d9244a1b5b generic: ar8216: fix unknown packet flooding for ar8229/ar8236
429e4490c4 libpcap: fix library packaging issues
e678cb1595 kernel: bump 4.14 to 4.14.179
8fa4ed9ef7 fstools: update to the latest version
5c6dfb5bc0 fstools: update to the latest version
607809dcdc mac80211: Update to version 4.19.120
96d280cc37 scripts/download: add sources CDN as first mirror
55ccb04046 upgs: Remove extra _DEFAULT_SOURCE definition
ee480c50c1 dante: Fix compile with glibc
5f0e25d966 perf: build with NO_LIBCAP=1
005adba939 mac80211: ath10k: increase rx buffer size to 2048
0974d59b5f kernel: backport fix for non-regular inodes on f2fs
f40947a8c0 ath79: indicate boot/failsafe/upgrade for NanoBeam/Nanostation AC
65cf72d5d2 ath79: add SUPPORTED_DEVICES based on ar71xx for some devices
f9ef0c5705 kernel: bump 4.14 to 4.14.178
2df0ea042d wpad-wolfssl: fix crypto_bignum_sub()
ec6cb33452 mac80211: backport fix for an no-ack tx status issue
f141cdd200 hostapd: unconditionally enable ap/mesh for wpa-cli
54b6683390 wireless-regdb: backport three upstream fixes
55591e63bc curl: backport fix for CVE-2019-15601
35ea808b97 uboot-kirkwood: fix ethernet and usb
Compile-tested: all targets
This patch fixes a regression introduced in kernel v4.14. While the
commit message only mentions a performance penalty, the issue is
suspected to be the cause of spurious data bus errors on MIPS CPUs
(ar71xx target).
Fixes: #1982
Before, only frames with a maximum size of 1528 bytes could be
transmitted between two 802.11s nodes.
For batman-adv for instance, which adds its own header to each frame,
we typically need an MTU of at least 1532 bytes to be able to transmit
without fragmentation.
This patch now increases the maxmimum frame size from 1528 to 1656
bytes.
Tested with two ath10k devices in 802.11s mode, as well as with
batman-adv on top of 802.11s with forwarding disabled.
Fix originally found and developed by Ben Greear.
6160f773fef2 ipq40xx: add support for AVM FRITZ!Repeater 1200
63b1e8f8d226 ipq-wifi: add AVM FRITZ!Repeater 1200 bdf
496489ea95af uboot-fritz4040: update to latest HEAD
e30ca0d90a98 mac80211: update to version 4.19.85
b1ef0e443720 layerscape: Fix kernel patch
ad0463c2e875 kernel: Add missing configuration option
b0adf79c9e7c firewall: update to latest Git HEAD
b41619592792 firewall: update to latest git HEAD
3685f86cefac cns3xxx: use proper macros for defining partition regions
db345220b485 kernel: bump 4.14 to 4.14.155
538ca42ddad8 wireless-regdb: fix build when python2 from package feeds exists
2751c5c75219 wireless-regdb: fix patch fuzz
d6ecadb05c2b wireless-regdb: fix Makefile indentation
0a4071b550eb wireless-regdb: set PKGARCH:=all
e8d528af7e91 wireless-regdb: prefer python provided by make variable
53d8de0207e8 wireless-regdb: Make it build with python2
f2ef9b4feafe wireless-regdb: update to 2019.06.03
8fac0b398c34 ar71xx: fix buttons for TP-Link TL-WDR4900 v2
3c65c47ce6fd ar71xx: fix LED setup for TL-WDR4900 v2
b6c80f85cb7b ramips: set uImage name of WeVO 11AC NAS and W2914NS v2
e945c43142ab ar71xx: fix MAC address setup for TL-WDR4900 v2
8a21bc36229d ar71xx: fix MAC addresses for Archer C5 v1, C7 v1/v2, WDR4900 v2
As of OpenWrt commit b3d8b3ab8e6f ("mac80211: set noscan=1 if sta/adhoc/
mesh interfaces are present"), the issue workarounded by this patch cannot
occur anymore.
