d39 ramips: mt7621: enable lzma-loader for ZyXEL WAP6805
8fbf03690e ramips: mt7621: enable lzma-loader for netis WF2881
282dd271ad kernel: ca8210: Fix crash by zero initializing data
1a0f2c3a3e e2fsprogs: Fix CVE-2022-1304
1285938d2c bcm4908: Refresh kernel patches
bpfcountd was created to obtain packet statistics in larger networks
without stressing the cpu resources. bpfcountd will count the amount
of packages and bytes over time (for each defined rule). The rules
are defined using the tcpdump filter syntax (bpf). The collected
data is provided on a unix socket in plaintext.
Signed-off-by: Linus Lüssing <linus.luessing@c0d3.blue>
