nils/gluon
1
0
Fork 0
Code Issues Pull Requests Packages Projects Releases Wiki Activity
4,451 Commits 26 Branches 63 Tags 18 MiB
3c0f8596f0
Commit Graph

344 Commits

Author SHA1 Message Date
David Lutz
ef39158ed1
ar71xx-generic: add Support for TP-LINK TL-WR940N v4 2016-12-13 01:31:43 +01:00
Matthias Schiffer
77c649e296
ar71xx-generic: update support list for CPE210/510/... 
Fixes #975
 2016-12-11 18:03:04 +01:00
Matthias Schiffer
1677b62e4b
ar71xx: fix LEDs for TL-WA801ND v3, remove BROKEN 2016-12-06 19:01:46 +01:00
Matthias Schiffer
28e697c448
ar71xx: fix sysupgrade on TL-WR801ND v3 2016-12-06 16:20:09 +01:00
Sven Eckelmann
eed79bc37c openwrt: Remove extra soc check in ath79_gpio_output_select (#965) 
The  assignment of the gpio_count and reg_base in ath79_gpio_output_select
takes care that only supported platforms can use ath79_gpio_output_select.
But the rebase of the patches after the last OpenWrt base update
accidentally added an extra check for the SoC which was missing support
soc_is_qca955x().

Boots on QCA955X devices which were using ath79_gpio_output_select stopped
with

    Kernel bug detected[#1]:
    [...]
    Call Trace:
    [<803e6174>] ath79_gpio_output_select+0x30/0xe8
    [<803ed590>] om5p_acv2_setup+0x24/0x200
    [<803e4dc0>] ath79_setup+0x28/0x38
    [<80069ac8>] do_one_initcall+0x148/0x1ec
    [<803e2cc4>] kernel_init_freeable+0x150/0x208
    [<80065218>] kernel_init+0x10/0x114
    [<80060878>] ret_from_kernel_thread+0x14/0x1c

Fixes: a22c1d5670 ("Update OpenWrt base")
Signed-off-by: Sven Eckelmann <sven@narfation.org>
 2016-12-05 10:42:40 +01:00
Matthias Schiffer
6ebf7120df
ar71xx: fix syntax error in /lib/ar71xx.sh 
Fixes: 212c38f0 "ar71xx: add model detection for UBNT Rocket Ti"
 2016-11-29 20:01:54 +01:00
Matthias Schiffer
78ccfaa58d
Update OpenWrt patches 2016-11-29 19:15:28 +01:00
Neal Oakey
212c38f074 ar71xx: add model detection for UBNT Rocket Ti (#943) 2016-11-29 15:33:19 +01:00
Sven Eckelmann
3d9a3f35be kernel: add at803x workaround for sgmii mode (#949) 
Some (possibly broken) bootloaders incorrectly initialize the at8033 phy.
This breaks auto-negotation on these SGMII devices. The mode has therefore
to be set back in to a valid configuration by Linux.

Fixes #911
 2016-11-29 15:29:19 +01:00
Matthias Schiffer
9279fe4b3b
ar71xx, ramips: reduce CPU load and flickering on devices using rsslieds 
Fixes #897
 2016-11-16 01:55:04 +01:00
Matthias Schiffer
0e85726a0a
ath9k: fix ath9k_hw_gpio_get() to return 0 or 1 on success 
Fixes the Ubiquiti UAP Outdoor+ HSR.
 2016-11-15 19:29:29 +01:00
Matthias Schiffer
de2551d435
Fix OpenWrt patch numbering 2016-11-14 22:38:58 +01:00
Andreas Ziegler
6107f215d2 x86: add mmc drivers to generic and 64 subtargets 2016-11-14 22:38:17 +01:00
Andreas Ziegler
aa61a5d489 x86-64: add pata drivers 2016-11-14 22:38:17 +01:00
Matthias Schiffer
5ef3d883a5
ar71xx-generic: backport region code support for TP-Link TL-WR841ND v11 2016-11-11 03:45:49 +01:00
Matthias Schiffer
60b4830c51
linux-firmware: switch back to git protocol from https for download 
Using HTTPS breaks the download on Debian Wheezy. The switch was an
unintended side effect of the backport from LEDE.