Instead of unconditionally loading this module on boot the gluon_bat0
netifd protocol script will later take care of loading either the
batman-adv or batman-adv-legacy module, depending on the configured routing
algorithm in UCI.
This updates the batman-adv OpenWrt package to the current version
provided in the master branch of the openwrt-routing packages
repository:
* e26096a batman-adv: Fix duplicated OGMs on NETDEV_UP
* 1ff00ee batman-adv: upgrade package to latest release 2019.2
Small difference to the original:
* Compat code for batadv_genl_dump_check_consistent()
* Compat code for cfg80211_sinfo_release_content()
* 0001-batman-adv-add-compat-hacks.patch kept
* batctl dependency kept removed
* config related files unchanged
The new config format was not backported yet to keep this patch small
and less invasive.
Signed-off-by: Linus Lüssing <linus.luessing@c0d3.blue>
The factory firmware omits the JFFS2 end-marker while flashing via
web-interface. Add a 64k padding after the marker fixes this problem.
When the end-marker is not present, OpenWRT won't save the overlayfs
after initial flash.
This always pulls in the batman-adv compat 15 kernel module. However,
batctl works just as well with batman-adv-legacy (compat 14).
Signed-off-by: Linus Lüssing <linus.luessing@c0d3.blue>
If no mcast_rate is set for the wifi-iface then there is no rate_idx (0)
set for the bss. This breaks for example 5GHz meshpoint interfaces because
0 maps to a CCK rate (11Mbit/s).
It must also be avoided that the ath10k-ct internal state for the rates is
not synced with the mac80211 rates state. Otherwise, the user specified
rate (e.g. a wifi-iface mcast_rate for a meshpoint interface) will only be
set on startup. And a short while after that, ath10k-ct specific code in
ath10k_check_apply_special_rates is missing a valid rate in its own
structures and is then recalculating a new default rate. This default rate
is in most situations not the requested rate.
Fixes: a399b60735 ("ath10k/ath10k-ct: support multicast and management rate control")
Drivers with software rate control can directly use the selected multicast
rate for multicast/broadcast frames and the minimal basic rate for
management frames. But drivers with offloaded rate control algorithms must
be informed about such upper layer decisions to configure the
hardware/firmware.
A new BSS_CHANGED_MCAST_RATE is introduced in mac80211 to automatically
inform all drivers. ath10k can detect this event and forward it via WMI to
the driver. The already existing BSS_CHANGED_BASIC_RATES can be used to
select the management rate.
Without the WMI commands, a low rate (not necessarily one from the basic
rates) is used for bcast/mcast/management frames. This means that the
/etc/config/wireless settings basic_rate and mcast_rate would have no
effect on the rates selected by this driver for the mentioned frames.
This backports the TP-Link Archer C50 v4.
We are dropping the following upstream commits. They add support for the
TP-Link recovery-flag which enabled the web-recovery. As they are not
needed for the router to work, we drop them for now.
28cd2ca base-files: sysupgrade: support additional mtd options
1e06482 mtd: add logic for TP-Link ramips recovery magic
6e16dd1234 mt76: update to the latest version
76037756d0 kernel: bump 4.14 to 4.14.94
455bfd1065 kernel: bump 4.9 to 4.9.151
fafd7691e6 opkg: update to latest Git head
e789bd2243 opkg: drop argument from check_signature in opkg.conf
3603c2321d ramips: mt7621: fix 5GHz WiFi LED on ZBT WG3526
7f98cd8d50 odhcpd: fix onlink IA check (FS#2060)
abd0f7995e kmod-sched-cake: bump to latest cake
Compile-tested: ar71xx-{tiny,generic}, ramips-mt7621, x86-64
6f74e269c8 kernel: bump 4.14 to 4.14.87
b2f243394e kernel: bump 4.9 to 4.9.144
2213b20aee kernel: bump 4.14 to 4.14.86
bcd7644007 kernel: bump 4.9 to 4.9.143
d5afaa4114 openvpn: re-add option comp_lzo
629073e86d rpcd: update to latest Git head
1cd945ea22 ramips: fix leds on GL.iNet GL-MT300N-V2
fbadfecbb5 ipq40xx: fix openmesh sysupgrade with tar content out of order
06a20afb34 rules.mk: fix syntax error
d40e90986c rules.mk: add INSTALL_SUID macro
d40de11d1b base-files: fix prerm return value, align with postinst code
cc8e875039 sdk: find kernel modules when KDIR is a symlink
a8b292afe6 uhttpd: update to latest Git head
7a8b75375c uhttpd: support multiple Lua prefixes
fede6df09e uhttpd: update to latest Git head
9671a2d2c8 apm821xx: MBL: load kernel/dtb from SATA 0:1 first
26ebcc88e3 apm821xx: wndr4700: restore sd-card media detection
5337319bdf uclient: update to latest Git head
Compile-tested: ar71xx, ipq40xx, x86-64
Runtime-tested: ar71xx
ath10k-ct uses a rather high number of buffers to communicate with the
QCA/Candelatech firmware. Especially the HTC (host-target-communication)
and HTT (host-target-transport) can take up a lot of memory when data is
transferred over a ath10k wifi link.
