Matthias Schiffer
02f2d8796c
gluon-core: don't call 'ip' to check if an interface exists
2017-04-11 02:01:21 +02:00
Matthias Schiffer
c4613c4e8d
gluon-core: gluon.util: pass UCI cursor to get_wlan_mac(), get rid of local UCI context
2017-04-11 01:48:11 +02:00
Matthias Schiffer
f48d10bdde
gluon-core: gluon.util: pass UCI cursor as argument to iterate_radios() instead of using local context
2017-04-11 01:48:11 +02:00
Julian Labus
901b122d83
gluon-web-wifi-config: use find_phy from gluon.util
2017-04-11 01:48:11 +02:00
Julian Labus
734d1925de
gluon-core: gluon.util: fix PHY detection for radios addressed by PCIe address
2017-04-11 01:48:10 +02:00
Matthias Schiffer
da22c5cf8e
gluon-core: gluon.util: change find_phy argument to config table and make public
2017-04-11 01:48:10 +02:00
Matthias Schiffer
6499658b52
gluon-mesh-batman-adv-core: don't print error message when no_rebroadcast is not supported
...
batman-adv 2017.0 doesn't need (or support) no_rebroadcast anymore. Don't
fail when the file doesn't exist.
2017-04-10 01:32:30 +02:00
kb-light
eefd2ef8db
Add package gluon-ebtables-source-filter ( #1015 )
2017-04-09 18:18:51 +02:00
Julian
13c61d9394
gluon-core: fix pattern %v in opkg URLs ( #1087 )
2017-04-07 14:24:13 +02:00
Cyrus
6a0ca58fc3
gluon-core: Fixed bug which kept legacy VLAN interface definitions ( #1085 )
2017-04-03 20:48:42 +02:00
Cyrus
540d0ff0a3
gluon-mesh-vpn-core: Fixed conditions for migration code ( #1080 )
...
VPN daemons were always disabled
2017-03-26 10:26:33 +02:00
Cyrus Fox
aa17e3e86e
gluon-mesh-vpn-tunneldigger: ignore default config when checking for legacy configs
2017-03-23 12:51:41 +01:00
Matthias Schiffer
da19961188
gluon-web: javascript: don't use global RegExp.$x matches, fix "this" for parameterized validators
...
Doing so caused broken validations, as different validators were affecting
each other.
2017-03-10 22:25:00 +01:00
Matthias Schiffer
b016cf18b4
gluon-mesh-vpn-core: add code for migration of enabled state between fastd and tunneldigger
...
Based-on-patch-by: Cyrus Fox <cyrus@lambdacore.de>
2017-03-10 19:45:35 +01:00
Matthias Schiffer
a49ef70c53
gluon-config-mode-mesh-vpn: add tunneldigger support
...
Based-on-patch-by: Cyrus Fox <cyrus@lambdacore.de>
2017-03-10 19:45:34 +01:00
Cyrus Fox
ad7a36fdce
gluon-mesh-vpn-tunneldigger: add package for tunneldigger L2TP support
2017-03-10 19:45:34 +01:00
Matthias Schiffer
be88eba07f
Refactor common parts of gluon-mesh-vpn-fastd into a gluon-mesh-vpn-core package
...
The fastd_mesh_vpn site.conf section is renamed to mesh_vpn.fastd.
2017-03-10 19:45:34 +01:00
Matthias Schiffer
41a9f9b06c
gluon-mesh-batman-adv-core: fix ARP resolution of next-node IPv4 address
...
The ebtables rules were not adjusted when switching from macvlan to veth.
2017-03-08 22:52:25 +01:00
Matthias Schiffer
7222fc07d1
gluon-web-private-wifi: fix default value of "enabled" setting
2017-03-02 15:09:49 +01:00
Matthias Schiffer
8245e77218
gluon-status-page: fix browser compatiblity of language selection
2017-02-26 20:55:31 +01:00
Matthias Schiffer
959c8ae7f8
gluon-status-page: use unique filenames for dependencies, switch to SHA256 checksums
2017-02-26 19:46:33 +01:00
Christof Schulze
b7651ee96f
gluon-core: limit fq_codel memory to 1MB per AP with less than 48MB RAM ( #1046 )
2017-02-24 19:43:32 +01:00
Christof Schulze
946d873c14
gluon-status-page-api: limit uhttp max_requests to 16 on devices with <48MB RAM ( #1045 )
2017-02-24 19:38:40 +01:00
Matthias Schiffer
28f42b24a8
gluon-setup-mode, gluon-status-page-api: remove references to rpcd
...
rpcd is not included in our images anymore since switching to gluon-web, so
we don't need to disable it anymore.