Also, fix the commit message of the backport patch (mwlwifi is not updated
anymore since the last OpenWrt base upgrade).

Fixes #919
 2016-11-10 03:30:16 +01:00
Matthias Schiffer
233a7a3c5e
ar71xx: fix syntax error in /etc/uci-defaults/01_leds 2016-11-05 04:36:08 +01:00
Matthias Schiffer
095583ba92
Update OpenWrt base 2016-11-02 17:33:54 +01:00
Matthias Schiffer
a606b32b17
ar71xx-generic: set region code for TL-WA901ND v4 and remove BROKEN 
Tested-by: Jannis Pinter <jannis@pinterjann.is>
 2016-10-15 19:11:35 +02:00
Matthias Schiffer
df5f4ad243
ath9k: remove intermediate queueing patch 
The downgraded version of ath9k was reported to cause issues with Windows
clients before. Remove the problematic patch.
 2016-10-13 10:02:11 +02:00
Matthias Schiffer
487922a8d9
Downgrade mac80211 to LEDE 6c2651566cce8f5b3a3d3b976439dee2bac5e07e 
In addition, the temperature compensation support patch is reverted.

It seems that newer mac80211 version are less stable, so we downgrade it
for now.
 2016-10-11 03:38:53 +02:00
Matthias Schiffer
9934d254da
kernel: add fix for CVE-2016-7117 
This probably doesn't affect Gluon as nothing is using recvmmsg, but it's
still a good idea to get this fixed ASAP.
 2016-10-11 02:15:42 +02:00
Matthias Schiffer
e1808451aa
Update OpenWrt base 2016-10-11 02:15:42 +02:00
Matthias Schiffer
82ef6599f8
mac80211: backport ath9k stability fix 2016-09-30 17:23:20 +02:00
Matthias Schiffer
7153fa3615
ath10k-firmware: add ath10k-firmware-qca988x-11s 2016-09-09 03:01:17 +02:00
Matthias Schiffer
183c35401a
mac80211, hostapd, ...: update to LEDE 42f559ed70897a7b74dd3e6293b42e6d2e511eaa 2016-09-07 05:49:54 +02:00
Matthias Schiffer
639c12b8e2
ar71xx-generic: add support for new TP-Link region codes 
Generate flashable images for the Archer C7 v2 with current stock firmware
again.

To set the region code, the GLUON_REGION variable must be set to "us" or
"eu" in site.mk or as a make argument.

Fixes #860
 2016-08-28 21:03:56 +02:00
Matthias Schiffer
1c6256907b
ar71xx-generic: add support for TL-WA801ND v3 (untested) 
Fixes #800
 2016-08-23 00:26:51 +02:00
Matthias Schiffer
b00c1a30c3
dropbear: update to LEDE 277f85c21ae0ede4e15e66cbd801b9fb502531df 
Includes a few security updates and enables Curve25519 support.

Fixes #223
 2016-08-22 19:23:15 +02:00
Matthias Schiffer
61cde569ad
ar71xx: backport fixes for better CPE210/510 support (again) 
This patchset enables the RX LNA for the CPE210/510, improving RX by about
20dB. The profiles for CPE210 and CPE510 is split into two images.

The problematic patch switching the CPE510 to the secondary ART is left
out.
 2016-08-22 18:42:33 +02:00
Matthias Schiffer
98557891da
mac80211, hostapd, iw, ...: update to LEDE 27dffa0b0c53a1a817a9a37d1647c7e70672273f 2016-08-09 04:12:28 +02:00
Matthias Schiffer
284c61d98e
mac80211, hostapd, iw, ...: update to LEDE b2ddfbc1c7b935cf931b4c336969b65947270ce9 2016-07-29 21:43:45 +02:00
Matthias Schiffer
66a7542a01
netifd: update to latest version 2016-07-29 21:30:26 +02:00
Matthias Schiffer
3d3eb24a97
ar71xx-generic: backport a few D-Link DIR-505 A1/A2 patches 
Fixes #658
 2016-07-28 16:33:49 +02:00
Matthias Schiffer
e773f686c9
ar71xx-generic: fix BOARDNAME for UAP AC Lite 
Caused by a broken backport.

