688901a664eb bird2: Add package
ecbdeb0500cc bird: Rename to bird1 and bump to v1.6.4
453de2136e2f nodogsplash2: update to version 2.1.1 (#376)
a71ecc3dddc4 babeld: Update to 1.8.2
209877071051 miniupnpd: drop from repo
6e47c22268d5 ar71xx: Deactivate build of Netgear WNR2000v3
9dd189d4adc4 mvebu: Add support for WRT3200ACM with new NAND flash
adfd64ddd62c brcm47xx: add switch port mapping to Asus WL-500W
4a38c0cad5b2 odhcpd: fix managed address configuration setting
058a0b7552f8 apm821xx: Add default packages to NAND target
6eec0e46ed33 wireguard: bump to 20180519
5ad80ff24b27 wireguard: no longer need portability patch
83089916dcc3 wireguard: bump to 20180514
6cc65b05f311 wireguard: Add support for ip6prefix config option
0e3cc084968f wireguard: bump to 0.0.20180513
4cb9af80dd9b wireguard: bump to 20180420
9e5bed665259 wireguard: bump to 20180304
57e773bd4ea7 wireguard: bump to 20180202
90d9df048b47 wireguard: bump to 20180118
161d95f4c5a7 kernel: bump kernel 4.4 to 4.4.132 for 17.01
2c0cd47dab77 rpcd: update to lastest HEAD
7b54d52a443e kernel: use accepted version of bcm47xxpart fix commit
3c81d12ec328 bcm53xx: backport the first bunch of 4.18 BCM5301X patches
b07875308476 ar71xx: fix and improve ALFA Network Tube2H support
e8b1af45f8b2 kernel: bump kernel 4.4 to 4.4.131 for 17.01
c34d129afb48 batman-adv-legacy: update to git version 2018-06-03
ed7ed7dcbaf0 autoupdater: allow skipping the version check (#187)
6268f870f17f mmfd: bump version to use new libbabelhelper, do not start verbose
f51707e1c5fd libbabelhelper: bump version for new lexer
d3391981cd09 l3roamd: bump version
A reference to the best gateway is taken when the list of gateways in the
mesh is sent via netlink. This is necessary to check whether the currently
dumped entry is the currently selected gateway or not. This information is
then transferred as flag BATADV_ATTR_FLAG_BEST.
After the comparison of the current entry is done,
batadv_*_gw_dump_entry() has to decrease the reference counter again.
Otherwise the reference will be held and thus prevents a proper shutdown of
the batman-adv interfaces (and some of the interfaces enslaved in it).
Fixes: 899235a4a637 ("Merge pull request #241 from ecsv/batman-adv-2016.4-maint-2016-10-29")
Reported-by: Andreas Ziegler <dev@andreas-ziegler.de>
Signed-off-by: Sven Eckelmann <sven@narfation.org>
Adds support for Alfa AP121F USB powered travel router (looks like an USB ethernet adapter).
There is no factory image, but only a sysupgrade file for this router which can be installed using the inbuilt UBoot web interface.
Configure your PC with IP address 192.168.1.2 and connect the router using its RJ45 port. Hold the reset button while powering the device until all LEDs have flashed 3 times simultaneously. You can now access the fallback web interface using a web browser at http://192.168.1.1 and flash the sysupgrade file.
* do not allow to obligatorily require contact information
* add remark that the data is provided voluntarily
* mention how to delete the data
* be very clear about the fact that the data being entered is public and
can be downloaded and processed by anyone.
This commit adds support for the AVM Fritz!Box 4020 WiFi-router.
SoC: Qualcomm Atheros QCA9561 (Dragonfly) 750MHz
RAM: Winbond W971GG6KB-25
FLASH: Macronix MX25L12835F
WiFi: QCA9561 b/g/n 3x3 450Mbit/s
USB: 1x USB 2.0
IN: WPS button, WiFi button
OUT: Power LED green, Internet LED green, WLAN LED green,
LAN LED green, INFO LED green, INFO LED red
UART: Header Next to Black metal shield
Pinout is 3.3V - RX - TX - GND (Square Pad is 3.3V)
The Serial setting is 115200-8-N-1.
Tested and working:
- Ethernet (LAN + WAN)
- WiFi (correct MAC)
- Installation via EVA bootloader
- OpenWRT sysupgrade
- Buttons
- LEDs
Not working:
- USB port
Installation via EVA:
In the first seconds after Power is connected, the bootloader will
listen for FTP connections on 169.254.157.1 (Might also be 192.168.178.1). Firmware can be uploaded
like following:
ftp> quote USER adam2
ftp> quote PASS adam2
ftp> binary
ftp> debug
ftp> passive
ftp> quote MEDIA FLSH
ftp> put openwrt-sysupgrade.bin mtd1
Note that this procedure might take up to two minutes. After transfer is
complete you need to powercycle the device to boot OpenWRT.
Signed-off-by: David Bauer <mail@david-bauer.net>
This commit adds information about:
- how cpu time is spent since boot in jiffies (1/100*sek) (cpu)
- the value is summed for all cores, so in 10 seconds the
summed values will increase by 4000, if the cpu has
4 cores
- context switches since boot (ctxt)
- interrupt counters since boot (intr, softirq)
- forks since boot (processes)
{ "stat": {
"cpu": {
"user": 219403,
"nice": 1714,
"system": 75159,
"idle": 2727739,
"iowait": 2943,
"irq": 0,
"softirq": 571
},
"intr": 8426340,
"ctxt": 50992590,
"processes": 10549,
"softirq": 5161884
} }
999bb66b20b0 kernel: add missing in6_dev_put_clear call to an ipv6 network patch
81573ea25924 kernel: bump kernel 4.4 to 4.4.129 for 17.01
afa887388766 gcc: gcc 6.3.0 fix comparison between pointer and integer
In multidomain setups, VXLAN is enabled by default, but can be disabled in
domain configs using the mesh/vxlan option. In single domain setups, the
mesh/vxlan option is mandatory.
The UCI option for legacy mode is removed.
Fixes#1364
efb6ca189641 base-files: /lib/functions.sh: ignore errors in insert_modules
b5ba01a0d3f6 fstools: update to latest lede-17.01 branch
a9b607740273 kernel: bump kernel 4.4 to 4.4.126 for 17.01
09d95e44fc3d mbedtls: change libmbedcrypto.so soversion back to 0
4673a0bffc89 kernel: mtd: bcm47xxpart: improve handling TRX partition size
Also switch to the upstreamed version of "kernel: disable accept_ra by
default".
