bobcanthelpyou
82f5afd09d
ar71xx-tiny: add TP LINK TL-WA730RE v1
2017-04-16 16:26:24 +02:00
Malte Möller
ad9878be9d
ar71xx-generic: add Support for TP Link RE450 ( #1092 )
...
Fixes #1084
Hardware is very similar to Archer C5v1 and C7v2.
Tested factory install and autoupdater.
IBSS Mesh on 2.4 and 5 GHz is working fine.
The only Ethernet Port is used for config mode and afterwards handled
as WAN Port.
2017-04-13 02:01:19 +02:00
Matthias Schiffer
57070a56be
ipq806x: add new target and support for TP-Link Archer C2600
...
Completely untested for now.
Closes #835
2017-03-27 11:44:07 +02:00
Tarnatos
d3d1059149
ar71xx: more consistent image file names for TP-Link TL-WR940N ( #1071 )
...
The TL-WR940N doesn't have detachable antennas. Make v1-v3 match v4.
2017-03-23 12:40:46 +01:00
hexa-
1c9b0ced00
bcm2708: prevent wpad-mini from conflicting with hostapd-mini ( #1065 )
2017-03-10 15:31:20 +01:00
0x4A6F
ebeefa1747
ar71xx-generic: add support for Ubiquiti Rocket M Titanium ( #968 )
2017-03-01 13:21:28 +01:00
Matthias Schiffer
a70462ff18
Update Gluon packages
...
Switch sha512sum to sha256sum to match updated autoupdater.
2017-02-25 01:28:07 +01:00
Julian
6d77065263
mvebu: remove wpad-mini ( #1056 )
2017-02-24 15:19:16 +01:00
Matthias Schiffer
0af0be0673
ar71xx-generic: don't try to build a factory image for D-Link DIR-825 B1
...
The size of the factory images is limited to 4MB, which caused build
failures when many additional packages were included.
Rather than moving the device to ar71xx-tiny, we ignore the factory images
and just build the sysupgrade. This way, the whole flash is usable for
Gluon.
This means that installing Gluon on these devices will now require to flash
a plain LEDE image first, and then upgrading using the Gluon sysupgrade
image.
Fixes #1020
2017-02-24 01:50:17 +01:00
Matthias Schiffer
31d3f08f25
treewide: convert all LuCI-based packages to gluon-web
2017-02-22 01:31:25 +01:00
Matthias Schiffer
08994ae8c0
ar71xx-tiny: fix image name for TL-WR940N v4
...
To fix the autoupdater.
2017-02-21 20:54:36 +01:00
txt.file
1fdaee080a
ar71xx-generic: add support for TP-Link TL-WA7210N ( #1029 )
2017-02-21 09:42:30 +01:00
Matthias Schiffer
b4ccb1fa95
ar71xx-mikrotik: update device definitions
2017-02-12 07:15:16 +01:00
Matthias Schiffer
31ee7be16d
x86-xen_domu: remove
...
Remove obsolete x86-xen_domu definition, it has been merged into
x86-generic.
2017-02-12 05:11:10 +01:00
Christof Schulze
b40d94111e
build: add GLUON_DEBUG flag, if enabled set CONFIG_DEBUG and do not strip binaries ( #1028 )
2017-02-11 23:33:07 +01:00
Steffen Förster
b8dc1a784a
ramips-mt7628: add new platform and vocore2 ( #1027 )
2017-02-09 02:07:00 +01:00
Steffen Förster
fb05aef96b
x86-geode: add target for Geode CPUs
2017-02-03 22:47:14 +01:00
Matthias Schiffer
8ea481edea
x86: add kmod-8139cp by default
...
Fixes #1022
2017-02-03 22:35:56 +01:00
Matthias Schiffer
78b2775eec
Use LEDE as base for Gluon
2017-01-18 17:21:43 +01:00
Matthias Schiffer
850499fdb3
ar71xx-generic: mark Meraki devices as BROKEN again
...
These devices don't have unique MAC addresses with OpenWrt/LEDE at the moment
(see #993 ).
2017-01-09 23:06:09 +01:00
kb-light
d3bc378536
ar71xx-generic: TP-Link WBS210/510: remove BROKEN ( #1002 )
2017-01-09 22:25:16 +01:00
Matthias Schiffer
99471f8d5d
ar71xx-generic: add support for TP-Link WBS210/510 (untested)
...
Closes #844
2017-01-06 12:02:32 +01:00
Matthias Schiffer
bee999dd90
ar71xx-generic: backport support for TP-LINK TL-WR1043ND v4
...
Fixes #961
2016-12-22 00:01:55 +01:00
David Lutz
ef39158ed1
ar71xx-generic: add Support for TP-LINK TL-WR940N v4
2016-12-13 01:31:43 +01:00
Matthias Schiffer
61de5b8841
mvebu: fix comment about BROKEN status
2016-12-12 15:02:45 +01:00
Julian Labus
5b10928ce0
mvebu: add missing package uboot-envtools which is needed for sysupgrade
2016-12-12 15:02:11 +01:00
Matthias Schiffer
1677b62e4b
ar71xx: fix LEDs for TL-WA801ND v3, remove BROKEN
2016-12-06 19:01:46 +01:00
Julian
a9e29725c0
Add support for mvebu target ( #964 )
2016-12-05 10:45:05 +01:00
Neal Oakey
9223639ffe
ar71xx-generic: make UBNT image names consistent ( #809 )
2016-11-29 23:11:50 +01:00
Matthias Schiffer
5ef3d883a5
ar71xx-generic: backport region code support for TP-Link TL-WR841ND v11
2016-11-11 03:45:49 +01:00
Andreas Ziegler
9fba8d7a64
x86: include kmod-igb, kmod-sky2 and kmod-tulip into generic and 64 subtargets
2016-11-06 15:07:06 +01:00
Andreas Ziegler
dbc6fe70d7
x86: sort network packages alphabetically
2016-11-06 15:06:24 +01:00
Matthias Schiffer
a606b32b17
ar71xx-generic: set region code for TL-WA901ND v4 and remove BROKEN
...
