nils/gluon
1
0
Fork 0
Code Issues Pull Requests Packages Projects Releases Wiki Activity
4,047 Commits 26 Branches 63 Tags 18 MiB
47eda6a501
Commit Graph

512 Commits

Author SHA1 Message Date
David Bauer
9dba2ca580 ramips-mt76x8: add support for GL.iNet VIXMINI 2019-10-30 14:38:48 +01:00
David Bauer
ac971f88e8 mvebu-cortexa9: rename Linksys WRT1200AC 2019-10-30 00:06:14 +01:00
David Bauer
825577f6df ramips-mt7621: fix sysupgrade extension for ER-X 2019-10-30 00:06:14 +01:00
Martin Weinelt
ba3415059c ar71xx-generic: drop ALFA N2, N5, Tube2H and Hornet-UB 
Their kernel partition is too small, the OpenWrt build system
is unable to create an image.
 2019-10-30 00:06:14 +01:00
David Bauer
82cdd5f808 targets: adapt ath10k selection to OpenWrt 19.07 
This changes the ath10k firmware and driver selection, as
ath10k-ct is now the default in upstream OpenWrt.

However, for 802.11s operation we need the QCA firmware and driver.
 2019-10-30 00:06:14 +01:00
David Bauer
09780191cb targets: remove wpad-basic by default 
This is necessary, as wpad-basic conflicts with hostapd-mini.
 2019-10-30 00:06:14 +01:00
David Bauer
3522197ff9 ar71xx-generic: add missing ath10k packages (#1844) 
This adds previously absent ath10k packages definitions. This way,
devices correctly select CandelaTech firmware correctly, when
GLUON_WLAN_MESH is set to IBSS.

This is also necessary for all devices, when OpenWrt is switched to
19.07.
 2019-10-22 02:15:35 +02:00
Marssl78
b823b80356 ar71xx-generic: add support for TP-Link Archer C60 v2 (#1840) 2019-10-06 22:11:02 +02:00
Andreas Ziegler
94ca071e12 ar71xx-generic: fix device alias for Ubiquiti UniFi AC LR 
fixes #1834
fixes #1332
 2019-10-03 21:22:12 +02:00
David Bauer
ea24298f2d ar71xx-generic: add ath10k packages to OCEDO Koala (#1838) 
The OCEDO Koala was missing the correct package definition. Because of
this, firmware is potentially built with the wrong ath10k firmware /
driver.
 2019-10-03 01:44:20 +02:00
Andreas Ziegler
07fe28c855
ar71xx-generic: add zram-swap to boards with 8M flash but only 32M memory (#1819) 2019-09-23 09:54:54 +02:00
Martin Weinelt
be965e7e4a ar71xx-generic: deprecate ALFA AP121, Hornet-UB, Tube2H, N2/N5 
The kernel partition on these devices is too small for the
OpenWrt 19.07 kernel. It is also located after the rootfs, so
we cannot grow it further.

Therefore mark these devices as deprecated now.
 2019-09-20 17:02:41 +02:00
Andreas Ziegler
b113e0f517
ramips-rt305x: remove opkg and USB packages from 4M flash boards (#1807) 
reduce size by removing dispensable packages,
to fix builds of this target in most cases.
 2019-09-14 13:24:37 +02:00
Martin Weinelt
61bd88309e Revert "ar71xx-generic: unmark archer-c25-v1 as broken" 
This reverts commit fb08e10494.

Devices featuring ath10k radios should at least 128 MB of memory
as their driver is quite memory hungry.

Devices with a configuration (1x ath10k, 64M memory) like this have
often been seen as running out of memory.
 2019-08-18 19:32:43 +02:00
David Bauer
35bde952e1 ramips-mt7621: add missing broken flg for ASUS RT-AC57U 2019-08-15 15:53:04 +02:00
Simon Terzenbach
c124f6f410 mcp85xx-p1020: add support for Aerohive HiveAP 330 2019-08-13 13:25:20 +02:00
Vincent Wiemann
0a22218304 ar71xx-generic: Fix packages for GL.iNet AR750 (#1792) 
The profile for GL.iNet AR750 currently selects ATH10K_PACKAGES, but this device actually has a QCA9887 which needs another driver.
This commit fixes the issue by setting ATH10K_PACKAGES_QCA9887 instead.
 2019-08-10 10:17:29 +02:00
Simon Terzenbach
c37644e004
ar71xx-nand: add support for Aerohive HiveAP 121 2019-08-02 00:37:26 +02:00
David Bauer
9abce01e87 ramips: add support for ASUS RT-AC57U (#1786) 2019-07-13 14:32:22 +02:00
Andreas Ziegler
350fe73fe5 ramips-mt76x8: add support for TP-Link TL-MR3420 v5 2019-07-08 14:29:00 +02:00
Adrian Schmutzler
851dfc6a93 ar71xx-generic: Add support for TP-Link CPE210 V3 (#1696) 
Signed-off-by: Adrian Schmutzler <freifunk@adrianschmutzler.de>
 2019-06-29 14:49:54 +02:00
Martin Weinelt
fb08e10494
ar71xx-generic: unmark archer-c25-v1 as broken 
memory usage seems to behave more reasonable for a while now
 2019-06-28 01:58:35 +02:00
Matthias Schiffer
09a09d634a
scripts: avoid global variables in target handler scripts 2019-06-18 01:34:45 +02:00
Matthias Schiffer
8e00149f11
targets: add deprecated flags as appropriate 2019-06-15 23:34:07 +02:00
Matthias Schiffer
071cf7b20f
Switch to Lua for target definitions 
The old bash-based parsing code was way too complex. Replace it with Lua.
 2019-06-15 23:34:07 +02:00
Matthias Schiffer
a44a5dce02
ar71xx: Onion Omega is BROKEN 
This device doesn't have an Ethernet port, and even with the Ethernet
shield, eth0 is not configured.
 2019-06-15 23:30:23 +02:00
Matthias Schiffer
0970dd3e01
targets: unset executable mode for target files 
For some reason, some of the target files were executable.
 2019-06-12 14:15:25 +02:00
Petr Štetiar
9dc1ac7f58
build: replace hardcoded paths with overridable variables 
Signed-off-by: Petr Štetiar <ynezz@true.cz>
 2019-04-22 22:00:45 +02:00
Tata
12b87b2441 ipq40xx: add jalapeno from 8devices (#1706) 
Signed-off-by: Jan-Tarek Butt <tarek@ring0.de>
 2019-04-19 15:15:00 +02:00
Matthias Schiffer
134a6460a7
build: move hostapd-mini package from generic target to Makefile 
By passing the package name through merge_packages, it becomes possible to
override the package choice in GLUON_SITE_PACKAGES again, for example:

	GLUON_SITE_PACKAGES += -hostapd-mini hostapd
 2019-04-19 13:53:09 +02:00
bobcanthelpyou
2ce07ae2fe ar71xx: add support for TP-Link TL-WR840N v2 (#1697) 2019-04-12 01:32:11 +02:00
Andreas Ziegler
b5b2a2176b ar71xx: remove redundancy from 2 target specifications 2019-03-31 17:45:24 +02:00
Manu.WTF
3b0e5fab71 ramips-mt7620: add support for Xiaomi MiWifi Mini (#1638) 2019-03-29 12:43:05 +01:00
David Bauer
a9a4abb637 ipq806x: add support for NETGEAR R7800 (#1669) 
The device is broken until the next release. The LEDs are currently not
working (fixed in current OpenWRT master).

Also give a brief explanation about the BROKEN status being dependent on
the WiFi chip used and not the SoC family in general.
 2019-03-28 14:49:17 +01:00
Manu.WTF
917d6af299 ar71xx: add support for D-Link DAP-1330 (#1672) 2019-03-15 23:35:35 +01:00
Martin Weinelt
ce8cf1b900
ramips-mt76x8: fix image name for wr841n v13 2019-03-14 04:58:19 +01:00
David Bauer
5b97b07f6a ramips-mt76x8: add support for Netgear R6120 (#1650) 2019-02-16 14:41:48 +01:00
Steffen Förster
7b092e1e13 ramips-mt7620: add support for ASUS RT-AC51U (#1642) 2019-02-09 23:31:58 +01:00
David Bauer
1ace3d5bb0 ramips-mt76x8: add support for TP-Link Archer C50 v4 (#1641) 
This backports the TP-Link Archer C50 v4.

We are dropping the following upstream commits. They add support for the
TP-Link recovery-flag which enabled the web-recovery. As they are not
needed for the router to work, we drop them for now.

28cd2ca base-files: sysupgrade: support additional mtd options
1e06482 mtd: add logic for TP-Link ramips recovery magic
 2019-02-08 02:48:09 +01:00
oszilloskop
b9cf102f46 ar71xx: fix incorrect gl-ar150 and gl-ar300m image names (#1640) 
also added manifest aliases for gl-ar150, gl-ar300m, gl-ar750
 2019-02-07 01:55:07 +01:00
txt-file
97485dcecf target x86-*: change from ext4 to squashfs (#1634) 
This allows for smaller firmware images and makes it possible to reset a
device via firstboot command.

Signed-off-by: Matthias Fritzsche <matthias@chemnitz.freifunk.net>
 2019-02-03 23:57:16 +01:00
Martin Weinelt
9342e31d45
brcm2708-bcm2708: add manifest alias for Raspberry Pi Model B Plus Rev 1.2 2019-02-03 21:15:32 +01:00
Matthias Fritzsche
3abadc286f ar71xx-mikrotik: remove kmod-ath5k package 
ath5k supports only IEEE 802.11 a/b/g

Signed-off-by: Matthias Fritzsche <matthias@chemnitz.freifunk.net>
 2019-01-29 12:54:30 +01:00
Matthias Fritzsche
cecfe03839 ar71xx-mikrotik: add missing OpenWrt image types 
Signed-off-by: Matthias Fritzsche <matthias@chemnitz.freifunk.net>
 2019-01-29 12:54:01 +01:00
Malte Moeller
692f61ec5a change device identifier to match machine identifier 
this matches the output of
lua -e 'print(require(platform_info).get_image_name())'

This way the manifest file is accepted by the autoupdater
 2019-01-18 23:33:05 +01:00
Manu.WTF
04cca280a1 ramips-mt7620: add support for Nexx WT3020 (8M) 2019-01-17 22:42:10 +01:00
David Bauer
55d2acd709 ramips-mt76x8: remove broken flag (#1608) 
This commit removes the broken flag from all devices in the mt76x8
subtarget.

The stability of the mt76 driver for the mt7628 and mt7612 has greatly
improved in the last half-year. It might be still behind ath9k and
ath10k but it is suitable for daily use.

This affects the following devices:

 - GL.iNet MT300N v2
 - TP-Link Archer C50 v3
 - TP-Link TL-WR841 v13
 2018-12-29 23:32:02 +01:00
Martin Weinelt
656230a79f ar71xx: add support for FRITZ!Repeater 300E (#1604) 
Signed-off-by: Martin Weinelt <martin@darmstadt.freifunk.net>
 2018-12-29 22:51:57 +01:00
Matthias Schiffer
a6bce7959d
ramips-mt76x8: remove VoCore 2 BROKEN flag again 
The driver has stablized enough to officially support ramips-mt76x8 devices
again. At least remove BROKEN for VoCore 2 (as it was supported before).
 2018-12-29 19:31:51 +01:00
Andreas Ziegler
5746fb08c4 ramips-mt7621: remove BROKEN flag for ZBT WG3526-16M & WG3526-32M 2018-12-28 21:15:29 +01:00
Martin Weinelt
e9c6153cd5
ramips-mt7621: unflag dir860l-b1 as broken with 11s mesh 
Signed-off-by: Martin Weinelt <martin@darmstadt.freifunk.net>
 2018-12-23 02:49:17 +01:00
Christoph Krapp
b5aa8c2f7c ar71xx: add support for ZyXEL NBG6616 
Signed-off-by: Christoph Krapp <achterin@googlemail.com>
 2018-12-20 14:12:50 +01:00
Christoph Krapp
1c590ca148 ar71xx: add support for UniFi-AC-Mesh-Pro 
Signed-off-by: Christoph Krapp <achterin@googlemail.com>
 2018-12-09 20:41:56 +01:00
Martin Weinelt
3601c9aba6 mt76x8: add support for GL.iNet GL-MT300N-V2 (#1548) 
Signed-off-by: Martin Weinelt <martin@darmstadt.freifunk.net>
 2018-11-14 23:35:02 +01:00
David Bauer
a51ec56363 ipq40xx: add support for ZyXEL NBG6617 (#1560) 2018-11-14 23:02:25 +01:00
David Bauer
c1967fe383 ar71xx: remove BROKEN flag for TL-WR810N v1 
Fixes #856
 2018-10-24 23:44:01 +02:00
David Bauer
665cc49d67 ar71xx: add support for Archer C7 v5 2018-10-15 00:38:18 +02:00
David Bauer
246a617d71 ar71xx: add support for TL-WR902AC v1 (#1546) 
This adds support for the TP-Link TL-WR902Ac v1 travel router.

