Commit Graph

282 Commits

Author SHA1 Message Date
Sven Eckelmann
ef819cc196 ar71xx: add support for OpenMesh OM2P(-HS)v4 (#1426) 2018-06-09 13:55:38 +02:00
Sven Eckelmann
9d719a2e57 ar71xx: add support for OpenMesh A40/A60 (#1424) 2018-06-08 20:18:30 +02:00
Christoph Krapp
54ff903633 ar71xx: add support for TP-Link TL-WA901ND v5 (#1423) 2018-06-07 22:36:18 +02:00
Vincent Wiemann
33956cd4b3 ar71xx: add support for Alfa AP121F (#1404)
Adds support for Alfa AP121F USB powered travel router (looks like an USB ethernet adapter).
There is no factory image, but only a sysupgrade file for this router which can be installed using the inbuilt UBoot web interface.
Configure your PC with IP address 192.168.1.2 and connect the router using its RJ45 port. Hold the reset button while powering the device until all LEDs have flashed 3 times simultaneously. You can now access the fallback web interface using a web browser at http://192.168.1.1 and flash the sysupgrade file.
2018-05-23 19:32:40 +02:00
Christoph Krapp
68ee56b869 ar71xx: add support for GL.iNet GL-AR750 (#1395) 2018-05-17 22:33:18 +02:00
Christoph Krapp
eaa23aeae6 ar71xx: add support for TP-Link TL-WR940N v6 (#1389) 2018-05-17 01:33:52 +02:00
Andreas Ziegler
59d6b2a4ee ramips-rt305x: correct alphabetical order 2018-05-09 04:00:02 +02:00
Matthias Schiffer
5bd1d88f85
ar71xx-generic: make ubiquiti-rocket-m a separate device
Make ubiquiti-rocket-m a separate device rather than a bullet-m alias to
enable USB support and allow adding devive-specific packages.
2018-05-08 18:39:18 +02:00
David Bauer
22d45448fd ar71xx: add support for Fritz!Box 4020
This commit adds support for the AVM Fritz!Box 4020 WiFi-router.

SoC:   Qualcomm Atheros QCA9561 (Dragonfly) 750MHz
RAM:   Winbond W971GG6KB-25
FLASH: Macronix MX25L12835F
WiFi:  QCA9561 b/g/n 3x3 450Mbit/s
USB:   1x USB 2.0
IN:    WPS button, WiFi button
OUT:   Power LED green, Internet LED green, WLAN LED green,
       LAN LED green, INFO LED green, INFO LED red
UART:  Header Next to Black metal shield
       Pinout is 3.3V - RX - TX - GND (Square Pad is 3.3V)
       The Serial setting is 115200-8-N-1.

Tested and working:
 - Ethernet (LAN + WAN)
 - WiFi (correct MAC)
 - Installation via EVA bootloader
 - OpenWRT sysupgrade
 - Buttons
 - LEDs

Not working:
 - USB port

Installation via EVA:
In the first seconds after Power is connected, the bootloader will
listen for FTP connections on 169.254.157.1 (Might also be 192.168.178.1). Firmware can be uploaded
like following:

  ftp> quote USER adam2
  ftp> quote PASS adam2
  ftp> binary
  ftp> debug
  ftp> passive
  ftp> quote MEDIA FLSH
  ftp> put openwrt-sysupgrade.bin mtd1

Note that this procedure might take up to two minutes. After transfer is
complete you need to powercycle the device to boot OpenWRT.

