Fixes the display of client counts, which are numbers and not strings
in the respondd data.
Fixes: 3a885a1b22 ("gluon-status-page: make "gateway nexthop" a link (#2278)")
Do not depend on the respondd-airtime module just to get the configured
channels. This removes the display of the frequency in addition to the
channel, as it is not readily available.
In addition, the translation string is improved to allow for text after
the channel number.
This code is usually running on an embedded CPU without FPU. In
addtition to its inefficience, the algorithm is also much harder to
understand.
Replace the logarithm formula with a simple loop.
a205de5594 ramips: mt76x8: add missing config symbol
8abe67d6d2 x86: move Kconfig symbol to common config
2e1a5a4353 generic: add missing Kconfig symbol
Fixes#2277
Signed-off-by: David Bauer <mail@david-bauer.net>
941ba3ffc4 ath79: fix JT-OR750i switch LED assignment
17cb9a9a9e ath79: enable missing pinmux for JT-OR750i
a5850c049e ath79: add support for Joy-IT JT-OR750i
55d9c020a1 netifd: update to the latest version
089efd61e9 netifd: update to the latest version
60fad8f82b glibc: update to latest 2.33 HEAD (bug 28011)
c58afca1aa glibc: update to latest 2.33 HEAD (BZ #27646, bug 27896, BZ #15271)
249aeaa9d8 dnsmasq: distinct Ubus names for multiple instances
a1d50e7b45 kernel: bump 5.4 to 5.4.132
88c8d0a219 dnsmasq: add /tmp/hosts/ to jail_mount
4633471d74 odhcpd: fix invalid DHCPv6 ADVERTSIE with small configured leasetime (FS#3935)
Signed-off-by: David Bauer <mail@david-bauer.net>
TP-Link RE200 v2 is a wireless range extender with Ethernet and 2.4G and 5G
WiFi with internal antennas. It's based on MediaTek MT7628AN+MT7610EN.
Specifications
--------------
- MediaTek MT7628AN (580 Mhz)
- 64 MB of RAM
- 8 MB of FLASH
- 2T2R 2.4 GHz and 1T1R 5 GHz
- 1x 10/100 Mbps Ethernet
- UART header on PCB (57600 8n1)
- 8x LED (GPIO-controlled), 2x button
There are 2.4G and 5G LEDs in red and green which are controlled
separately.
MAC addresses
-------------
The MAC address assignment matches stock firmware, i.e.:
LAN : *:0D
2.4G: *:0E
5G : *:0F
Installation
------------
Web Interface
-------------
It is possible to upgrade to OpenWrt via the web interface. Simply flash
the -factory.bin from OEM. In contrast to a stock firmware, this will not
overwrite U-Boot.
v2: In contrast to the last patches, this is now built on top of ssh
only, without using e.g. 9pfs. Furthermore it works also with
arbitary remote hosts on any target/architecture. Also the
scripts were renamed and moved to /scripts.
The aim of this commit is to allow fast rebuild cycles during the
development of gluon packages.
Currently the following workflow can be used:
# start a local qemu instance
scripts/run_qemu.sh output/images/factory/[...].img
# do your changes in the file you want to patch
vi package/gluon-ebtables/files/etc/init.d/gluon-ebtables
# rebuild and update the package
scripts/push_pkg.sh package/gluon-ebtables/
# test your changes
...
# do more changes
...
# rebuild and update the package
scripts/push_pkg.sh package/gluon-ebtables/
# test your changes
...
(and so on...)
Implementation details:
- Currently this is based on ssh/scp.
- Opkg is used to install/update the packages in the remote machine.
Benefits:
- This works with compiled and non-compiled packages.
- This works with native OpenWrt and Gluon packages.
- This even performs the check_site.lua checks as they are integrated
as post_install scripts into the openwrt package.
- It works for all architectures/targets.
Specify conffiles for our packages, so they aren't overwritten during
opkg updates. While this only matters during development, it is
unintended to have different behaviour for opkg update and full firmware
updates.
df4feb1655 ipq40xx: fix FRITZRepeater 1200 RGMII delay
f3f70fb956 netifd: update to the latest version
Signed-off-by: David Bauer <mail@david-bauer.net>
The PHY lookup helper "find_phy_by_path" could not lookup the PHY name
for paths from multi-phy devices.
An example for such a path would be:
'1e140000.pcie/pci0000:00/0000:00:01.0/0000:02:00.0+1'
The integer after the plus (+) character determines the PHY index of the
specific device in relation to the PHY with the lowest index of the
device.
