Christoph Krapp
68ee56b869
ar71xx: add support for GL.iNet GL-AR750 ( #1395 )
2018-05-17 22:33:18 +02:00
Christoph Krapp
eaa23aeae6
ar71xx: add support for TP-Link TL-WR940N v6 ( #1389 )
2018-05-17 01:33:52 +02:00
Andreas Ziegler
59d6b2a4ee
ramips-rt305x: correct alphabetical order
2018-05-09 04:00:02 +02:00
Matthias Schiffer
5bd1d88f85
ar71xx-generic: make ubiquiti-rocket-m a separate device
...
Make ubiquiti-rocket-m a separate device rather than a bullet-m alias to
enable USB support and allow adding devive-specific packages.
2018-05-08 18:39:18 +02:00
David Bauer
22d45448fd
ar71xx: add support for Fritz!Box 4020
...
This commit adds support for the AVM Fritz!Box 4020 WiFi-router.
SoC: Qualcomm Atheros QCA9561 (Dragonfly) 750MHz
RAM: Winbond W971GG6KB-25
FLASH: Macronix MX25L12835F
WiFi: QCA9561 b/g/n 3x3 450Mbit/s
USB: 1x USB 2.0
IN: WPS button, WiFi button
OUT: Power LED green, Internet LED green, WLAN LED green,
LAN LED green, INFO LED green, INFO LED red
UART: Header Next to Black metal shield
Pinout is 3.3V - RX - TX - GND (Square Pad is 3.3V)
The Serial setting is 115200-8-N-1.
Tested and working:
- Ethernet (LAN + WAN)
- WiFi (correct MAC)
- Installation via EVA bootloader
- OpenWRT sysupgrade
- Buttons
- LEDs
Not working:
- USB port
Installation via EVA:
In the first seconds after Power is connected, the bootloader will
listen for FTP connections on 169.254.157.1 (Might also be 192.168.178.1). Firmware can be uploaded
like following:
ftp> quote USER adam2
ftp> quote PASS adam2
ftp> binary
ftp> debug
ftp> passive
ftp> quote MEDIA FLSH
ftp> put openwrt-sysupgrade.bin mtd1
Note that this procedure might take up to two minutes. After transfer is
complete you need to powercycle the device to boot OpenWRT.
Signed-off-by: David Bauer <mail@david-bauer.net>
2018-05-08 15:20:02 +02:00
Andreas Ziegler
1531571a7e
targets/ipq806x: use ath10k-firmware-qca99x0-ct for 11s and remove BROKEN flag
2018-05-07 00:03:04 +02:00
Matthias Schiffer
a2eb50e0e6
x86: move common parts of x86-generic and x86-64 to include file
2018-04-26 22:59:36 +02:00
Matthias Schiffer
818acd6021
x86: remove bash and wget again
...
Let's keep the default package selection to hardware support.
2018-04-26 22:55:36 +02:00
Andreas Ziegler
563f351b78
x86: add packages: leds, sensors, gpio, usb, wifi and tools
2018-04-26 20:54:49 +02:00
Matthias Schiffer
02f905f542
ar71xx: build kernel modules used by Gluon into the kernel
...
ar71xx-generic and -tiny benefit most from the optimized kernel, as they
contain all devices with 32MB RAM. We enable CONFIG_GLUON_SPECIALIZE_KERNEL
for all targets using the mips24_kc architecture so packages shared between
targets don't need to be rebuild all the time.
2018-04-13 17:32:20 +02:00
Matthias Schiffer
d210cfcad9
generic: do not attempt to build kmod-usbip
...
kmod-usbip is broken since the last kernel update.
2018-04-10 20:25:38 +02:00
Andreas Ziegler
91912f4935
ar71xx-tiny: add support for TP-Link TL-WR940N v5
...
adding an alias as it uses the same image as the TL-WR940N v4
2018-03-19 23:34:45 +01:00
Jan-Tarek Butt
be286c4c69
ar71xx-generic: set unifi-ac-lr alias on ac-lite
2018-02-20 15:22:21 +01:00
Andreas Ziegler
4315ef7a1f
sunxi: cleanup BROKEN flag formatting
2018-02-07 04:03:00 +01:00
Julian
167e1b34dc
sunxi: LeMaker Banana Pi: remove BROKEN ( #1325 )
2018-02-06 18:24:46 +01:00
Vincent Wiemann
273a60fe62
ramips-mt7621: Add support for ZBT-WG3526-32M ( #1296 )
...
including backport of mtd patches.
