This commit adds support for the Wavlink WL-WN577A2 (black case).
In Germany this dual-band wall-plug wireless router is sold under
the brand name Maginon WL-755 (white case).
Suppport for current OpenWRT-19.07-SNAPSHOT is included as patch.
CPU: MediaTek MT7628AN (580MHz)
Flash: 8MB
RAM: 64MB
Bootloader: U-Boot
Ethernet: 2x 10/100 Mbps (Ralink RT3050)
2.4 GHz: 802.11b/g/n SoC
5 GHz: 802.11a/n/ac (MT7610E)
Antennas: internal
4 green LEDs: Power and 3 programmable (LAN, WAN, WPS)
Buttons: Reset, WPS
Small sliding power switch
Flashing instructions (U-boot):
- Configure a TFTP server on your PC/Laptop and set its
IP to 192.168.10.100
- Rename the OpenWrt image as firmware.bin and place it in
the root folder of the TFTP server
- Power off the device and connect an Ethernet cable from
its LAN or WAN port to your PC/Laptop
- Press the WPS button (and keep it pressed)
- Power on the device (using the small sliding power switch)
- After a few seconds, when the WAN/LAN LED stops blinking
very fast, release the WPS button
- Flashing takes about a minute
- WPS LED will indicate OpenWrt device status
Signed-off-by: Lars Wessels <software@bytebox.org>
This backports the TP-Link Archer C50 v4.
We are dropping the following upstream commits. They add support for the
TP-Link recovery-flag which enabled the web-recovery. As they are not
needed for the router to work, we drop them for now.
28cd2ca base-files: sysupgrade: support additional mtd options
1e06482 mtd: add logic for TP-Link ramips recovery magic
This commit removes the broken flag from all devices in the mt76x8
subtarget.
The stability of the mt76 driver for the mt7628 and mt7612 has greatly
improved in the last half-year. It might be still behind ath9k and
ath10k but it is suitable for daily use.
This affects the following devices:
- GL.iNet MT300N v2
- TP-Link Archer C50 v3
- TP-Link TL-WR841 v13