2017-02-24 00:44:03 +01:00
Jan-Tarek Butt
c9f62fc278
gluon-mesh-batman-adv-core: Move lua file into luasrc dir
2017-02-23 20:27:23 +01:00
Matthias Schiffer
b45585a109
Switch LAN and WAN port of Ubiquiti AirGateway
...
This makes the LAN port the PoE master, so the AirGateway can be used to
supply power to another node connected via mesh-on-LAN.
Fixes #608
2017-02-23 19:49:39 +01:00
Matthias Schiffer
f0b919e89c
gluon-client-bridge: add next-node IPv6 address as deprecated
...
We always want to prefer the unique node address for outgoing traffic. Note
that this doesn't have an effect with batman-adv, as usually br-client will
be the outgoing interface, so the unique address would be chosen anyways.
2017-02-23 17:58:44 +01:00
Christof Schulze
b994ad4fdc
gluon-l3roamd: add package containing basic l3roamd configuration ( #1042 )
2017-02-23 15:49:32 +01:00
rubo77
da7f69142f
gluon-config-mode-mesh-vpn: add extra message if mesh-VPN was not selected
...
This was introduced in ffhh-packages at https://github.com/freifunkhamburg/ffhh-packages/tree/master/gluon-config-mode-reboot-ffhh
2017-02-22 19:28:25 +01:00
Matthias Schiffer
f458d788c8
gluon-config-mode-core: make welcome and reboot message optional
...
Make use of our new _translate() function.
2017-02-22 19:28:25 +01:00
Matthias Schiffer
1d7b4482b7
gluon-web: add renderer._translate()
...
_translate() will return nil when no match is found.
2017-02-22 19:28:22 +01:00
Matthias Schiffer
31d3f08f25
treewide: convert all LuCI-based packages to gluon-web
2017-02-22 01:31:25 +01:00
Matthias Schiffer
e4b74be506
gluon-web: add package
...
The gluon-web package is basically a stripped-down and refactored version
of the LuCI base.
2017-02-22 01:30:58 +01:00
Matthias Schiffer
a06541623e
gluon-luci-admin: remove redundant Compound
2017-02-21 20:55:08 +01:00
Matthias Schiffer
78d8645e19
gluon-luci-autoupdater: avoid use of CBI Maps
...
As convenient as the Map is, the underlying code is very complex and will
be removed.
2017-02-21 20:55:08 +01:00
Matthias Schiffer
b5a3b9115b
gluon-luci-admin: get rid of an unneeded model
2017-02-21 20:55:08 +01:00
Matthias Schiffer
90fa69d7dd
gluon-config-mode-core: remove bogus comments from pofiles
2017-02-21 20:55:08 +01:00
kb-light
558e98ae42
gluon-mesh-vpn-fastd: improve check_site
2017-02-21 11:19:44 +01:00
kb-light
c9563cdebd
scripts: check_site_lib: introduce need_string_array_match() ( #1016 )
2017-02-21 09:45:33 +01:00
Andrey Perliev
26a0cbd1cc
gluon-status-page: JS translations ( #1044 )
...
Add translation support to gluon-status-page, including English, German and Russian translations.
2017-02-21 09:40:09 +01:00
Matthias Schiffer
43f32e3c3b
gluon-autoupdater: fix incomplete comment in upgrade script
...
Fixes #1043
2017-02-16 08:46:41 +01:00
Christof Schulze
6a5a7a7131
gluon-mesh-vpn-fastd: do not depend on gluon-mesh-batman-adv ( #1041 )
...
In preparation for Babel support.
