nils/gluon
1
0
Fork 0
Code Issues Pull Requests Packages Projects Releases Wiki Activity
4,676 Commits 26 Branches 63 Tags 18 MiB
40b1f1b1e2
Commit Graph

461 Commits

Author SHA1 Message Date
Karsten
f69fbf7d05 gluon-core: don't disable legacy mesh on mesh_lan on reconfigure (#1323) 
Fixes #1322
 2018-02-07 07:33:25 +01:00
Matthias Schiffer
c479d9160d
gluon-core: don't request a prefix via DHCPv6 on WAN 
The prefix is not used, and requesting it leads to odhcp6c log spam with
certain DHCPv6 servers.
 2018-02-03 03:02:56 +01:00
Matthias Schiffer
09c2e60cd4
gluon-core: upgrade/110-network: fix formatting 2018-02-03 03:02:20 +01:00
Matthias Schiffer
6ae067cb37
gluon-core: add domain aliases and pretty name 
Based-on-patch-by: lemoer <git@irrelefant.net>
 2018-01-26 12:32:47 +01:00
Matthias Schiffer
a2f45d0d32
gluon-core: store default domain in UCI 2018-01-26 12:32:46 +01:00
Matthias Schiffer
24a085a542
gluon-site: add default domain and check for it 
This does not do anything yet, as this_domain() is not implemented yet.

Based-on-patch-by: lemoer <git@irrelefant.net>
 2018-01-26 12:32:46 +01:00
Matthias Schiffer
7ae8a51126
gluon-core: allow zero VXLAN UDP checksum on RX 
Also disabling TX checksums and not only allowing incoming packets without
checksum will provide another small speedup. As doing so would break wired
meshing with VXLAN-enabled nodes that require non-zero checksums, we will
wait a few days before this step.
 2018-01-24 22:41:29 +01:00
Matthias Schiffer
e54b37d835
gluon-core: firewall: move VXLAN rules to the top 
Evaluating these rules before all the ICMPv6 rules improves wired mesh
throughput measurably.
 2018-01-24 22:41:29 +01:00
Matthias Schiffer
2950cc3f59
gluon-core: only use a bridge for wired meshing when necessary 
On most devices, there is only a single LAN interface connected to all LAN
ports, so no bridge is necessary.
 2018-01-24 22:16:09 +01:00
Matthias Schiffer
7ccdacd294
treewide: rework check_site_lib.lua 
In addition to significant internal differences in check_site_lib.lua (in
particular unifying error handling to a single place for the upcoming
multi-domain support), this changes the way fields are addressed in site
check scripts: rather than providing a string like 'next_node.ip6', the
path is passed as an array {'next_node', 'ip6'}.

Other changes in site check scripts:
* need_array and need_table now pass the full path to the sub fields to the
subcheck instead of the key and value
* Any check referring to a field inside a table implies that all higher
levels must be tables if they exist: a check for {'next_node', 'ip6'} adds
an implicit (optional) check for {'next_node'}, which allows to remove many
explicit checks for such tables
 2018-01-19 10:12:43 +01:00
lemoer
50812b162c
treewide: forbid use of selected site variables in domain specific or site configs 
[Matthias schiffer: rebase, add a few more restrictions]
 2018-01-19 04:05:27 +01:00
lemoer
b520bf5c50
gluon-core: rename site_seed to domain_seed 
[Matthias Schiffer: rebase]
 2018-01-19 03:30:06 +01:00
lemoer
adcd5b7311
gluon-core: add gluon-reconfigure script 
Not useful by itself except for testing; will be used for multi-domain
support.

[Matthias Schiffer: rename script, use for initial configuration]
 2018-01-19 01:10:39 +01:00
lemoer
0f5d932c4f
gluon-core: add util gluon-show-site to print merged site config 
This should not convert JSON to a Lua table and back, as this loses the
distinction between arrays and objects, but as our site.conf is defined in
Lua anyways (for now), this can be fixed in a later revision.