Even a 256MB device with three radios can go OOM (while sending to three
devices using UDP unicast/multicast packets) with the default buffer
limits. Unfortunately, this also reduced the maximum 5GHz throughput on an
IPQ40xx device from 494/432 Mbit/s for TCP transfers (download/upload) to
438/343 Mbit/s. These throughput values should still be good enough for a
Freifunk installation. And these changes are already used by ath10k in
OpenWrt 18.06.
bc7abe8729f3 include/kernel-build.mk: fix kernel rebuild on backport patch changes
c99c70e05303 kernel: backport page fragment API changes from 4.10+ to 4.9
This commit makes use of the Power-LED as Diag-LED, allowing the LED to
work as a status indicator for config-mode.
Signed-off-by: David Bauer <mail@david-bauer.net>
b6a1f43075f9 base-files: fix UCI config parsing and callback handling
6734f32d91cd mtd: add build hack to reintroduce shared mtd for older releases
aaac9e82aa60 mtd: mark as nonshared to fix FS#484
0fee4906d5c0 ustream-ssl: update to latest git HEAD
f34a0756fd94 ustream-ssl: update to latest git HEAD
98b9d8a3d3fd mbedtls: Activate the session cache
88ba88e5adc4 mbedtls: update mbedtls to version 2.7.3
Most of the implementations behind cfg80211_get_station will not initialize
sinfo to zero before manipulating it. For example, the member "filled",
which indicates the filled in parts of this struct, is often only modified
by enabling certain bits in the bitfield while keeping the remaining bits
in their original state. A caller without a preinitialized sinfo.filled can
then no longer decide which parts of sinfo were filled in by
cfg80211_get_station (or actually the underlying implementations).
cfg80211_get_station must therefore take care that sinfo is initialized to
zero. Otherwise, the caller may tries to read information which was not
filled in and which must therefore also be considered uninitialized. In
batadv_v_elp_get_throughput's case, an invalid "random" expected throughput
may be stored for this neighbor and thus the B.A.T.M.A.N V algorithm may
switch to non-optimal neighbors for certain destinations.
A reference to the best gateway is taken when the list of gateways in the
mesh is sent via netlink. This is necessary to check whether the currently
dumped entry is the currently selected gateway or not. This information is
then transferred as flag BATADV_ATTR_FLAG_BEST.
After the comparison of the current entry is done,
batadv_*_gw_dump_entry() has to decrease the reference counter again.
Otherwise the reference will be held and thus prevents a proper shutdown of
the batman-adv interfaces (and some of the interfaces enslaved in it).
Fixes: 899235a4a637 ("Merge pull request #241 from ecsv/batman-adv-2016.4-maint-2016-10-29")
Reported-by: Andreas Ziegler <dev@andreas-ziegler.de>
Signed-off-by: Sven Eckelmann <sven@narfation.org>
This commit adds support for the AVM Fritz!Box 4020 WiFi-router.