For example, if the device provides phy2 and phy3, the above path would
describe phy3. In case the device provides phy0 and phy1, it would
describe phy1.
Rewrite the "find_phy_by_path" function to support those paths as well
as regular device paths in a universal manner.
Signed-off-by: David Bauer <mail@david-bauer.net>
Delete all default network device sections upon first boot.
Only LAN & WAN networks are defined at this point. We are using the
legacy way of definiting bridges via the interface sections ifname
option.
The prior filtering was based upon a single device and didn't take into
consideration that DSA interface names can be named arbitrarily.
Signed-off-by: David Bauer <mail@david-bauer.net>
VoCores aren't exactly useful mesh nodes except for experimentation.
They certainly aren't worth maintaining a whole target, in particular
one that has a WLAN driver not used by any other target.
38cdc57be6 mediatek: add missing config symbols
6073d2c02a generic: add missing config symbols
8921e36ed8 iwinfo: move device info into -data package
d3278c4343 build: ensure that dash isn't prepended twice to abi version suffix
47f617ef8d build: prepend ABI suffixes with a dash if package name ends with digit
febf6db0d0 ath79: add missing MTD_NAND_RB91X symbol
983fcc42a4 ath79: add missing GPIO_LATCH symbol
0ad49d368b ath79: mikrotik: fix beeper phantom noise on RB912
ffa943f0b9 ath79: ar934x: fix mounting issues if subpage is not supported
88e1c9b0b5 ath79: add support for MikroTik RouterBOARD 912UAG-2HPnD
bd2e070557 ath79: add NAND driver for MikroTik RB91xG series
43723e6db9 ath79: add gpio-latch driver for MikroTik RouterBOARDs
3eb34bc251 hostapd: make wnm_sleep_mode_no_keys configurable
89d21b7f62 hostapd: make country3 option configurable
72f0733123 ltq-deu: Mark lantiq DEU broken
b0424190ef iwinfo: build with nl80211 backend only and make shared
d723002d84 treewide: unmark selected packages nonshared
86f6171788 ath10k-ct: fix typo in Makefile
24cfa5005e ath10k-ct: update to latest version
69c10497c7 kernel/modules: move act_gact into kmod-sched-core
fc4b5411b3 package/comgt: Handle bind/unbind events
Signed-off-by: David Bauer <mail@david-bauer.net>
It was found that a one second timeout for nodeinfo data may be too low,
so that when a node is otherwise occupied that timeout may be reached
too often.
The nodeinfo query response is also vital to the status-page base
template, so that when it times out, the site will be turned in a broken
state, that it cannot recover from.
Fixes: #2256
A leading tab character usually marks recipe lines in Makefiles;
non-recipe lines must be indented using spaces.
The incorrect tab character doesn't seen to have caused any issues in
this case, but it should be fixed nonetheless, if only for consistency.
The file_contains_line helper function was not testing whether a file
exists or not prior attempting to read from it.
Add this check to circumvent errors on the private WiFi config in
case the hwflags file is missing.
Reported-by: Tom Herbers <freifunk@tomherbers.de>
Tested-by: Tom Herbers <freifunk@tomherbers.de>
Signed-off-by: David Bauer <mail@david-bauer.net>
d666ebcaa3 ubus: update to the latest version
a9100f2196 base-files: wifi: tidy up the reconf code
b27b63b082 base-files: wifi: swap the order of some ubus calls
6f13a39035 mac80211: print an error if wifi teardown fails
9302e63d1a mac80211: always call wireless_set_data (FS#3784)
bea9380149 mac80211: fix no_reload logic (FS#3902)
ccbe535604 mac80211: backport fix for nl80211 control port tx (fixes FS#3857)
4c29ff7cb8 mac80211: add support for 802.3 encap offload with software rate control
a078037ace mac80211: improve rate control performance
9fa925362f busybox: sysntpd: add trigger to reload server
a75928d125 busybox: sysntpd: option to bind server to iface
Signed-off-by: David Bauer <mail@david-bauer.net>
The relevant entry for the primary MAC location was lost when rebasing
the patch on OpenWrt 21.02.
Fixes commit ded4b8a711 ("rockchip-armv8: add FriendlyARM NanoPi R2S")
Signed-off-by: David Bauer <mail@david-bauer.net>
The OpenWrt routing feed was moved to the OpenWrt GitHub org.
Update the URL, as the old one might not work in the future.
Signed-off-by: David Bauer <mail@david-bauer.net>
