Andreas Ziegler
e92140c593
targets: remove check if ATH10K_PACKAGES is set
...
as GLUON_WLAN_MESH now is set by default, ATH10K_PACKAGES is set by default, too
2018-01-26 14:17:35 +01:00
Matthias Schiffer
07dbfea617
gluon-site: disable multidomain support by default
2018-01-26 12:32:46 +01:00
Matthias Schiffer
faceb3932c
config: check if GLUON_DEBUG is 1 rather than nonempty
2018-01-26 12:32:46 +01:00
Andreas Ziegler
a99fdf7919
ramips-mt7621: Netgear WNDR3700v5 has no factory image
...
fixes build after 3ec63b8c
2018-01-26 01:45:49 +01:00
Andreas Ziegler
d586720c5c
ar71xx-generic: add support for Ubiquiti NanoBeam M5
...
marked as BROKEN for now as it is untested
related issue: #1099
2018-01-20 15:38:49 +01:00
Andreas Ziegler
c4e3cca1d3
ar71xx-tiny: add support for TP-Link TL-WR802N v1
...
marked as BROKEN for now as it is untested
2018-01-19 23:47:36 +01:00
Andreas Ziegler
708aae5015
ar71xx-generic: add support for TP-Link TL-WR810N
...
marked as BROKEN for now as it is untested
2018-01-19 23:47:31 +01:00
Andreas Ziegler
3ec63b8c70
ar71xx-generic: add support for Netgear WNDR3700v5
...
fixes #442
2018-01-19 20:45:29 +01:00
David Bauer
99b02701cc
ar71xx: add support for TP-Link Archer C58/C59/C60 ( #1281 )
2018-01-16 18:51:12 +01:00
Andreas Ziegler
fb93c3b259
ar71xx: correct model name for TL-WR1043N v5, fixes #1307
2018-01-16 18:30:37 +01:00
Tata
919dda90b3
build: introduce GLUON_WLAN_MESH build variable ( #1298 )
...
defaults to 11s, allowing to build devices without IBSS-support
obsoletes GLUON_ATH10K_MESH
2018-01-10 15:49:33 +01:00
David Bauer
9273e56c63
ar71xx: add support for TP-Link Archer C7 v4 ( #1289 )
2018-01-03 16:50:23 +01:00
Jan-Tarek Butt
f514ec13b5
brcm2708-bcm2709: add manifest_alias for raspberry-pi-2-model-b-rev-1.1
2017-12-27 03:06:19 +01:00
Jan-Tarek Butt
7b61cb16f8
brcm2708-bcm2708: add manifest_alias for raspberry-pi-model-b-rev-2
...
Signed-off-by: Jan-Tarek Butt <tarek@ring0.de>
2017-12-27 03:05:53 +01:00
David Bauer
70784cb3b2
ar71xx: add support for TP-Link TL-WR1043N v5 ( #1279 )
2017-12-19 04:22:44 +01:00
Steffen Förster
9136562517
ramips-rt305x: add D-Link DIR-615 rev D1-D4
2017-12-08 00:00:35 +01:00
kb-light
17d1c65610
ramips-mt7621: do not tag ubnt-erx(-sfp) as broken
...
There is no wifi, so there is no bad wifi.
[Matthias Schiffer: rebase onto master]
2017-11-26 12:46:20 +01:00
Karsten Böddeker
64cfd648cb
ramips-mt7621: add support for UBNT EdgeRouter X-SFP
...
[Matthias Schiffer: remove patch "ramips: simplify ubnt-erx-sfp device
definition", as it depends on other patches that have not been backported]
2017-11-26 12:44:52 +01:00
Andreas Ziegler
1ca402ee46
ramips-mt7621: ZBT-WG3526 has no factory image
2017-11-23 03:09:03 +01:00
Andreas Ziegler
14ef0387ea
ramips-mt7621: add ZBT-WG3526
2017-11-23 03:05:58 +01:00
Andreas Ziegler
a040ec0083
ar71xx: add TP-Link Archer C25 ( #1238 )
...
BROKEN because of stability issues with 5GHz enabled.
2017-10-22 01:43:20 +02:00
Matthias Schiffer
08cbbf9925
build: move all generic config generation to targets/generic
...
As the default package list is now handled using the 'packages' directive,
explicit wpad-mini removals in target definitions can be dropped.
2017-09-07 03:21:42 +02:00
Matthias Schiffer
587c5016cb
build: handle generic and target-specific config in the same run of target_config{,_check}.sh
...