Fixes #689
 2016-07-27 05:37:23 +02:00
Matthias Schiffer
fd80c4ea4b
netifd: fix broken download URL 2016-07-27 05:36:21 +02:00
Matthias Schiffer
aae05fe368
netifd: update to latest version from LEDE 2016-07-27 00:54:48 +02:00
Matthias Schiffer
7974284ed6
mac80211: update to LEDE b47f438d98cd4b731d7f4431448dde973eae4739 2016-07-26 01:12:16 +02:00
Matthias Schiffer
1c42aa0e42
libpcap: fix dependency of install-shared-so make target 2016-07-21 18:03:05 +02:00
Florian Klink
b2117fd31b
x86-generic: enable CONFIG_SATA_VIA 2016-07-20 14:44:23 +02:00
Matthias Schiffer
91881f45dc
mac80211: update to LEDE 6c2651566cce8f5b3a3d3b976439dee2bac5e07e 
Also switch to kmod-ath10k-ct, so we can drop our AP+IBSS patch.
 2016-07-19 22:39:24 +02:00
Matthias Schiffer
a4b60a372b
ar71xx-generic: fix TL-WR841N/ND v11 LEDs 
Fixes #812
 2016-07-03 22:28:11 +02:00
Matthias Schiffer
267b9bd018
ar71xx-generic: add support for TP-Link TL-WR842N/ND v3 (untested) 2016-07-03 22:27:38 +02:00
Matthias Schiffer
634997ec87
Add target ramips-mt7621 with model D-Link DIR-860L B1 
Needs more testing, high packet loss at the moment.
 2016-07-03 21:56:32 +02:00
Matthias Schiffer
fd237f6f43
mac80211: update to LEDE 0a0caa2656c8db73518a1783743ede772e3ac40f 2016-07-03 19:22:09 +02:00
Matthias Schiffer
0676f5f394
x86: stop relying on hexdump for image build signature 
Fixes #811
 2016-07-03 19:16:30 +02:00
Matthias Schiffer
f1570cacb0
ramips: add missing patch to spi-nor backport to fix mt7621 support 2016-07-01 13:23:31 +02:00
Sven Eckelmann
fa04fff88d ar71xx-generic: Add support for OpenMesh MR1750v2 
The new MR1750v2 device support is only available in LEDE master. The
relevant patches have to backported to add support for them in Gluon

Signed-off-by: Sven Eckelmann <sven.eckelmann@open-mesh.com>
 2016-06-17 20:04:00 +02:00
Sven Eckelmann
3ccd516971 ar71xx-generic: Add support for OpenMesh OM2P-HSv3 
The new OM2P-HSv3 device support is only available in LEDE master. The
relevant patches have to backported to add support for them in Gluon

Signed-off-by: Sven Eckelmann <sven.eckelmann@open-mesh.com>
 2016-06-17 20:04:00 +02:00
Matthias Schiffer
7a2dd8b3e4
Revert "ar71xx: backport fixes for better CPE210/510 support" 
This reverts commit ffd1f0b3a5.
 2016-06-17 11:21:39 +02:00
Matthias Schiffer
80751d9b6d
kernel: change kmod-crypto-{core,arc4} to builtin 
Another backported upstream change.
 2016-06-16 04:29:22 +02:00
Matthias Schiffer
d7c1c7fffe
kernel: make IPv6 builtin 
Packages in the openwrt-routing master have adjusted to this upstream
change, so we follow. Also saves a bit of space.
 2016-06-16 01:24:43 +02:00
Matthias Schiffer
20e57a1c71
build: backport a few patches for better Make 4.2+ support 2016-06-15 19:32:15 +02:00
Jan Niehusmann
1059a798ef ar71xx: add GL-AR150 support 
Mainly applying a vendor patch from https://github.com/domino-team/OpenWrt-patches

(https://raw.githubusercontent.com/domino-team/OpenWrt-patches/master/AR150%2C%20AR300%2C%20Domino%20-%20CC1505/000-gl-ar150-cc.patch)
 2016-06-15 15:04:04 +02:00
Matthias Schiffer
ffd1f0b3a5
ar71xx: backport fixes for better CPE210/510 support 
This patchset enables the RX LNA for the CPE210/510, improving RX by about
20dB. The profiles for CPE210 and CPE510 is split into two images, so the
CPE510 can use the correct ART offset, improving the TX power by 10dB.

