Manu.WTF
3b0e5fab71
ramips-mt7620: add support for Xiaomi MiWifi Mini ( #1638 )
2019-03-29 12:43:05 +01:00
David Bauer
a9a4abb637
ipq806x: add support for NETGEAR R7800 ( #1669 )
...
The device is broken until the next release. The LEDs are currently not
working (fixed in current OpenWRT master).
Also give a brief explanation about the BROKEN status being dependent on
the WiFi chip used and not the SoC family in general.
2019-03-28 14:49:17 +01:00
Martin Weinelt
9153b38117
gluon-core: fix unifiac-{lite,pro} primary mac selection
...
fixes #1629
2019-01-25 01:50:53 +01:00
Martin Weinelt
c4d435c9c7
gluon-core: sort 010-primary-mac by target and board_name
2019-01-25 01:50:53 +01:00
David Bauer
888cddb662
gluon-core: distribute dualband radios ( #1606 )
...
This commit distributes dualband radios evenly on 2.4 GHz and 5GHz with
2.4 GHz being prioritised higher than 5 GHz. This means in case a device
has only a single radio and this radio supports operation in both bands,
it will be set to 2.4 GHz.
Tested-by: Martin Weinelt <martin@darmstadt.freifunk.net>
Signed-off-by: David Bauer <mail@david-bauer.net>
2018-12-29 21:48:12 +01:00
Julian
68ee1db91e
gluon-core: fix pattern %v in opkg URLs ( #1594 )
...
$VERSION_ID is a lowercase value
2018-12-02 16:59:06 +01:00
David Bauer
665cc49d67
ar71xx: add support for Archer C7 v5
2018-10-15 00:38:18 +02:00
David Bauer
246a617d71
ar71xx: add support for TL-WR902AC v1 ( #1546 )
...
This adds support for the TP-Link TL-WR902Ac v1 travel router.
The device is marked as broken due to 64MB which might be insufficient
in certain environments.
2018-10-11 03:21:51 +02:00
Andreas Ziegler
78ed75ee28
Revert "gluon-core: make sure dns traffic leaves the correct interface when there is ipv6 wan uplink"
...
This reverts commit b3d7011130
2018-08-03 15:04:26 +02:00
Christof Schulze
b3d7011130
gluon-core: make sure dns traffic leaves the correct interface when there is ipv6 wan uplink
2018-08-02 00:58:51 +02:00
Sven Eckelmann
b9ec173ffb
ipq40xx: add support for OpenMesh A62
...
This device is a dual 5GHz device. It is recommended to manually change the
radio of the first device to the lower 5GHz channels and the second radio
to the upper 5GHz channels.
2018-07-25 22:27:16 +02:00
Sven Eckelmann
36a5604dfe
ipq40xx: add support for OpenMesh A42
2018-07-25 22:27:16 +02:00
Matthias Schiffer
fd10d7cbb0
gluon-core: replace nixio with luaposix and luabitops
2018-07-17 20:08:15 +02:00
David Bauer
c4b1febd31
ipq40xx: add target
...
This commit adds support for the new ipq40xx target.
2018-07-16 01:39:36 +02:00
Matthias Schiffer
7e4bfee3c9
gluon-core: upgrade: remove unused variables
2018-07-14 13:35:28 +02:00
David Bauer
52bc028e6b
ar71xx: add support for OCEDO Koala ( #1475 )
2018-07-13 01:25:58 +02:00
Matthias Schiffer
210d97c53e
Switch to OpenWrt 18.06 branch
2018-07-10 22:57:40 +02:00
Sven Eckelmann
ef819cc196
ar71xx: add support for OpenMesh OM2P(-HS)v4 ( #1426 )
2018-06-09 13:55:38 +02:00
Sven Eckelmann
9d719a2e57
ar71xx: add support for OpenMesh A40/A60 ( #1424 )
2018-06-08 20:18:30 +02:00
Matthias Schiffer
1f7ed28b76
gluon-core: set VXLAN/legacy mode in site config
...
In multidomain setups, VXLAN is enabled by default, but can be disabled in
domain configs using the mesh/vxlan option. In single domain setups, the
mesh/vxlan option is mandatory.
The UCI option for legacy mode is removed.
Fixes #1364
2018-04-27 18:05:50 +02:00
Matthias Schiffer
543eb17882
gluon-core: remove DNS cache feature
...
dnsmasq's caching is severly broken and does not handle all answer records
equally. In particular, its cached answers are missing DNSKEY and DS
records, breaking DNSSEC validation on clients.
Remove the cache for now. It may return if dnsmasq is fixed or we switch to
a different resolver.
2018-04-13 15:15:40 +02:00
Matthias Schiffer
25b32ec2fe
treewide: move sysctl settings to /etc/sysctl.d
...
net.ipv6.conf.br-client.forwarding is moved from gluon-client-bridge to
gluon-mesh-batman-adv, as the setting is not useful with non-bridged
protocols.
2018-04-13 14:41:01 +02:00
Matthias Schiffer
9f86bf3155
gluon-core: add default_hostname helper
2018-03-17 11:44:33 +01:00
Christof Schulze
9711afaf69
gluon-core: allow multiple domain names for next_node-feature
...