[Matthias Schiffer: rename to gluon-show-site, rebase]
 2018-01-19 01:07:44 +01:00
lemoer
5817170821
gluon-core: introduce "gluon" uci package 
[Matthias Schiffer: change section name and commit message]
 2018-01-19 00:41:25 +01:00
Matthias Schiffer
0b80f1b5ce
gluon-core: reimplement gluon.site module in C 
By basing the Lua gluon.site module on gluonutil_load_site_config(), the
config load implementation needs to changed only in a single place for
multi-domain support.
 2018-01-18 16:29:00 +01:00
Matthias Schiffer
6cf88c3b03
Replace luci-lib-jsonc with our own lua-jsonc 2018-01-18 16:28:59 +01:00
Matthias Schiffer
01336f70ec
gluon-core: firewall: make the default input policy REJECT 
Fixes #1311
 2018-01-17 09:51:10 +01:00
Matthias Schiffer
a32fddf38c
gluon-core: firewall: accept inbound VXLAN traffic on wired mesh interfaces 
Fixes #1308
 2018-01-17 09:51:10 +01:00
David Bauer
99b02701cc ar71xx: add support for TP-Link Archer C58/C59/C60 (#1281) 2018-01-16 18:51:12 +01:00
Matthias Schiffer
18b9174d03
Use 'disabled' attribute instead of 'auto' to disable wired mesh interfaces 
The 'auto' attribute still allows enabling the interface using ifup, which
is not intended when wired mesh is disabled.
 2018-01-11 23:06:36 +01:00
David Bauer
9273e56c63 ar71xx: add support for TP-Link Archer C7 v4 (#1289) 2018-01-03 16:50:23 +01:00
Matthias Schiffer
2b1ffb3034
gluon-core, gluon-client-bridge: create local_client zone in core 
As core defines basic rules for this zone, it makes sense to create it
there.
 2017-12-27 02:43:34 +01:00
Matthias Schiffer
8ea5810bda
gluon-core: firewall: allow inbound ICMPv4 ping on local_node 2017-12-27 02:43:34 +01:00
Matthias Schiffer
39284f00d0
gluon-core: firewall: allow Multicast Listener Discovery on mesh/local_client 
Based-on-patch-by: Christof Schulze <christof.schulze@gmx.net>
 2017-12-27 02:43:33 +01:00
Matthias Schiffer
a252383918
gluon-core: firewall: remove redundant ICMPv6 output rules 
OUTPUT is always accepted, no need to allow ICMPv6 explicitly.
 2017-12-27 02:43:33 +01:00
Matthias Schiffer
fe2048e4df
gluon-core: firewall: coding style 
Wrap long lines.
 2017-12-27 02:43:33 +01:00
Ralf Jung
4bae0a429f docs: dns-cache: explain setting dns.servers a bit more (#1268) 2017-12-27 00:21:08 +01:00
Christof Schulze
1c1c9f8fc7
gluon-core: firewall rework, make base policy more restrictive 
* gluon-core, gluon-client-bridge: introduce new firewall zone: local_client
 * gluon-core: put clients in local_client zone, introduce drop-zone,
   set dns-rules and zones
 * gluon-respondd: allow respondd on mesh
 * gluon-status-page-api: allow http input on mesh and client
 2017-11-25 23:19:08 +01:00
Matthias Schiffer
13b325355d
gluon-core: make old site_config library reference new one, not the other way around 2017-08-11 22:07:35 +02:00
Matthias Schiffer
ee6afaced9
treewide: use new gluon.site Lua library 
Some files have received some additional refactoring.
 2017-08-11 22:07:34 +02:00
Matthias Schiffer
8a41ed05f1
gluon-core: more coding style fixes 2017-08-11 20:28:59 +02:00
kb-light
90305761ce
gluon-core: update lib/gluon/upgrade/150-poe-passthrough for naming within lede 2017-08-11 20:27:51 +02:00
kb-light
949f4b7dd5
gluon-core: lib/gluon/upgrade/150-poe-passthrough: fix indentation 2017-08-11 20:26:08 +02:00
Matthias Schiffer
3df9fcecb0
gluon-core: explicitly disable radios without configuration in site.conf 2017-08-08 14:08:35 +02:00
Matthias Schiffer
293a45456b
gluon-core, gluon-client-bridge: use new gluon.site library in gluon.util 
In particular, this affects users of gluon.util.iterate_radios.
 2017-08-08 14:07:09 +02:00
Matthias Schiffer
1d6e6726d7
gluon-core: use new gluon.site library to avoid 'or {}' syntax 2017-08-08 13:53:02 +02:00
Matthias Schiffer
57adb49de2
gluon-core: add new gluon.site library for convenient access to optional values 
The new gluon.site lua library will eventually replace gluon.site_config
(which is hereby deprecated, but will continue to be supported for a
while).

The new gluon.site library will wrap all values to allow traversing
non-existing tables without errors.

    site = require 'gluon.site'
    c = site.a.b.c -- doesn't fail even if a or a.b don't exist

The wrapped values must be unwrapped using call syntax:

    site_name = site.site_name()

Using the call syntax on a non-existing value will return nil. An
alternative default value may be passed instead:

    mac = site.next_node.mac('16:41:95:40:f7:dc')
 2017-08-08 13:20:38 +02:00
Matthias Schiffer
6884aad788
gluon-core: simplify 820-dns-config code 2017-08-08 04:31:53 +02:00
Matthias Schiffer
31721a61f5
gluonc-core: 200-wireless: remove unneeded nil checks for uci:set_list() 
uci:set_list() will delete the list when nil is passed, so there is no need
to differentiate between the cases.
 2017-08-08 04:31:52 +02:00
Matthias Schiffer
06d0c0f211
gluon-core: fix 200-wireless coding style 2017-08-08 04:31:52 +02:00
Matthias Schiffer
27f35e56b4
gluon-core: add interfaces having proto = gluon_mesh to mesh firewall zone 
Based-on-patch-by: Christof Schulze <christof.schulze@gmx.net>
 2017-06-27 23:49:56 +02:00
Christof Schulze
e432dd4d9f
gluon-core: gluon_mesh.sh: whitespace cleanup 2017-06-27 23:45:58 +02:00
Matthias Schiffer
ae593d8439
gluon-core: convert site seed to lowercase 
While we use the hexadecimal representation as a hash input for simplicity,
it should not be interpreted as case-sensitive.
 2017-06-27 23:28:23 +02:00
Matthias Schiffer
a2711065c8
gluon-core: add VXLAN support for gluon_wired protocol 2017-06-27 23:04:50 +02:00
Matthias Schiffer
0d6f957196
gluon-core: introduce new gluon_wired netifd proto for wired meshing 
The new proto will simplify the switch to VXLAN encapsulation.
 2017-06-27 23:00:17 +02:00
Matthias Schiffer
8bcd0975af
gluon-core: add a "site seed" to site.conf to seed site-specific random values 2017-06-27 23:00:17 +02:00
Matthias Schiffer
acfc3cc1a2
gluon-core: upgrade/210-interface-wan: whitespace cleanup 2017-06-21 17:16:41 +02:00
Matthias Schiffer
0db63008cd
gluon-core: upgrade/220-interface-lan: whitespace cleanup 2017-06-21 02:56:23 +02:00
Linus Lüssing
c519ec4596 gluon-core: reenable multicast snooping for wan zone 
LEDE recently disabled multicast snooping by default:

https://git.lede-project.org/?p=project/netifd.git;a=commitdiff;h=52541140f8138e31958cdc3d7e42a4029fa6bbc9

Reenable it for Gluon as there have been no confirmed issues for
LEDE and no negative reports concerning Gluon v2016.2.x so far.

Closes #1025.

Signed-off-by: Linus Lüssing <linus.luessing@c0d3.blue>
 2017-04-13 22:31:47 +02:00
Matthias Schiffer
a502295eaf
gluon-core: gluon_mesh: make transitive and fixed_mtu available as interface data, add post-setup.d 
In addition, transitive and fixed_mtu now default to 0 instead of an empty string.
 2017-04-12 03:44:45 +02:00
Matthias Schiffer
02f2d8796c
gluon-core: don't call 'ip' to check if an interface exists 2017-04-11 02:01:21 +02:00
Matthias Schiffer
c4613c4e8d
gluon-core: gluon.util: pass UCI cursor to get_wlan_mac(), get rid of local UCI context 2017-04-11 01:48:11 +02:00
Matthias Schiffer
f48d10bdde
gluon-core: gluon.util: pass UCI cursor as argument to iterate_radios() instead of using local context 2017-04-11 01:48:11 +02:00
Julian Labus
734d1925de
gluon-core: gluon.util: fix PHY detection for radios addressed by PCIe address 2017-04-11 01:48:10 +02:00
Matthias Schiffer
da22c5cf8e
gluon-core: gluon.util: change find_phy argument to config table and make public 2017-04-11 01:48:10 +02:00
Julian
13c61d9394 gluon-core: fix pattern %v in opkg URLs (#1087) 2017-04-07 14:24:13 +02:00
Cyrus
6a0ca58fc3 gluon-core: Fixed bug which kept legacy VLAN interface definitions (#1085) 2017-04-03 20:48:42 +02:00
Christof Schulze
b7651ee96f gluon-core: limit fq_codel memory to 1MB per AP with less than 48MB RAM (#1046) 2017-02-24 19:43:32 +01:00
Matthias Schiffer
b45585a109
Switch LAN and WAN port of Ubiquiti AirGateway 
This makes the LAN port the PoE master, so the AirGateway can be used to
supply power to another node connected via mesh-on-LAN.

Fixes #608
 2017-02-23 19:49:39 +01:00
kb-light
c9563cdebd scripts: check_site_lib: introduce need_string_array_match() (#1016) 2017-02-21 09:45:33 +01:00
Matthias Schiffer
184cb1010d
gluon-core: add single_as_lan option to configure a single ethernet port as LAN instead of WAN 2017-02-10 22:48:23 +01:00
Matthias Schiffer
e39cbcbda1
gluon-core: gluon.util: make exec() replace all stdio files with /dev/null 2017-02-10 22:09:59 +01:00
Matthias Schiffer
ea12cb770d
gluon-core: nicer indentation of /lib/gluon/upgrade/020-interfaces 2017-02-10 22:08:51 +01:00
Matthias Schiffer
e5cb125737
Move wifi24/5 and mesh_on_wan/lan site validators from gluon-mesh-batman-adv-core to gluon-core 
These values have been in use in gluon-core for some time, the validators
need to be moved as well.
 2017-02-10 21:19:34 +01:00
Matthias Schiffer
f9a52fd54f
Move luci-base dependency from gluon-core to gluon-setup-mode 
Nothing outside the config mode depends on luci-base anymore.
 2017-02-10 02:10:02 +01:00
Matthias Schiffer
e665bfe64a
gluon-core: don't depend on luci.ltn12 2017-02-10 02:10:01 +01:00
Matthias Schiffer
c83b5b3cab
treewide: get rid of luci.util outside of config mode/advanced settings 2017-02-10 02:10:01 +01:00
Matthias Schiffer
6cf03bab37
treewide: replace normal uses of luci.model.uci with simple-uci to reduce LuCI dependencies 
We also make use of the boolean support of simple-uci to make scripts
clearer.
 2017-02-10 02:10:01 +01:00
Matthias Schiffer
6b62e2fc78
gluon-core: check_site.lua: only accept /64 as prefix6 
A lot of our code does not actually work with other prefix lengths.