SoC: Qualcomm Atheros QCA9561 (Dragonfly) 750MHz
RAM: Winbond W971GG6KB-25
FLASH: Macronix MX25L12835F
WiFi: QCA9561 b/g/n 3x3 450Mbit/s
USB: 1x USB 2.0
IN: WPS button, WiFi button
OUT: Power LED green, Internet LED green, WLAN LED green,
LAN LED green, INFO LED green, INFO LED red
UART: Header Next to Black metal shield
Pinout is 3.3V - RX - TX - GND (Square Pad is 3.3V)
The Serial setting is 115200-8-N-1.
Tested and working:
- Ethernet (LAN + WAN)
- WiFi (correct MAC)
- Installation via EVA bootloader
- OpenWRT sysupgrade
- Buttons
- LEDs
Not working:
- USB port
Installation via EVA:
In the first seconds after Power is connected, the bootloader will
listen for FTP connections on 169.254.157.1 (Might also be 192.168.178.1). Firmware can be uploaded
like following:
ftp> quote USER adam2
ftp> quote PASS adam2
ftp> binary
ftp> debug
ftp> passive
ftp> quote MEDIA FLSH
ftp> put openwrt-sysupgrade.bin mtd1
Note that this procedure might take up to two minutes. After transfer is
complete you need to powercycle the device to boot OpenWRT.
Signed-off-by: David Bauer <mail@david-bauer.net>
999bb66b20b0 kernel: add missing in6_dev_put_clear call to an ipv6 network patch
81573ea25924 kernel: bump kernel 4.4 to 4.4.129 for 17.01
afa887388766 gcc: gcc 6.3.0 fix comparison between pointer and integer
efb6ca189641 base-files: /lib/functions.sh: ignore errors in insert_modules
b5ba01a0d3f6 fstools: update to latest lede-17.01 branch
a9b607740273 kernel: bump kernel 4.4 to 4.4.126 for 17.01
09d95e44fc3d mbedtls: change libmbedcrypto.so soversion back to 0
4673a0bffc89 kernel: mtd: bcm47xxpart: improve handling TRX partition size
Also switch to the upstreamed version of "kernel: disable accept_ra by
default".
9b0a4bafbce7 base-files: tune fragment queue thresholds for available system memory
b47094ce96ff include/package-defaults.mk: fix default Build/Prepare with empty ./src
75be005e8bdc include/rootfs.mk: retain list of conffiles with CONFIG_CLEAN_IPKG
696c6325a3a7 include/rootfs.mk: do not remove opkg prerm scripts during rootfs preparation
17c0362178ca base-files: sysupgrade: do not rely on opkg to list changed conffiles
2ae9ebf37402 kernel: bump 4.4 to 4.4.120 for 17.01
571d3def6baf x86: add preinit hook to reload microcode
681aaaf719ec firmware: add microcode package for Intel
c6314ee06f94 firmware: add microcode package for AMD
222521d5937a tools: add iucode-tool
f7a6b6724a63 x86: enable microcode loading for Intel and AMD
dfe620cb93c0 odhcpd: fix interop with wide DHCPv6 client (FS#1377)
18c999a6ff33 base-files: fix off-by-one in counting seconds for factory reset
92ea65b36aa7 sunxi: disable LPAE to allow kernel to run on A13
7dcbe0e22dbb bcm53xx: fix fallback code for picking status LED
4db583b9c2ab mountd: update to the latest version from 2018-02-26
The first one adds a fix that might potentially result in multicast packet
loss once we would enable multicast_mode again.
The second one avoids some small but unnecessary overhead. More
importantly though, it is supposed to ease further multicast improvements
later (e.g. no need for a multicast sending node to determine overlap
between WANT_ALL_IPV4/6 flags and TT entries while on fast-path).
