nils/gluon
1
0
Fork 0
Code Issues Pull Requests Packages Projects Releases Wiki Activity
3,493 Commits 26 Branches 63 Tags 18 MiB
5263583b74
Commit Graph

160 Commits

Author SHA1 Message Date
Martin Weinelt
4f60f6dbc6 gluon-core: disable legacy_rates by default, drop support for supported and basic rates (#1716) 2019-04-28 16:47:29 +02:00
Manu.WTF
3b0e5fab71 ramips-mt7620: add support for Xiaomi MiWifi Mini (#1638) 2019-03-29 12:43:05 +01:00
David Bauer
a9a4abb637 ipq806x: add support for NETGEAR R7800 (#1669) 
The device is broken until the next release. The LEDs are currently not
working (fixed in current OpenWRT master).

Also give a brief explanation about the BROKEN status being dependent on
the WiFi chip used and not the SoC family in general.
 2019-03-28 14:49:17 +01:00
David Bauer
c1b9ea2d9c gluon-scheduled-domain-switch: add package (#1555) 
This package allows to automatically switch to another domain, either
at a given point in time or after the node was offline long enough.
 2019-02-12 11:00:29 +01:00
David Bauer
387a9b4fe4 gluon-core: assert WiFi driver provides 4 MAC-addresses (#1626) 
Gluon has multiple ways to obtain unique MAC-addresses. They are either
provided by the WiFi driver or derived from the primary MAC-address.

Quoting the same file:

> It's necessary that the first 45 bits of the MAC address don't
> vary on a single hardware interface, since some chips are using
> a hardware MAC filter. (e.g 'rt305x')

This currently fails in case the rt35xx based chips mac address differs
from the primary MAC. In this case, the MAC address for the client0 radio
(vif 1) comes from the WiFi driver. As there is only a single
MAC-address provided by '/sys/class/ieee80211/phyX/addresses' but the
MAC-address for mesh 0 (vif 2) is derived from the Node-ID, resulting in
different first 45 bits. The WiFi won't come up altogether in this case.

This commit verifies at least 4 MAC-Addresses are provided by the WiFi
driver. If this is not the case, all MAC-addresses are derived from the
primary MAC. This way, affected radios are working correctly.
 2019-02-11 21:22:46 +01:00
Martin Weinelt
9153b38117 gluon-core: fix unifiac-{lite,pro} primary mac selection 
fixes #1629
 2019-01-25 01:50:53 +01:00
Martin Weinelt
c4d435c9c7 gluon-core: sort 010-primary-mac by target and board_name 2019-01-25 01:50:53 +01:00
David Bauer
888cddb662 gluon-core: distribute dualband radios (#1606) 
This commit distributes dualband radios evenly on 2.4 GHz and 5GHz with
2.4 GHz being prioritised higher than 5 GHz. This means in case a device
has only a single radio and this radio supports operation in both bands,
it will be set to 2.4 GHz.

Tested-by: Martin Weinelt <martin@darmstadt.freifunk.net>
Signed-off-by: David Bauer <mail@david-bauer.net>
 2018-12-29 21:48:12 +01:00
Julian
68ee1db91e gluon-core: fix pattern %v in opkg URLs (#1594) 
$VERSION_ID is a lowercase value
 2018-12-02 16:59:06 +01:00
Christof Schulze
171c293ebe gluon-core, gluon-mesh-babel: move lua functions that generate ll-addresses from a mac into gluon-core 2018-11-21 20:56:35 +01:00
David Bauer
665cc49d67 ar71xx: add support for Archer C7 v5 2018-10-15 00:38:18 +02:00
David Bauer
246a617d71 ar71xx: add support for TL-WR902AC v1 (#1546) 
This adds support for the TP-Link TL-WR902Ac v1 travel router.