Fixes #1014
 2017-01-26 18:59:38 +01:00
Christof Schulze
8b083d4986 gluon-core: check_site.lua: fix indentation 2017-01-24 23:21:10 +01:00
Christof Schulze
e2e910fb41 gluon-core: add configuration that enables the next_node to be used as dns cache 2017-01-24 23:20:40 +01:00
Matthias Schiffer
0a8e028e8f
gluon-core: upgrade: don't print an error message on systems without opkg 2017-01-19 13:10:57 +01:00
Matthias Schiffer
78b2775eec
Use LEDE as base for Gluon 2017-01-18 17:21:43 +01:00
Matthias Schiffer
04818c170b
package: refactor add_to_set/remove_to_set to get rid of last LuCI patch 2017-01-18 16:28:54 +01:00
Matthias Schiffer
2dd8a700ca
package: avoid use of GLUONDIR variable 2017-01-17 21:22:58 +01:00
Matthias Schiffer
99471f8d5d
ar71xx-generic: add support for TP-Link WBS210/510 (untested) 
Closes #844
 2017-01-06 12:02:32 +01:00
Christof Schulze
e41e5cb8d9 gluon-core: add get_mesh_devices(uconn) to gluon.util which will return all devices being up and having proto = gluon_mesh 2016-12-21 23:51:48 +01:00
Christof Schulze
0abe350782 gluon-core: replace blanks by tabs in gluon.util 2016-12-21 23:47:03 +01:00
Matthias Schiffer
d2373590e0
gluon-core: add support for removing sysctl settings 2016-12-10 23:43:44 +01:00
rubo77
2a101ddd56
gluon-core: add dirty flag to gluon-version, add site-version 2016-12-06 20:05:34 +01:00
Matthias Schiffer
20fc162b38
gluon-core, gluon-setup-mode: fix WAN/LAN assignment on CPE210 
The interfaces were accidentially switched when the CPE210 was separated
from the CPE510 code.
 2016-11-22 20:01:13 +01:00
Matthias Schiffer
b902ddd8df
gluon-next-node: make IPv4 next-node address optional 
If next_node.ip4 is not set or gluon-next-node is not used, prefix4 will
now be optional as well.
 2016-09-10 17:15:16 +02:00
Matthias Schiffer
6cddaedfc7
Reorganize MAC addresses, always explicitly set address for private WLAN 
Fixes #842
 2016-09-07 02:14:42 +02:00
Matthias Schiffer
4f39be09c9
gluon-core: migrate custom batadv interfaces to gluon_mesh proto 
Users may have defined additional mesh interfaces. Properly migrate these
to avoid subtly breaking the network config (and make them ready for new
mesh protocols).
 2016-09-07 02:14:42 +02:00
Matthias Schiffer
8434896014
gluon-mesh-batman-adv-core: move config not specific to batman-adv to gluon-core 2016-09-07 02:14:42 +02:00
Matthias Schiffer
5cd6295265
gluon-core: add gluon_mesh netifd proto 
This new protocol will allow configuring mesh interfaces independently of
the used mesh protocol.
 2016-09-07 02:14:42 +02:00
Matthias Schiffer
7e0075584d
Use a "pretty" hostname where possible 
Fixes #414
 2016-08-27 16:33:37 +02:00
kb-light
6ff94aca35 gluon-core: make wifi rates configurable by site.conf 
and add documentation
 2016-08-27 07:11:58 +02:00
Linus Lüssing
6594ba314c gluon-core: reenable multicast snooping on WAN side 
Just like we enabled multicast snooping on the batman-adv client bridge
again, let's do the same for the WAN side.

With one exception: The IGMP/MLD querier is kept disabled to avoid
becoming too "bossy"/"noisy" on a foreign network. The main router on
the WAN side should perform querying and by that enable
IGMP/MLD/snooping if it considers this appropriate there.

Signed-off-by: Linus Lüssing <linus.luessing@c0d3.blue>
 2016-08-23 00:21:26 +02:00
Matthias Schiffer
b1a753e1c5
gluon-core: allow setting PoE passthrough default setting from site.conf 2016-07-30 00:00:39 +02:00
Matthias Schiffer
279a409198
gluon-core: split get_wlan_mac_from_driver() out of get_wlan_mac() 2016-07-27 17:25:05 +02:00
Matthias Schiffer
2afe34efec
Use MAC addresses provided by WLAN drivers by default 
Some drivers (mt76) don't support arbitrary MAC addresses. Use the
addresses provided by the driver (avoiding the primary address) by default,
but fall back to our has-based scheme when the driver doesn't provide
(enough) addresses.
 2016-07-20 18:42:56 +02:00
Matthias Schiffer
c8bc4620d1
gluon-core: unify indentation in gluon/util.lua 2016-07-20 17:51:09 +02:00
Jan-Tarek Butt
1c1f490527
Minify all Lua code 2016-07-10 20:14:25 +02:00
Matthias Schiffer
42910c0606
ramips-mt7621: use phy1 MAC address as primary on DIR-860L B1 2016-07-10 15:51:07 +02:00
Matthias Schiffer
bae721a9bb
Add target ar71xx-mikrotik 
Fixes #121