* change type of next_node.name
* create domain entry for each entry and add to dnsmasq configuration
[Matthias Schiffer: reword documentation]
2018-02-16 15:15:31 +01:00
Martin Weinelt
427c83754b
gluon-core: 200-wireless: upgrade 11ac radios to VHT20 ( #1328 )
...
Patch originally authored by @oleeander.
Fixes #424
2018-02-15 20:29:19 +01:00
Matthias Schiffer
d61f6a1e85
gluon-core: rename iterate_radios() to foreach_radio(), pass whole radio section
...
Allows to remove some redundant UCI lookups.
2018-02-15 14:04:37 +01:00
Karsten
f69fbf7d05
gluon-core: don't disable legacy mesh on mesh_lan on reconfigure ( #1323 )
...
Fixes #1322
2018-02-07 07:33:25 +01:00
Matthias Schiffer
c479d9160d
gluon-core: don't request a prefix via DHCPv6 on WAN
...
The prefix is not used, and requesting it leads to odhcp6c log spam with
certain DHCPv6 servers.
2018-02-03 03:02:56 +01:00
Matthias Schiffer
09c2e60cd4
gluon-core: upgrade/110-network: fix formatting
2018-02-03 03:02:20 +01:00
Matthias Schiffer
a2f45d0d32
gluon-core: store default domain in UCI
2018-01-26 12:32:46 +01:00
Matthias Schiffer
e54b37d835
gluon-core: firewall: move VXLAN rules to the top
...
Evaluating these rules before all the ICMPv6 rules improves wired mesh
throughput measurably.
2018-01-24 22:41:29 +01:00
Matthias Schiffer
2950cc3f59
gluon-core: only use a bridge for wired meshing when necessary
...
On most devices, there is only a single LAN interface connected to all LAN
ports, so no bridge is necessary.
2018-01-24 22:16:09 +01:00
Matthias Schiffer
01336f70ec
gluon-core: firewall: make the default input policy REJECT
...
Fixes #1311
2018-01-17 09:51:10 +01:00
Matthias Schiffer
a32fddf38c
gluon-core: firewall: accept inbound VXLAN traffic on wired mesh interfaces
...
Fixes #1308
2018-01-17 09:51:10 +01:00
David Bauer
99b02701cc
ar71xx: add support for TP-Link Archer C58/C59/C60 ( #1281 )
2018-01-16 18:51:12 +01:00
Matthias Schiffer
18b9174d03
Use 'disabled' attribute instead of 'auto' to disable wired mesh interfaces
...
The 'auto' attribute still allows enabling the interface using ifup, which
is not intended when wired mesh is disabled.
2018-01-11 23:06:36 +01:00
David Bauer
9273e56c63
ar71xx: add support for TP-Link Archer C7 v4 ( #1289 )
2018-01-03 16:50:23 +01:00
Matthias Schiffer
2b1ffb3034
gluon-core, gluon-client-bridge: create local_client zone in core
...
As core defines basic rules for this zone, it makes sense to create it
there.
2017-12-27 02:43:34 +01:00
Matthias Schiffer
8ea5810bda
gluon-core: firewall: allow inbound ICMPv4 ping on local_node
2017-12-27 02:43:34 +01:00
Matthias Schiffer
39284f00d0
gluon-core: firewall: allow Multicast Listener Discovery on mesh/local_client
...
Based-on-patch-by: Christof Schulze <christof.schulze@gmx.net>
2017-12-27 02:43:33 +01:00
Matthias Schiffer
a252383918
gluon-core: firewall: remove redundant ICMPv6 output rules
...
OUTPUT is always accepted, no need to allow ICMPv6 explicitly.
2017-12-27 02:43:33 +01:00
Matthias Schiffer
fe2048e4df
gluon-core: firewall: coding style
...
Wrap long lines.
2017-12-27 02:43:33 +01:00
Christof Schulze
1c1c9f8fc7
gluon-core: firewall rework, make base policy more restrictive
...
* gluon-core, gluon-client-bridge: introduce new firewall zone: local_client
* gluon-core: put clients in local_client zone, introduce drop-zone,
set dns-rules and zones
* gluon-respondd: allow respondd on mesh
* gluon-status-page-api: allow http input on mesh and client
2017-11-25 23:19:08 +01:00
Matthias Schiffer
ee6afaced9
treewide: use new gluon.site Lua library
...
Some files have received some additional refactoring.
2017-08-11 22:07:34 +02:00
Matthias Schiffer
8a41ed05f1
gluon-core: more coding style fixes
2017-08-11 20:28:59 +02:00
kb-light
90305761ce
gluon-core: update lib/gluon/upgrade/150-poe-passthrough for naming within lede
2017-08-11 20:27:51 +02:00
kb-light
949f4b7dd5
gluon-core: lib/gluon/upgrade/150-poe-passthrough: fix indentation
2017-08-11 20:26:08 +02:00
Matthias Schiffer
3df9fcecb0
gluon-core: explicitly disable radios without configuration in site.conf
2017-08-08 14:08:35 +02:00
Matthias Schiffer
293a45456b
gluon-core, gluon-client-bridge: use new gluon.site library in gluon.util
...
In particular, this affects users of gluon.util.iterate_radios.
2017-08-08 14:07:09 +02:00
Matthias Schiffer
1d6e6726d7
gluon-core: use new gluon.site library to avoid 'or {}' syntax
2017-08-08 13:53:02 +02:00