Signed-off-by: Linus Lüssing <linus.luessing@c0d3.blue>
788312ca59c5 uqmi: ensure CID is a numeric value before proceeding
b934aa2f2144 kernel: update 17.01 kernel to 4.4.116
b3b16c8ce5c6 uqmi: use built-in command for data-link verification
e9eb219e5a07 uqmi: use correct value for connection checking
5661ac1de4d8 uqmi: use general method for state cleaning
7c259fb98018 uqmi: silence error on pin verification
046222dfaf12 uqmi: fix raw-ip mode for newer lte modems
0393009ec84e net: uqmi: fix blocking in endless loops when unplugging device
31ae7381b8db kernel: refresh patches
3b227103e6a3 kernel: backport raw-ip mode for newer QMI LTE modems
f60be720772c base-files: don't evaluate block-device uevent
623cdc4ffeef ramips: backport mt7530/762x switch fixes
b15d54e659b4 perf: use libunwind
566ff9e6ee69 libunwind: enable build for arm
This is needed for the Gluon ARP limiter to work without hiccups in
traffic.
Link: https://patchwork.ozlabs.org/patch/841210/
Signed-off-by: Linus Lüssing <linus.luessing@c0d3.blue>
Also disabling TX checksums and not only allowing incoming packets without
checksum will provide another small speedup. As doing so would break wired
meshing with VXLAN-enabled nodes that require non-zero checksums, we will
wait a few days before this step.
c3cdc53164 ag71xx: Fix rx ring buffer stall on small packets flood on qca956x and qca953x.
e07ee06aad ar71xx: QCA956X: add missing register
7bc25dfa63 mvebu: fix mvneta build with Linux 4.4.110
541a1a7ff5 lantiq: activate noise margin delta for VDSL too
dea8979a81 Lantiq: make possible to tweak DSL SRN from UCI
9934231670 libubox: update to latest lede-17.01 git HEAD
7f5a040359 kernel: update kernel 4.4 to version 4.4.110
ddedcb19e5 brcm47xx: relocate the stack in loader
da43069f5b brcm47xx: relocate loader to higher address
f19416ae9d fstools: backport fix from master branch
55c23e44f4 procd: update to latest git HEAD
ffbbcc9b34 brcm47xx: image: build firmware for Asus WL-500g Deluxe
0426596453 Revert "iptables: fix nftables compile issue (FS#711)"
da126d557c iptables: fix nftables compile issue (FS#711)
473e994571 rpcd: backport version 2017-12-07 from master
b833944eb2 uci: update to HEAD of lede-17.01 branch
dca4dfacf2 iproute2: cake: fix patch format error
ee55629a30 kernel: bump 4.4 to 4.4.108 for 17.01
c4e9487cf5 iproute2: cake: support new operating modes for 17.01
4f1dca9eca kmod-sched-cake: bump to latest bake of cake for 17.01
959a49dc15 ramips: fix widora neo diag led
a1908023cc base-files: fix logic when to show failsafe banner
1c9299877b base-files: set FAILSAFE in /etc/profile when /tmp/.failsafe exists
2603c85060 wireguard: bump to 20171221
f8a441e020 kernel: bump 4.4 to 4.4.107
ceea0ac25d wireguard: bump to 20171211
ebb54740c7 brcm47xx: remove target specific network preinit config
b41d154f50 rules.mk: export TMPDIR
e719a08cc1 usbutils: Update usb.ids file to latest
4cfcfecf76 hostapd: remove unused local var declaration
796bc21023 hostapd: don't set htmode for wpa_supplicant
50147d41b9 libnl-tiny: use fixed message size instead of using the page size
0625814426 packages: nvram: fix memory leak in _nvram_free
0f175041ad mac80211: don't pass the hostapd ctrl iface in adhoc
05f0fac189 hostapd: explicitly set beacon interval for wpa_supplicant
7f78a86254 hostapd: set mcast_rate in mesh mode
c315843f88 igmpproxy: remove firewall rules when service is stopped
91e48304a9 openvpn: add support to start/stop single instances
e5c284bb81 package/elfutils: add CFLAG -Wno-format-nonliteral
dde29b2b01 tools/coreutils: install readlink
2f75641b1f uhttpd: fix query string handling
79024cd3be openssl: fix cryptodev config dependency
bead60c2d3 uqmi: replace legacy command invoke with newer type
5872c19c63 procd: Always tell cmake whether to include seccomp support or not
cd901ef1a6 libunwind: disable building with ssp
1aedf2f149 tools/squashfs: use host cflags
7fa70027d4 ppp: make the patches apply correctly again
d63eb474b3 ppp: fix compile warning
9bd667fc24 dropbear: fix PKG_CONFIG_DEPENDS
9d1bfb8f4d dropbear: make ssh compression support configurable
ed4f4f1a8e procd: Install seccomp-trace symlink
77e79b2dd0 openvpn: update to 2.4.4
5beb0abc83 build: remove @ as it's causing an error
eff1f7e7ef usbutils: avoid duplicating the git revision
9cf371c1f4 dnsmasq: Pass TARGET_CPPFLAGS to Makefile
2f80d84638 wwan: json format in some modem definitions
c61cf4a447 base-files: add /etc/profile.d to conffiles
bdc998c696 base-files: order conffiles alphabetically
c58e824acc procd: mdns: Support txt values with spaces
aaa73fea36 ar71xx: fix switch port numbering on RB750r2 and RB750UPr2
b69ea02a00 scripts/dowload.pl: use glob to expand target dir
80a22eee4b samba36: Remove syslog and load printers lines.
