e130b6f54d0f simple-tc: increment PKG_VERSION
89260206971f libbabelhelper: bump version to allow specifying the command for readbabeldata()
0447a6960caf bump mmfd: Bugfix Crash and firends
mac_to_ip() calculates an ipv6 address from a mac address according to
RFC 4291. For wireguard we have to use specially crafted addresses that
must be unique. This allows calculating such unique mac-based addresses
by allowing to optionally specifying the bytes to be inserted into the
address.
The new routing_algo site.conf value BATMAN_IV_LEGACY is introduced. With
these changes, the routing_algo setting becomes mandatory.
Signed-off-by: Linus Lüssing <linus.luessing@c0d3.blue>
We cannot add the same file (here: /lib/gluon/mesh-batman-adv/compat) to
two, installed packages. Therefore, instead of determining the compat
version number from this file, infer it from the batman-adv release
version number instead.
Signed-off-by: Linus Lüssing <linus.luessing@c0d3.blue>
Instead of unconditionally loading this module on boot the gluon_bat0
netifd protocol script will later take care of loading either the
batman-adv or batman-adv-legacy module, depending on the configured routing
algorithm in UCI.
This displays the branch, repo and commitID that was attempted to update to but
failed. Users then can compare this output to the configuration they meant to
activate in modules and hopefully better find their typos.
This is a fix for the broken ingress traffic-shaping in gluon v2018.2.2
and possibly earlier.
For ingress traffic shaping the kernel option NET_ACT_POLICE is needed.
Before this patch there was no dependency to this. Neither in
gluon_core, gluon-mesh-vpn-core nor in the package.
This patch adds this dependency.
[Matthias Schiffer: move dependency from GLUON_CORE to gluon-mesh-vpn-core]
Fixes#1790
This reverts commit fb08e10494.
Devices featuring ath10k radios should at least 128 MB of memory
as their driver is quite memory hungry.
Devices with a configuration (1x ath10k, 64M memory) like this have
often been seen as running out of memory.
package/gluon-web-network/luasrc/lib/gluon/config-mode/model/admin/network.lua:122:16: (W431) shadowing upvalue f on line 19
Fixes: bab4af01e ("gluon-web-network: improve PoE GPIO name translation
handling")
The profile for GL.iNet AR750 currently selects ATH10K_PACKAGES, but this device actually has a QCA9887 which needs another driver.
This commit fixes the issue by setting ATH10K_PACKAGES_QCA9887 instead.
fb15946 Merge pull request #233 from jluebbe/simple-tc
17e2535 simple-tc: fix confusing program names in error messages
63e6e0d mmfd: split package into mmfd and gluon-mmfd, bump mmfd version
9c0ac53 bump mmfd: remove babel dependency
aae659d bump l3roamd version
32c9f65 lua-simple-uci: luacheck fixes
cf0619a lua-simple-uci: do not use module(), do not rely on UCI internals
9d26ec1 pretty-hostname: do not use module()
fccb564 l3roamd: bump version for Allow to run l3roamd without mesh interfaces
fbcd1b3 l3roamd: bump version for FIX when roaming within the first 4.5 seconds
71d0566 autoupdater: clarify usage of -n in help
1eeea30fd softethervpn: Fix compilation under 64-bit targets
276b7d9b0 Merge pull request #9542 from jefferyto/python-musl-find_library-openwrt-18.06
e1cb7f98d opendkim: Fix compilation with uClibc-ng
bc8fc4fb7 tvheadend: Fix compilation on GCC8
4c1252e9d tvheadend: Fix compilation without deprecated OpenSSL 1.0.2 APIs
bd96e95e3 tvheadend: Fix compilation without OpenSSL deprecated APIs
59f7eb5e1 libartnet: Fix compilation with GCC8
e00521bc7 poco: Do not build on ARC
0662e833e flent-tools: Fix compilation with uClibc-ng
131c9436c oath-toolkit: Fix compilation with uClibc-ng
0524f21ed flashrom: Add ARC support
8923eecd3 elektra: Fix compilation with uClibc-ng
24ad87702 elektra: Fix compilation without deprecated OpenSSL APIs