Fixes #796
 2016-06-09 05:53:57 +02:00
Matthias Schiffer
4becc7dbbd
Backport fixes for the WNR2200 2016-05-29 14:28:16 +02:00
Matthias Schiffer
b56b6640e6
mac80211: backport ath9k GPIO support 2016-05-29 13:47:29 +02:00
Matthias Schiffer
59d4b3056f
Update patches 
For some reason, the filenames of the OpenMesh support patches were
truncated.
 2016-05-29 12:00:17 +02:00
Jan-Philipp Litza
f7eda9381f respondd modules: Use proper formatting of doubles 
Most doubles that are delivered via respondd have limited input
precision, but are converted with up to 17 digits of precision. That can
cause ugly blowups like 0.2800000000000001 in the output, which is
avoided by specifying better format strings (like "%.2f" in most cases).
 2016-05-26 17:38:36 +02:00
Sven Eckelmann
69ce123457 ar71xx-generic: Add support for OpenMesh MR1750/OM5P-AC 
The new ath9k/ath10k based devices are only available in OpenWrt trunk. The
relevant patches have to backported to add support for them in Gluon

Signed-off-by: Sven Eckelmann <sven.eckelmann@open-mesh.com>
 2016-05-23 11:15:30 +02:00
Sven Eckelmann
62feb04fe1 ar71xx-generic: Generate OpenMesh sysupgrades in OpenWrt 
The workaround to generate sysupgrade images for OpenMesh devices in gluon
is replaced in LEDE/OpenWrt by a special patch. It is therefore better to
drop the workaround and use the upstream version.

Reported-by: Matthias Schiffer <mschiffer@universe-factory.net>
Signed-off-by: Sven Eckelmann <sven.eckelmann@open-mesh.com>
 2016-05-19 20:59:34 +02:00
Matthias Schiffer
087112a09b
ar71xx-generic: add support for UniFi AC PRO/LITE (LITE untested) 
Also backport some patches improving QCA956x support.
 2016-05-14 00:48:10 +02:00
Matthias Schiffer
c05f28d1a3
mpc85xx-generic: fix flash detection after spi-nor backport 2016-05-11 12:01:57 +02:00
Matthias Schiffer
340df0dbee
Fix build with GCC 6 
Make pkg-config, mkimage and gcc build with GCC 6 as host compiler. Fix
miscompilation of node.

Fixes #755
 2016-05-09 17:09:00 +02:00
Matthias Schiffer
40d087de84
kernel: backport spi-nor driver from 4.4.9 
Fixes #687
 2016-05-07 00:48:34 +02:00
Matthias Schiffer
80d5f5f995
netifd: update and revert problematic patch 
Fixes VLANs with shell protos on top of WLAN devices.

Fixes #754
 2016-05-05 22:23:24 +02:00
Matthias Schiffer
7fd60ac48a Update OpenWrt base 
This also reverts commit 24d8695d8ceeb09d6c84bcd6ee4ffe087c9b386b...
 2016-04-29 17:55:51 +02:00
Matthias Schiffer
8f6cc2dadd ar71xx-generic: add TP-LINK TL-WR841ND v11 support 
Fixes #721
 2016-04-25 18:18:56 +02:00
Matthias Schiffer
10a469bcfc Update OpenWrt base 2016-04-24 11:54:32 +02:00
Matthias Schiffer
7f1c11cf7e Backport parallel download locking support 
Fixes #733
 2016-04-24 09:11:20 +02:00
Matthias Schiffer
b46589a637 xtables-addons: build: fix configure compatiblity with POSIX shells 
Fixes #710.
 2016-04-05 20:59:25 +02:00
Matthias Schiffer
3732c26e95 ar71xx-generic: add support for TP-Link TL-WR710N v2.1 2016-04-02 00:59:19 +02:00
Matthias Schiffer
196722663a ar71xx-generic: backport a few TP-Link model detection and upgrade check patches 2016-04-02 00:54:07 +02:00
Matthias Schiffer
4f051061de Update OpenWrt base 2016-04-01 21:09:29 +02:00
Matthias Schiffer
f4208f2a2b build: support LibreSSL as provider of openssl 
Fixes #709
 2016-03-30 03:01:26 +02:00
Matthias Schiffer
d9ca449ed0 generic: mtd: spi-nor: disable protection for Winbond flash at startup 2016-03-29 22:00:58 +02:00
Matthias Schiffer
d4d9c349a2 Revert "generic: mtd: spi-nor: always disable software protection" 
This reverts commit 1ccd24df77.

