Matthias Schiffer
b8820bab61
Properly support devices with only one ethernet interface
2014-01-22 20:44:34 +01:00
Matthias Schiffer
bb4a9fd5af
Fix race condition in dnsmasq config dir handling
2014-01-22 19:52:17 +01:00
Matthias Schiffer
6d5e47eeec
gluon-config-mode: respect switch configuration
2014-01-22 19:45:07 +01:00
Matthias Schiffer
3369802094
gluon-core: sysconfig: don't print error message for unset config
2014-01-22 19:45:07 +01:00
Nils Schneider
c7efde1acf
gluon-luci-admin: reboot.html, remove refresh
...
Don't refresh the reboot page after rebooting the node. It's not going
back to configmode anyway so it'll never reload without user
intervention.
2014-01-22 17:05:42 +01:00
Nils Schneider
8d62f92a4d
gluon-luci-admin: replace overview text
...
This completely replaces the text on the overview page. Consider this a
placeholder until someone writes a better suited version :)
2014-01-22 17:05:42 +01:00
Nils Schneider
dd7934a39a
gluon-luci-admin: remove redundant headings
2014-01-22 17:05:42 +01:00
Nils Schneider
78f5efa7ce
gluon-luci-admin: no logout button in configmode
...
Hide the "logout" button when in configmode.
2014-01-22 17:05:42 +01:00
Nils Schneider
d85214d4c5
gluon-luci-admin: fix indentation
...
Replaces double-spaces with tabs to match surrounding code.
2014-01-22 17:05:42 +01:00
Nils Schneider
efc958fbf8
gluon-luci-admin: disable when not in configmode
...
For security reasons we'd like to disable all HTTP config interfaces
when the node is operating normally. This patch disables gluon-luci-admin
when configmode is not enabled.
2014-01-22 17:05:42 +01:00
Nils Schneider
de22275c60
gluon-config-mode: remove subsection headings
...
Those headings do not convey much information make the wizard less
compact. The help texts will be rewritten to guide the user instead.
2014-01-22 17:01:27 +01:00
Nils Schneider
57f65acaf2
gluon-config-mode: replace inline style with class
...
Replace the inline stylesheet for the public key box on the reboot page
with a CSS class so it can be styled using the theme.
2014-01-22 17:00:58 +01:00
Nils Schneider
b1cc62b680
gluon-config-mode,luci-admin: use gluon-luci-theme
...
This makes gluon-config-mode and gluon-luci-admin depend on
gluon-luci-theme instead of luci-theme-openwrt.
2014-01-22 16:56:54 +01:00
Nils Schneider
40c4659e18
gluon-luci-theme: new theme, still magenta/yellow
...
This is the initial version of our new configmode theme. It's far from
finished but at least configmode looks good. There are lots of
declarations copied from OpenWRT's default theme so most other luci
modules would be somewhat usable when shown using this theme.
2014-01-22 16:56:32 +01:00
Nils Schneider
5e0048ae84
gluon-config-mode: remove 'reset' button
...
The reset button resets the form. I don't think this is needed in a
wizard that simple and might confuse users so I removed it.
2014-01-21 23:42:03 +01:00
Nils Schneider
5b8e044893
gluon-config-mode: fix wizard
...
Due to my previous two commits configmode was broken when either meshvpn
or bandwidth limit was disabled. This fixes it but there may be a
cleaner solution provided by luci.
2014-01-21 22:19:25 +01:00
Nils Schneider
566faeb6ca
gluon-config-mode: bwlimit hidden when not meshvpn
...
Hide the bandwidth limit checkbox when meshvpn is disabled.
2014-01-21 20:02:17 +01:00
Nils Schneider
bb3e93b55d
gluon-config-mode: more compact tc form
...
Hide the downstream/upstream input fields when bandwitdh limiting is
disabled.
2014-01-21 19:50:07 +01:00
Nils Schneider
2f5524fdb4
gluon-autoupdater: Randomize mirror order
...
This way we have a kind of load balancing among the mirrors.
2014-01-21 13:20:50 +01:00
Daniel Ehlers
2062d1fcb6
gluon-luci-autoupdater: Catch up mirror support in gluon-autoupdater
2014-01-21 05:46:10 +01:00
Matthias Schiffer
ff166453d4
gluon-mesh-batman-adv: accept input on wan interface
2014-01-21 05:24:01 +01:00
Matthias Schiffer
f1dae6ca6e
gluon-core: move initial/020-wireless from generate to files
2014-01-21 05:24:01 +01:00
Nils Schneider
c7991c6df4
gluon-autoupdater: add more models to README
...