The device is marked as broken due to 64MB which might be insufficient
in certain environments.
 2018-10-11 03:21:51 +02:00
Ruben Barkow
2a077f86cf ar71xx: unify position of comment containing BROKEN flag reason (#1545) 2018-10-02 01:03:55 +02:00
Matthias Schiffer
1e61e8e897
Disable build of kmod-jool again 
kmod-jool build is broken with current kernel 4.14.y.
 2018-09-30 19:09:23 +02:00
Sven Eckelmann
2b208647f7 ar71xx-generic: Reduce SquashFS blocksize to 64K (#1455) 
Some 32 MB devices like the Nanostation M2 suffer from sudden high loads
combined with a squashfs related OOM reboot:

  logd invoked oom-killer: gfp_mask=0x2420848, order=0, oom_score_adj=0
  CPU: 0 PID: 774 Comm: logd Not tainted 4.4.135 #0
  Stack : 804214dc 00000000 00000001 80480000 8182fa3c 80474803 804028d0 00000306
          804e378c 00001ade 00000040 00000000 00000000 800a7f10 00000006 00000000
          00000000 00000000 804063e0 80c69994 804e6542 800a5e8c 02420848 00000000
          00000001 801fd600 00000000 00000000 00000000 00000000 00000000 00000000
          00000000 00000000 00000000 00000000 00000000 00000000 00000000 00000000
          ...
  Call Trace:
  [<800721cc>] show_stack+0x54/0x88
  [<800d5468>] dump_header.isra.4+0x48/0x130
  [<800d5c38>] check_panic_on_oom+0x48/0x84
  [<800d5d64>] out_of_memory+0xf0/0x324
  [<800d9888>] __alloc_pages_nodemask+0x6b8/0x724
  [<800d2960>] pagecache_get_page+0x154/0x270
  [<80134cb0>] __getblk_slow+0x15c/0x374
  [<80160418>] squashfs_read_data+0x1c8/0x6e8
  [<80164628>] squashfs_readpage_block+0x32c/0x4d8
  [<801622a4>] squashfs_readpage+0x5bc/0x6d0
  [<800dd030>] __do_page_cache_readahead+0x1f8/0x264
  [<800d479c>] filemap_fault+0x1a8/0x458
  [<800efc1c>] __do_fault+0x64/0xd0
  [<800f2824>] handle_mm_fault+0x4a4/0xb40
  [<80076e98>] __do_page_fault+0x134/0x470
  [<80060820>] ret_from_exception+0x0/0x10

Reduction of the SquashFS blocksize should reduce the problem slightly on
these nodes. The image size will increase slightly but this should be no
problem for ar71xx-generic (in contrast to ar71xx-tiny).
 2018-09-23 14:34:14 +02:00
David Bauer
728d1ffdb1 mt76x8: flag target as broken (#1533) 
The MT76x8 is currently not stable enough for worry-free use with Gluon.
It suffers from reboots in intervals as little as 12 hours or WiFi
freezes for several hours.

It may be unflagged as soon the situation with mt76 got better.
 2018-09-17 22:40:44 +02:00
David Bauer
a29883986c ar71xx: add AVM FRITZ!WLAN Reapeater 450E (#1506) 2018-09-04 20:59:16 +02:00
Martin Weinelt
3fb83cc3d5 ipq806x: mark as broken because of unstable wifi drivers 2018-09-04 01:05:39 +02:00
Matthias Schiffer
fead411f87
brcm2708: adjust to changed OpenWrt image names 2018-08-11 00:19:28 +02:00
Martin Weinelt
0e21d17032 ar71xx-generic: prefer kmod-ath10k for 802.11s mesh (#1499) 
removes cryptic debug messages from kernel ring buffer and
also reduces memory usage by as much as 20-25 MiB.
 2018-08-01 03:37:56 +02:00
Sven Eckelmann
b9ec173ffb ipq40xx: add support for OpenMesh A62 
This device is a dual 5GHz device. It is recommended to manually change the
radio of the first device to the lower 5GHz channels and the second radio
to the upper 5GHz channels.
 2018-07-25 22:27:16 +02:00
Sven Eckelmann
36a5604dfe ipq40xx: add support for OpenMesh A42 2018-07-25 22:27:16 +02:00
David Bauer
04b446d8cd ramips: add support for TP-Link TL-WR841N v13 (#1470) 2018-07-25 22:19:59 +02:00
David Bauer
8395c08e66 ramips: add support for TP-Link Archer C50 v3 (#1487) 2018-07-23 04:34:37 +02:00
David Bauer
c3ceded76f ipq40xx: add support for IBSS 
Add support for IBSS meshing. Leave target marked as BROKEN for IBSS
as stability is unknown and WiFi LEDs are not working.