Signed-off-by: David Bauer <mail@david-bauer.net>
2018-05-08 15:20:02 +02:00
Andreas Ziegler
1531571a7e targets/ipq806x: use ath10k-firmware-qca99x0-ct for 11s and remove BROKEN flag 2018-05-07 00:03:04 +02:00
Matthias Schiffer
a2eb50e0e6
x86: move common parts of x86-generic and x86-64 to include file 2018-04-26 22:59:36 +02:00
Matthias Schiffer
818acd6021
x86: remove bash and wget again
Let's keep the default package selection to hardware support.
2018-04-26 22:55:36 +02:00
Andreas Ziegler
563f351b78 x86: add packages: leds, sensors, gpio, usb, wifi and tools 2018-04-26 20:54:49 +02:00
Matthias Schiffer
02f905f542
ar71xx: build kernel modules used by Gluon into the kernel
ar71xx-generic and -tiny benefit most from the optimized kernel, as they
contain all devices with 32MB RAM. We enable CONFIG_GLUON_SPECIALIZE_KERNEL
for all targets using the mips24_kc architecture so packages shared between
targets don't need to be rebuild all the time.
2018-04-13 17:32:20 +02:00
Matthias Schiffer
d210cfcad9
generic: do not attempt to build kmod-usbip
kmod-usbip is broken since the last kernel update.
2018-04-10 20:25:38 +02:00
Andreas Ziegler
91912f4935 ar71xx-tiny: add support for TP-Link TL-WR940N v5
adding an alias as it uses the same image as the TL-WR940N v4
2018-03-19 23:34:45 +01:00
Jan-Tarek Butt
be286c4c69 ar71xx-generic: set unifi-ac-lr alias on ac-lite 2018-02-20 15:22:21 +01:00
Andreas Ziegler
4315ef7a1f sunxi: cleanup BROKEN flag formatting 2018-02-07 04:03:00 +01:00
Julian
167e1b34dc sunxi: LeMaker Banana Pi: remove BROKEN (#1325) 2018-02-06 18:24:46 +01:00
Vincent Wiemann
273a60fe62 ramips-mt7621: Add support for ZBT-WG3526-32M (#1296)
including backport of mtd patches.

The general flash issue (32MB) was discussed here:
https://gist.github.com/dmke/d389bc364b3f73f525076eaee0019dc1
The resulting patch was the following:
http://lists.infradead.org/pipermail/linux-mtd/2016-December/070889.html

Another patch by nbd168 added the required mtd read operations for supporting ZBT-WG3526-32M:
https://github.com/lede-project/source/commit/22d982e#diff-3835f027e16e6416090c1833bc732af3
2018-02-04 17:42:48 +01:00
Matthias Schiffer
87ced3c5c6
modules: update LEDE
b1205a9211 ar71xx: /lib/ar71xx.sh: add model detection for TP-Link TL-WR810N
fbeae9d891 iptables: make kmod-ipt-debug part of default ALL build
6ea9a702c5 iptables: Fix target TRACE issue
00fa1e4108 curl: fix libcurl/mbedtls async interface
d5278cc48b kernel: bump 4.4 to 4.4.112 for 17.01
2ae0741f3b dnsmasq: backport validation fix in dnssec security fix
58d60bd283 dnsmasq: backport dnssec security fix for 17.01
d626aa005b mountd: bump to git HEAD version
f0336975be kernel: bump 4.4 to 4.4.111 for 17.01
fb6f21c657 kmod-sched-cake: bump to latest cake bake for 17.01
2e8a3bb35f ar71xx: Netgear WNR2000v4: do not include USB packages [17.01]
3fa86282fa build: fix restoring /etc/opkg with PER_DEVICE_ROOTFS
987a7e3175 ramips: fix lenovo newifi-y1 switch and LED config
dbb5ffaed5 ramips: firewrt: indicate boot status via LED
2018-02-03 14:17:29 +01:00
Matthias Schiffer
ff073f55d8
Merge pull request #1318 from rotanid/target-cleanup
target files cleanup: variable checks and comments
2018-01-27 13:04:15 +01:00
Andreas Ziegler
e9362cb724 targets: update & cleanup reasons for BROKEN flags 2018-01-26 14:17:44 +01:00
Andreas Ziegler
e92140c593 targets: remove check if ATH10K_PACKAGES is set
as GLUON_WLAN_MESH now is set by default, ATH10K_PACKAGES is set by default, too
2018-01-26 14:17:35 +01:00
Matthias Schiffer
07dbfea617
gluon-site: disable multidomain support by default 2018-01-26 12:32:46 +01:00
Matthias Schiffer
faceb3932c
config: check if GLUON_DEBUG is 1 rather than nonempty 2018-01-26 12:32:46 +01:00
Andreas Ziegler
a99fdf7919 ramips-mt7621: Netgear WNDR3700v5 has no factory image
fixes build after 3ec63b8c
2018-01-26 01:45:49 +01:00
Andreas Ziegler
d586720c5c ar71xx-generic: add support for Ubiquiti NanoBeam M5
marked as BROKEN for now as it is untested