This commit probably causes problems with some flash chips:

http://patchwork.ozlabs.org/patch/549173/
http://patchwork.ozlabs.org/patch/553683/
 2016-03-26 14:28:26 +01:00
Matthias Schiffer
1ccd24df77 generic: mtd: spi-nor: always disable software protection 
Fixes unwriteable flash when the bootloader leaves it protected.
 2016-03-26 13:23:13 +01:00
Matthias Schiffer
a26f781404 ar71xx: make bootconsole wait for both THRE and TEMT 
Original commit message:

    MIPS: ath79: make bootconsole wait for both THRE and TEMT

    This makes the ath79 bootconsole behave the same way as the generic 8250
    bootconsole.

    Also waiting for TEMT (transmit buffer is empty) instead of just THRE
    (transmit buffer is not full) ensures that all characters have been
    transmitted before the real serial driver starts reconfiguring the serial
    controller (which would sometimes result in garbage being transmitted.)
    This change does not cause a visible performance loss.

    In addition, this seems to fix a hang observed in certain configurations on
    many AR7xxx/AR9xxx SoCs during autoconfig of the real serial driver.

    A more complete follow-up patch will disable 8250 autoconfig for ath79
    altogether (the serial controller is detected as a 16550A, which is not
    fully compatible with the ath79 serial, and the autoconfig may lead to
    undefined behavior on ath79.)
 2016-03-24 18:34:34 +01:00
Alexander Dahl
d2b74b4cf0 openwrt: add patch fixing sysupgrade on Xen DomU 
Patch tested on v2016.1.x branch with Freifunk Magdeburg firmware on
Debian Jessie amd64 Xen host. See the same patch in our gluon fork here:
https://github.com/FreifunkMD/gluon/blob/fix-sysupgrade-xen/patches/openwrt/0058-x86-fix-platform_export_bootpart-for-Xen-virtual-disks.patch

Sysupgrade was tested successfully by manually making the change before
upgrading in the filesystem of the running node and upgrading to the
fixed FFMD experimental build in config mode via expert settings in
webgui.

Patch also submitted to OpenWRT trunk already.

Signed-off-by: Alexander Dahl <alex@netz39.de>
 2016-03-17 22:12:44 +01:00
Matthias Schiffer
e729d33bab netifd: update to latest git master 2016-03-09 06:47:53 +01:00
Matthias Schiffer
01878f4bbc Backport GPIO control support 
Backport of rr46271 and r46922.

Based-on-patch-by: Julian Kornberger <jk+github@digineo.de>
 2016-03-07 06:08:32 +01:00
Matthias Schiffer
1f06d20705 ath10k: remove hard dependency on ath10k-firmware-qca988x 
We use our own firmware package.
 2016-03-04 17:40:56 +01:00
Matthias Schiffer
6f23ef9eb7 Update OpenWrt base 
We got most of our patches backported by upstream :)
 2016-03-01 12:52:12 +01:00
Matthias Schiffer
ff574cfe65 ar71xx/lzma-loader: fix O32 ABI conformance 
Backport of r48279
 2016-02-28 05:00:50 +01:00
Matthias Schiffer
b6c576645f kernel/gpio_keys: load module on pre-init 
fix rescue mode on wdr4900