This, together with a new try_config directive, will allow checking the
generic config and make it more flexible.
2017-09-07 00:17:57 +02:00
Steffen Förster
b325f00599
ramips-mt7620: add new subtarget with some Gl.Inet devices
2017-09-06 20:58:51 +02:00
hexa-
c3c6ea0cd7
brcm2708: drop wpad-mini as it clashes with hostapd-mini ( #1205 )
2017-08-13 21:43:57 +02:00
Steffen Förster
e395284156
brcm2708: add target and platform for raspi3 ( #1204 )
...
This device has built in wifi we should include it at least for experiments.
2017-08-13 15:53:11 +02:00
Matthias Schiffer
085cf0debf
ar71xx-generic: add alias for Ubiquiti UniFi Mesh
...
Fixes #1021
2017-08-08 12:08:09 +02:00
Linus Lüssing
23a8947628
Revert "generic: batman-adv: disable multicast optimizations for now"
...
This reverts commit 819758f425
2017-08-07 22:07:14 +02:00
Matthias Schiffer
6e039911ab
generic: don't explicitly enable busybox sha256sum applet
...
LEDE has sha256sum enabled by default.
2017-07-03 03:49:03 +02:00
Matthias Schiffer
102f6a7244
Revert "generic: busybox: enable sha512sum to workaround segfault issue"
...
This reverts commit dcff68029e
2017-07-03 01:45:21 +02:00
Matthias Schiffer
86636c3ae6
ramips-rt305x: add D-Link DIR-615 H1
...
Fixes #1164
2017-06-29 18:28:16 +02:00
Florian Beier
1690b51d21
ar71xx-generic: add support for GL.INet GL-AR300M ( #1163 )
2017-06-27 02:31:39 +02:00
Matthias Schiffer
819758f425
generic: batman-adv: disable multicast optimizations for now
...
A bug in batman-adv can lead to a large amount of management traffic being
exchanged between nodes when the multicast optimizations are enabled,
effectively making the mesh unusable. It's safer to disable the feature
for now, until we have a real fix.
2017-06-26 14:37:13 +02:00
David Lutz
93c6cf1506
ramips-rt305x: Add support for A5-V11 ( #1151 )
2017-06-23 13:23:31 +02:00
Matthias Schiffer
dcff68029e
generic: busybox: enable sha512sum to workaround segfault issue
...
sha512sum doesn't add much code that is not also used by sha256sum, but the
change of the configuration hides the segfault issue described in:
https://bugs.lede-project.org/index.php?do=details&task_id=822
While the issue only seemed to affect dhcpv6.script, it would clutter /tmp
with coredumps, eventually leading to OOM.
2017-06-23 13:12:46 +02:00
Matthias Schiffer
869ceb425c
x86-generic: add manifest aliases for x86-kvm and x86-xen_domu
...
Allow the autoupdater to work when updating from the removed targets.
2017-06-13 12:21:03 +02:00
Matthias Schiffer
9b687332d3
ar71xx-generic: remove CPE220/CPE520 1.0 devices
...
These devices have never actually existed; the corresponding support
strings have been removed from the stock firmwares as well.
2017-06-07 15:22:18 +02:00
Matthias Schiffer
aabe0dd41d
ar71xx-tiny: add TP-Link TL-WA701N/ND v2 again
...
It seems the device was lost during the OpenWrt -> LEDE migration.
2017-06-07 15:20:12 +02:00
Matthias Schiffer
009162134a
ramips-mt7621: add support for UBNT EdgeRouter X
2017-06-06 16:34:04 +02:00
Matthias Schiffer
88f2e3e4e2
Revert "generic: revert to OpenWrt CC partition sizes on x86 and similar images for now"
...
This reverts commit fcce9e5295
2017-06-01 21:10:01 +02:00
Matthias Schiffer
fcce9e5295
generic: revert to OpenWrt CC partition sizes on x86 and similar images for now
...
This will allow upgrading using the broken sysupgrade scripts in OpenWrt
CC without losing the configuration.
Fixes #1010
2017-05-30 03:28:31 +02:00
Matthias Schiffer
ad91ab1be7
build: don't copy packages to output directory for targets without opkg
...
Fixes #1126
2017-05-15 23:23:02 +02:00
Steffen Förster
373613bb54
ar71xx-generic: add profile for UBNT Airgateway Pro and alias for UBNT Airgateway LR ( #1107 )
...