related issue: #1099
2018-01-20 15:38:49 +01:00
Andreas Ziegler
c4e3cca1d3 ar71xx-tiny: add support for TP-Link TL-WR802N v1
marked as BROKEN for now as it is untested
2018-01-19 23:47:36 +01:00
Andreas Ziegler
708aae5015 ar71xx-generic: add support for TP-Link TL-WR810N
marked as BROKEN for now as it is untested
2018-01-19 23:47:31 +01:00
Andreas Ziegler
3ec63b8c70 ar71xx-generic: add support for Netgear WNDR3700v5
fixes #442
2018-01-19 20:45:29 +01:00
David Bauer
99b02701cc ar71xx: add support for TP-Link Archer C58/C59/C60 (#1281) 2018-01-16 18:51:12 +01:00
Andreas Ziegler
fb93c3b259 ar71xx: correct model name for TL-WR1043N v5, fixes #1307 2018-01-16 18:30:37 +01:00
Tata
919dda90b3 build: introduce GLUON_WLAN_MESH build variable (#1298)
defaults to 11s, allowing to build devices without IBSS-support

obsoletes GLUON_ATH10K_MESH
2018-01-10 15:49:33 +01:00
David Bauer
9273e56c63 ar71xx: add support for TP-Link Archer C7 v4 (#1289) 2018-01-03 16:50:23 +01:00
Jan-Tarek Butt
f514ec13b5
brcm2708-bcm2709: add manifest_alias for raspberry-pi-2-model-b-rev-1.1 2017-12-27 03:06:19 +01:00
Jan-Tarek Butt
7b61cb16f8
brcm2708-bcm2708: add manifest_alias for raspberry-pi-model-b-rev-2
Signed-off-by: Jan-Tarek Butt <tarek@ring0.de>
2017-12-27 03:05:53 +01:00
David Bauer
70784cb3b2 ar71xx: add support for TP-Link TL-WR1043N v5 (#1279) 2017-12-19 04:22:44 +01:00
Steffen Förster
9136562517 ramips-rt305x: add D-Link DIR-615 rev D1-D4 2017-12-08 00:00:35 +01:00
kb-light
17d1c65610
ramips-mt7621: do not tag ubnt-erx(-sfp) as broken
There is no wifi, so there is no bad wifi.

[Matthias Schiffer: rebase onto master]
2017-11-26 12:46:20 +01:00
Karsten Böddeker
64cfd648cb
ramips-mt7621: add support for UBNT EdgeRouter X-SFP
[Matthias Schiffer: remove patch "ramips: simplify ubnt-erx-sfp device
definition", as it depends on other patches that have not been backported]
2017-11-26 12:44:52 +01:00
Andreas Ziegler
1ca402ee46 ramips-mt7621: ZBT-WG3526 has no factory image 2017-11-23 03:09:03 +01:00
Andreas Ziegler
14ef0387ea ramips-mt7621: add ZBT-WG3526 2017-11-23 03:05:58 +01:00
Andreas Ziegler
a040ec0083
ar71xx: add TP-Link Archer C25 (#1238)
BROKEN because of stability issues with 5GHz enabled.
2017-10-22 01:43:20 +02:00
Matthias Schiffer
08cbbf9925
build: move all generic config generation to targets/generic
As the default package list is now handled using the 'packages' directive,
explicit wpad-mini removals in target definitions can be dropped.
2017-09-07 03:21:42 +02:00
Matthias Schiffer
587c5016cb
build: handle generic and target-specific config in the same run of target_config{,_check}.sh
This, together with a new try_config directive, will allow checking the
generic config and make it more flexible.
2017-09-07 00:17:57 +02:00
Steffen Förster
b325f00599
ramips-mt7620: add new subtarget with some Gl.Inet devices 2017-09-06 20:58:51 +02:00
hexa-
c3c6ea0cd7 brcm2708: drop wpad-mini as it clashes with hostapd-mini (#1205) 2017-08-13 21:43:57 +02:00
Steffen Förster
e395284156 brcm2708: add target and platform for raspi3 (#1204)
This device has built in wifi we should include it at least for experiments.
2017-08-13 15:53:11 +02:00
Matthias Schiffer
085cf0debf
ar71xx-generic: add alias for Ubiquiti UniFi Mesh
Fixes #1021
2017-08-08 12:08:09 +02:00