Functionality was tested in the network of Freifunk Frankfurt with other
ipq40xx and ar71xx devices.
 2018-07-16 01:39:36 +02:00
David Bauer
c4b1febd31 ipq40xx: add target 
This commit adds support for the new ipq40xx target.
 2018-07-16 01:39:36 +02:00
Christoph Krapp
4883bc7141 ar71xx: add support for TP-Link RE355 (#1478) 
Support is marked as broken because this device is sold in two variants,
one with 64M RAM and another with 128M. As of now 64M is not enough
for ath10k with 5GHz enabled.
As there is no indication known which variant one will get better mark
it as broken.

Signed-off-by: Christoph Krapp <achterin@googlemail.com>
 2018-07-15 18:29:42 +02:00
David Bauer
52bc028e6b ar71xx: add support for OCEDO Koala (#1475) 2018-07-13 01:25:58 +02:00
Julian
126b34ff14 mvebu: add correct subtarget (#1473) 2018-07-11 22:13:16 +02:00
Matthias Schiffer
63c16c01a0
scripts: move DEFAULT_FEEDS definition to a separate file 
modules.sh can't depend on openwrt/feeds.conf.default, otherwise the
initial update will fail.
 2018-07-11 21:47:50 +02:00
Matthias Schiffer
210d97c53e
Switch to OpenWrt 18.06 branch 2018-07-10 22:57:40 +02:00
Sven Eckelmann
3d18ae02d8 ar71xx: Add support for TP-Link CPE210 v2 (#1445) 2018-06-26 01:19:55 +02:00
Sven Eckelmann
384c2772c9 ar71xx: add ath10k packages for OpenMesh A40/A60 (#1444) 
The dependency line was lost during the rebase of the current master
version.

Fixes: 9d719a2e57 ("ar71xx: add support for OpenMesh A40/A60 (#1424)")
 2018-06-24 13:32:56 +02:00
Christoph Krapp
1a065fbe24 ar71xx: add support for ZyXEL NBG6716 (#1443) 2018-06-22 20:21:11 +02:00
Sven Eckelmann
ef819cc196 ar71xx: add support for OpenMesh OM2P(-HS)v4 (#1426) 2018-06-09 13:55:38 +02:00
Sven Eckelmann
9d719a2e57 ar71xx: add support for OpenMesh A40/A60 (#1424) 2018-06-08 20:18:30 +02:00
Christoph Krapp
54ff903633 ar71xx: add support for TP-Link TL-WA901ND v5 (#1423) 2018-06-07 22:36:18 +02:00
Vincent Wiemann
33956cd4b3 ar71xx: add support for Alfa AP121F (#1404) 
Adds support for Alfa AP121F USB powered travel router (looks like an USB ethernet adapter).
There is no factory image, but only a sysupgrade file for this router which can be installed using the inbuilt UBoot web interface.
Configure your PC with IP address 192.168.1.2 and connect the router using its RJ45 port. Hold the reset button while powering the device until all LEDs have flashed 3 times simultaneously. You can now access the fallback web interface using a web browser at http://192.168.1.1 and flash the sysupgrade file.
 2018-05-23 19:32:40 +02:00
Christoph Krapp
68ee56b869 ar71xx: add support for GL.iNet GL-AR750 (#1395) 2018-05-17 22:33:18 +02:00
Christoph Krapp
eaa23aeae6 ar71xx: add support for TP-Link TL-WR940N v6 (#1389) 2018-05-17 01:33:52 +02:00
Andreas Ziegler
59d6b2a4ee ramips-rt305x: correct alphabetical order 2018-05-09 04:00:02 +02:00
Matthias Schiffer
5bd1d88f85
ar71xx-generic: make ubiquiti-rocket-m a separate device 
Make ubiquiti-rocket-m a separate device rather than a bullet-m alias to
enable USB support and allow adding devive-specific packages.
 2018-05-08 18:39:18 +02:00
David Bauer
22d45448fd ar71xx: add support for Fritz!Box 4020 
This commit adds support for the AVM Fritz!Box 4020 WiFi-router.

SoC:   Qualcomm Atheros QCA9561 (Dragonfly) 750MHz
RAM:   Winbond W971GG6KB-25
FLASH: Macronix MX25L12835F
WiFi:  QCA9561 b/g/n 3x3 450Mbit/s
USB:   1x USB 2.0
IN:    WPS button, WiFi button
OUT:   Power LED green, Internet LED green, WLAN LED green,
       LAN LED green, INFO LED green, INFO LED red
UART:  Header Next to Black metal shield
       Pinout is 3.3V - RX - TX - GND (Square Pad is 3.3V)
       The Serial setting is 115200-8-N-1.

Tested and working:
 - Ethernet (LAN + WAN)
 - WiFi (correct MAC)
 - Installation via EVA bootloader
 - OpenWRT sysupgrade
 - Buttons
 - LEDs

Not working:
 - USB port

Installation via EVA:
In the first seconds after Power is connected, the bootloader will
listen for FTP connections on 169.254.157.1 (Might also be 192.168.178.1). Firmware can be uploaded
like following:

  ftp> quote USER adam2
  ftp> quote PASS adam2
  ftp> binary
  ftp> debug
  ftp> passive
  ftp> quote MEDIA FLSH
  ftp> put openwrt-sysupgrade.bin mtd1

Note that this procedure might take up to two minutes. After transfer is
complete you need to powercycle the device to boot OpenWRT.