Backport of r48793
 2016-02-28 04:41:39 +01:00
Matthias Schiffer
00b620ae51 Update mac80211 backport to r48810 2016-02-28 03:27:49 +01:00
Matthias Schiffer
c9f7a17d3a brcm2708-gpu-fw: move pkg build dir to kernel build dir to fix rebuild bugs after cleaning the kernel tree 
Backport of r48732
 2016-02-28 02:30:34 +01:00
Matthias Schiffer
d2ab156605 Update OpenWrt base 2016-02-28 02:02:56 +01:00
Matthias Schiffer
89b3dca8b5 kernel: disable software protection bits for macronix flash chips at init 
The bootloader of AirOS 5.6.x doesn't remove the flash protection for us,
so we have to do this ourselves.
 2016-02-26 04:39:50 +01:00
Matthias Schiffer
56f1cd5383 firmware-utils: mkfwimage: fix firmware_max_length for XM layout 
This should fix problems with flashing from AirOS 5.6.x.
 2016-02-25 22:50:58 +01:00
Matthias Schiffer
b9161061fa Merge branch 'ubnt-detection' of https://github.com/oakey-dev/gluon 2016-02-25 17:40:36 +01:00
Neal Oakey
a07419bbfe fix UBNT XM model detection 2016-02-14 20:59:49 +01:00
Matthias Schiffer
a40d3cddba mac80211: update backport to r48681 2016-02-09 18:44:22 +01:00
Matthias Schiffer
9a10ad688d build: add support for choosing a different url filename part than the output file 
Backport of r47591 and r48427
 2016-02-09 13:50:22 +01:00
Matthias Schiffer
43ceba8cb9 Update OpenWrt base 2016-02-08 18:41:58 +01:00
Felix Kaechele
d45b2def40 backport: Futro support in x86-generic 
Signed-off-by: Felix Kaechele <felix@kaechele.ca>
 2016-02-08 14:16:11 +01:00
Matthias Schiffer
10f7a88ba9 Backport fix for CVE-2016-0728 (local root exploit) 
We're too close to the release of Gluon 2016.1 to do a full update of our
OpenWrt tree, therefore just make a backport of this.
 2016-02-06 07:39:51 +01:00
Matthias Schiffer
7c67ff0cf1 ath9k: fix HSR tuner support for UniFi Outdoor Plus 
Also remove the BROKEN check as the UniFi Outdoor Plus support seems to
work fine now.

Fixes #272
 2016-01-17 23:17:34 +01:00
Matthias Schiffer
0bd0df6f93 kernel: fs, seq_file: fallback to vmalloc instead of oom kill processes 
Fixes #177
 2016-01-04 10:26:40 +01:00
Matthias Schiffer
97471a1bb7 lua-cjson: add host build support 2016-01-02 23:49:25 +01:00
Matthias Schiffer
289f58d5b9 ar71xx: another fix to wndr3700_board_detect 2016-01-02 23:46:48 +01:00
Matthias Schiffer
3655a5b228 Revert "bzip2: extend/fix the Host/Install rule to install libbz2.so files" 
Fixes #589
 2015-12-08 19:53:21 +01:00
Ranlvor
e73d3c5c52
OpenSSL: Added source/old to PKG_SOURCE_URL 
OpenSSL moves old versions of the library from http://www.openssl.org/source/
to http://www.openssl.org/source/old/1.0.2/ breaking the old links. That
behavior breaks the OpenWRT-build every time OpenSSL releases a new version.

This patch adds http://www.openssl.org/source/old/1.0.2/ to the PKG_SOURCE_URL
of OpenSSL to avoid breaking the build whenever OpenSSL releases a new
version.
 2015-12-06 16:14:51 +01:00
Matthias Schiffer
6110d3d444 acx-mac80211: mark as BROKEN to avoid compile failure on mipsel targets 2015-11-28 22:41:42 +01:00
Matthias Schiffer
fabb0143c4 base-files: add missing public key 
This patch is already included in the current OpenWrt CC branch.
Cherry-pick for now as we're very close to the Gluon 2015.2 release.
 2015-11-21 18:36:45 +01:00
Matthias Schiffer
77829cda98 ar71xx: fix wndr3700_board_detect for some NETGEAR WNDR3700v2 (again) 2015-11-20 15:23:02 +01:00
Matthias Schiffer
3f70440527 ar71xx: fix AR71XX_MODEL on TP-Link TL-WR703N 2015-11-20 00:04:59 +01:00
Matthias Schiffer
ef38d386cb Fix the mac80211 backport not to remove the dependencies on kmod-crypto-arc4 and kmod-crypto-aes 
The trunk version of mac80211 doesn't need these dependencies anymore as
they are compiled into the kernel.