Based-on-patch-by: Tobias Hachmer <tobias@hachmer.de>
 2016-06-23 00:29:28 +02:00
Matthias Schiffer
dc485f7356
gluon-core: make gluon.platform.match() match all boards when no boards are given 2016-06-23 00:07:25 +02:00
Sven Eckelmann
fa04fff88d ar71xx-generic: Add support for OpenMesh MR1750v2 
The new MR1750v2 device support is only available in LEDE master. The
relevant patches have to backported to add support for them in Gluon

Signed-off-by: Sven Eckelmann <sven.eckelmann@open-mesh.com>
 2016-06-17 20:04:00 +02:00
Sven Eckelmann
3ccd516971 ar71xx-generic: Add support for OpenMesh OM2P-HSv3 
The new OM2P-HSv3 device support is only available in LEDE master. The
relevant patches have to backported to add support for them in Gluon

Signed-off-by: Sven Eckelmann <sven.eckelmann@open-mesh.com>
 2016-06-17 20:04:00 +02:00
Sven Eckelmann
780f7cad2a ar71xx-generic: Use eth0 as OpenMesh primary mac address 
The OpenMesh devices have a sticker with the eth0 mac address on the
bottom. Also all other mac addresses are calculated based on this address.
Therefore, it is better to use this as primary mac address instead of the
WiFi mac address.

Signed-off-by: Sven Eckelmann <sven.eckelmann@open-mesh.com>
 2016-05-23 21:39:27 +02:00
Matthias Schiffer
cab23b1838
ar71xx-generic: switch default WAN/LAN assignment on Ubiquiti UAP Pro 
Fixes #764
 2016-05-14 01:02:25 +02:00
Matthias Schiffer
087112a09b
ar71xx-generic: add support for UniFi AC PRO/LITE (LITE untested) 
Also backport some patches improving QCA956x support.
 2016-05-14 00:48:10 +02:00
lemoer
c73a12e0ea Change MAC schema generation (#715) 
While ath9k/ath10k devices can supprt VIFs with any combination of MAC addresses, there are also adapters which have a hardware MAC filter which only allows a few bits to differ. This commit changes the addresses of all VIFs to ony differ in the last 3 bits, which is required to support many Ralink/Mediatek based WLAN adapters.

Technically, the new addresses are generated by calculating an MD5 hash of the primary MAC address and using a part of this hash as a prefix for the MAC addresses.

The addresses (BSSIDs) of the AP VIFs are also reused for the LAN and WAN interfaces in mesh-on-LAN/WAN mode to reduce the number of needed addresses, and thus reduce the chance of collisions. This is not a problem as the MAC addresses of the AP VIFs are never used except as BSSID, and thus not seen by routing protocols like batman-adv.

Fixes #648

[Matthias Schiffer: rewrote commit message]
 2016-04-27 12:16:39 +02:00
Matthias Schiffer
c18d43d2cb gluon-core: use correct file variable in get_site_config() 2016-04-24 15:55:37 +02:00
Jan Niehusmann
bdcd166c7c ar71xx-generic: add support for Carambola 2 
Device information can be found at:
http://www.8devices.com/products/carambola-2
https://wiki.openwrt.org/toh/8devices/carambola2

I only did some minimal testing of gluon on the carambola 2 development
board:

 - Config mode works
 - Connects to Wifi Mesh
 - Allows clients to connect

Notably, autoupgrade has not yet been tested.

Change to 010-primary-mac is necessary as the mac address printed
on the sticker is the one of eth0, not the wifi mac.
 2016-04-22 08:32:19 +02:00
Jan-Philipp Litza
3a3c922a4d gluon-core: use exec on uci commit 2016-04-03 16:14:48 +02:00
Matthias Schiffer
4658afb2c6 gluon-core: commit all UCI configs at the end 
Avoid commiting configs inbetween to decrease number of flash writes.

Fixes #714.
 2016-04-02 18:56:45 +02:00
Linus Lüssing
0fc9e1d966 update config: "firewall: Allow IGMP and MLD input on WAN" (r45613) 
Adopt the according modifications to the default firewall settings of
the WAN interface from OpenWRT, revision 45613.

Signed-off-by: Linus Lüssing <linus.luessing@c0d3.blue>
 2016-03-08 07:55:55 +01:00
Kokel
388d264ff0 gluon-core: add preserve wifi channels feature 
This new feature introduces the new uci section 'gluon-core.wireless' with a preserve_channels option:
 * preserve_channels (boolean)