This adds a list of known models to the readme.
2014-01-21 04:45:56 +01:00
Matthias Schiffer
e03fb9f8eb
gluon-core: add support for NTP server configuration
2014-01-21 04:22:59 +01:00
Matthias Schiffer
e57e88ee6c
gluon-mesh-batman-adv: add DNS support
2014-01-21 03:59:15 +01:00
Matthias Schiffer
1ceb38ac26
gluon-mesh-batman-adv: more initial -> invariant conversions
2014-01-21 03:05:42 +01:00
Matthias Schiffer
1ba10ac018
Add support for custom dnsmasq config and odhcp6c handler scripts
2014-01-21 03:01:12 +01:00
Matthias Schiffer
10d6c1930d
gluon-autoupdater: allow configuring the branch name independently of the UCI config section name
2014-01-21 00:29:55 +01:00
Matthias Schiffer
72e7ae68fa
gluon-autoupdater: adjust example config for mirror support
2014-01-21 00:10:00 +01:00
Daniel Ehlers
27871c0dc3
gluon-autoupdater: Enable list of mirrors for manifest and firmware.
...
Instead of a single url this patch allows to have a list of urls. So in case
of network instability a router can still reach local mesh-cloud server to pull
a update from. In this stage the autoupdater simply tries every mirror until
one passes all tests.
2014-01-20 23:31:15 +01:00
Daniel Ehlers
cb6c025a7f
gluon-autoupdater: Less global variables.
...
This also removes the need for the cleanup function. Instead the cleanup
code is moved in place.
2014-01-20 23:31:15 +01:00
Daniel Ehlers
f0b63da868
gluon-autoupdater: Refactor code.
...
Move building blocks of the update into seperate functions.
2014-01-20 13:26:58 +01:00
Matthias Schiffer
1b924d6265
gluon-core: use gluon release in package version string
2014-01-20 05:07:55 +01:00
Matthias Schiffer
ee4e896fea
gluon-core: use GLUON_RELEASE from environment
2014-01-20 02:35:21 +01:00
Matthias Schiffer
f36f7bcf26
Merge gluon-release into gluon-core
2014-01-20 01:59:10 +01:00
Matthias Schiffer
8f7b59d787
gluon-simple-tc: add missing defaults on every upgrade
2014-01-20 00:06:55 +01:00
Matthias Schiffer
f9cb8a7258
gluon-mesh-batman-adv: move wifi config to invariant
2014-01-20 00:06:55 +01:00
Matthias Schiffer
59c1900e9a
gluon-location: move information to /etc/config/gluon-location
2014-01-20 00:06:55 +01:00
Matthias Schiffer
1dd9a9a8a1
gluon-autoupdater: no need to provide a default config just to delete it in the initial script
2014-01-20 00:06:55 +01:00
Nils Schneider
8e73ff90a0
gluon-autoupdater: typo corrected
2014-01-19 23:19:55 +01:00
Nils Schneider
4fef2e5e11
Merge pull request #7 from FreifunkBremen/master
...
gluon-autoupdater: get random number from /dev/urandom
2014-01-19 13:40:13 -08:00
Jan-Philipp Litza
7cdf3708f0
gluon-autoupdater: get random number from urandom
...
The approach with awk's rand() wasn't really random between across
devices: When srand() was called without arguments, time() was used as
seed, which of course is the same on all devices when the script is
called via cron at HH:00:00.
This patch instead uses /dev/urandom as source of random (we don't need
cryptographically strong random numbers, so urandom is just fine) but
still uses awk for the comparison as busybox's ash cannot deal with
floats in $(())
2014-01-19 22:36:49 +01:00
Matthias Schiffer
086efed428
gluon-alfred: add chosen gateway and load average
2014-01-19 21:44:26 +01:00
Matthias Schiffer
74493b2ba5
gluon-alfred: run every minute
...
The run frequency and exact time affect the alfred announce interval, so we can
just run it every minute to supply alfred with the most up-to-date data.