71797b6eca samba36: Don't resolve interfaces.
1458bc2d9c samba36: Remove guest ok since LuCI configures it.
f0065554b2 config: make CONFIG_ALL_* select other CONIFG_ALL_* options
2b88309335 nvram: add help message for nvram magic not found
118a2ea0bc nvram: improve argument check when program start
c446ee4ad4 nvram: add usage() function
9e84d333b1 nvram: fix memory leak
3b6b892d67 ca-certificates: Update to 20170717
23b9dc2eca base-files: drop unused preinit_echo function
ca7c9db47f tools/pkg-config: Update to 0.29.2
75d8127338 base-files: suppress uci not found output in login.sh
b616aa6db7 scripts/package-metadata.pl: inhibit compile deps on missing build types
2e1a87a3e1 build: bundle-libraries.sh: do not override argv[0] in inner exec calls
a37f8b0c6e samba36: Remove legacy options
89c4f47caa scripts/download.pl: Adjust URLs
338968a170 build: fix invocation of bundled ld.so in SDK and Imagebuilder
0a976262a5 kmod-sched-cake: drop maintainer
610e2afdcc zlib: use default Build/Configure rule
cf11a41af6 lzo: use default Build/Configure rule
c86490605c netfilter: add iptables-mod-rpfilter package
ea23ba9a25 bzip2: add symlink to binary
d413c75d24 dropbear: add option to set max auth tries
8693ab5152 dropbear: server support option '-T' max auth tries
0e6a6c8487 hostapd: configure NAS ID regardless of encryption
ef3649d90e hostapd: add acct_interval option
3027a68093 valgrind: bump to 3.13.0
3129db331c busybox: backport 'ip rule suppress_{prefixlength, ifgroup}'
86158ad37d libunwind: update to version 1.2.1
59004433e9 imagebuilder: don't rewrite package list output
74eeb07817 imagebuilder: clean package_list
7f3f2bc03b build: remove old kernel-headers build directories
c7234e3036 imagebuilder: add package_list function
9c3e4b5434 base-files: board.json's switch reset means existence, not argument
7d1f4073ce gdb: remove Build/Compile rule ; default one works
9a99039989 rb532: enable high-res timers, refresh kernel config
e802cbfc25 xburst: enable high-res timers, refresh kernel config
e01367e3af kernel: add CONFIG_SCHED_HRTICK=y to the generic config
6e1e2e7b96 package/grub2: update to 2.02
13a5568d6e ip17xx: correct aneg_done return value
816fb3433b mvswitch: fix autonegotiation issue
41ee45428b ppp: propagate master firewall zone to dynamic slave interface
a44c44077e usbmode: remove devices with unsupported modes
e8bd0a606a tar: override symlink permissions
59a1c1675d tools/sparse: Update to snapshot 2017-03-31
a6e5943a2a elfutils: Pass -Wno-unused-result to silence warnings as errors
08070221ed gcc: fix documentation entries added by 910-mbsd_multi.patch
ef43c04c34 scripts/download.pl: print the command used to download files
6e09b20563 tools/libressl: update to 2.5.4
08be74f699 tools/isl: update to 0.18
26ea59cd01 lldpd: bump to 0.9.7
444b64f533 libunwind: update to 1.2
e5612d6640 lantiq: spi: double time out tolerance
28c350f2f0 base-files: fix default procd reload
108a42bcba ramips: support jumbo frame on mt7621 up to 2k
8d4c047dd1 lldpd: drop specific respawn params [use system-wide]
8ee15ed61a elfutils: bump to 0.169
9754a9c606 devel/trace-cmd: Update to 2.6.1
79def69047 comgt-3g: enable modem before to setpin
070463fb61 devel/strace: Update to 4.16
67caf6bbce network/utils/ipset: Update to 6.32
f0a493160c mac80211: gracefully handle preexisting VIF
827f108b42 scripts: Probe external toolchains for libthread-db
bb9eb2c96e build: new fixes for symlinked .config handling
4607007a86 build: allow val.% targets to bypass the prepare steps
90575776b7 x86: keep /boot mounted for kexec
6b9eb0c73a hostapd: fix reload frequency change patch