By setting this option to 1 (true) wifi channels will be preserved during upgrades.
 2016-02-10 07:06:36 +01:00
Matthias Schiffer
9004028cb4 Convert gluon-announce Lua code to C modules, rename to gluon-respondd 
gluon-announced and gluon-announce are merged to gluon-respondd.
 2016-02-02 09:18:12 +01:00
Matthias Schiffer
f23e024787 Convert site.conf to JSON during build 
This will allow us to use its content from other languages than Lua as
well.
 2016-01-02 23:49:25 +01:00
Matthias Schiffer
412e1ef147 gluon-core: fix removal of "OpenWrt" default WLAN interface 
Fixes #534
 2015-10-28 17:06:29 +01:00
Matthias Schiffer
3ddcf50b80 Drop htmode field from config, always use HT20 
Fixes #487
 2015-10-27 01:57:10 +01:00
Matthias Schiffer
22130e84e8 Merge gluon-radio-config into gluon-core 
gluon-radio-config contained only a single file. The code has been adjusted
to allow creating a Gluon configuration without WLAN support by removing
the wifi24 and wifi5 sections from site.conf.
 2015-10-26 20:59:56 +01:00
Matthias Schiffer
d5c334af6d gluon-core: replace opkg site configuration to make it more flexible 
The new options allow specifying custom repositories and are evaluated
in an upgrade script, not during build.
 2015-10-14 02:57:29 +02:00
Alex
b465504ae8 add: info for 802.11s interface 
additional information for commit 2a93c58042
 2015-09-13 14:32:53 +02:00
Jan-Philipp Litza
339a6c9959 Remove dependencies on luci.util (and partly nixio.fs) from announce scripts 2015-09-02 13:17:59 +02:00
Nils Schneider
177086b881 gluon-radio-config: basic wireless configuration 
Split basic radio configuration from gluon-mesh-batman-adv as this will
be required for virtually any wireless mesh protocol.

This package takes care of setting:

  - wireless channel,
  - htmode and
  - regulatory domain

gluon-mesh-batman-adv-core depends on this package.
 2015-08-18 11:41:14 +02:00
Matthias Schiffer
f6498e8773 Update modules 2015-07-18 18:02:13 +02:00
Matthias Schiffer
d386ccdcf8 Always use eth0 address as primary address on x86 and brcm2708 
These targets don't have a WLAN adapter by default, so it doesn't make
sense to default to the phy0 address.
 2015-07-10 20:22:53 +02:00
Matthias Schiffer
ab10be9f50 We're on Chaos Calmer now 2015-05-22 01:09:19 +02:00
Matthias Schiffer
bca916dd55 gluon-core: disable multicast snooping on the WAN bridge 
This seems to mitigate weird bridge forwarding issues.
 2015-04-27 22:00:38 +02:00
Matthias Schiffer
cd34cb2ebb gluon-core, gluon-setup-mode: improve support for UAP Outdoor+ 2015-04-08 00:44:12 +02:00
Jan-Philipp Litza
335026af09 Allow empty hostname prefix 
In Bremen it has been noted that a prefix may lead people to believe it
has to stay there and thus naming their nodes "ffhb-*", which is not
what the community wants (see FreifunkBremen/gluon-site-ffhb#1).