The Airgateway LR is the same device as the normal Airgateway but with an detachable antenna. The Pro version is a cheap dual band device.
2017-04-27 04:15:13 +02:00
Matthias Schiffer
6c053d92b8
ar71xx-tiny: add support for TP-Link TL-WR841N/ND v12
2017-04-20 16:59:55 +02:00
bobcanthelpyou
82f5afd09d
ar71xx-tiny: add TP LINK TL-WA730RE v1
2017-04-16 16:26:24 +02:00
Malte Möller
ad9878be9d
ar71xx-generic: add Support for TP Link RE450 ( #1092 )
...
Fixes #1084
Hardware is very similar to Archer C5v1 and C7v2.
Tested factory install and autoupdater.
IBSS Mesh on 2.4 and 5 GHz is working fine.
The only Ethernet Port is used for config mode and afterwards handled
as WAN Port.
2017-04-13 02:01:19 +02:00
Matthias Schiffer
57070a56be
ipq806x: add new target and support for TP-Link Archer C2600
...
Completely untested for now.
Closes #835
2017-03-27 11:44:07 +02:00
Tarnatos
d3d1059149
ar71xx: more consistent image file names for TP-Link TL-WR940N ( #1071 )
...
The TL-WR940N doesn't have detachable antennas. Make v1-v3 match v4.
2017-03-23 12:40:46 +01:00
hexa-
1c9b0ced00
bcm2708: prevent wpad-mini from conflicting with hostapd-mini ( #1065 )
2017-03-10 15:31:20 +01:00
0x4A6F
ebeefa1747
ar71xx-generic: add support for Ubiquiti Rocket M Titanium ( #968 )
2017-03-01 13:21:28 +01:00
Matthias Schiffer
a70462ff18
Update Gluon packages
...
Switch sha512sum to sha256sum to match updated autoupdater.
2017-02-25 01:28:07 +01:00
Julian
6d77065263
mvebu: remove wpad-mini ( #1056 )
2017-02-24 15:19:16 +01:00
Matthias Schiffer
0af0be0673
ar71xx-generic: don't try to build a factory image for D-Link DIR-825 B1
...
The size of the factory images is limited to 4MB, which caused build
failures when many additional packages were included.
Rather than moving the device to ar71xx-tiny, we ignore the factory images
and just build the sysupgrade. This way, the whole flash is usable for
Gluon.
This means that installing Gluon on these devices will now require to flash
a plain LEDE image first, and then upgrading using the Gluon sysupgrade
image.
Fixes #1020
2017-02-24 01:50:17 +01:00
Matthias Schiffer
31d3f08f25
treewide: convert all LuCI-based packages to gluon-web
2017-02-22 01:31:25 +01:00
Matthias Schiffer
08994ae8c0
ar71xx-tiny: fix image name for TL-WR940N v4
...
To fix the autoupdater.
2017-02-21 20:54:36 +01:00
txt.file
1fdaee080a
ar71xx-generic: add support for TP-Link TL-WA7210N ( #1029 )
2017-02-21 09:42:30 +01:00
Matthias Schiffer
b4ccb1fa95
ar71xx-mikrotik: update device definitions
2017-02-12 07:15:16 +01:00
Matthias Schiffer
31ee7be16d
x86-xen_domu: remove
...
Remove obsolete x86-xen_domu definition, it has been merged into
x86-generic.
2017-02-12 05:11:10 +01:00
Christof Schulze
b40d94111e
build: add GLUON_DEBUG flag, if enabled set CONFIG_DEBUG and do not strip binaries ( #1028 )
2017-02-11 23:33:07 +01:00
Steffen Förster
b8dc1a784a
ramips-mt7628: add new platform and vocore2 ( #1027 )
2017-02-09 02:07:00 +01:00
Steffen Förster
fb05aef96b
x86-geode: add target for Geode CPUs
2017-02-03 22:47:14 +01:00
Matthias Schiffer
8ea481edea
x86: add kmod-8139cp by default
...
Fixes #1022
2017-02-03 22:35:56 +01:00
Matthias Schiffer
78b2775eec
Use LEDE as base for Gluon
2017-01-18 17:21:43 +01:00
Matthias Schiffer
850499fdb3
ar71xx-generic: mark Meraki devices as BROKEN again
...
These devices don't have unique MAC addresses with OpenWrt/LEDE at the moment
(see #993 ).