While this didn't cause any issues for Gluon as we always build the kernel
with all modules, this fix makes the patch work on a plain OpenWrt CC as
well.
 2015-11-18 23:07:46 +01:00
Matthias Schiffer
8ef02f33e9 ar71xx: backport ath10k calibration data load changes 2015-11-18 02:03:35 +01:00
Matthias Schiffer
0b77bee3d7 ar71xx: fix TL-WR941ND v6 switch PHY mask 
Fixes #550
 2015-11-08 20:48:17 +01:00
Matthias Schiffer
abd43c163c ar71xx: add support for TP-LINK TL-WR1043ND v3 2015-11-05 18:17:28 +01:00
Matthias Schiffer
a3feff21cf ar71xx: add TP-LINK TL-WR941ND v6 support (again) 2015-11-02 19:26:15 +01:00
Matthias Schiffer
2c6484ca15 mac80211: backport from trunk r47249 + additional patches 2015-11-02 02:58:55 +01:00
Matthias Schiffer
6be3893a7b ipv6: fix crash on ICMPv6 redirects with prohibited/blackholed source 
Fixes #540
 2015-11-02 02:02:37 +01:00
Matthias Schiffer
7475ef8f14 Update OpenWrt base 
Update kernel to 3.18.23
 2015-11-02 00:16:09 +01:00
Matthias Schiffer
3d862afb17 Update OpenWrt base 2015-10-26 19:02:12 +01:00
Matthias Schiffer
fe0fbcf2d5 ar71xx: fix ath79_soc_rev value for QCA9531 ver. 2 
ath9k expects to get revision id 2 for the QCA9531 ver. 2 rev. 0. This
fixes the very low TX power on some devices like the TP-LINK
TL-WR841ND v10.

As ath79_soc_rev is only used to get the revision number to ath9k on the
QCA9533, just set it to the expected value on the ver. 2.
 2015-10-22 13:58:08 +02:00
Matthias Schiffer
162c4b0cdd Update CPE210/510 v1.1 support patches 
Some more cleanup.
 2015-10-16 01:20:16 +02:00
Matthias Schiffer
cad2e8e4b7 ar71xx-generic: add support for CPE210/220/510/520 v1.1 (untested) 2015-10-15 22:03:20 +02:00
A.Kasper
b88c9f7877 kernel: add kernel modules for rtl8150 and rtl8152 based usb-to-ethernet converters 
This patch adds the kernel modules to for the very common Realtek RTL8150 and Realtek 8152 based USB-to-Ethernet converters.
After this patch the following packages can be added to targets (or site.mk):
kmod-usb-net-rtl8150
kmod-usb-net-rtl8152