The device is marked as broken due to 64MB which might be insufficient
in certain environments.
 2018-10-11 03:21:51 +02:00
Andreas Ziegler
78ed75ee28 Revert "gluon-core: make sure dns traffic leaves the correct interface when there is ipv6 wan uplink" 
This reverts commit b3d7011130.

with this change, DNS in batman-adv based networks is broken.
although the revert breaks babel based networks, this is not as big of a problem.
 2018-08-03 15:04:26 +02:00
Christof Schulze
b3d7011130 gluon-core: make sure dns traffic leaves the correct interface when there is ipv6 wan uplink 2018-08-02 00:58:51 +02:00
Sven Eckelmann
b9ec173ffb ipq40xx: add support for OpenMesh A62 
This device is a dual 5GHz device. It is recommended to manually change the
radio of the first device to the lower 5GHz channels and the second radio
to the upper 5GHz channels.
 2018-07-25 22:27:16 +02:00
Sven Eckelmann
36a5604dfe ipq40xx: add support for OpenMesh A42 2018-07-25 22:27:16 +02:00
Matthias Schiffer
fd10d7cbb0
gluon-core: replace nixio with luaposix and luabitops 2018-07-17 20:08:15 +02:00
Matthias Schiffer
60a0e78a4a
gluon-core: gluon.util: remove unused function readline() 2018-07-17 20:08:15 +02:00
David Bauer
c4b1febd31 ipq40xx: add target 
This commit adds support for the new ipq40xx target.
 2018-07-16 01:39:36 +02:00
Matthias Schiffer
7e4bfee3c9
gluon-core: upgrade: remove unused variables 2018-07-14 13:35:28 +02:00
Matthias Schiffer
f1f2bae94f
gluon-core: remove obsolete gluon.site_config library 2018-07-13 23:16:33 +02:00
David Bauer
52bc028e6b ar71xx: add support for OCEDO Koala (#1475) 2018-07-13 01:25:58 +02:00
Matthias Schiffer
210d97c53e
Switch to OpenWrt 18.06 branch 2018-07-10 22:57:40 +02:00
Sven Eckelmann
ef819cc196 ar71xx: add support for OpenMesh OM2P(-HS)v4 (#1426) 2018-06-09 13:55:38 +02:00
Sven Eckelmann
9d719a2e57 ar71xx: add support for OpenMesh A40/A60 (#1424) 2018-06-08 20:18:30 +02:00
Matthias Schiffer
1f7ed28b76
gluon-core: set VXLAN/legacy mode in site config 
In multidomain setups, VXLAN is enabled by default, but can be disabled in
domain configs using the mesh/vxlan option. In single domain setups, the
mesh/vxlan option is mandatory.

The UCI option for legacy mode is removed.

Fixes #1364
 2018-04-27 18:05:50 +02:00
Matthias Schiffer
543eb17882
gluon-core: remove DNS cache feature 
dnsmasq's caching is severly broken and does not handle all answer records
equally. In particular, its cached answers are missing DNSKEY and DS
records, breaking DNSSEC validation on clients.

Remove the cache for now. It may return if dnsmasq is fixed or we switch to
a different resolver.
 2018-04-13 15:15:40 +02:00
Matthias Schiffer
9b937a8c64
gluon-core: remove unused gluon.sysctl Lua module 2018-04-13 14:41:01 +02:00
Matthias Schiffer
25b32ec2fe
treewide: move sysctl settings to /etc/sysctl.d 
net.ipv6.conf.br-client.forwarding is moved from gluon-client-bridge to
gluon-mesh-batman-adv, as the setting is not useful with non-bridged
protocols.
 2018-04-13 14:41:01 +02:00
Matthias Schiffer
9f86bf3155
gluon-core: add default_hostname helper 2018-03-17 11:44:33 +01:00
Matthias Schiffer
83a6847fbd
gluon-web: remove unneeded functions from gluon.web.util 
exec() is moved to gluon.util.
 2018-02-25 17:13:30 +01:00
Matthias Schiffer
5dcb784308
gluon-core: remove unused lock and exec functions 2018-02-25 17:13:30 +01:00
Matthias Schiffer
987eef011a
gluon-core: remove unused user/group management functions, call lock command directly 2018-02-25 17:13:30 +01:00
Christof Schulze
9711afaf69
gluon-core: allow multiple domain names for next_node-feature 
* change type of next_node.name
* create domain entry for each entry and add to dnsmasq configuration

[Matthias Schiffer: reword documentation]
 2018-02-16 15:15:31 +01:00
Matthias Schiffer
345a5de861
gluon-core: add newline to the end of sysconfig files 
Both gluon.sysconfig and libgluonutil already remove the trailing newline
if it exists. It's nicer to avoid files without a trailing newline, e.g.
for printing the file contents in a terminal.
 2018-02-15 20:57:53 +01:00
Martin Weinelt
427c83754b gluon-core: 200-wireless: upgrade 11ac radios to VHT20 (#1328) 
Patch originally authored by @oleeander.