2017-01-09 23:06:09 +01:00
kb-light
d3bc378536
ar71xx-generic: TP-Link WBS210/510: remove BROKEN ( #1002 )
2017-01-09 22:25:16 +01:00
Matthias Schiffer
99471f8d5d
ar71xx-generic: add support for TP-Link WBS210/510 (untested)
...
Closes #844
2017-01-06 12:02:32 +01:00
Matthias Schiffer
bee999dd90
ar71xx-generic: backport support for TP-LINK TL-WR1043ND v4
...
Fixes #961
2016-12-22 00:01:55 +01:00
David Lutz
ef39158ed1
ar71xx-generic: add Support for TP-LINK TL-WR940N v4
2016-12-13 01:31:43 +01:00
Matthias Schiffer
61de5b8841
mvebu: fix comment about BROKEN status
2016-12-12 15:02:45 +01:00
Julian Labus
5b10928ce0
mvebu: add missing package uboot-envtools which is needed for sysupgrade
2016-12-12 15:02:11 +01:00
Matthias Schiffer
1677b62e4b
ar71xx: fix LEDs for TL-WA801ND v3, remove BROKEN
2016-12-06 19:01:46 +01:00
Julian
a9e29725c0
Add support for mvebu target ( #964 )
2016-12-05 10:45:05 +01:00
Neal Oakey
9223639ffe
ar71xx-generic: make UBNT image names consistent ( #809 )
2016-11-29 23:11:50 +01:00
Matthias Schiffer
5ef3d883a5
ar71xx-generic: backport region code support for TP-Link TL-WR841ND v11
2016-11-11 03:45:49 +01:00
Andreas Ziegler
9fba8d7a64
x86: include kmod-igb, kmod-sky2 and kmod-tulip into generic and 64 subtargets
2016-11-06 15:07:06 +01:00
Andreas Ziegler
dbc6fe70d7
x86: sort network packages alphabetically
2016-11-06 15:06:24 +01:00
Matthias Schiffer
a606b32b17
ar71xx-generic: set region code for TL-WA901ND v4 and remove BROKEN
...
Tested-by: Jannis Pinter <jannis@pinterjann.is>
2016-10-15 19:11:35 +02:00
Matthias Schiffer
2432373f5f
ar71xx-generic: allow choosing the ath10k firmware branch in site.mk
...
The GLUON_ATH10K_MESH must be set to 11s or ibss; when it is not set,
ath10k device images won't be built at all. This also allows us to remove
the BROKEN flag for ath10k devices, as the GLUON_ATH10K_MESH variable is
sufficient to avoid ath10k devices if desired.
Fixes #864
2016-09-09 03:02:40 +02:00
Sven Eckelmann
d3811bb2bf
ar71xx-generic: Mark MR1750 and OM5P-AC devices as BROKEN ( #878 )
...
The MR1750 and OM5P-AC devices are based on ath9k SoCs and an external
ath10k chip. All devices which are using ath10k should be marked as broken
due to deficits in their IBSS support.
Signed-off-by: Sven Eckelmann <sven.eckelmann@open-mesh.com>
2016-09-07 17:56:04 +02:00
Steffen Förster
7fd1d0d62e
ar71xx-generic: add support for ALFA N2 and N5 ( #871 )
...
+ added profile for these devices
+ added entry in the docs for these devices plus the missing alfa tube
2016-08-30 12:18:35 +02:00
Matthias Schiffer
639c12b8e2
ar71xx-generic: add support for new TP-Link region codes
...
Generate flashable images for the Archer C7 v2 with current stock firmware
again.
To set the region code, the GLUON_REGION variable must be set to "us" or
"eu" in site.mk or as a make argument.
Fixes #860
2016-08-28 21:03:56 +02:00
Matthias Schiffer
1c6256907b
ar71xx-generic: add support for TL-WA801ND v3 (untested)
...
Fixes #800
2016-08-23 00:26:51 +02:00
Matthias Schiffer
61cde569ad
ar71xx: backport fixes for better CPE210/510 support (again)
...
This patchset enables the RX LNA for the CPE210/510, improving RX by about
20dB. The profiles for CPE210 and CPE510 is split into two images.
The problematic patch switching the CPE510 to the secondary ART is left
out.
2016-08-22 18:42:33 +02:00
Simon Wunderlich
655498889b
ar71xx-generic: remove broken mark for wr842n-v3 ( #859 )
...