The modules are already available in openwrt trunk, but not in Chaos Calmer. This patch is just a temporary backport.
The modules are needed for Futros with additional USB-Ethernet-Interface and VMs with dedicated USB-NIC
 2015-10-12 11:56:35 +02:00
Matthias Schiffer
cd751b8b9e Revert "ar71xx: remove WZR-600DHP from Buffalo WZR-HP-AG300H/WZR-600DHP model name string for now" 
This reverts commit 8ad3c88179.
 2015-10-11 20:56:53 +02:00
Matthias Schiffer
8ad3c88179 ar71xx: remove WZR-600DHP from Buffalo WZR-HP-AG300H/WZR-600DHP model name string for now 
We can't use the same image for these two devices, so as a workaround,
remove ZR-600DHP from the name for now, so the autoupdater can work and
users aren't confused.
 2015-10-11 20:30:15 +02:00
Matthias Schiffer
fddbc1df2e base-files: add /etc/profile.d support 2015-10-11 18:14:08 +02:00
Matthias Schiffer
ffc7baf9fb ar71xx: add support for TP-LINK TL-WR841N/ND v10 (untested) 2015-10-11 18:07:05 +02:00
Matthias Schiffer
46f996b4f0 Update modules 
This also takes us past the OpenWrt 15.05 final release.
 2015-09-21 21:02:31 +09:00
Matthias Schiffer
e3d89ee8c4 ath9k: add HSR tuner support for UniFi Outdoor Plus 2015-09-03 23:51:19 +02:00
Matthias Schiffer
f0a6400d5d Refresh OpenWrt patches 2015-09-03 22:03:46 +02:00
Matthias Schiffer
d2909270a7 Merge remote-tracking branch 'origin/odhpc6c-minor-fixes' 2015-09-03 20:59:31 +02:00
Nils Schneider
40a1a3c16c odhcp6c: minor fixes 2015-09-03 18:07:48 +02:00
Matthias Schiffer
501affad08 Revert "mac80211: backport from trunk r46760" 
This reverts commit 91b3c1d371.
 2015-09-03 15:24:51 +02:00
Matthias Schiffer
740e8b67c5 Revert "ar71xx: fix TP-LINK TL-WR941ND v6 support" 
This reverts commit 6da1677d92.
 2015-09-03 15:24:42 +02:00
Matthias Schiffer
6da1677d92 ar71xx: fix TP-LINK TL-WR941ND v6 support 2015-09-01 22:14:57 +02:00
Matthias Schiffer
91b3c1d371 mac80211: backport from trunk r46760 2015-09-01 22:14:57 +02:00
Matthias Schiffer
3dbe4bc80f Update modules 2015-08-28 19:31:41 +02:00
Matthias Schiffer
0f427af474 Avoid build dependency on libopenssl 2015-08-28 10:48:41 +02:00
Matthias Schiffer
a1071bc5d4 Update modules 2015-08-13 20:27:07 +02:00
Matthias Schiffer
4b23674393 base-files: default_postinst: propagate the real postinst return code 
Fixes site.conf checks.
 2015-08-07 18:50:03 +02:00
Matthias Schiffer
be9182d377 Backport some QCA953x fixes 
This might improve stability on the TL-WR841 v9.
 2015-08-06 19:24:37 +02:00
Matthias Schiffer
912ab30d3a Update OpenWrt base 2015-08-06 16:37:23 +02:00
Matthias Schiffer
75cebd236d hostapd: prevent channel switch for 5GHz 
hostapd would switch the primary and secondary channel on 5GHz networks in
certain circumstances, completely breaking the adhoc interfaces of the WLAN
adapter (they would lose their configuration).

As a temporary fix, disable this channel switch function.
 2015-07-27 20:45:33 +02:00
Nils Schneider
03ed475a42 openwrt/mac80211: set mcast-rate for mesh point interfaces 2015-07-24 21:54:41 +02:00
Matthias Schiffer
1195760cb6 ath10k: update Candelatech firmware to v14 2015-07-23 02:27:04 +02:00
Matthias Schiffer
dfcac0aaa5 ar71xx: fix wndr3700_board_detect for some NETGEAR WNDR3700v2 2015-07-23 01:41:25 +02:00
Matthias Schiffer
f6498e8773 Update modules 2015-07-18 18:02:13 +02:00
Matthias Schiffer
303712d4b4 brcm2708: don't use gzip -k 2015-07-17 20:53:19 +02:00
Matthias Schiffer
2eb59ddec0 Add support for sunxi target and BananaPi profile (untested) 2015-07-16 23:07:10 +02:00
Matthias Schiffer
cee83c60c0 brcm2708: add sysupgrade support 2015-07-15 22:06:01 +02:00
Matthias Schiffer
efbc88ddba Update modules 2015-07-10 20:34:11 +02:00
Matthias Schiffer
cb40f149f3 Add support for brcm2708-bcm2708 and -bcm2709 targets 
Original patch by @MPW1412
 2015-07-10 19:38:41 +02:00