nils/gluon
1
0
Fork 0
Code Issues Pull Requests Packages Projects Releases Wiki Activity
183 Commits 26 Branches 63 Tags 18 MiB
4cf9b23e02
Commit Graph

183 Commits

This Branch
This Branch
All Branches
Author SHA1 Message Date
Matthias Schiffer
f9cb8a7258 gluon-mesh-batman-adv: move wifi config to invariant 2014-01-20 00:06:55 +01:00
Matthias Schiffer
59c1900e9a gluon-location: move information to /etc/config/gluon-location 2014-01-20 00:06:55 +01:00
Matthias Schiffer
1dd9a9a8a1 gluon-autoupdater: no need to provide a default config just to delete it in the initial script 2014-01-20 00:06:55 +01:00
Nils Schneider
8e73ff90a0 gluon-autoupdater: typo corrected 2014-01-19 23:19:55 +01:00
Nils Schneider
4fef2e5e11 Merge pull request #7 from FreifunkBremen/master 
gluon-autoupdater: get random number from /dev/urandom
 2014-01-19 13:40:13 -08:00
Jan-Philipp Litza
7cdf3708f0 gluon-autoupdater: get random number from urandom 
The approach with awk's rand() wasn't really random between across
devices: When srand() was called without arguments, time() was used as
seed, which of course is the same on all devices when the script is
called via cron at HH:00:00.

This patch instead uses /dev/urandom as source of random (we don't need
cryptographically strong random numbers, so urandom is just fine) but
still uses awk for the comparison as busybox's ash cannot deal with
floats in $(())
 2014-01-19 22:36:49 +01:00
Matthias Schiffer
086efed428 gluon-alfred: add chosen gateway and load average 2014-01-19 21:44:26 +01:00
Matthias Schiffer
74493b2ba5 gluon-alfred: run every minute 
The run frequency and exact time affect the alfred announce interval, so we can
just run it every minute to supply alfred with the most up-to-date data.
 2014-01-18 21:56:05 +01:00
Matthias Schiffer
8b4474e18f gluon-mesh-batman-adv: set gateway mode to client 2014-01-18 19:44:02 +01:00
Jan-Philipp Litza
54620d6231 autoupdater: Use awk instead of grep+head+tail to split manifest 2014-01-17 16:09:34 +01:00
Matthias Schiffer
4ca8a35fc9 gluon-mesh-batman-adv: set bat0 MAC address to primary address 2014-01-16 23:57:42 +01:00
Jan-Philipp Litza
4b61062636 alfred: add more traffic statistics 
+ mgmt and forward counters
+ packet in addition to byte counters for everything
 2014-01-16 23:47:41 +01:00
Jan-Philipp Litza
7fdd0300b2 alfred: Add --no-sleep option to send immediately 2014-01-16 23:46:54 +01:00
Jan-Philipp Litza
692f093d21 alfred: clean up delay code 2014-01-16 22:42:02 +01:00
Jan-Philipp Litza
cc2ef851c7 alfred: add random node-specific delay before sending 2014-01-16 22:36:09 +01:00
Jan-Philipp Litza
50782f759e alfred: make traffic counters absolute 
After a lenghty discussion, we settled on absolute vs. relative values.
Main reasons:

* stateless implementation on node possible
* convertable to relative values by differentiaion on receiver
* missed transmissions only decrease granularity, whereas relative
  values would introduce wrong numbers on integration if values are
  missed
 2014-01-16 22:34:57 +01:00
Jan-Philipp Litza
6bf44622dc alfred: add statistics (uptime+traffic) 2014-01-16 16:50:25 +01:00
Matthias Schiffer
72b27ea2e0 gluon-mesh-vpn-fastd: enable secure handshakes 2014-01-14 19:37:15 +01:00
Matthias Schiffer
1c9dec091e gluon-radvd: don't run as root 2014-01-14 19:34:07 +01:00
Matthias Schiffer
5241565a79 gluon-mesh-vpn-fastd: don't run as root 2014-01-14 18:46:17 +01:00
Matthias Schiffer
3275c92f72 gluon-core: add function to add users 2014-01-14 18:19:51 +01:00
Matthias Schiffer
f99767fb9f Add firewall rules 
gluon-mesh-batman-adv should not be used without firewall to prevent forwarding
of packets from the mesh to the wan interface.