Fixes #424
 2018-02-15 20:29:19 +01:00
Matthias Schiffer
d61f6a1e85
gluon-core: rename iterate_radios() to foreach_radio(), pass whole radio section 
Allows to remove some redundant UCI lookups.
 2018-02-15 14:04:37 +01:00
Karsten
f69fbf7d05 gluon-core: don't disable legacy mesh on mesh_lan on reconfigure (#1323) 
Fixes #1322
 2018-02-07 07:33:25 +01:00
Matthias Schiffer
c479d9160d
gluon-core: don't request a prefix via DHCPv6 on WAN 
The prefix is not used, and requesting it leads to odhcp6c log spam with
certain DHCPv6 servers.
 2018-02-03 03:02:56 +01:00
Matthias Schiffer
09c2e60cd4
gluon-core: upgrade/110-network: fix formatting 2018-02-03 03:02:20 +01:00
Matthias Schiffer
a2f45d0d32
gluon-core: store default domain in UCI 2018-01-26 12:32:46 +01:00
Matthias Schiffer
e54b37d835
gluon-core: firewall: move VXLAN rules to the top 
Evaluating these rules before all the ICMPv6 rules improves wired mesh
throughput measurably.
 2018-01-24 22:41:29 +01:00
Matthias Schiffer
2950cc3f59
gluon-core: only use a bridge for wired meshing when necessary 
On most devices, there is only a single LAN interface connected to all LAN
ports, so no bridge is necessary.
 2018-01-24 22:16:09 +01:00
lemoer
b520bf5c50
gluon-core: rename site_seed to domain_seed 
[Matthias Schiffer: rebase]
 2018-01-19 03:30:06 +01:00
lemoer
0f5d932c4f
gluon-core: add util gluon-show-site to print merged site config 
This should not convert JSON to a Lua table and back, as this loses the
distinction between arrays and objects, but as our site.conf is defined in
Lua anyways (for now), this can be fixed in a later revision.

[Matthias Schiffer: rename to gluon-show-site, rebase]
 2018-01-19 01:07:44 +01:00
Matthias Schiffer
0b80f1b5ce
gluon-core: reimplement gluon.site module in C 
By basing the Lua gluon.site module on gluonutil_load_site_config(), the
config load implementation needs to changed only in a single place for
multi-domain support.
 2018-01-18 16:29:00 +01:00
Matthias Schiffer
6cf88c3b03
Replace luci-lib-jsonc with our own lua-jsonc 2018-01-18 16:28:59 +01:00
Matthias Schiffer
01336f70ec
gluon-core: firewall: make the default input policy REJECT 
Fixes #1311
 2018-01-17 09:51:10 +01:00
Matthias Schiffer
a32fddf38c
gluon-core: firewall: accept inbound VXLAN traffic on wired mesh interfaces 
Fixes #1308
 2018-01-17 09:51:10 +01:00
David Bauer
99b02701cc ar71xx: add support for TP-Link Archer C58/C59/C60 (#1281) 2018-01-16 18:51:12 +01:00
Matthias Schiffer
18b9174d03
Use 'disabled' attribute instead of 'auto' to disable wired mesh interfaces 
The 'auto' attribute still allows enabling the interface using ifup, which
is not intended when wired mesh is disabled.
 2018-01-11 23:06:36 +01:00
David Bauer
9273e56c63 ar71xx: add support for TP-Link Archer C7 v4 (#1289) 2018-01-03 16:50:23 +01:00
Matthias Schiffer
2b1ffb3034
gluon-core, gluon-client-bridge: create local_client zone in core 
As core defines basic rules for this zone, it makes sense to create it
there.
 2017-12-27 02:43:34 +01:00
Matthias Schiffer
8ea5810bda
gluon-core: firewall: allow inbound ICMPv4 ping on local_node 2017-12-27 02:43:34 +01:00
Matthias Schiffer
39284f00d0
gluon-core: firewall: allow Multicast Listener Discovery on mesh/local_client 
Based-on-patch-by: Christof Schulze <christof.schulze@gmx.net>
 2017-12-27 02:43:33 +01:00
Matthias Schiffer
a252383918
gluon-core: firewall: remove redundant ICMPv6 output rules 
OUTPUT is always accepted, no need to allow ICMPv6 explicitly.
 2017-12-27 02:43:33 +01:00
Matthias Schiffer
fe2048e4df
gluon-core: firewall: coding style 
Wrap long lines.
 2017-12-27 02:43:33 +01:00
Christof Schulze
1c1c9f8fc7
gluon-core: firewall rework, make base policy more restrictive 
* gluon-core, gluon-client-bridge: introduce new firewall zone: local_client
 * gluon-core: put clients in local_client zone, introduce drop-zone,
   set dns-rules and zones
 * gluon-respondd: allow respondd on mesh
 * gluon-status-page-api: allow http input on mesh and client
 2017-11-25 23:19:08 +01:00
Matthias Schiffer
13b325355d
gluon-core: make old site_config library reference new one, not the other way around 2017-08-11 22:07:35 +02:00
Matthias Schiffer
ee6afaced9
treewide: use new gluon.site Lua library 
Some files have received some additional refactoring.
 2017-08-11 22:07:34 +02:00
Matthias Schiffer
8a41ed05f1
gluon-core: more coding style fixes 2017-08-11 20:28:59 +02:00
kb-light
90305761ce
gluon-core: update lib/gluon/upgrade/150-poe-passthrough for naming within lede 2017-08-11 20:27:51 +02:00
kb-light
949f4b7dd5
gluon-core: lib/gluon/upgrade/150-poe-passthrough: fix indentation 2017-08-11 20:26:08 +02:00
Matthias Schiffer
3df9fcecb0
gluon-core: explicitly disable radios without configuration in site.conf 2017-08-08 14:08:35 +02:00
Matthias Schiffer
293a45456b
gluon-core, gluon-client-bridge: use new gluon.site library in gluon.util 
In particular, this affects users of gluon.util.iterate_radios.
 2017-08-08 14:07:09 +02:00
Matthias Schiffer
1d6e6726d7
gluon-core: use new gluon.site library to avoid 'or {}' syntax 2017-08-08 13:53:02 +02:00
Matthias Schiffer
57adb49de2
gluon-core: add new gluon.site library for convenient access to optional values 
The new gluon.site lua library will eventually replace gluon.site_config
(which is hereby deprecated, but will continue to be supported for a
while).