However, an empty prefix lead to the connecting hyphen still being
inserted. This commit thus makes the hyphen part of the configured
prefix and allows the prefix to be missing from the `site.conf`.
 2015-03-21 13:43:45 +01:00
Matthias Schiffer
65b44ca4ce Rename gluon-config to gluon-site 2015-03-19 20:14:40 +01:00
Matthias Schiffer
dce26de28c gluon-core: add i18n support 2015-03-18 20:24:57 +01:00
Matthias Schiffer
93cc8e543e gluon-core: fix primary MAC address on TP-LINK Archer C5/C7 2015-03-10 13:40:45 +01:00
Matthias Schiffer
cbedc9421e gluon-core: sysconfig: differentiate between nil and empty string 2015-01-26 20:18:33 +01:00
Matthias Schiffer
c45a0bcdc1 gluon-core: fall back to eth0 for the primary MAC address when there is no WLAN device 2015-01-25 02:29:43 +01:00
Matthias Schiffer
9b172bbaf4 Move all upgrade scripts to a common directory 
Moving the scripts to a common directory not only vastly simplifies the
zzz-gluon-upgrade script, but also allows to define an ordering of such
scripts across packages.
 2015-01-24 11:27:47 +01:00
Matthias Schiffer
6f11279438 gluon-core: convert all initial scripts to invariant scripts 2015-01-24 11:14:09 +01:00
Matthias Schiffer
78b43b1dd6 gluon-core, gluon-setup-mode: fix LAN and WAN on nanostation-m-xw 2014-11-26 23:30:56 +01:00
Matthias Schiffer
9dd4f52bfa CPE510-specific config (switch WAN and LAN, config mode on WAN) 2014-11-26 19:50:45 +01:00
Matthias Schiffer
1803525745 Configure unique MAC addresses for all WLAN interfaces 2014-09-15 19:55:09 +02:00
Matthias Schiffer
b51e1063b7 Add utility function to generate unique MAC addresses derived from the primary MAC 2014-09-15 19:55:09 +02:00
Nils Schneider
0de7bf5f64 gluon-core: port initial/020-wireless to lua 2014-09-15 19:50:10 +02:00
Nils Schneider
5fa97f8fdb gluon-core: add node_id() to gluon.util 2014-09-11 12:27:29 +02:00
Jan-Philipp Litza
ae43f3dc3e gluon-core: Remove VERSION_DIR hack 
As the (removed) comment said, this was a one-time-hack that was obsoleted long ago.
 2014-08-30 15:13:52 +02:00
Matthias Schiffer
3762f52c69 gluon-core: restructure WAN configuration 2014-08-09 14:39:21 +02:00
Matthias Schiffer
201acaa3a9 Dependency fixes for the new LuCi version 2014-08-06 12:06:49 +02:00
Matthias Schiffer
971dec8d27 gluon-core: remove now unused dnsmasq.d support 2014-07-20 04:04:27 +02:00
Matthias Schiffer
d638359215 Explicitly set the WAN MAC address on all models where WAN is a VLAN device 
Also move it to gluon-mesh-batman-adv, as mesh_on_wan is the only feature that
needs a unique MAC address on the WAN interface.
 2014-07-19 18:40:12 +02:00
Matthias Schiffer
16060d25d5 Move essential firewall rules from gluon-firewall to gluon-core and gluon-mesh-batman-adv 
The now empty gluon-firewall is removed.
 2014-07-14 17:53:41 +02:00
Matthias Schiffer
eae6c25de6 Add support for IPv6 mesh VPN connections 
The support is still very limited (IPv6-only DNS on WAN doesn't work yet), and
we now need fastd running as root, but apart from that, is should work.
 2014-07-11 16:57:28 +02:00
Matthias Schiffer
58ced87261 Use nicer platform match 2014-07-11 12:11:47 +02:00
Matthias Schiffer
6f1777b072 gluon-core: add platform utility module 2014-07-11 11:36:53 +02:00
Matthias Schiffer
1a52c6bdf2 gluon-core: remove sysconfig.sh 2014-07-10 23:45:03 +02:00
Matthias Schiffer
f73d727ae6 Remove all remaining uses of sysconfig.sh 2014-07-10 23:44:06 +02:00
Matthias Schiffer
7773afdc18 gluon-core: remove model.sh and model.lua 2014-07-10 17:57:31 +02:00
Matthias Schiffer
81dc4f44e2 gluon-core: remove now unused sysctl.sh 2014-07-07 22:23:56 +02:00
Matthias Schiffer
3dddafea21 gluon-core: convert network config script to lua 2014-07-07 21:58:08 +02:00
Matthias Schiffer
0fd7ac1768 gluon-core: add and use a sysctl Lua module 2014-07-07 21:57:37 +02:00
Matthias Schiffer
1c0429ce8f gluon-core: extend user management library and convert it to Lua 2014-07-07 21:48:35 +02:00
Matthias Schiffer
2ec02a41c2 gluon-core: add functions to unset sysconfig settings 2014-07-05 19:39:24 +02:00
Matthias Schiffer
ffd86668fe Validate site.conf 2014-07-05 02:48:56 +02:00
Matthias Schiffer
e317bdc230 gluon-core: add gluon.model lua module 2014-06-09 17:56:29 +02:00
Matthias Schiffer
ee307ec1de gluon-core: make Lua files proper modules 2014-05-17 13:43:08 +02:00
Matthias Schiffer
b95a4d67e8 gluon-core: convert generated upgrade scripts to Lua 2014-05-14 11:06:07 +02:00
Matthias Schiffer
d31ea9eba9 gluon-core: add site_config loader script 2014-05-14 08:00:54 +02:00
Matthias Schiffer
17b9514e38 Add gluon-config package containing the site config 2014-05-13 20:09:28 +02:00
Matthias Schiffer
49700fc70d gluon-core: add sysconfig_isset function 2014-03-02 17:36:12 +01:00
Matthias Schiffer
bbd8ee6772 gluon-core: switch LAN and WAN on nanostation-m 2014-03-02 17:36:12 +01:00
Matthias Schiffer
96b213c386 We DON'T want the gluon version file to collide with the package version stamp dir 2014-02-26 10:21:14 +01:00
Matthias Schiffer
8f9ee8d62a gluon-core: add version file 2014-02-25 11:30:07 +01:00
Matthias Schiffer
b953d5026f gluon-core: use awk instead of grep+cut 2014-02-23 20:23:47 +01:00
Matthias Schiffer
5f8e34fc2f gluon-core: remove support for incremental upgrade scripts 
As we don't have any older gluon versions so far, and hope to be able to do all
upgrades with invariant scripts, remove the code for now.