040ff6fdbd build: remove absolute path to perl and replace with /usr/bin/env perl
98588273b1 kernel: allow selecting RTC drivers on targets without explicit RTC support
f30114c7c4 dropbear: fix procd interface trigger install
3e7f191008 include/packages-defaults.mk: Remove LARGEFILE option
a1392e08c5 netifd: return error status in reload_service
10182cb2c6 grub2: update to 2.02~rc2
38ea91ea9a base-files: use restart if no reload hook for service
9b24d99b91 iproute2: add libgenl.h and ll_map.h to InstallDev section
94597229c3 busybox: fix installation of cron and ntpd scripts in the default config
9ce30f7175 kernel: move initramfs's init script out of base-files
c8a0f3aa29 target.mk: check that CPU_TYPE has known CPU_CFLAGS mapping
977db9f08a scripts/download.pl: fix error message on hash mismatch
7fb03d9610 netifd: fix fw3 warnings in dhcp script
f69d73f1b2 build: allow specifying flow-control to grub on serial console
91821c8c0b kexec-tools: get kexec running on MUSL and x86 hardware
affff02798 busybox: don't install NTP scripts if NTP isn't configured
7ccfa826ee ar8327: Add workarounds for AR8337 switch.
0aafbf6c00 build: fix STAMP_PREPARED with quilt
80304ace58 lantiq: remove lantiq_board_model, it is unused
8be5b12ea1 lantiq: remove lantiq_board_name, use the generic function instead
0f0d742ae3 lantiq: move lantiq_board_detect() to 03_preinit_board.sh
f173464f13 base-files: add generic board_name function to functions.sh
62a8252a0f mac80211: Fix race condition leading to wifi interfaces not coming up at boot sometimes.
5f03ce1213 scripts: only generate config from feature flag if fully match
f7f69130e5 lzo: Update to 2.10
6ba0cc14e9 tools/coreutils: Update to 8.27
100553d605 tools/libressl: Update to 2.5.1
25fe034861 tools/dosfstools: Update to 4.1
ed4976d884 tools/sed: Update to 4.4
7263e3cdca lldpd: bump to 0.9.6
3225fbfcbf x86: image: drop duplicated copy of bzImage into vmlinuz
37aae44a47 libnl: Fix building with uClibc
950439234e toolchain: add musl libc.so to external toolchain
cfb5a550e4 iwcap: fix handling kill signal during dump
1411493569 x86: image: drop unneeded grub call
58e0c0feec x86: image: drop unused ROOTDELAY variable
05f0b8d18b ccache: update to 3.3.4
15efa09507 base-files: add submission service port
56b9f0ffc0 procd.sh: use parameterized respawn values
28c9731984 toolchain: Allow external toolchains to specify libthread-db
2dd9b62f82 rssileds: Fix build with external toolchains
2d31ec4c1b adb: Also pass TARGET_CPPFLAGS
ec395eeb17 swconfig: Link with libubox
c6dd059a9a px5g: Fix TARGET_LDFLAGS and add TARGET_CPPFLAGS
12b811a609 omcproxy: Update to latest HEAD
1e3ff02ea5 bsdiff: Also pass down TARGET_CPPFLAGS
051a33e7c9 thc-ipv6: Allow overriding CFLAGS
a91d8dd162 tools/m4: update 1.4.18
acd481470c build: get rid of FIND_L from host.mk
11cd6077ba build: unsilence move command
903a404663 build: skip headers install and config on make target/linux/prepare
a7fc27edce build: make Host/Install/Default use Host/Compile/Default with an extra argument
94f079e338 build: Pass -iremap gcc option as a single argument
3056122bf7 toolchain/gcc: parallelize make install
a33b0ced78 toolchain/musl: parallelize make install
1d0f7e3136 imagebuilder: make submake invocations less verbose
bdb05f5ef5 gcc: remove obsolete uclibc patch
90a43e508e toolchain/gcc: reduce source directory size by about 420 MB
82615922b0 bcm53xx: suppress osafeloader info error messages during flashing
c566a9e563 toolchain: Broaden the executable loader pattern
3387158e45 build: Suffix build directory with _$(LIBC) for external toolchains
2428b6d6b6 tools/sstrip: Fix compile under standard linux.