2017-02-13 21:00:54 +01:00
Matthias Schiffer
afdae86a5e
gluon-respondd: allow platforminfo_get_model() to return NULL
2017-02-12 06:04:22 +01:00
Christof Schulze
b38bd942b9
gluon-status-page-api: fix indentation of luasrc/lib/gluon/status-page/www/cgi-bin/interfaces
2017-02-11 23:31:28 +01:00
Christof Schulze
8b63ac792a
gluon-statuspage-api: make lib/gluon/status-page/www/cgi-bin/interfaces mesh-protocol agnostic
2017-02-11 23:31:28 +01:00
Christof Schulze
b3e609dca9
gluon-radvd: improve coding style in initscript
2017-02-11 22:40:51 +01:00
Christof Schulze
25f1b64934
gluon-radvd: remove netdev from initscript
...
uradvd will tolerate devices appearing and disappearing during runtime.
2017-02-11 22:40:41 +01:00
Matthias Schiffer
184cb1010d
gluon-core: add single_as_lan option to configure a single ethernet port as LAN instead of WAN
2017-02-10 22:48:23 +01:00
Matthias Schiffer
e39cbcbda1
gluon-core: gluon.util: make exec() replace all stdio files with /dev/null
2017-02-10 22:09:59 +01:00
Matthias Schiffer
ea12cb770d
gluon-core: nicer indentation of /lib/gluon/upgrade/020-interfaces
2017-02-10 22:08:51 +01:00
Matthias Schiffer
e5cb125737
Move wifi24/5 and mesh_on_wan/lan site validators from gluon-mesh-batman-adv-core to gluon-core
...
These values have been in use in gluon-core for some time, the validators
need to be moved as well.
2017-02-10 21:19:34 +01:00
Matthias Schiffer
f238b01173
gluon-client-bridge: use a veth pair instead of macvlan to connect local-node to br-client
...
macvlan interfaces never directly exchange traffic with the underlying
interface, but only with other hosts behind the interface. In consequence,
router advertisements from the uradvd running on br-client could never
reach local-node, preventing it from getting an IPv6 address without RAs
from an external radvd. Fix this be replacing the macvlan interface with
a veth pair (with the peer interface in br-client).
As a side effect, this saves about 5KB of flash, as the veth module is
simpler than macvlan.
2017-02-10 10:21:38 +01:00
Matthias Schiffer
57f8b9bc6a
Switch back roles of br-client and local-node interfaces
...
When preparing the migration from macvlan to veth for local-node, MAC
address conflicts occurred as some ports of br-client had the same address
as local-node. Reverting the roles of both interfaces fixes this.
By default, br-client is left as an interface without addresses and
firewall rules that drop everything, so the bridge is used to connect its
ports only. gluon-mesh-batman-adv-core changes this to the usual set
of addresses and firewall rules.
2017-02-10 09:58:23 +01:00
Matthias Schiffer
b92dfcb966
Move creation of local-node device from gluon-mesh-batman-adv-core to gluon-client-bridge
...
Prepare reverting the roles of br-client and local-node to their state
before 8c4403ba11
2017-02-10 09:42:16 +01:00
Matthias Schiffer
eb350aba34
gluon-client-bridge, gluon-mesh-batman-adv-core: nicer indentation of uci:section calls
...
Also simplify the local_node.peerdns setting.
2017-02-10 08:16:27 +01:00
Matthias Schiffer
f9a52fd54f
Move luci-base dependency from gluon-core to gluon-setup-mode
...
Nothing outside the config mode depends on luci-base anymore.
2017-02-10 02:10:02 +01:00
Matthias Schiffer
5f922cf3ef
gluon-status-page-api: upgrade: don't throw error messages without rpcd
2017-02-10 02:10:02 +01:00
Matthias Schiffer
efb8475f45
build: get rid of some redundant build dependencies
2017-02-10 02:10:01 +01:00
Matthias Schiffer
80de4a69e3
gluon-client-bridge: don't depend on luci.ip
2017-02-10 02:10:01 +01:00
Matthias Schiffer
e665bfe64a
gluon-core: don't depend on luci.ltn12
2017-02-10 02:10:01 +01:00
Matthias Schiffer
c83b5b3cab
treewide: get rid of luci.util outside of config mode/advanced settings
2017-02-10 02:10:01 +01:00
Matthias Schiffer
6cf03bab37
treewide: replace normal uses of luci.model.uci with simple-uci to reduce LuCI dependencies
...
We also make use of the boolean support of simple-uci to make scripts
clearer.