Signed-off-by: David Bauer <mail@david-bauer.net>
 2018-05-08 15:20:02 +02:00
Andreas Ziegler
1531571a7e targets/ipq806x: use ath10k-firmware-qca99x0-ct for 11s and remove BROKEN flag 2018-05-07 00:03:04 +02:00
Matthias Schiffer
a2eb50e0e6
x86: move common parts of x86-generic and x86-64 to include file 2018-04-26 22:59:36 +02:00
Matthias Schiffer
818acd6021
x86: remove bash and wget again 
Let's keep the default package selection to hardware support.
 2018-04-26 22:55:36 +02:00
Andreas Ziegler
563f351b78 x86: add packages: leds, sensors, gpio, usb, wifi and tools 2018-04-26 20:54:49 +02:00
Matthias Schiffer
02f905f542
ar71xx: build kernel modules used by Gluon into the kernel 
ar71xx-generic and -tiny benefit most from the optimized kernel, as they
contain all devices with 32MB RAM. We enable CONFIG_GLUON_SPECIALIZE_KERNEL
for all targets using the mips24_kc architecture so packages shared between
targets don't need to be rebuild all the time.
 2018-04-13 17:32:20 +02:00
Matthias Schiffer
d210cfcad9
generic: do not attempt to build kmod-usbip 
kmod-usbip is broken since the last kernel update.
 2018-04-10 20:25:38 +02:00
Andreas Ziegler
91912f4935 ar71xx-tiny: add support for TP-Link TL-WR940N v5 
adding an alias as it uses the same image as the TL-WR940N v4
 2018-03-19 23:34:45 +01:00
Jan-Tarek Butt
be286c4c69 ar71xx-generic: set unifi-ac-lr alias on ac-lite 2018-02-20 15:22:21 +01:00
Andreas Ziegler
4315ef7a1f sunxi: cleanup BROKEN flag formatting 2018-02-07 04:03:00 +01:00
Julian
167e1b34dc sunxi: LeMaker Banana Pi: remove BROKEN (#1325) 2018-02-06 18:24:46 +01:00
Vincent Wiemann
273a60fe62 ramips-mt7621: Add support for ZBT-WG3526-32M (#1296) 
including backport of mtd patches.

The general flash issue (32MB) was discussed here:
https://gist.github.com/dmke/d389bc364b3f73f525076eaee0019dc1
The resulting patch was the following:
http://lists.infradead.org/pipermail/linux-mtd/2016-December/070889.html

Another patch by nbd168 added the required mtd read operations for supporting ZBT-WG3526-32M:
https://github.com/lede-project/source/commit/22d982e#diff-3835f027e16e6416090c1833bc732af3
 2018-02-04 17:42:48 +01:00
Matthias Schiffer
87ced3c5c6
modules: update LEDE 
b1205a9211 ar71xx: /lib/ar71xx.sh: add model detection for TP-Link TL-WR810N
fbeae9d891 iptables: make kmod-ipt-debug part of default ALL build
6ea9a702c5 iptables: Fix target TRACE issue
00fa1e4108 curl: fix libcurl/mbedtls async interface
d5278cc48b kernel: bump 4.4 to 4.4.112 for 17.01
2ae0741f3b dnsmasq: backport validation fix in dnssec security fix
58d60bd283 dnsmasq: backport dnssec security fix for 17.01
d626aa005b mountd: bump to git HEAD version
f0336975be kernel: bump 4.4 to 4.4.111 for 17.01
fb6f21c657 kmod-sched-cake: bump to latest cake bake for 17.01
2e8a3bb35f ar71xx: Netgear WNR2000v4: do not include USB packages [17.01]
3fa86282fa build: fix restoring /etc/opkg with PER_DEVICE_ROOTFS
987a7e3175 ramips: fix lenovo newifi-y1 switch and LED config
dbb5ffaed5 ramips: firewrt: indicate boot status via LED
 2018-02-03 14:17:29 +01:00
Matthias Schiffer
ff073f55d8
Merge pull request #1318 from rotanid/target-cleanup 
target files cleanup: variable checks and comments
 2018-01-27 13:04:15 +01:00
Andreas Ziegler
e9362cb724 targets: update & cleanup reasons for BROKEN flags 2018-01-26 14:17:44 +01:00
Andreas Ziegler
e92140c593 targets: remove check if ATH10K_PACKAGES is set 
as GLUON_WLAN_MESH now is set by default, ATH10K_PACKAGES is set by default, too
 2018-01-26 14:17:35 +01:00
Matthias Schiffer
07dbfea617
gluon-site: disable multidomain support by default 2018-01-26 12:32:46 +01:00
Matthias Schiffer
faceb3932c
config: check if GLUON_DEBUG is 1 rather than nonempty 2018-01-26 12:32:46 +01:00
Andreas Ziegler
a99fdf7919 ramips-mt7621: Netgear WNDR3700v5 has no factory image 
fixes build after 3ec63b8c
 2018-01-26 01:45:49 +01:00
Andreas Ziegler
d586720c5c ar71xx-generic: add support for Ubiquiti NanoBeam M5 
marked as BROKEN for now as it is untested

related issue: #1099
 2018-01-20 15:38:49 +01:00
Andreas Ziegler
c4e3cca1d3 ar71xx-tiny: add support for TP-Link TL-WR802N v1 
marked as BROKEN for now as it is untested
 2018-01-19 23:47:36 +01:00
Andreas Ziegler
708aae5015 ar71xx-generic: add support for TP-Link TL-WR810N 
marked as BROKEN for now as it is untested
 2018-01-19 23:47:31 +01:00
Andreas Ziegler
3ec63b8c70 ar71xx-generic: add support for Netgear WNDR3700v5 
fixes #442
 2018-01-19 20:45:29 +01:00
David Bauer
99b02701cc ar71xx: add support for TP-Link Archer C58/C59/C60 (#1281) 2018-01-16 18:51:12 +01:00
Andreas Ziegler
fb93c3b259 ar71xx: correct model name for TL-WR1043N v5, fixes #1307 2018-01-16 18:30:37 +01:00
Tata
919dda90b3 build: introduce GLUON_WLAN_MESH build variable (#1298) 
defaults to 11s, allowing to build devices without IBSS-support

obsoletes GLUON_ATH10K_MESH
 2018-01-10 15:49:33 +01:00
David Bauer
9273e56c63 ar71xx: add support for TP-Link Archer C7 v4 (#1289) 2018-01-03 16:50:23 +01:00
Jan-Tarek Butt
f514ec13b5
brcm2708-bcm2709: add manifest_alias for raspberry-pi-2-model-b-rev-1.1 2017-12-27 03:06:19 +01:00
Jan-Tarek Butt
7b61cb16f8
brcm2708-bcm2708: add manifest_alias for raspberry-pi-model-b-rev-2 
Signed-off-by: Jan-Tarek Butt <tarek@ring0.de>
 2017-12-27 03:05:53 +01:00
David Bauer
70784cb3b2 ar71xx: add support for TP-Link TL-WR1043N v5 (#1279) 2017-12-19 04:22:44 +01:00
Steffen Förster
9136562517 ramips-rt305x: add D-Link DIR-615 rev D1-D4 2017-12-08 00:00:35 +01:00
kb-light
17d1c65610
ramips-mt7621: do not tag ubnt-erx(-sfp) as broken 
There is no wifi, so there is no bad wifi.