If we ever see the need to add such upgrade scripts, we can just re-add this.
 2014-02-23 20:20:16 +01:00
Matthias Schiffer
4fa228365a gluon-core: don't call legacy scripts on normal upgrades 2014-02-23 17:29:32 +01:00
Matthias Schiffer
dd0ec447e7 gluon-core: adjust to new escaped array handling for generate expressions 2014-02-23 06:31:23 +01:00
Matthias Schiffer
2454c8abb7 Add gluon-legacy package with legacy upgrade scripts 2014-02-22 08:27:51 +01:00
Matthias Schiffer
65c7db78fd Convert more upgrade scripts to the new sysctl helper 2014-02-21 19:58:38 +01:00
Daniel Ehlers
6f302fc8df gluon-core: force kernel panic on out of memory 
In combination with kernel.panic the node will reboot if out of memory.
 2014-02-18 00:21:12 +01:00
Matthias Schiffer
62c30abd6f gluon-core: ensure the release file is always up-to-date 2014-01-31 15:25:49 +01:00
Matthias Schiffer
4cf9b23e02 Enable DNS servers from mesh, disable on wan 2014-01-25 02:09:35 +01:00
Matthias Schiffer
ded5925f83 Remove odhcp6c.user hack 2014-01-25 01:54:19 +01:00
Matthias Schiffer
bc1be30486 More fixes for strange network interface configurations 2014-01-22 22:04:08 +01:00
Matthias Schiffer
b8820bab61 Properly support devices with only one ethernet interface 2014-01-22 20:44:34 +01:00
Matthias Schiffer
bb4a9fd5af Fix race condition in dnsmasq config dir handling 2014-01-22 19:52:17 +01:00
Matthias Schiffer
3369802094 gluon-core: sysconfig: don't print error message for unset config 2014-01-22 19:45:07 +01:00
Matthias Schiffer
f1dae6ca6e gluon-core: move initial/020-wireless from generate to files 2014-01-21 05:24:01 +01:00
Matthias Schiffer
e03fb9f8eb gluon-core: add support for NTP server configuration 2014-01-21 04:22:59 +01:00
Matthias Schiffer
1ba10ac018 Add support for custom dnsmasq config and odhcp6c handler scripts 2014-01-21 03:01:12 +01:00
Matthias Schiffer
1b924d6265 gluon-core: use gluon release in package version string 2014-01-20 05:07:55 +01:00
Matthias Schiffer
ee4e896fea gluon-core: use GLUON_RELEASE from environment 2014-01-20 02:35:21 +01:00
Matthias Schiffer
f36f7bcf26 Merge gluon-release into gluon-core 2014-01-20 01:59:10 +01:00
Matthias Schiffer
3275c92f72 gluon-core: add function to add users 2014-01-14 18:19:51 +01:00
Matthias Schiffer
d204b0e24f Remove initscript enable/disable hacks 
Better configure these properly.
 2014-01-13 18:29:00 +01:00
Matthias Schiffer
13e3d7ff79 gluon-core: add sh file to get model name etc. 2014-01-12 21:33:44 +01:00
Matthias Schiffer
a259e771e9 gluon-core: fixup WAN interface MAC address setting 2014-01-11 21:31:28 +01:00
Matthias Schiffer
a626c9a165 gluon-core: remove left over 'EOF' from config script 2014-01-11 20:34:58 +01:00
Matthias Schiffer
1b9c8dcc0b Don't accept router advertisements by default 2014-01-11 17:43:35 +01:00
Matthias Schiffer
1be0a7667f Make package version depend on the site config version where necessary 2014-01-04 09:19:13 +01:00
Matthias Schiffer
4521362ce3 gluon-core: clean up upgrade main script 2013-10-09 21:56:32 +02:00
Matthias Schiffer
8b069954a0 gluon-core: clean up uci config 2013-10-03 18:54:59 +02:00
Matthias Schiffer
e73f79f392 Move some more configuration into the corrent packages, correctly configure multiple radios 2013-10-03 18:04:03 +02:00
Matthias Schiffer
00a97602a4 gluon-core: upgrade: fix directory movement 2013-10-01 21:38:21 +02:00
Matthias Schiffer
568cfbf398 gluon-core: ensure version stamp dir existence 2013-10-01 21:38:21 +02:00
Matthias Schiffer
d508728da6 gluon-core: fix typo 2013-10-01 21:38:21 +02:00
Matthias Schiffer
7771cd9f2e gluon-core: make 001-sysconfig executable 2013-10-01 21:38:21 +02:00
Matthias Schiffer
2d93cad89d gluon-core: always handle core scripts first 2013-10-01 21:38:21 +02:00
Matthias Schiffer
fa1774a4e6 Remove batman-adv specific parts of gluon-core 2013-10-01 21:38:21 +02:00
Matthias Schiffer
e684418cb3 Use odhcp6c for interface configuration 2013-09-30 18:47:46 +02:00
Matthias Schiffer
946438f215 gluon-core: remove deprecated accept_ra settings 2013-09-30 18:47:46 +02:00
Matthias Schiffer
f2d9bdaba7 Fix MAC address getters for current OpenWRT 2013-09-28 23:39:53 +02:00
Matthias Schiffer
4783a52a71 Add hostname prefix config 2013-09-28 23:13:57 +02:00
Matthias Schiffer
6543ef9725 Adjust some old scripts to gluon (TODO: reimplement backwards compatiblity) 2013-09-28 21:48:46 +02:00
Matthias Schiffer
05fb012ae4 Generate wifi config 2013-09-28 18:40:37 +02:00
Matthias Schiffer
eecf9b06fd Move disable-services script to invariant directory 2013-01-31 16:24:29 +01:00
Matthias Schiffer
a7e22f30b3 Move batman-adv migration scripts to gluon-mesh-batman-adv package 2013-01-31 16:15:32 +01:00
Matthias Schiffer
0637c9fa6d More makefiles for some basic packages 2013-01-31 11:36:18 +01:00
Matthias Schiffer
19b611f8ab Add gluon-core package 
This is the most basic core of the Gluon framework. Most upgrade scripts will
have to be rewritten and/or moved to other packages.
 2013-01-31 10:23:27 +01:00