2017-02-10 02:10:01 +01:00
Matthias Schiffer
6f48fc428f
gluon-legacy: remove package
...
The maintenance overhead doesn't justify keeping this old stuff anymore.
2017-02-10 02:10:01 +01:00
Christof Schulze
718758f0e5
gluon-respondd: have respondd join ff05::... in addition to ff02::... ( #1030 )
...
Rework init script to additionally join a ff05::... multicast group on the mesh-wide interface.
2017-02-10 02:03:04 +01:00
Matthias Schiffer
6b62e2fc78
gluon-core: check_site.lua: only accept /64 as prefix6
...
A lot of our code does not actually work with other prefix lengths.
Fixes #1014
2017-01-26 18:59:38 +01:00
Matthias Schiffer
3e7434bca1
Merge pull request #1000 from freifunk-ffm/christf_dns-config
...
Add gluon-dns-config: a package that enables the node to be used as DNS cache
2017-01-25 00:00:29 +01:00
Christof Schulze
8b083d4986
gluon-core: check_site.lua: fix indentation
2017-01-24 23:21:10 +01:00
Christof Schulze
e2e910fb41
gluon-core: add configuration that enables the next_node to be used as dns cache
2017-01-24 23:20:40 +01:00
Matthias Schiffer
01512419f4
gluon-luci-admin: fix firmware upgrade confirmation code
...
Fix an exception breaking the page.
2017-01-21 18:08:53 +01:00
Matthias Schiffer
e7b434ef34
gluon-luci-admin: fix password setting
2017-01-20 17:00:36 +01:00
Matthias Schiffer
0a8e028e8f
gluon-core: upgrade: don't print an error message on systems without opkg
2017-01-19 13:10:57 +01:00
Matthias Schiffer
78b2775eec
Use LEDE as base for Gluon
2017-01-18 17:21:43 +01:00
Matthias Schiffer
04818c170b
package: refactor add_to_set/remove_to_set to get rid of last LuCI patch
2017-01-18 16:28:54 +01:00
Matthias Schiffer
a0efa9f3fd
odhcp6c: update to use upstreamed solution to ignore default lifetime for RDNSS
2017-01-18 16:28:54 +01:00
Matthias Schiffer
7736f53dc4
Update LuCI to master branch
2017-01-18 16:28:48 +01:00
Matthias Schiffer
2dd8a700ca
package: avoid use of GLUONDIR variable
2017-01-17 21:22:58 +01:00
Matthias Schiffer
99471f8d5d
ar71xx-generic: add support for TP-Link WBS210/510 (untested)
...
Closes #844
2017-01-06 12:02:32 +01:00
Christof Schulze
d09351c97c
gluon-luci-portconfig: portconfig.lua: change spaces to tabs ( #998 )
2017-01-02 19:22:05 +01:00
Matthias Schiffer
2ddf77fc81
Merge pull request #990 from freifunk-ffm/christf_get_mesh_interfaces
...
gluon-core: add function to gluon.util that returns all active mesh-devices
2016-12-23 00:56:42 +01:00
Matthias Schiffer
cd4753aaa5
gluon-respondd: add /usr/lib/respondd to provider directories
2016-12-23 00:44:20 +01:00
Christof Schulze
e41e5cb8d9
gluon-core: add get_mesh_devices(uconn) to gluon.util which will return all devices being up and having proto = gluon_mesh
2016-12-21 23:51:48 +01:00
Christof Schulze
0abe350782
gluon-core: replace blanks by tabs in gluon.util
2016-12-21 23:47:03 +01:00
Matthias Schiffer
2796f66fcb
Merge pull request #976 from FreifunkVogtland/batadv-netlink
...
Switch from batman-adv v14/v15 debugfs to netlink
2016-12-13 01:20:27 +01:00
Matthias Schiffer
182c21eddc
gluon-site: convert site.conf to JSON in compile instead of install step
2016-12-11 15:19:09 +01:00
Sven Eckelmann
22946b14b6
gluon-mesh-batman-adv-core: Switch from debugfs to batadv netlink
...
The batadv debugfs requires large memory blocks to write the text debug
tables. This is inefficient for large tables like the global translation
table or the originators table.