The general flash issue (32MB) was discussed here:
https://gist.github.com/dmke/d389bc364b3f73f525076eaee0019dc1
The resulting patch was the following:
http://lists.infradead.org/pipermail/linux-mtd/2016-December/070889.html
Another patch by nbd168 added the required mtd read operations for supporting ZBT-WG3526-32M:
https://github.com/lede-project/source/commit/22d982e#diff-3835f027e16e6416090c1833bc732af3
2018-02-04 17:42:48 +01:00
Matthias Schiffer
87ced3c5c6
modules: update LEDE
...
b1205a9211 ar71xx: /lib/ar71xx.sh: add model detection for TP-Link TL-WR810N
fbeae9d891 iptables: make kmod-ipt-debug part of default ALL build
6ea9a702c5 iptables: Fix target TRACE issue
00fa1e4108 curl: fix libcurl/mbedtls async interface
d5278cc48b kernel: bump 4.4 to 4.4.112 for 17.01
2ae0741f3b dnsmasq: backport validation fix in dnssec security fix
58d60bd283 dnsmasq: backport dnssec security fix for 17.01
d626aa005b mountd: bump to git HEAD version
f0336975be kernel: bump 4.4 to 4.4.111 for 17.01
fb6f21c657 kmod-sched-cake: bump to latest cake bake for 17.01
2e8a3bb35f ar71xx: Netgear WNR2000v4: do not include USB packages [17.01]
3fa86282fa build: fix restoring /etc/opkg with PER_DEVICE_ROOTFS
987a7e3175 ramips: fix lenovo newifi-y1 switch and LED config
dbb5ffaed5 ramips: firewrt: indicate boot status via LED
2018-02-03 14:17:29 +01:00
Matthias Schiffer
ff073f55d8
Merge pull request #1318 from rotanid/target-cleanup
...
target files cleanup: variable checks and comments
2018-01-27 13:04:15 +01:00
Andreas Ziegler
e9362cb724
targets: update & cleanup reasons for BROKEN flags
2018-01-26 14:17:44 +01:00
Andreas Ziegler
e92140c593
targets: remove check if ATH10K_PACKAGES is set
...
as GLUON_WLAN_MESH now is set by default, ATH10K_PACKAGES is set by default, too
2018-01-26 14:17:35 +01:00
Matthias Schiffer
07dbfea617
gluon-site: disable multidomain support by default
2018-01-26 12:32:46 +01:00
Matthias Schiffer
faceb3932c
config: check if GLUON_DEBUG is 1 rather than nonempty
2018-01-26 12:32:46 +01:00
Andreas Ziegler
a99fdf7919
ramips-mt7621: Netgear WNDR3700v5 has no factory image
...
fixes build after 3ec63b8c
2018-01-26 01:45:49 +01:00
Andreas Ziegler
d586720c5c
ar71xx-generic: add support for Ubiquiti NanoBeam M5
...
marked as BROKEN for now as it is untested
related issue: #1099
2018-01-20 15:38:49 +01:00
Andreas Ziegler
c4e3cca1d3
ar71xx-tiny: add support for TP-Link TL-WR802N v1
...
marked as BROKEN for now as it is untested
2018-01-19 23:47:36 +01:00
Andreas Ziegler
708aae5015
ar71xx-generic: add support for TP-Link TL-WR810N
...
marked as BROKEN for now as it is untested
2018-01-19 23:47:31 +01:00
Andreas Ziegler
3ec63b8c70
ar71xx-generic: add support for Netgear WNDR3700v5
...
fixes #442
2018-01-19 20:45:29 +01:00
David Bauer
99b02701cc
ar71xx: add support for TP-Link Archer C58/C59/C60 ( #1281 )
2018-01-16 18:51:12 +01:00
Andreas Ziegler
fb93c3b259
ar71xx: correct model name for TL-WR1043N v5, fixes #1307
2018-01-16 18:30:37 +01:00
Tata
919dda90b3
build: introduce GLUON_WLAN_MESH build variable ( #1298 )
...