The new gluon.site library will wrap all values to allow traversing
non-existing tables without errors.

    site = require 'gluon.site'
    c = site.a.b.c -- doesn't fail even if a or a.b don't exist

The wrapped values must be unwrapped using call syntax:

    site_name = site.site_name()

Using the call syntax on a non-existing value will return nil. An
alternative default value may be passed instead:

    mac = site.next_node.mac('16:41:95:40:f7:dc')
 2017-08-08 13:20:38 +02:00
Matthias Schiffer
6884aad788
gluon-core: simplify 820-dns-config code 2017-08-08 04:31:53 +02:00
Matthias Schiffer
31721a61f5
gluonc-core: 200-wireless: remove unneeded nil checks for uci:set_list() 
uci:set_list() will delete the list when nil is passed, so there is no need
to differentiate between the cases.
 2017-08-08 04:31:52 +02:00
Matthias Schiffer
06d0c0f211
gluon-core: fix 200-wireless coding style 2017-08-08 04:31:52 +02:00
Matthias Schiffer
ae593d8439
gluon-core: convert site seed to lowercase 
While we use the hexadecimal representation as a hash input for simplicity,
it should not be interpreted as case-sensitive.
 2017-06-27 23:28:23 +02:00
Matthias Schiffer
0d6f957196
gluon-core: introduce new gluon_wired netifd proto for wired meshing 
The new proto will simplify the switch to VXLAN encapsulation.
 2017-06-27 23:00:17 +02:00
Matthias Schiffer
8bcd0975af
gluon-core: add a "site seed" to site.conf to seed site-specific random values 2017-06-27 23:00:17 +02:00
Matthias Schiffer
acfc3cc1a2
gluon-core: upgrade/210-interface-wan: whitespace cleanup 2017-06-21 17:16:41 +02:00
Matthias Schiffer
0db63008cd
gluon-core: upgrade/220-interface-lan: whitespace cleanup 2017-06-21 02:56:23 +02:00
Linus Lüssing
c519ec4596 gluon-core: reenable multicast snooping for wan zone 
LEDE recently disabled multicast snooping by default:

https://git.lede-project.org/?p=project/netifd.git;a=commitdiff;h=52541140f8138e31958cdc3d7e42a4029fa6bbc9

Reenable it for Gluon as there have been no confirmed issues for
LEDE and no negative reports concerning Gluon v2016.2.x so far.