50b478956a openssl: update to 1.0.2n
135aa3ba7e base-files: upgrade: make get_partitions() endian agnostic
207bcea1de cyassl: update to wolfssl 3.12.2 (1 CVE)
3bb881862b mdadm: fix parameter quoting
6c1b6e8221 mdadm: Fix config generation
4fc0fb3ca3 mdadm: Do not check RUN_DIR
157b892994 kernel: remove out of tree direct-io disable hack
adc9f935c3 utils/mdadm: Update to 4.0
8bf67f63b9 mdadm: extend uci config support
4af145ea67 rules.mk: make PKG_CONFIG_DEPENDS properly track string values
2b664499cd kernel: bump 4.4 to 4.4.103 for 17.01
ed82c52a4a uqmi: also try newer pin verification
b41a2e646e opkg: bump to version 2017-12-08
f5f5f583f9 hostapd: backport fix for wnm_sleep_mode=0
19ebc19f54 hostapd: Expose the tdls_prohibit option to UCI
3590316121 dnsmasq: backport infinite dns retries fix
060b7f1fbb curl: apply CVE 2017-8816 and 2017-8817 security patches
4b5861c47d mt76: update to the latest version
f19d47f848 tools: patch various gnu tools for macOS 10.13
e5a10bc0fc samba36: backport an upstream fix for an information leak (CVE-2017-15275)
d77fe9219a ramips: backport MT7628 pinmux fixes
9601e6a0e2 ramips: add missing reset button for Nexx WT1520
0946ec0f46 wireguard: bump to snapshot 20171127
The previous locking mechanism was not atomic, hence it was possible
that a killed ebtables process would leave the lock file in place which
in turn made future ebtables processes wait indefinitely for the lock to
become free.
Fix this by using flock(). This also simplifies code quite a bit because
there is no need for a custom signal handler or an __exit routine
anymore.
Signed-off-by: Sven Eckelmann <sven@narfation.org>
7f3dab2fc3 kernel: bump 4.4 to 4.4.102
d3f40aabba wireguard: bump to 20171122
7ec639451d ramips: fix Planex CS-QR10 device packages
6cfa7e5788 ramips: fix DCH-M225 support
e626942c33 dnsmasq: load instance-specific conf-file if exists
d64c0e54a5 rpcd: update to version 2017-11-12
ecaad8b2cb brcm47xx: fix switch port mapping on D-Link DIR-330
d851d7fa56 wireguard: fix portability issue
8751bd771d wireguard: move to kernel build directory
ed571c14e0 wireguard: bump to 0.0.20171111
c9fb48a432 procd: update to latest git HEAD (fixes and improvements)
cda8ec7dd8 openssl: update to 1.0.2m
421754191d brcm47xx: fix switch port mapping on Asus RT-N12 and RT-N16 models
95824b9bf6 rpcd: update to the latest version from 2017-11-09
792559f25b mountd: bump to git HEAD version (optimization fixes)
a0ef1c478a functions.sh: fix default_postinst function