The memory requirement can be reduced by using netlink. It copies smaller
packets in a binary format to the userspace program. The respondd module of
gluon-mesh-batman-adv-core can therefore parse larger originator tables
without causing an OOM on systems which are tight on memory.
Signed-off-by: Sven Eckelmann <sven@narfation.org>
2016-12-11 12:03:12 +01:00
Sven Eckelmann
6ac5b9cbc8
gluon-status-page-api: Switch from debugfs to batadv netlink
...
The batadv debugfs requires large memory blocks to write the text debug
tables. This is inefficient for large tables like the global translation
table or the originators table.
The memory requirement can be reduced by using netlink. It copies smaller
packets in a binary format to the userspace program. gluon-status-page-api
can therefore parse larger originator tables without causing an OOM on
systems which are tight on memory.
Signed-off-by: Sven Eckelmann <sven@narfation.org>
2016-12-11 12:03:12 +01:00
Ruben Barkow
ff0ad20752
gluon-config-mode-core: hand over more info to the reboot screen ( #930 )
2016-12-11 03:13:28 +01:00
Matthias Schiffer
9a06a98651
gluon-respondd: add delay to mesh-wide multicast requests
...
Mesh-wide multicast requests are answered with a random delay of up to 10s.
2016-12-11 00:42:41 +01:00
Matthias Schiffer
8c4403ba11
gluon-client-bridge, gluon-mesh-batman-adv-core: switch roles of br-client and local-node interfaces
...
MAC and IP addresses are switched. This makes the gluon-client-bridge
package more useful for different routing protocols that don't need a
unique address on the client bridge.
As a side effect, gluon-radvd is now using the next-node address, which had
been considered before, but was dismissed to avoid having gluon-radvd
depend on gluon-next-node and gluon-mesh-batman-adv. This will be useful
for announcing default routes via gluon-radvd.
One downside is that this introduces a minor dependency on batman-adv in
gluon-respondd: the hotplug script that checked for the client interface
before will now check for local-node. This doesn't really matter: for mesh
protocols without a local-node interface, the check will do nothing (which
makes sense, as there is no interface to bind to for mesh-wide respondd).
2016-12-10 23:43:44 +01:00
Matthias Schiffer
d2373590e0
gluon-core: add support for removing sysctl settings
2016-12-10 23:43:44 +01:00
Matthias Schiffer
3fc9154d1d
gluon-batman-adv-core: merge gluon-next-node into gluon-batman-adv-core
2016-12-10 23:43:44 +01:00
Matthias Schiffer
fb85d96d5e
gluon-next-node: don't require next_node.ip6
...
The next-node interface may be useful with IPv4 only or even just a MAC
address. This prepares merging gluon-next-node into gluon-batman-adv-core.
2016-12-10 23:43:23 +01:00
Jan-Philipp Litza
fcf3abd9c4
gluon-respondd: restart on state change of client iface
...
Because we unconditionally appended `-i br-client` to the command line of
respondd, it wasn't restarted when br-client changed state. Now, we use a
jsonfilter expression on the network.interface dump data, similar to how the
other interface names are generated, and only add the interface to the argument
list if it is up.
2016-12-09 10:43:24 +01:00
Jan-Philipp Litza
d8bb97831b
gluon-respondd: Use procd in initscript and to restart on network changes
2016-12-08 23:30:57 +01:00
Matthias Schiffer
cb86fce29f
gluon-respondd: make setup.d script executable
2016-12-08 23:02:23 +01:00
Christof Schulze
ca57cdfe77
gluon-respondd: make initialisation mesh protocol agnostic ( #946 )
2016-12-08 17:44:29 +01:00
rubo77
2a101ddd56
gluon-core: add dirty flag to gluon-version, add site-version
2016-12-06 20:05:34 +01:00
Matthias Schiffer
b32ed384c7
gluon-mesh-batman-adv-core: respondd: correctly detect lower interface types ( #954 )
...
Fixes #941
2016-12-03 13:22:22 +01:00
Matthias Schiffer
1f3e789463
gluon-next-node: fix ebtables rules without next_node.ip4
2016-11-30 15:27:06 +01:00
Ruben Barkow
34deeac380
gluon-config-mode-geo-location: make the label for altitude definable in the site folder ( #883 )
2016-11-30 13:13:59 +01:00