f30898d3e hfsprogs: Fix compilation with uClibc-ng
02d64a922 dosfsutils: Properly fix iconv linking
f273581e1 dosfstools: Fix compilation with full NLS
4870eab08 loudmouth: Fix compilation with uClibc-ng
b1adbbe5b loudmouth: Disable debug and fix no deprecated API compilation
30ddc8a15 transmission: Fix compilation under uClibc-ng
0cac0b3eb transmission: add PKGARCH:=all for transmission-web
c2860ce2c transmission: Add LTO support to shave off 35KB off of the ipk
b5957aed6 transmission: Allow user to configure web ui home directory
cdc001736 open2300: Switch to GitHub fork
dddcd5d90 softethervpn: Add openssl to host build deps
0a4f88e56 softethervpn: Really fix iconv support
e05f50c12 softethervpn: add package name to build dir
8358aa690 softethervpn: cleanup host/build, pass HOST_*FLAGS
5cb4c348a python,python3: Fix ctypes.util.find_library()
d16a931db python: add patch for CVE-2018-20852
2402c223d python: bump to version 2.7.16
ae21f4990 python3: update to version 3.6.9
12c96eaad diffutils: provide diff, cmp as alternatives
04c9e6708 Merge pull request #9463 from ps790/patch-4
4265311c1 Merge pull request #9461 from ps790/patch-2
93e7b0982 coreutils: add alternatives support
ef44ef698 bridge-utils: fix conflict with busybox brctl
4e93f455a softethervpn: Update to rtm version 4.29-9680
4682d1741 softethervpn: Pass FLAGS to CC for hamcorebuilder
f424f7dfa wifidog: fix getting ip from interface, cleanup
bba8e2c44 irssi: update to version 1.2.1 (security fix)
d10ac7c29 Merge pull request #9396 from stangri/openwrt-18.06-simple-adblock
78b0da469 simple-adblock: options to filter non-ASCII domains, local compressed storage
1e398bbcb ocserv: updated to 0.12.4
43bfa6fe4 Merge pull request #9292 from BKPepe/18.06-youtube
68461c4c5 php7: update to 7.2.19
f9b20e9dd php7: update to 7.2.18
5779614d2 znc: backport fix for CVE-2019-12816
63c532a71 youtube-dl: update to version 2019.06.21
7879bbdb4 Revert "php7: Fix compilation without deprecated OpenSSL APIs"
115f72fc4 Revert "php7: update to 7.2.18"
70e4af441 Revert "php7: update to 7.2.19"
d90a035c1 libxml2: update to 2.9.9
5aa670ed3 libxml2: Fix CVE-2018-14404
8abaf8a30 php7: update to 7.2.19
8e9429f3e php7: update to 7.2.18
a176ffa0a php7: Fix compilation without deprecated OpenSSL APIs
53742f130 php7: update to 7.2.17
81a8e5904 nano: update to 4.3
dd927adce Merge pull request #9272 from gladiac1337/openwrt-18.06
28007a8bd Merge pull request #9268 from EricLuehrsen/unbound_192_1806
1784615d3 haproxy: Update HAProxy to v1.8.20
88a7f98bd unbound: update to 1.9.2 with package bug fixes
7290c123d Merge pull request #9232 from neheb/13
356bb1162 haproxy: Remove unnecessary OpenSSL depends All of these are either not needed or not valid.
3afd61982 lm-sensors: install libsensors using CP instead of INSTALL_DATA
d8ecf9cb7 boost: Release update with minor fix
efa0b885a znc: update my email address
45e1b91ae Merge pull request #9193 from ryzhovau/getdns_lib-18.06
55e357b66 getdns: fix library double packing
810f22da8 nlbwmon: update to latest Git HEAD
The gluon-authorized-keys is usually installed to use SSH keys to
authenticate a user against the device. To make this useful, it is also
required to disable passwordless SSH access to the device.
This new dependency is only required when the user doesn't have
gluon-setup-mode enabled already.
Fixes: #1777
Reported-by: yanosz <github@yanosz.net>
Fixes: a753fa79e3 ("gluon-authorized-keys: add keys from site.conf")
Signed-off-by: Sven Eckelmann <sven@narfation.org>
$(TOPDIR) does not contain a trailing slash.
Thus the 'gluon.mk'-include must include
the trailing slash. (Just like the link to
$(INCLUDE_DIR)/package.mk does.)
Signed-off-by: Chris Fiege <chris@tinyhost.de>
This MR includs only the VPN MODE of the hoodselector whitch simply set
hoods base on their geopositions.