[Matthias Schiffer: rebase onto master]
 2017-11-26 12:46:20 +01:00
Karsten Böddeker
64cfd648cb
ramips-mt7621: add support for UBNT EdgeRouter X-SFP 
[Matthias Schiffer: remove patch "ramips: simplify ubnt-erx-sfp device
definition", as it depends on other patches that have not been backported]
 2017-11-26 12:44:52 +01:00
Andreas Ziegler
1ca402ee46 ramips-mt7621: ZBT-WG3526 has no factory image 2017-11-23 03:09:03 +01:00
Andreas Ziegler
14ef0387ea ramips-mt7621: add ZBT-WG3526 2017-11-23 03:05:58 +01:00
Andreas Ziegler
a040ec0083
ar71xx: add TP-Link Archer C25 (#1238) 
BROKEN because of stability issues with 5GHz enabled.
 2017-10-22 01:43:20 +02:00
Matthias Schiffer
08cbbf9925
build: move all generic config generation to targets/generic 
As the default package list is now handled using the 'packages' directive,
explicit wpad-mini removals in target definitions can be dropped.
 2017-09-07 03:21:42 +02:00
Matthias Schiffer
587c5016cb
build: handle generic and target-specific config in the same run of target_config{,_check}.sh 
This, together with a new try_config directive, will allow checking the
generic config and make it more flexible.
 2017-09-07 00:17:57 +02:00
Steffen Förster
b325f00599
ramips-mt7620: add new subtarget with some Gl.Inet devices 2017-09-06 20:58:51 +02:00
hexa-
c3c6ea0cd7 brcm2708: drop wpad-mini as it clashes with hostapd-mini (#1205) 2017-08-13 21:43:57 +02:00
Steffen Förster
e395284156 brcm2708: add target and platform for raspi3 (#1204) 
This device has built in wifi we should include it at least for experiments.
 2017-08-13 15:53:11 +02:00
Matthias Schiffer
085cf0debf
ar71xx-generic: add alias for Ubiquiti UniFi Mesh 
Fixes #1021
 2017-08-08 12:08:09 +02:00
Linus Lüssing
23a8947628
Revert "generic: batman-adv: disable multicast optimizations for now" 
This reverts commit 819758f425.

A proper fix is now available, therefore reverting this workaround.
 2017-08-07 22:07:14 +02:00
Matthias Schiffer
6e039911ab
generic: don't explicitly enable busybox sha256sum applet 
LEDE has sha256sum enabled by default.
 2017-07-03 03:49:03 +02:00
Matthias Schiffer
102f6a7244
Revert "generic: busybox: enable sha512sum to workaround segfault issue" 
This reverts commit dcff68029e.
 2017-07-03 01:45:21 +02:00
Matthias Schiffer
86636c3ae6
ramips-rt305x: add D-Link DIR-615 H1 
Fixes #1164
 2017-06-29 18:28:16 +02:00
Florian Beier
1690b51d21 ar71xx-generic: add support for GL.INet GL-AR300M (#1163) 2017-06-27 02:31:39 +02:00
Matthias Schiffer
819758f425
generic: batman-adv: disable multicast optimizations for now 
A bug in batman-adv can lead to a large amount of management traffic being
exchanged between nodes when the multicast optimizations are enabled,
effectively making the mesh unusable. It's safer to disable the feature
for now, until we have a real fix.
 2017-06-26 14:37:13 +02:00
David Lutz
93c6cf1506 ramips-rt305x: Add support for A5-V11 (#1151) 2017-06-23 13:23:31 +02:00
Matthias Schiffer
dcff68029e
generic: busybox: enable sha512sum to workaround segfault issue 
sha512sum doesn't add much code that is not also used by sha256sum, but the
change of the configuration hides the segfault issue described in:

  https://bugs.lede-project.org/index.php?do=details&task_id=822

While the issue only seemed to affect dhcpv6.script, it would clutter /tmp
with coredumps, eventually leading to OOM.
 2017-06-23 13:12:46 +02:00
Matthias Schiffer
869ceb425c
x86-generic: add manifest aliases for x86-kvm and x86-xen_domu 
Allow the autoupdater to work when updating from the removed targets.
 2017-06-13 12:21:03 +02:00
Matthias Schiffer
9b687332d3
ar71xx-generic: remove CPE220/CPE520 1.0 devices 
These devices have never actually existed; the corresponding support
strings have been removed from the stock firmwares as well.
 2017-06-07 15:22:18 +02:00
Matthias Schiffer
aabe0dd41d
ar71xx-tiny: add TP-Link TL-WA701N/ND v2 again 
It seems the device was lost during the OpenWrt -> LEDE migration.
 2017-06-07 15:20:12 +02:00
Matthias Schiffer
009162134a
ramips-mt7621: add support for UBNT EdgeRouter X 2017-06-06 16:34:04 +02:00
Matthias Schiffer
88f2e3e4e2
Revert "generic: revert to OpenWrt CC partition sizes on x86 and similar images for now" 
This reverts commit fcce9e5295.

The x86-generic kernel does not fit into 4MB.
 2017-06-01 21:10:01 +02:00
Matthias Schiffer
fcce9e5295
generic: revert to OpenWrt CC partition sizes on x86 and similar images for now 
This will allow upgrading using the broken sysupgrade scripts in OpenWrt
CC without losing the configuration.