2014-01-18 21:56:05 +01:00
Matthias Schiffer
8b4474e18f
gluon-mesh-batman-adv: set gateway mode to client
2014-01-18 19:44:02 +01:00
Jan-Philipp Litza
54620d6231
autoupdater: Use awk instead of grep+head+tail to split manifest
2014-01-17 16:09:34 +01:00
Matthias Schiffer
4ca8a35fc9
gluon-mesh-batman-adv: set bat0 MAC address to primary address
2014-01-16 23:57:42 +01:00
Jan-Philipp Litza
4b61062636
alfred: add more traffic statistics
...
+ mgmt and forward counters
+ packet in addition to byte counters for everything
2014-01-16 23:47:41 +01:00
Jan-Philipp Litza
7fdd0300b2
alfred: Add --no-sleep option to send immediately
2014-01-16 23:46:54 +01:00
Jan-Philipp Litza
692f093d21
alfred: clean up delay code
2014-01-16 22:42:02 +01:00
Jan-Philipp Litza
cc2ef851c7
alfred: add random node-specific delay before sending
2014-01-16 22:36:09 +01:00
Jan-Philipp Litza
50782f759e
alfred: make traffic counters absolute
...
After a lenghty discussion, we settled on absolute vs. relative values.
Main reasons:
* stateless implementation on node possible
* convertable to relative values by differentiaion on receiver
* missed transmissions only decrease granularity, whereas relative
values would introduce wrong numbers on integration if values are
missed
2014-01-16 22:34:57 +01:00
Jan-Philipp Litza
6bf44622dc
alfred: add statistics (uptime+traffic)
2014-01-16 16:50:25 +01:00
Matthias Schiffer
72b27ea2e0
gluon-mesh-vpn-fastd: enable secure handshakes
2014-01-14 19:37:15 +01:00
Matthias Schiffer
1c9dec091e
gluon-radvd: don't run as root
2014-01-14 19:34:07 +01:00
Matthias Schiffer
5241565a79
gluon-mesh-vpn-fastd: don't run as root
2014-01-14 18:46:17 +01:00
Matthias Schiffer
3275c92f72
gluon-core: add function to add users
2014-01-14 18:19:51 +01:00
Matthias Schiffer
f99767fb9f
Add firewall rules
...
gluon-mesh-batman-adv should not be used without firewall to prevent forwarding
of packets from the mesh to the wan interface.
For some reason, the firewall package won't work at all without
kmod-ipt-nathelper.
2014-01-14 01:50:59 +01:00
Matthias Schiffer
1cf4d41cba
gluon-config-mode: use different document root
2014-01-13 20:17:29 +01:00
Matthias Schiffer
d204b0e24f
Remove initscript enable/disable hacks
...
Better configure these properly.
2014-01-13 18:29:00 +01:00
Matthias Schiffer
604e3caceb
gluon-mesh-batman-adv: disable client interface in dnsmasq
2014-01-13 18:02:45 +01:00
Jan-Philipp Litza
a3f2eb6bc7
alfred: name -> hostname
2014-01-13 17:11:41 +01:00
Jan-Philipp Litza
59616e8d77
alfred: improved readability
2014-01-13 17:09:15 +01:00
Jan-Philipp Litza
e901ceda71
alfred: split up firmware info, include fastd version+status
2014-01-13 17:06:47 +01:00
Jan-Philipp Litza
d0e3cbc8bc
alfred: added more information to send, reformatted location
...
location is object with latitude and longitude
added:
* firmware
* autoupdater status
* hardware model
* primary mac address
* mesh IPv6 addresses
2014-01-13 16:10:03 +01:00
Nils Schneider
5f976809a1
gluon-autoupdater: strip trailing - from model
2014-01-13 12:45:55 +01:00
Matthias Schiffer
2e155f9d09
gluon-mesh-vpn-fastd: enable no_rebroadcast on the VPN interface
2014-01-13 01:03:08 +01:00
Matthias Schiffer
d1f01a588f
Clean up gluon-alfred
...
* Merge gluon-alfred-ffmap into gluon-alfred
* Use gluon-crond instead of alfred's "facter" mechanism based on the broken busybox crond
2014-01-12 22:37:28 +01:00
Jan-Philipp Litza
dece1f4122
added gluon-alfred and gluon-alfred-ffmap
2014-01-12 22:06:50 +01:00
Matthias Schiffer
293c64e723
gluon-autoupdater: use the new get_model function
2014-01-12 21:40:19 +01:00
Matthias Schiffer
13e3d7ff79
gluon-core: add sh file to get model name etc.
2014-01-12 21:33:44 +01:00
Nils Schneider
a2329773eb
gluon-autoupdater: improve manifest.sample
...