Signed-off-by: Jan-Tarek Butt <tarek@ring0.de>
check_site.lua: fix language syntax
muss -> must
rage -> range
at lease -> at least
coordiantes -> coordinates
realaise -> realised
gluon-hoodselector: fix language syntax in hoodselector
can not -> can't
routers -> router's
continure -> continue
to next -> to the next
TMP -> temporary
for current -> for the current
continure -> continue
with next -> with the next
thier -> there
provides -> provide
possition -> position
therfore -> therefore
gluon-hoodselector: fix language syntax in util.lua
realaise -> realised
gluon-hoodselector: fix language syntax and use autoupdate lock mechanism.
gluon-hoodselector: fix spelling/grammar
gluon-hoodselector: automatically set SECTION and CATEGORY for Gluon packages
gluon-hoodselector-add-VPN-MODE: add micrond & libjson-c dependency
gluon-hoodselector-add-VPN-MODE: check running hoodselector before loading lua
gluon-hoodselector-add-VPN-MODE: remove nixio dependency from hoodselector util
Revert "gluon-hoodselector-add-VPN-MODE: check running hoodselector before loading lua"
This reverts commit 535b0a1b2fb73e563bf6a44b568a796440bd307f.
add luaposix and luabitop to pakage dependency
sbin/hoodselector: remove nixio requiemend
sbin/hoodselector: load hoods only if necessary
gluon-hoodselector: use VPN abstraction layer. the hoodselectore does
not need to know about all individual VPN protocols.
gluon-hoodselector: Makefile add gluon-mesh-vpn-core as dependency
gluon-hoodselector: apply changes of mesh vpn lib
gluon-hoodselector: remove outdated comments
package/gluon-hoodselector: check_site.lua rm domain seed check thus its already checked by gluon-core
package/gluon-hoodselector: util.lua code cleanup and refactoring
package/gluon-hoodselector: hoodselector code cleanup and refactoring
gluon-hoodselector: util.lua, use taps instead of spaces. Use posix.unistd.access instead of io.open
Signed-off-by: Jan-Tarek Butt <tarek@ring0.de>
gluon-hoodselector: hoodselector, use taps instead of spaces.
Signed-off-by: Jan-Tarek Butt <tarek@ring0.de>
gluon-hoodselector: check_site.lua: replace hood with domain
Signed-off-by: Jan-Tarek Butt <tarek@ring0.de>
gluon-hoodselector: drop VPN mode and rename hood to domain. Furthermore implement geolocator mode as neorayder way
Signed-off-by: Jan-Tarek Butt <tarek@ring0.de>
package/gluon-hoodselector: rm duplicated print output
Signed-off-by: Jan-Tarek Butt <tarek@ring0.de>
package/gluon-hoodselector util: fix wrong function signature
Signed-off-by: Jan-Tarek Butt <tarek@ring0.de>
small typo fixes
small typo fixes
Update util.lua
processes are really restarted now. new (old) problem: nodes will not forget their former ipv6-addresses. watchdog could here with that.
gluon-hoodselector util.lua: replace i iterator with _
Signed-off-by: Jan-Tarek Butt <tarek@ring0.de>
Update util.lua
now polygons with holes are recognized correctly. also a mix of nested polygons and boxes should be possible as shapes[]
package/gluon-hoodselector: hoodselector use gluon-reload for daemon restarts/reloads
Signed-off-by: Jan-Tarek Butt <tarek@ring0.de>
package/gluon-hoodselector: util.lua use math-polygon lib and rm restart_services function. Rectengles will be converted into polygons now
Signed-off-by: Jan-Tarek Butt <tarek@ring0.de>
package/gluon-hoodselector: Makefile rewrite description update depends list
Signed-off-by: Jan-Tarek Butt <tarek@ring0.de>
package/gluon-hoodselector: check_site.lua reduce complexity
Signed-off-by: Jan-Tarek Butt <tarek@ring0.de>
package/gluon-hoodselector: use : for gluon_version Val
Signed-off-by: Jan-Tarek Butt <tarek@ring0.de>
package/gluon-hoodselector: fix if equal syntax
Signed-off-by: Jan-Tarek Butt <tarek@ring0.de>
luasrc/usr/lib/lua/hoodselector/util.lua: check_site.lua simplify checksite script and fix if logic
Signed-off-by: Jan-Tarek Butt <tarek@ring0.de>
package/gluon-hoodselector: set space after comma, rm unnecessary error handling
Signed-off-by: Jan-Tarek Butt <tarek@ring0.de>
package/gluon-hoodselector: use only brackes on require function no mixup
Signed-off-by: Jan-Tarek Butt <tarek@ring0.de>
package/gluon-hoodselector: check_site.lua rm unuse variables and fix non std global function
Signed-off-by: Jan-Tarek Butt <tarek@ring0.de>
package/gluon-hoodselector: util.lua rm unuse include
Signed-off-by: Jan-Tarek Butt <tarek@ring0.de>
package/gluon-hoodselector: rm comment return nil in function get_geolocation()
Signed-off-by: Jan-Tarek Butt <tarek@ring0.de>
package/gluon-hoodselector: Makefile refactor pkg description
Signed-off-by: Jan-Tarek Butt <tarek@ring0.de>