Fixes #1010
 2017-05-30 03:28:31 +02:00
Matthias Schiffer
ad91ab1be7
build: don't copy packages to output directory for targets without opkg 
Fixes #1126
 2017-05-15 23:23:02 +02:00
Steffen Förster
373613bb54 ar71xx-generic: add profile for UBNT Airgateway Pro and alias for UBNT Airgateway LR (#1107) 
The Airgateway LR is the same device as the normal Airgateway but with an detachable antenna. The Pro version is a cheap dual band device.
 2017-04-27 04:15:13 +02:00
Matthias Schiffer
6c053d92b8
ar71xx-tiny: add support for TP-Link TL-WR841N/ND v12 2017-04-20 16:59:55 +02:00
bobcanthelpyou
82f5afd09d
ar71xx-tiny: add TP LINK TL-WA730RE v1 2017-04-16 16:26:24 +02:00
Malte Möller
ad9878be9d ar71xx-generic: add Support for TP Link RE450 (#1092) 
Fixes #1084

Hardware is very similar to Archer C5v1 and C7v2.

Tested factory install and autoupdater.

IBSS Mesh on 2.4 and 5 GHz is working fine.

The only Ethernet Port is used for config mode and afterwards handled
as WAN Port.
 2017-04-13 02:01:19 +02:00
Matthias Schiffer
57070a56be
ipq806x: add new target and support for TP-Link Archer C2600 
Completely untested for now.

Closes #835
 2017-03-27 11:44:07 +02:00
Tarnatos
d3d1059149 ar71xx: more consistent image file names for TP-Link TL-WR940N (#1071) 
The TL-WR940N doesn't have detachable antennas. Make v1-v3 match v4.
 2017-03-23 12:40:46 +01:00
hexa-
1c9b0ced00 bcm2708: prevent wpad-mini from conflicting with hostapd-mini (#1065) 2017-03-10 15:31:20 +01:00
0x4A6F
ebeefa1747 ar71xx-generic: add support for Ubiquiti Rocket M Titanium (#968) 2017-03-01 13:21:28 +01:00
Matthias Schiffer
a70462ff18
Update Gluon packages 
Switch sha512sum to sha256sum to match updated autoupdater.
 2017-02-25 01:28:07 +01:00
Julian
6d77065263 mvebu: remove wpad-mini (#1056) 2017-02-24 15:19:16 +01:00
Matthias Schiffer
0af0be0673
ar71xx-generic: don't try to build a factory image for D-Link DIR-825 B1 
The size of the factory images is limited to 4MB, which caused build
failures when many additional packages were included.

Rather than moving the device to ar71xx-tiny, we ignore the factory images
and just build the sysupgrade. This way, the whole flash is usable for
Gluon.

This means that installing Gluon on these devices will now require to flash
a plain LEDE image first, and then upgrading using the Gluon sysupgrade
image.

Fixes #1020
 2017-02-24 01:50:17 +01:00
Matthias Schiffer
31d3f08f25
treewide: convert all LuCI-based packages to gluon-web 2017-02-22 01:31:25 +01:00
Matthias Schiffer
08994ae8c0
ar71xx-tiny: fix image name for TL-WR940N v4 
To fix the autoupdater.
 2017-02-21 20:54:36 +01:00
txt.file
1fdaee080a ar71xx-generic: add support for TP-Link TL-WA7210N (#1029) 2017-02-21 09:42:30 +01:00
Matthias Schiffer
b4ccb1fa95
ar71xx-mikrotik: update device definitions 2017-02-12 07:15:16 +01:00
Matthias Schiffer
31ee7be16d
x86-xen_domu: remove 
Remove obsolete x86-xen_domu definition, it has been merged into
x86-generic.
 2017-02-12 05:11:10 +01:00
Christof Schulze
b40d94111e build: add GLUON_DEBUG flag, if enabled set CONFIG_DEBUG and do not strip binaries (#1028) 2017-02-11 23:33:07 +01:00
Steffen Förster
b8dc1a784a ramips-mt7628: add new platform and vocore2 (#1027) 2017-02-09 02:07:00 +01:00
Steffen Förster
fb05aef96b
x86-geode: add target for Geode CPUs 2017-02-03 22:47:14 +01:00
Matthias Schiffer
8ea481edea
x86: add kmod-8139cp by default 
Fixes #1022
 2017-02-03 22:35:56 +01:00
Matthias Schiffer
78b2775eec
Use LEDE as base for Gluon 2017-01-18 17:21:43 +01:00
Matthias Schiffer
850499fdb3
ar71xx-generic: mark Meraki devices as BROKEN again 
These devices don't have unique MAC addresses with OpenWrt/LEDE at the moment
(see #993).
 2017-01-09 23:06:09 +01:00
kb-light
d3bc378536 ar71xx-generic: TP-Link WBS210/510: remove BROKEN (#1002) 2017-01-09 22:25:16 +01:00
Matthias Schiffer
99471f8d5d
ar71xx-generic: add support for TP-Link WBS210/510 (untested) 
Closes #844
 2017-01-06 12:02:32 +01:00
Matthias Schiffer
bee999dd90
ar71xx-generic: backport support for TP-LINK TL-WR1043ND v4 
Fixes #961
 2016-12-22 00:01:55 +01:00
David Lutz
ef39158ed1
ar71xx-generic: add Support for TP-LINK TL-WR940N v4 2016-12-13 01:31:43 +01:00
Matthias Schiffer
61de5b8841
mvebu: fix comment about BROKEN status 2016-12-12 15:02:45 +01:00
Julian Labus
5b10928ce0
mvebu: add missing package uboot-envtools which is needed for sysupgrade 2016-12-12 15:02:11 +01:00
Matthias Schiffer
1677b62e4b
ar71xx: fix LEDs for TL-WA801ND v3, remove BROKEN 2016-12-06 19:01:46 +01:00
Julian
a9e29725c0 Add support for mvebu target (#964) 2016-12-05 10:45:05 +01:00
Neal Oakey
9223639ffe ar71xx-generic: make UBNT image names consistent (#809) 2016-11-29 23:11:50 +01:00
Matthias Schiffer
5ef3d883a5
ar71xx-generic: backport region code support for TP-Link TL-WR841ND v11 2016-11-11 03:45:49 +01:00
Andreas Ziegler
9fba8d7a64 x86: include kmod-igb, kmod-sky2 and kmod-tulip into generic and 64 subtargets 2016-11-06 15:07:06 +01:00
Andreas Ziegler
dbc6fe70d7 x86: sort network packages alphabetically 2016-11-06 15:06:24 +01:00
Matthias Schiffer
a606b32b17
ar71xx-generic: set region code for TL-WA901ND v4 and remove BROKEN 
Tested-by: Jannis Pinter <jannis@pinterjann.is>
 2016-10-15 19:11:35 +02:00
Matthias Schiffer
2432373f5f
ar71xx-generic: allow choosing the ath10k firmware branch in site.mk 
The GLUON_ATH10K_MESH must be set to 11s or ibss; when it is not set,
ath10k device images won't be built at all. This also allows us to remove
the BROKEN flag for ath10k devices, as the GLUON_ATH10K_MESH variable is
sufficient to avoid ath10k devices if desired.