Makes manifest.sample use the model instead of the board name as that is
what the script actually expects. Also, a sample signature is added.
2014-01-12 21:18:27 +01:00
Nils Schneider
61171c8c25
gluon-autoupdater: remove dead code
...
Recently the autoupdater contained a case statement to distinguish
between TP-Link WDR3600 and TP-Link WDR4300. This was left over from
previous development versions of autoupdater that relied on the board
name instead of the model. It is thus no longer needed and be removed
safely.
2014-01-12 21:18:27 +01:00
Matthias Schiffer
f2c8be9c48
gluon-config-mode: don't depend on haveged
...
Now that haveged starts before the config mode, there is no need to explicity
depend on it; instead it is just used when specified in the site configuration.
2014-01-12 00:50:43 +01:00
Matthias Schiffer
a259e771e9
gluon-core: fixup WAN interface MAC address setting
2014-01-11 21:31:28 +01:00
Matthias Schiffer
a626c9a165
gluon-core: remove left over 'EOF' from config script
2014-01-11 20:34:58 +01:00
Matthias Schiffer
f969e3a2b1
gluon-ebtables-filter-multicast: correct interface name
2014-01-11 19:27:06 +01:00
Matthias Schiffer
1b9c8dcc0b
Don't accept router advertisements by default
2014-01-11 17:43:35 +01:00
Matthias Schiffer
df00835f4c
Add gluon-radvd package
2014-01-11 16:05:17 +01:00
Matthias Schiffer
ccc1330ebb
next-node: rename config sections
2014-01-11 14:23:27 +01:00
Matthias Schiffer
c14f323058
next-node: remove unused include
2014-01-11 14:11:42 +01:00
Matthias Schiffer
bcb6603333
Disable IPv6 forwarding on br-client
...
Disabling forwarding prevents the node from reacting to the Subnet-Router
anycast address.
2014-01-11 14:01:23 +01:00
Matthias Schiffer
0f5190bc6e
Reimplement next-node configuration based on the new netifd version
2014-01-10 22:34:26 +01:00
Matthias Schiffer
f8cdeaefd9
Add ebtables filters from the legacy firmware
2014-01-10 21:49:18 +01:00
Matthias Schiffer
9015c01c34
Allow telnet login in config mode again
2014-01-09 10:06:36 +01:00
Matthias Schiffer
6c952a513a
Add gluon-lock-password package and make config mode depend on it
2014-01-09 09:58:59 +01:00
Matthias Schiffer
1be0a7667f
Make package version depend on the site config version where necessary
2014-01-04 09:19:13 +01:00
Nils Schneider
c03843eac1
gluon-luci-autoupdater: simple luci module for autoupdater
2013-11-28 21:49:34 +01:00
Nils Schneider
0b57802354
configmode -> gluon-config-mode
2013-11-28 20:00:37 +01:00
Nils Schneider
c3fcb81a4b
ssh keys
2013-11-28 20:00:37 +01:00
Nils Schneider
29b480522e
basic admin mode
2013-11-28 20:00:37 +01:00
Nils Schneider
be79b874c5
gluon-config-mode: show hostname on reboot page. fixes #8
2013-11-28 19:16:39 +01:00
Nils Schneider
4fdcc218c5
autoupdater: fix initial upgrade script
2013-11-11 11:45:12 +01:00
Matthias Schiffer
4521362ce3
gluon-core: clean up upgrade main script
2013-10-09 21:56:32 +02:00
Nils Schneider
15aafe47c8
gluon-config-mode: texts from mkm
2013-10-09 21:13:48 +02:00
Matthias Schiffer
3c8d9ed4eb
gluon-simple-tc: add newline to end of example config
2013-10-09 20:35:55 +02:00
Nils Schneider
9b69ac2845
gluon-simple-tc: initial.pl: sort keys before creating config
2013-10-04 10:47:31 +02:00
Nils Schneider
75ac64ca20
gluon-config-mode: simple-tc ifname must be mesh-vpn, not mesh_vpn
2013-10-03 23:26:00 +02:00
Nils Schneider
0d1e3e144b
gluon-config-mode: site.conf: configmode -> config_mode
2013-10-03 23:04:41 +02:00
Nils Schneider
2468154ad1
gluon-config-mode: add simple-tc settings for mesh_vpn
2013-10-03 23:00:47 +02:00