defaults to 11s, allowing to build devices without IBSS-support
obsoletes GLUON_ATH10K_MESH
2018-01-10 15:49:33 +01:00
David Bauer
9273e56c63
ar71xx: add support for TP-Link Archer C7 v4 ( #1289 )
2018-01-03 16:50:23 +01:00
Jan-Tarek Butt
f514ec13b5
brcm2708-bcm2709: add manifest_alias for raspberry-pi-2-model-b-rev-1.1
2017-12-27 03:06:19 +01:00
Jan-Tarek Butt
7b61cb16f8
brcm2708-bcm2708: add manifest_alias for raspberry-pi-model-b-rev-2
...
Signed-off-by: Jan-Tarek Butt <tarek@ring0.de>
2017-12-27 03:05:53 +01:00
David Bauer
70784cb3b2
ar71xx: add support for TP-Link TL-WR1043N v5 ( #1279 )
2017-12-19 04:22:44 +01:00
Steffen Förster
9136562517
ramips-rt305x: add D-Link DIR-615 rev D1-D4
2017-12-08 00:00:35 +01:00
kb-light
17d1c65610
ramips-mt7621: do not tag ubnt-erx(-sfp) as broken
...
There is no wifi, so there is no bad wifi.
[Matthias Schiffer: rebase onto master]
2017-11-26 12:46:20 +01:00
Karsten Böddeker
64cfd648cb
ramips-mt7621: add support for UBNT EdgeRouter X-SFP
...
[Matthias Schiffer: remove patch "ramips: simplify ubnt-erx-sfp device
definition", as it depends on other patches that have not been backported]
2017-11-26 12:44:52 +01:00
Andreas Ziegler
1ca402ee46
ramips-mt7621: ZBT-WG3526 has no factory image
2017-11-23 03:09:03 +01:00
Andreas Ziegler
14ef0387ea
ramips-mt7621: add ZBT-WG3526
2017-11-23 03:05:58 +01:00
Andreas Ziegler
a040ec0083
ar71xx: add TP-Link Archer C25 ( #1238 )
...
BROKEN because of stability issues with 5GHz enabled.
2017-10-22 01:43:20 +02:00
Matthias Schiffer
08cbbf9925
build: move all generic config generation to targets/generic
...
As the default package list is now handled using the 'packages' directive,
explicit wpad-mini removals in target definitions can be dropped.
2017-09-07 03:21:42 +02:00
Matthias Schiffer
587c5016cb
build: handle generic and target-specific config in the same run of target_config{,_check}.sh
...
This, together with a new try_config directive, will allow checking the
generic config and make it more flexible.
2017-09-07 00:17:57 +02:00
Steffen Förster
b325f00599
ramips-mt7620: add new subtarget with some Gl.Inet devices
2017-09-06 20:58:51 +02:00
hexa-
c3c6ea0cd7
brcm2708: drop wpad-mini as it clashes with hostapd-mini ( #1205 )
2017-08-13 21:43:57 +02:00
Steffen Förster
e395284156
brcm2708: add target and platform for raspi3 ( #1204 )
...
This device has built in wifi we should include it at least for experiments.
2017-08-13 15:53:11 +02:00
Matthias Schiffer
085cf0debf
ar71xx-generic: add alias for Ubiquiti UniFi Mesh
...
Fixes #1021
2017-08-08 12:08:09 +02:00
Linus Lüssing
23a8947628
Revert "generic: batman-adv: disable multicast optimizations for now"
...
This reverts commit 819758f425
.
A proper fix is now available, therefore reverting this workaround.
2017-08-07 22:07:14 +02:00
Matthias Schiffer
6e039911ab
generic: don't explicitly enable busybox sha256sum applet
...
LEDE has sha256sum enabled by default.
2017-07-03 03:49:03 +02:00
Matthias Schiffer
102f6a7244
Revert "generic: busybox: enable sha512sum to workaround segfault issue"
...
This reverts commit dcff68029e
.
2017-07-03 01:45:21 +02:00
Matthias Schiffer
86636c3ae6
ramips-rt305x: add D-Link DIR-615 H1
...
Fixes #1164
2017-06-29 18:28:16 +02:00