Fixes #864
 2016-09-09 03:02:40 +02:00
Sven Eckelmann
d3811bb2bf ar71xx-generic: Mark MR1750 and OM5P-AC devices as BROKEN (#878) 
The MR1750 and OM5P-AC devices are based on ath9k SoCs and an external
ath10k chip. All devices which are using ath10k should be marked as broken
due to deficits in their IBSS support.

Signed-off-by: Sven Eckelmann <sven.eckelmann@open-mesh.com>
 2016-09-07 17:56:04 +02:00
Steffen Förster
7fd1d0d62e ar71xx-generic: add support for ALFA N2 and N5 (#871) 
+ added profile for these devices
+ added entry in the docs for these devices plus the missing alfa tube
 2016-08-30 12:18:35 +02:00
Matthias Schiffer
639c12b8e2
ar71xx-generic: add support for new TP-Link region codes 
Generate flashable images for the Archer C7 v2 with current stock firmware
again.

To set the region code, the GLUON_REGION variable must be set to "us" or
"eu" in site.mk or as a make argument.

Fixes #860
 2016-08-28 21:03:56 +02:00
Matthias Schiffer
1c6256907b
ar71xx-generic: add support for TL-WA801ND v3 (untested) 
Fixes #800
 2016-08-23 00:26:51 +02:00
Matthias Schiffer
61cde569ad
ar71xx: backport fixes for better CPE210/510 support (again) 
This patchset enables the RX LNA for the CPE210/510, improving RX by about
20dB. The profiles for CPE210 and CPE510 is split into two images.

The problematic patch switching the CPE510 to the secondary ART is left
out.
 2016-08-22 18:42:33 +02:00
Simon Wunderlich
655498889b ar71xx-generic: remove broken mark for wr842n-v3 (#859) 
I've bought a couple of those devices from Senetic GmbH.

https://www.senetic.de/product/TL-WR842N

They have 16 MB of Flash and 64 MB of RAM. Platform support works fine,
I've also tested a little with Ethernet (since I saw some regressions on
OpenWRT/LEDE with 841v11), no problems.

Therefore, lets remove the broken mark.

Signed-off-by: Simon Wunderlich <sw@simonwunderlich.de>
 2016-08-22 16:15:08 +02:00
Sprinterfreak
74f4a9380a ar71xx-generic: verified Tube2h, remove BROKEN (#847) 2016-08-08 11:55:37 +02:00
Jannis Pinter
f103ee244f Add support for Buffalo WZR-HP-G300NH2 (#836) 
Add Buffalo WZR-HP-G300NH2 to Makefile, device is already supported in OpenWrt and LEDE.
Verified functionality with actual device.
 2016-07-29 15:28:28 +02:00
Matthias Schiffer
0c63fc466e
ar71xx-generic: fix Tube2H profile 2016-07-27 13:19:01 +02:00
Matthias Schiffer
0b0550c30f
ar71xx-generic: fix names of ALFA products 
Fixes autoupdater for Hotnet-UB and AP121. Also add note about broken
autoupdates on Tube2H.
 2016-07-27 01:42:59 +02:00
Sprinterfreak
7a03c09e55 ar71xx-generic: add support for ALFA Networks Tube2H (#828) 2016-07-25 15:53:03 +02:00
Matthias Schiffer
91881f45dc
mac80211: update to LEDE 6c2651566cce8f5b3a3d3b976439dee2bac5e07e 
Also switch to kmod-ath10k-ct, so we can drop our AP+IBSS patch.
 2016-07-19 22:39:24 +02:00
Matthias Schiffer
267b9bd018
ar71xx-generic: add support for TP-Link TL-WR842N/ND v3 (untested) 2016-07-03 22:27:38 +02:00
Matthias Schiffer
634997ec87
Add target ramips-mt7621 with model D-Link DIR-860L B1 
Needs more testing, high packet loss at the moment.
 2016-07-03 21:56:32 +02:00
Matthias Schiffer
6b644df4ae
brcm2708-*: remove BROKEN 2016-06-29 16:50:54 +02:00
Christian Tramnitz
fb8c7a8baf sunxi: add Banana Pro (#802) 
build-tested with 2016.1.4, boots but packet loss on eth0
omitted ata due to build errors
 2016-06-23 01:05:54 +02:00
Matthias Schiffer
bae721a9bb
Add target ar71xx-mikrotik 
Fixes #121

Based-on-patch-by: Tobias Hachmer <tobias@hachmer.de>
 2016-06-23 00:29:28 +02:00
Sven Eckelmann
fa04fff88d ar71xx-generic: Add support for OpenMesh MR1750v2 
The new MR1750v2 device support is only available in LEDE master. The
relevant patches have to backported to add support for them in Gluon

Signed-off-by: Sven Eckelmann <sven.eckelmann@open-mesh.com>
 2016-06-17 20:04:00 +02:00
Sven Eckelmann
3ccd516971 ar71xx-generic: Add support for OpenMesh OM2P-HSv3 
The new OM2P-HSv3 device support is only available in LEDE master. The
relevant patches have to backported to add support for them in Gluon

Signed-off-by: Sven Eckelmann <sven.eckelmann@open-mesh.com>
 2016-06-17 20:04:00 +02:00