Closes #1025.

Signed-off-by: Linus Lüssing <linus.luessing@c0d3.blue>
 2017-04-13 22:31:47 +02:00
Matthias Schiffer
02f2d8796c
gluon-core: don't call 'ip' to check if an interface exists 2017-04-11 02:01:21 +02:00
Matthias Schiffer
c4613c4e8d
gluon-core: gluon.util: pass UCI cursor to get_wlan_mac(), get rid of local UCI context 2017-04-11 01:48:11 +02:00
Matthias Schiffer
f48d10bdde
gluon-core: gluon.util: pass UCI cursor as argument to iterate_radios() instead of using local context 2017-04-11 01:48:11 +02:00
Julian Labus
734d1925de
gluon-core: gluon.util: fix PHY detection for radios addressed by PCIe address 2017-04-11 01:48:10 +02:00
Matthias Schiffer
da22c5cf8e
gluon-core: gluon.util: change find_phy argument to config table and make public 2017-04-11 01:48:10 +02:00
Julian
13c61d9394 gluon-core: fix pattern %v in opkg URLs (#1087) 2017-04-07 14:24:13 +02:00
Cyrus
6a0ca58fc3 gluon-core: Fixed bug which kept legacy VLAN interface definitions (#1085) 2017-04-03 20:48:42 +02:00
Matthias Schiffer
b45585a109
Switch LAN and WAN port of Ubiquiti AirGateway 
This makes the LAN port the PoE master, so the AirGateway can be used to
supply power to another node connected via mesh-on-LAN.

Fixes #608
 2017-02-23 19:49:39 +01:00
Matthias Schiffer
184cb1010d
gluon-core: add single_as_lan option to configure a single ethernet port as LAN instead of WAN 2017-02-10 22:48:23 +01:00
Matthias Schiffer
e39cbcbda1
gluon-core: gluon.util: make exec() replace all stdio files with /dev/null 2017-02-10 22:09:59 +01:00
Matthias Schiffer
ea12cb770d
gluon-core: nicer indentation of /lib/gluon/upgrade/020-interfaces 2017-02-10 22:08:51 +01:00
Matthias Schiffer
e665bfe64a
gluon-core: don't depend on luci.ltn12 2017-02-10 02:10:01 +01:00
Matthias Schiffer
c83b5b3cab
treewide: get rid of luci.util outside of config mode/advanced settings 2017-02-10 02:10:01 +01:00
Matthias Schiffer
6cf03bab37
treewide: replace normal uses of luci.model.uci with simple-uci to reduce LuCI dependencies 
We also make use of the boolean support of simple-uci to make scripts
clearer.
 2017-02-10 02:10:01 +01:00
Christof Schulze
e2e910fb41 gluon-core: add configuration that enables the next_node to be used as dns cache 2017-01-24 23:20:40 +01:00
Matthias Schiffer
0a8e028e8f
gluon-core: upgrade: don't print an error message on systems without opkg 2017-01-19 13:10:57 +01:00
Matthias Schiffer
78b2775eec
Use LEDE as base for Gluon 2017-01-18 17:21:43 +01:00
Matthias Schiffer
04818c170b
package: refactor add_to_set/remove_to_set to get rid of last LuCI patch 2017-01-18 16:28:54 +01:00
Matthias Schiffer
99471f8d5d
ar71xx-generic: add support for TP-Link WBS210/510 (untested) 
Closes #844
 2017-01-06 12:02:32 +01:00
Christof Schulze
e41e5cb8d9 gluon-core: add get_mesh_devices(uconn) to gluon.util which will return all devices being up and having proto = gluon_mesh 2016-12-21 23:51:48 +01:00
Christof Schulze
0abe350782 gluon-core: replace blanks by tabs in gluon.util 2016-12-21 23:47:03 +01:00
Matthias Schiffer
d2373590e0
gluon-core: add support for removing sysctl settings 2016-12-10 23:43:44 +01:00
Matthias Schiffer
20fc162b38
gluon-core, gluon-setup-mode: fix WAN/LAN assignment on CPE210 
The interfaces were accidentially switched when the CPE210 was separated
from the CPE510 code.
 2016-11-22 20:01:13 +01:00
Matthias Schiffer
6cddaedfc7
Reorganize MAC addresses, always explicitly set address for private WLAN 
Fixes #842
 2016-09-07 02:14:42 +02:00