I've bought a couple of those devices from Senetic GmbH.
https://www.senetic.de/product/TL-WR842N
They have 16 MB of Flash and 64 MB of RAM. Platform support works fine,
I've also tested a little with Ethernet (since I saw some regressions on
OpenWRT/LEDE with 841v11), no problems.
Therefore, lets remove the broken mark.
Signed-off-by: Simon Wunderlich <sw@simonwunderlich.de>
2016-08-22 16:15:08 +02:00
Sprinterfreak
74f4a9380a
ar71xx-generic: verified Tube2h, remove BROKEN ( #847 )
2016-08-08 11:55:37 +02:00
Jannis Pinter
f103ee244f
Add support for Buffalo WZR-HP-G300NH2 ( #836 )
...
Add Buffalo WZR-HP-G300NH2 to Makefile, device is already supported in OpenWrt and LEDE.
Verified functionality with actual device.
2016-07-29 15:28:28 +02:00
Matthias Schiffer
0c63fc466e
ar71xx-generic: fix Tube2H profile
2016-07-27 13:19:01 +02:00
Matthias Schiffer
0b0550c30f
ar71xx-generic: fix names of ALFA products
...
Fixes autoupdater for Hotnet-UB and AP121. Also add note about broken
autoupdates on Tube2H.
2016-07-27 01:42:59 +02:00
Sprinterfreak
7a03c09e55
ar71xx-generic: add support for ALFA Networks Tube2H ( #828 )
2016-07-25 15:53:03 +02:00
Matthias Schiffer
91881f45dc
mac80211: update to LEDE 6c2651566cce8f5b3a3d3b976439dee2bac5e07e
...
Also switch to kmod-ath10k-ct, so we can drop our AP+IBSS patch.
2016-07-19 22:39:24 +02:00
Matthias Schiffer
267b9bd018
ar71xx-generic: add support for TP-Link TL-WR842N/ND v3 (untested)
2016-07-03 22:27:38 +02:00
Matthias Schiffer
634997ec87
Add target ramips-mt7621 with model D-Link DIR-860L B1
...
Needs more testing, high packet loss at the moment.
2016-07-03 21:56:32 +02:00
Matthias Schiffer
6b644df4ae
brcm2708-*: remove BROKEN
2016-06-29 16:50:54 +02:00
Christian Tramnitz
fb8c7a8baf
sunxi: add Banana Pro ( #802 )
...
build-tested with 2016.1.4, boots but packet loss on eth0
omitted ata due to build errors
2016-06-23 01:05:54 +02:00
Matthias Schiffer
bae721a9bb
Add target ar71xx-mikrotik
...
Fixes #121
Based-on-patch-by: Tobias Hachmer <tobias@hachmer.de>
2016-06-23 00:29:28 +02:00
Sven Eckelmann
fa04fff88d
ar71xx-generic: Add support for OpenMesh MR1750v2
...
The new MR1750v2 device support is only available in LEDE master. The
relevant patches have to backported to add support for them in Gluon
Signed-off-by: Sven Eckelmann <sven.eckelmann@open-mesh.com>
2016-06-17 20:04:00 +02:00
Sven Eckelmann
3ccd516971
ar71xx-generic: Add support for OpenMesh OM2P-HSv3
...
The new OM2P-HSv3 device support is only available in LEDE master. The
relevant patches have to backported to add support for them in Gluon
Signed-off-by: Sven Eckelmann <sven.eckelmann@open-mesh.com>
2016-06-17 20:04:00 +02:00
Matthias Schiffer
7a2dd8b3e4
Revert "ar71xx: backport fixes for better CPE210/510 support"
...
This reverts commit ffd1f0b3a5
2016-06-17 11:21:39 +02:00
Jan Niehusmann
1059a798ef
ar71xx: add GL-AR150 support
...
Mainly applying a vendor patch from https://github.com/domino-team/OpenWrt-patches
(https://raw.githubusercontent.com/domino-team/OpenWrt-patches/master/AR150%2C%20AR300%2C%20Domino%20-%20CC1505/000-gl-ar150-cc.patch )
2016-06-15 15:04:04 +02:00
Matthias Schiffer
ffd1f0b3a5
ar71xx: backport fixes for better CPE210/510 support
...
This patchset enables the RX LNA for the CPE210/510, improving RX by about
20dB. The profiles for CPE210 and CPE510 is split into two images, so the
CPE510 can use the correct ART offset, improving the TX power by 10dB.
Fixes #796
2016-06-09 05:53:57 +02:00