Tested-by: Jannis Pinter <jannis@pinterjann.is>
2016-10-15 19:11:35 +02:00
Matthias Schiffer
2432373f5f
ar71xx-generic: allow choosing the ath10k firmware branch in site.mk
...
The GLUON_ATH10K_MESH must be set to 11s or ibss; when it is not set,
ath10k device images won't be built at all. This also allows us to remove
the BROKEN flag for ath10k devices, as the GLUON_ATH10K_MESH variable is
sufficient to avoid ath10k devices if desired.
Fixes #864
2016-09-09 03:02:40 +02:00
Sven Eckelmann
d3811bb2bf
ar71xx-generic: Mark MR1750 and OM5P-AC devices as BROKEN ( #878 )
...
The MR1750 and OM5P-AC devices are based on ath9k SoCs and an external
ath10k chip. All devices which are using ath10k should be marked as broken
due to deficits in their IBSS support.
Signed-off-by: Sven Eckelmann <sven.eckelmann@open-mesh.com>
2016-09-07 17:56:04 +02:00
Steffen Förster
7fd1d0d62e
ar71xx-generic: add support for ALFA N2 and N5 ( #871 )
...
+ added profile for these devices
+ added entry in the docs for these devices plus the missing alfa tube
2016-08-30 12:18:35 +02:00
Matthias Schiffer
639c12b8e2
ar71xx-generic: add support for new TP-Link region codes
...
Generate flashable images for the Archer C7 v2 with current stock firmware
again.
To set the region code, the GLUON_REGION variable must be set to "us" or
"eu" in site.mk or as a make argument.
Fixes #860
2016-08-28 21:03:56 +02:00
Matthias Schiffer
1c6256907b
ar71xx-generic: add support for TL-WA801ND v3 (untested)
...
Fixes #800
2016-08-23 00:26:51 +02:00
Matthias Schiffer
61cde569ad
ar71xx: backport fixes for better CPE210/510 support (again)
...
This patchset enables the RX LNA for the CPE210/510, improving RX by about
20dB. The profiles for CPE210 and CPE510 is split into two images.
The problematic patch switching the CPE510 to the secondary ART is left
out.
2016-08-22 18:42:33 +02:00
Simon Wunderlich
655498889b
ar71xx-generic: remove broken mark for wr842n-v3 ( #859 )
...
I've bought a couple of those devices from Senetic GmbH.
https://www.senetic.de/product/TL-WR842N
They have 16 MB of Flash and 64 MB of RAM. Platform support works fine,
I've also tested a little with Ethernet (since I saw some regressions on
OpenWRT/LEDE with 841v11), no problems.
Therefore, lets remove the broken mark.
Signed-off-by: Simon Wunderlich <sw@simonwunderlich.de>
2016-08-22 16:15:08 +02:00
Sprinterfreak
74f4a9380a
ar71xx-generic: verified Tube2h, remove BROKEN ( #847 )
2016-08-08 11:55:37 +02:00
Jannis Pinter
f103ee244f
Add support for Buffalo WZR-HP-G300NH2 ( #836 )
...
Add Buffalo WZR-HP-G300NH2 to Makefile, device is already supported in OpenWrt and LEDE.
Verified functionality with actual device.
2016-07-29 15:28:28 +02:00
Matthias Schiffer
0c63fc466e
ar71xx-generic: fix Tube2H profile
2016-07-27 13:19:01 +02:00
Matthias Schiffer
0b0550c30f
ar71xx-generic: fix names of ALFA products
...
Fixes autoupdater for Hotnet-UB and AP121. Also add note about broken
autoupdates on Tube2H.
2016-07-27 01:42:59 +02:00
Sprinterfreak
7a03c09e55
ar71xx-generic: add support for ALFA Networks Tube2H ( #828 )
2016-07-25 15:53:03 +02:00
Matthias Schiffer
91881f45dc
mac80211: update to LEDE 6c2651566cce8f5b3a3d3b976439dee2bac5e07e
...
Also switch to kmod-ath10k-ct, so we can drop our AP+IBSS patch.
2016-07-19 22:39:24 +02:00
Matthias Schiffer
267b9bd018
ar71xx-generic: add support for TP-Link TL-WR842N/ND v3 (untested)
2016-07-03 22:27:38 +02:00
Matthias Schiffer
634997ec87
Add target ramips-mt7621 with model D-Link DIR-860L B1
...
Needs more testing, high packet loss at the moment.
2016-07-03 21:56:32 +02:00
Matthias Schiffer
6b644df4ae
brcm2708-*: remove BROKEN
2016-06-29 16:50:54 +02:00
Christian Tramnitz
fb8c7a8baf
sunxi: add Banana Pro ( #802 )
...
build-tested with 2016.1.4, boots but packet loss on eth0
omitted ata due to build errors
2016-06-23 01:05:54 +02:00