For some reason, the firewall package won't work at all without
kmod-ipt-nathelper.
 2014-01-14 01:50:59 +01:00
Matthias Schiffer
1cf4d41cba gluon-config-mode: use different document root 2014-01-13 20:17:29 +01:00
Matthias Schiffer
d204b0e24f Remove initscript enable/disable hacks 
Better configure these properly.
 2014-01-13 18:29:00 +01:00
Matthias Schiffer
604e3caceb gluon-mesh-batman-adv: disable client interface in dnsmasq 2014-01-13 18:02:45 +01:00
Jan-Philipp Litza
a3f2eb6bc7 alfred: name -> hostname 2014-01-13 17:11:41 +01:00
Jan-Philipp Litza
59616e8d77 alfred: improved readability 2014-01-13 17:09:15 +01:00
Jan-Philipp Litza
e901ceda71 alfred: split up firmware info, include fastd version+status 2014-01-13 17:06:47 +01:00
Jan-Philipp Litza
d0e3cbc8bc alfred: added more information to send, reformatted location 
location is object with latitude and longitude
added:
* firmware
* autoupdater status
* hardware model
* primary mac address
* mesh IPv6 addresses
 2014-01-13 16:10:03 +01:00
Nils Schneider
5f976809a1 gluon-autoupdater: strip trailing - from model 2014-01-13 12:45:55 +01:00
Matthias Schiffer
2e155f9d09 gluon-mesh-vpn-fastd: enable no_rebroadcast on the VPN interface 2014-01-13 01:03:08 +01:00
Matthias Schiffer
d1f01a588f Clean up gluon-alfred 
* Merge gluon-alfred-ffmap into gluon-alfred
* Use gluon-crond instead of alfred's "facter" mechanism based on the broken busybox crond
 2014-01-12 22:37:28 +01:00
Jan-Philipp Litza
dece1f4122 added gluon-alfred and gluon-alfred-ffmap 2014-01-12 22:06:50 +01:00
Matthias Schiffer
293c64e723 gluon-autoupdater: use the new get_model function 2014-01-12 21:40:19 +01:00
Matthias Schiffer
13e3d7ff79 gluon-core: add sh file to get model name etc. 2014-01-12 21:33:44 +01:00
Nils Schneider
a2329773eb gluon-autoupdater: improve manifest.sample 
Makes manifest.sample use the model instead of the board name as that is
what the script actually expects. Also, a sample signature is added.
 2014-01-12 21:18:27 +01:00
Nils Schneider
61171c8c25 gluon-autoupdater: remove dead code 
Recently the autoupdater contained a case statement to distinguish
between TP-Link WDR3600 and TP-Link WDR4300. This was left over from
previous development versions of autoupdater that relied on the board
name instead of the model. It is thus no longer needed and be removed
safely.
 2014-01-12 21:18:27 +01:00
Matthias Schiffer
f2c8be9c48 gluon-config-mode: don't depend on haveged 
Now that haveged starts before the config mode, there is no need to explicity
depend on it; instead it is just used when specified in the site configuration.
 2014-01-12 00:50:43 +01:00
Matthias Schiffer
a259e771e9 gluon-core: fixup WAN interface MAC address setting 2014-01-11 21:31:28 +01:00
Matthias Schiffer
a626c9a165 gluon-core: remove left over 'EOF' from config script 2014-01-11 20:34:58 +01:00
Matthias Schiffer
f969e3a2b1 gluon-ebtables-filter-multicast: correct interface name 2014-01-11 19:27:06 +01:00
Matthias Schiffer
1b9c8dcc0b Don't accept router advertisements by default 2014-01-11 17:43:35 +01:00
Matthias Schiffer
df00835f4c Add gluon-radvd package 2014-01-11 16:05:17 +01:00
Matthias Schiffer
ccc1330ebb next-node: rename config sections 2014-01-11 14:23:27 +01:00
Matthias Schiffer
c14f323058 next-node: remove unused include 2014-01-11 14:11:42 +01:00
Matthias Schiffer
bcb6603333 Disable IPv6 forwarding on br-client 
Disabling forwarding prevents the node from reacting to the Subnet-Router
anycast address.
 2014-01-11 14:01:23 +01:00
Matthias Schiffer
0f5190bc6e Reimplement next-node configuration based on the new netifd version 2014-01-10 22:34:26 +01:00
Matthias Schiffer
f8cdeaefd9 Add ebtables filters from the legacy firmware 2014-01-10 21:49:18 +01:00
Matthias Schiffer
9015c01c34 Allow telnet login in config mode again 2014-01-09 10:06:36 +01:00
Matthias Schiffer
6c952a513a Add gluon-lock-password package and make config mode depend on it 2014-01-09 09:58:59 +01:00